|
e.pilot posted:Comedy option it’s a non boost wheel in a boost frame. I was thinking 'axle too long and bottoming out on the end of the threads'. Should be obvious though. Maxles have the length written on them usually.
|
# ? Jul 17, 2022 19:02 |
|
|
# ? May 27, 2024 22:11 |
|
pinarello dogman posted:I was thinking 'axle too long and bottoming out on the end of the threads'. Should be obvious though. Maxles have the length written on them usually. Actually this would make the most sense now that I think about it, the loosening up in its own, the breaking right at the start of the threads, if it’s not something janky with the frame from the factory I bet this is it.
|
# ? Jul 17, 2022 19:04 |
|
Wouldn't your shifting be really janky if the DS side rear triangle were loose and yawing around?
|
# ? Jul 17, 2022 23:07 |
|
kimbo305 posted:Wouldn't your shifting be really janky if the DS side rear triangle were loose and yawing around? That is how my buddy remembers he hasn't tightened his in a few rides should he forget.
|
# ? Jul 18, 2022 00:23 |
|
Bud Manstrong posted:I wonder if the frame is off and the dropouts aren’t aligned. Thought about this. I have sliding dropouts and have tested this by attempting to install the thru axle without a wheel, tightening it and then loosening the adjustable sliders and re-torquing everything. I also have the dropouts adjusted as far rear as possible to eliminate that variable. e.pilot posted:Comedy option it’s a non boost wheel in a boost frame. I wish the frame was boost as it would be a lot easier to swap wheels between my two bikes. pinarello dogman posted:I was thinking 'axle too long and bottoming out on the end of the threads'. Should be obvious though. Maxles have the length written on them usually. e.pilot posted:Actually this would make the most sense now that I think about it, the loosening up in its own, the breaking right at the start of the threads, if it’s not something janky with the frame from the factory I bet this is it. Thought about this as well since the frame didn't come with an axle when I bought it. Went through the Robert's Axle Project website and have since tried a few lengths. The 175mm is just about perfect with the threads reaching all the way through the dropout without sticking out and the head bottoming out correctly. kimbo305 posted:Wouldn't your shifting be really janky if the DS side rear triangle were loose and yawing around? I will notice my rear wheel feeling like the hub preload is off and my tire will feel like it's squirming more.
|
# ? Jul 18, 2022 03:58 |
|
spwrozek posted:That is how my buddy remembers he hasn't tightened his in a few rides should he forget. I had super weird shifting today and my axle was loose and b-bolt was half backed out. I'd Checked them last ride too. Weird. I wish i could blame that on crashing but nah it was all me.
|
# ? Jul 18, 2022 06:07 |
|
Good deal on Freerider Pros at Jenson USA right now ($88 w/ free shipping). Black/yellow and grey available in most sizes. https://www.jensonusa.com/Five-Ten-...RBoCEaMQAvD_BwE
|
# ? Jul 18, 2022 16:56 |
|
spwrozek posted:Good deal on Freerider Pros at Jenson USA right now ($88 w/ free shipping). Black/yellow and grey available in most sizes. https://www.jensonusa.com/Five-Ten-...RBoCEaMQAvD_BwE Fantastic shoes, really a lot nicer than the earlier version freeriders.
|
# ? Jul 18, 2022 17:03 |
|
I spent Sunday at a TORCA trail day helping get a vandalized trail running again. Someone had chainsawed all the wood features making it unsafe and unrideable. Don't know for sure who did it but all evidence makes it look like it was retaliation for the landowner bulldozing another trail in the area. It was cool to see 50 people turn out and work hard to get it up and running again. For my part I spent the day making a pile of rocks to reshape a section of the trail and make a roller the a line. The rocks in the background with a board leaning on them are the eventual lip for an optional hip jump but that will be finished another day. Rocks are heavy and the amount of buckets of gold this took to fill in was pretty crazy. My computer toucher body will be feeling this for a while.
|
# ? Jul 18, 2022 17:20 |
|
spwrozek posted:Good deal on Freerider Pros at Jenson USA right now ($88 w/ free shipping). Black/yellow and grey available in most sizes. https://www.jensonusa.com/Five-Ten-...RBoCEaMQAvD_BwE Good lookin out. They also have cheap smith squad goggles I've been meaning to pick up.
|
# ? Jul 18, 2022 17:43 |
|
Boogalo posted:Good lookin out. They also have cheap smith squad goggles I've been meaning to pick up. I got the Smith Attack Mag for cheap recently. pretty drat nice.
|
# ? Jul 18, 2022 18:26 |
|
Any recommendations on lightweight, short sleeve mountain bike jerseys? Now I wear some of my road stuff (too constrictive) or random "athletic wear". I'm looking for something not too baggy. Not being plastered in goofy logos is a big plus.
|
# ? Jul 18, 2022 18:36 |
|
marsisol posted:Any recommendations on lightweight, short sleeve mountain bike jerseys? Now I wear some of my road stuff (too constrictive) or random "athletic wear". I'm looking for something not too baggy. Imo you really gotta go in to a shop and try a bunch on. Most shops will have 50% noname jerseys so no worries about finding something without logos. I've had good luck with Troy Lee Designs stuff and fox stuff. Also Sombrio.
