|
Here are Hoffmann's videos for the Neo and 58 if that would help. https://www.youtube.com/watch?v=Ye5Amz7ddYw https://www.youtube.com/watch?v=3X84AYoNEQw
|
# ? Jan 11, 2022 19:58 |
|
|
# ? May 25, 2024 13:21 |
nwin posted:Yeah they make great espresso. A few pages ago there’s one guy talking about them. yeah imo the 58 is the nicest of all the modern non-italian levers, but it's also the most expensive compared to its immediate competition and preheating is a mixed blessing, i like being able to mostly ignore it on my robot and bang out shots in like 3 minutes start-to-finish, though i'm sure some very light roasts would be better on the 58. i also agree with hoffmann that the big power brick design sucks bad, it's really a baffling solution to a problem when everything else about the machine is so elegant and well-designed robot is still great for me, my only upgrade has been to buy a 57.5mm screen for it and an extra basket so I can do a second shot quickly without having to clean the first out
|
|
# ? Jan 11, 2022 20:09 |
|
eke out posted:yeah imo the 58 is the nicest of all the modern non-italian levers, but it's also the most expensive compared to its immediate competition and preheating is a mixed blessing, i like being able to mostly ignore it on my robot and bang out shots in like 3 minutes start-to-finish, though i'm sure some very light roasts would be better on the 58. i also agree with hoffmann that the big power brick design sucks bad, it's really a baffling solution to a problem when everything else about the machine is so elegant and well-designed I’ve thought about a second basket but it’s me and my wife so it’s not usually too bad. I haven’t bothered with a screen. Does that just save you from washing the shower screen off in between uses? You’ve gotta wash the puck screen off in between, right? I’m definitely thinking about a la pavoni or other lever at some point, just to have the steaming ability built in, but my robot is just so loving easy to use. My Niche Zero just shipped…this loving hobby…I went from “oh a hand grinder is good enough, who the gently caress pays $700 for a grinder?” To “oh sweet I need that.”
|
# ? Jan 11, 2022 20:18 |
nwin posted:I’ve thought about a second basket but it’s me and my wife so it’s not usually too bad. I haven’t bothered with a screen. Does that just save you from washing the shower screen off in between uses? You’ve gotta wash the puck screen off in between, right? screen's more about even distribution of flow across the puck, as far as i understand, similar to what putting a paper filter over the top does, reduces channeling haven't had a chance to try it much but the real big espresso nerds all seem to agree on this, so i figured why not
|
|
# ? Jan 11, 2022 21:06 |
How many shots out of 10 do you guys nail with these levers? I had a budget system years back with a preciso and gaggia, but had a poo poo number of hits and gave up. I currently have a capresso for pour over, so I'd likely get one of these finer hand grinders and a lever for occasional use, not daily
|
|
# ? Jan 11, 2022 21:08 |
|
My hit rate with my La Pavoni is much much higher than with my Gaggia. Once you get technique down you can do more to control flow rate and effectively compensate for incorrect grind size. I'd say I'm at a 95% hit rate, I occassionly make something undrinkable on my very first pull off a new bean but after dialing in it's all golden.
|
# ? Jan 11, 2022 21:40 |
|
Not strictly coffee related, but I couldn’t believe I found this limited edition Fellow Stagg at a local thrift store for $45. It’s brand new.
|
# ? Jan 11, 2022 21:48 |
|
Google Butt posted:How many shots out of 10 do you guys nail with these levers? I had a budget system years back with a preciso and gaggia, but had a poo poo number of hits and gave up. I currently have a capresso for pour over, so I'd likely get one of these finer hand grinders and a lever for occasional use, not daily 9 out of 10 maybe? I do medium to dark roast and don’t play with beans much. If I experimented or used lighter roasts my success would probably be less since I’d spend more time dialing in.
|
# ? Jan 11, 2022 22:09 |
drat okay, that's awesome. So basically, assuming I get a hand grinder to pair, what's the cheapest press worth buying?
|
|
# ? Jan 11, 2022 22:14 |
|
Google Butt posted:drat okay, that's awesome. So basically, assuming I get a hand grinder to pair, what's the cheapest press worth buying? I’d say the flair signature. It comes with a pressure gauge which is helpful to eliminate another unknown variable. It’s $249. I wouldn’t bother with the Neo because you’re planning to get a good hand grinder so no need for the pressurized portafilter. If you do milk drinks, either a cheap frother from amazon/ikea or a nanofoamer and a steel pitcher. Edit: I would check out some videos on the workflow like James Hoffman or sprometheus. Just so you know what you’re kinda getting into. Like I said, it was too finicky for me and I love the robot, but it’s also $400+. This is a quick link on IG https://www.instagram.com/reel/CYgiN7Wh4th/?utm_medium=share_sheet nwin fucked around with this message at 22:41 on Jan 11, 2022 |
# ? Jan 11, 2022 22:32 |
|
Google Butt posted:How many shots out of 10 do you guys nail with these levers? Yeah after the first month of learning, I only really miss the mark when I have a new bean. Within 2 shots of a new bean I'm really enjoying my shots, and milk can always cover any mistakes in that dialing in process.
|
# ? Jan 11, 2022 23:03 |
|
Crain posted:Finally got my machine last night. There's something very wrong with your process. If you can't properly tamp your puck without your shot seizing up and you are clogging your grinder, my guess would be that you're grinding much too fine. What grinder and machine are you using?
|
# ? Jan 12, 2022 00:10 |
|
qutius posted:I am going to have about 2k to spend on an upgraded espresso setup. I've been rocking a Baratza Preciso for years and have been happy with the grinder but I want a step up. I just swapped my Breville Infuser for a Lelit MaraX at the beginning of the year and I'm loving it - huge upgrade in every way. I did so much research and just kept coming back to it. A few of the highlights:
Having said all that, if you really don't need steaming capabilities, the Flair 58 and the Cafelat Robot both supposedly produce fantastic results, as does the steam wand-less Quick Mill Carola Evo (which is an E61 single boiler without a steam wand). Edit: I'm sorry to say that neither the MaraX nor the Carola Evo are available off of Clive Coffee's website, but they stock other Lelit and Quick Mill machines. If you're truly locked in to a specific vendor I'm sure you could request a special order for a competitive price. Happy Pizza Guy fucked around with this message at 00:14 on Jan 12, 2022 |
# ? Jan 12, 2022 00:10 |
Google Butt posted:How many shots out of 10 do you guys nail with these levers? I had a budget system years back with a preciso and gaggia, but had a poo poo number of hits and gave up. I currently have a capresso for pour over, so I'd likely get one of these finer hand grinders and a lever for occasional use, not daily Yeah, like others said, you'll maybe have a bad shot dialing something new in (especially with less forgiving lighter roasts), but the robot is a consistent enough machine that it's rare to not be able to pull good shots on coffees you're used to, assuming you can stay consistent with grind/puck prep/etc.
|
|
# ? Jan 12, 2022 00:22 |
|
Happy Pizza Guy posted:I just swapped my Breville Infuser for a Lelit MaraX at the beginning of the year and I'm loving it - huge upgrade in every way. I did so much research and just kept coming back to it. A few of the highlights: Great feedback, and exactly the kind of response I was hoping to get. I mention Clive only because I'm in Portland and I drive by their storefront often. I have heard nothing but good things and wouldn't mind giving them my money since they'd be my local resource for any issues, returns, etc. I will give them a call about the MaraX since they do sell other Lelit machines as mentioned. When it comes to milk drinks, I don't mind them. A great cortado hits all my buttons for sure, but I'd only drink one of those compared to 2 or 3 other shots in my day to day coffee drinking. When it comes to the grinder, I've had my Preciso so long, and it has served me so loving well, I really don't mind replacing it with $700 - 800. I have gotten my monies worth from that grinder, from a cross country move to using it in my truck while I camp, getting an upgrade there seems more than reasonable. Kicking up the budget a bit isn't out of the question either, but it wouldn't be by much at this point. Thanks again for the reply!
|
# ? Jan 12, 2022 03:11 |
|
qutius posted:I am going to have about 2k to spend on an upgraded espresso setup. I've been rocking a Baratza Preciso for years and have been happy with the grinder but I want a step up. I bought my current setup from Clive and they are very nice and easy to work with. With $2,000 to spend and a focus on just espresso, I think your instinct to go with the Lilit Victoria is a good one. Moving from a single boiler to a dual boiler or heat exchanger will run you at least an extra $500 and you don't need it. The Victoria has a temp control PID and pre-infusion, so it's the obvious single boiler choice. Spend the money you save on the grinder. The Eureka Mignon Oro would be the way to go if you want to stick with Clive for the grinder too. I single dose with a Mignon Silenzio and it does OK even though it isn't really designed for single dosing. I bet the Oro would be a nice upgrade. The Niche would be another good option, especially if you want to make coffee other than espresso. The continuous adjustment on the Mignon grinders makes it a pain to do anything other than espresso in my experience.
|
# ? Jan 12, 2022 04:45 |
|
consensual poster posted:I bought my current setup from Clive and they are very nice and easy to work with. With $2,000 to spend and a focus on just espresso, I think your instinct to go with the Lilit Victoria is a good one. Moving from a single boiler to a dual boiler or heat exchanger will run you at least an extra $500 and you don't need it. The Victoria has a temp control PID and pre-infusion, so it's the obvious single boiler choice. Spend the money you save on the grinder. The Eureka Mignon Oro would be the way to go if you want to stick with Clive for the grinder too. I single dose with a Mignon Silenzio and it does OK even though it isn't really designed for single dosing. I bet the Oro would be a nice upgrade. The Niche would be another good option, especially if you want to make coffee other than espresso. The continuous adjustment on the Mignon grinders makes it a pain to do anything other than espresso in my experience. Awesome, that's good feedback as well. PID and pre-infusion are the two things I really want. Any guests I have over aren't really looking for milk drinks and if they are, banging some milk out after their shot will be easy so the dual boiler/heat exchanger is a pretty moot point for me the more I think about it. And to be honest, since getting my current setup, I haven't made coffee any other way besides espresso at home. I still have a kettle and the CCD, but I only use it when going camping at this point. I will likely just keep the Preciso around for non-espresso grinding or toss it into my mobile rig and call it a day. The Oro does look appealing. I'm to the point where I'll give Clive a call or see if I can stop in given the current covid situation and see what their suggestions are, but it is feeling more and more like I have things pretty well narrowed down. Can't wait!
|
# ? Jan 12, 2022 04:58 |
|
eke out posted:buy a 57.5mm screen for it and an extra basket so I can do a second shot quickly without having to clean the first out When you say you bought a screen as an upgrade, are you talking about getting a mesh screen to replace the filter screen Robots already come with? Or do you use it some other way?
|
# ? Jan 12, 2022 11:11 |
.Z. posted:When you say you bought a screen as an upgrade, are you talking about getting a mesh screen to replace the filter screen Robots already come with? Or do you use it some other way? you put it on top in place of a paper filter. see, e.g. https://www.youtube.com/watch?v=Bks7Li6642M
|
|
# ? Jan 12, 2022 13:40 |
|
I got a knockoff screen like that and it's worked pretty well so far. Sadly I've got a Silvia so the screw locking in the shower screen means I have to underdose pretty heavily to not bend/warp the screen.
|
# ? Jan 12, 2022 14:07 |
|
Blehhhhhhh So as previously mentioned I recently got back into coffee after a long absence, on the basis that I would only drink good coffee (i.e. specialty shops or home-made). Today I was on site all day with no access to anything after my morning cup of Aeropress at home. So at coffee time I wandered to the green room and saw they had a modern-looking commercial bean-to-cup machine, and I thought I'd try it just to see. I picked an espresso - it had a round LCD screen with a pressure gauge on it (so you know it's real espresso! because pressure!). The coffee came shooting out in about 5 seconds and managed to taste both under and overextracted at the same time. I may need to become That Guy, asking for hot water for his "funny coffee syringe"
|
# ? Jan 12, 2022 19:37 |
|
eke out posted:you put it on top in place of a paper filter. So you are using the mesh screen to completely replace the Robot's included filter screen, correct? Or are you using the mesh filter alongside the Robot's included filter screen? Sorta like how this guy is using both a paper filter + the Robot's filter screen? https://www.youtube.com/watch?v=MNqyD78-Hwc Though in either case, have you found it made for a noticeable improvement in shot quality?
|
# ? Jan 12, 2022 19:44 |
.Z. posted:So you are using the mesh screen to completely replace the Robot's included filter screen, correct? just bought it, won't get to try it out till it gets here later this week but i believe you have to put the robot's filter on top still that said, i do think generally putting paper filters on tops is optional but makes shots a little bit better. i kinda expect a similar marginal improvement with the screen, enough you can notice but probably still pretty subtle -- and even if that's all it is i'll be happy, as i hate having yet another disposable paper product to buy eke out fucked around with this message at 20:46 on Jan 12, 2022 |
|
# ? Jan 12, 2022 20:03 |
|
Gonna do a descale and backflush tomorrow back to back on my Breville infuser. Is there an order I should go in?
|
# ? Jan 12, 2022 22:56 |
drat the robot is a beautiful device, kind of out of my budget right now since I'd have to buy a grinder, but drat
|
|
# ? Jan 12, 2022 23:12 |
|
Google Butt posted:drat the robot is a beautiful device, kind of out of my budget right now since I'd have to buy a grinder, but drat Depending where you’re looking it’s not as bad. Cafune in Canada offers $10 shipping to the states and usually has a 10% off coupon. You can also resell the robot for basically what you spent if you decide it’s not for you. Sorry, done playing devils advocate but I love my robot.
|
# ? Jan 12, 2022 23:37 |
|
eke out posted:just bought it, won't get to try it out till it gets here later this week but i believe you have to put the robot's filter on top still Got it, hope it proves worthwhile. I got my Robot before the paper filters started being a thing and have not tried it out still. On the topic of upgrades, I got the hands and thought they were a significant improvement to usage and comfort. https://www.cafelatstore.com/products/robot-hands https://prima-coffee.com/equipment/cafelat/comfortable-mittens-cafel-sp Google Butt posted:drat the robot is a beautiful device, kind of out of my budget right now since I'd have to buy a grinder, but drat I love my Robot, but it's not like it pulls better shots than the Flair. It's just less fussy. You don't have to preheat anything and cleanup is really quick. Also Flair's got arguably better ergonomics.
|
# ? Jan 13, 2022 00:22 |
|
.Z. posted:Got it, hope it proves worthwhile. I got my Robot before the paper filters started being a thing and have not tried it out still. Agreed on flair’s ergonomics. I bought the robot with mittens and tried taking them off for a few shots-hated it.
|
# ? Jan 13, 2022 00:31 |
|
It's not a bad idea to preheat the basket for light roasts, though. I just run some hot water from my dispenser through before I put grounds in, simple enough
|
# ? Jan 13, 2022 07:07 |
|
Spiggy posted:I got a knockoff screen like that and it's worked pretty well so far. Sadly I've got a Silvia so the screw locking in the shower screen means I have to underdose pretty heavily to not bend/warp the screen. I've replaced the original shower screen with this one a few years ago, and it's working great. I'm really not sure why they decided to go with such a bulky hex screw in the first place. e: looks like the guy running that site kind of .. quit in 2015? http in a webshop isn't a great sign either. Fruition has one that seems like a possible/promising alternative, but I can't vouch for that one personally. Scrapfarmer fucked around with this message at 11:08 on Jan 13, 2022 |
# ? Jan 13, 2022 10:20 |
|
not to spam this thread with "my coffee journal", but I have finally hit the point with the v60 where the process of brewing two cups is a calming little ritual, just like making tea or coffee with the aeropress, and I feel like that is a huge step. I consistently get nice tasting cups from it, and I've stopped fretting over minute little details as much.
|
# ? Jan 13, 2022 11:07 |
|
ulvir posted:not to spam this thread with "my coffee journal", but I have finally hit the point with the v60 where the process of brewing two cups is a calming little ritual, just like making tea or coffee with the aeropress, and I feel like that is a huge step. I consistently get nice tasting cups from it, and I've stopped fretting over minute little details as much. Props. That also means you probably have the muscle memory down enough to make it in the morning and avoid the coffee paradox.
|
# ? Jan 13, 2022 13:50 |
|
JohnCompany posted:Props. That also means you probably have the muscle memory down enough to make it in the morning and avoid the coffee paradox. Didn't Heisenbrot solve that? Or did he merely posit it.
|
# ? Jan 13, 2022 17:49 |
|
Is James Hoffmann on a well deserved vacation and will come back with more content or have we reached the end of the third wave?
|
# ? Jan 15, 2022 11:04 |
|
Lord Stimperor posted:Is James Hoffmann on a well deserved vacation and will come back with more content or have we reached the end of the third wave? He got his 1 million YouTube subscribers and peaced out!
|
# ? Jan 15, 2022 11:58 |
|
I just checked the channel again and there's a new one. Brunch saved!
|
# ? Jan 15, 2022 13:37 |
|
Lord Stimperor posted:Is James Hoffmann on a well deserved vacation and will come back with more content or have we reached the end of the third wave? Was probably holidays.
|
# ? Jan 15, 2022 19:20 |
|
qutius posted:Awesome, that's good feedback as well. PID and pre-infusion are the two things I really want. Any guests I have over aren't really looking for milk drinks and if they are, banging some milk out after their shot will be easy so the dual boiler/heat exchanger is a pretty moot point for me the more I think about it. I'll rep the Oro Single Dose, the enormous burrs are magic. I pre-ordered one months ago and have been using it for a bit. The Niche soundly beats it in cord management and I would love if anyone would address this as well as they did, also the Niche dial is easier to understand. The Oro dial goes from 0-9 but not just once, you can spin it over and over so it's a bit of a guess what you're doing at the beginning and I started closer to drip and had to crank it down. That said, it makes such tiny adjustments you can make smaller changes easier than the Niche. Once you're dialed, it's a non issue though. Glad to answer questions. I keep an old Vario around for non-espresso so I'm not dialing in espresso every time.
|
# ? Jan 16, 2022 00:36 |
|
having finished a bag of light roasted coffee and a bag of medium roasted coffee, I honestly don’t understand why the darker stuff exists for brewer coffee. the light roasted stuff is objectively better in every way, and I’m never buying anything else from here on out
|
# ? Jan 16, 2022 19:31 |
|
|
# ? May 25, 2024 13:21 |
|
ulvir posted:having finished a bag of light roasted coffee and a bag of medium roasted coffee, I honestly don’t understand why the darker stuff exists for brewer coffee. the light roasted stuff is objectively better in every way, and I’m never buying anything else from here on out Because taste, experience, and preference is subjective, not objective. Your preference is for light roast is awesome, and there’s a lot of awesome for you to explore. But it’s not for everyone and that’s okay too.
|
# ? Jan 16, 2022 19:47 |