|
# ? Jul 18, 2022 18:43 |
|
I've been getting UPF rated poly shirts on amazon. They're cheap and just come in colors unless you want jersey features like back pockets.
|
# ? Jul 18, 2022 18:45 |
|
Hand up has good Hawaiian short sleeve jerseys if you don't mind a button up. Their regular short sleeve jerseys are also good.
|
# ? Jul 18, 2022 18:45 |
|
VelociBacon posted:Generally you shouldn't use it for something that has a torque spec and you expect to be installing and uninstalling a lot, it can change the resistance under tightening and result in undertorque. As I understand it. Should I be more careful with torque spec on my MTB and road thru axles? I've always just hand tightened them. Is there a large effect on beating preload? Even on cartridge bearings? marsisol posted:Any recommendations on lightweight, short sleeve mountain bike jerseys? Now I wear some of my road stuff (too constrictive) or random "athletic wear". I'm looking for something not too baggy. I just picked up a bunch of short and long sleeve REI hiking shirts. Simple colors and no glaring TLD logos. And they're half the price of every MTB brand jersey that I've seen. https://www.rei.com/product/163975/rei-co-op-sahara-t-shirt-mens https://www.rei.com/product/163977/rei-co-op-sahara-long-sleeve-t-shirt-mens Edit: They're also UPF 30 which is nice. Edit2: Fixed all my horrible typos after being quoted. PolishPandaBear fucked around with this message at 19:11 on Jul 18, 2022 |
# ? Jul 18, 2022 18:46 |
|
marsisol posted:Any recommendations on lightweight, short sleeve mountain bike jerseys? Now I wear some of my road stuff (too constrictive) or random "athletic wear". I'm looking for something not too baggy. I'm a fan of the HandUp Jersey https://handupgloves.com/collections/short-sleeve-jersey
|
# ? Jul 18, 2022 18:48 |
|
I kind of just want to only buy wool stuff now. poly is just so smelly. I use the Patagonia Capilene Cool Trail Shirt but they are really not as order resistant as they claim. I am curious to grab something with NuYarn though. spwrozek fucked around with this message at 19:06 on Jul 18, 2022 |
# ? Jul 18, 2022 18:59 |
|
marsisol posted:Any recommendations on lightweight, short sleeve mountain bike jerseys? Now I wear some of my road stuff (too constrictive) or random "athletic wear". I'm looking for something not too baggy. Only buy jerseys and socks on vacation (or from the bearpope thread). They're overpriced relative to other non-sport clothes, might as well make sure yours look cool and say that you're a cool person who bikes places https://forums.somethingawful.com/showthread.php?threadid=3885509&pagenumber=1&perpage=40
|
# ? Jul 18, 2022 19:01 |
|
spwrozek posted:I kind of just want to only buy wool stuff now. poly is just so smelly. Tide sport seems to make mine smell like laundry detergent instead of BO.
|
# ? Jul 18, 2022 19:03 |
|
I know it's not mountain biker style, but this jersey is really nice for $15 https://www.amazon.com/gp/product/B08V5G342X/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
|
# ? Jul 18, 2022 19:07 |
|
PolishPandaBear posted:Should I be more cafefule with tourque spec on my MTB and road thru axels? I've always just hand tightened them. Is there a large effect on beating preload? Even on cartidge breaings? I'm not a mechanic or an engineer but I would tighten it to torque spec and see what that feels like, then just replicate it in the future without the torque wrench. I have all the equipment to torque things properly and I still do an extra 10% so I'm not worrying about it. I also use antiseize on nearly every bolt which would result in an overtorque if I did it to the printed spec. I really just think about the materials, think about the purpose of the fastener, and tighten things to a reasonable degree. Of course the proper way is to use a torque wrench 100% of the time. I don't think that you actually put a compressive force through the bearing when you tighten an axle on a modern bike. Especially if it's a cone washer situation or whatnot where you preload the hub bearings that way. I could be way off I only see my own gear.
|
# ? Jul 18, 2022 19:07 |
|
VelociBacon posted:I'm not a mechanic or an engineer but I would tighten it to torque spec and see what that feels like, then just replicate it in the future without the torque wrench. I have all the equipment to torque things properly and I still do an extra 10% so I'm not worrying about it. I also use antiseize on nearly every bolt which would result in an overtorque if I did it to the printed spec. Why so? Does anti seize affect the torque differently than grease? I feel like all torque specs on bikes take into account things being greased and aren’t for dry torque
|
# ? Jul 18, 2022 19:25 |
|
Levitate posted:Why so? Does anti seize affect the torque differently than grease? I feel like all torque specs on bikes take into account things being greased and aren’t for dry torque I don't think the torque specs account for anything that lubricates the threads. Maybe I'm wrong, if so I feel vindicated for overtorquing relative to spec.
|
# ? Jul 18, 2022 19:44 |
|
spwrozek posted:Good deal on Freerider Pros at Jenson USA right now ($88 w/ free shipping). Black/yellow and grey available in most sizes. https://www.jensonusa.com/Five-Ten-...RBoCEaMQAvD_BwE thanks
|
# ? Jul 18, 2022 19:44 |
|
VelociBacon posted:I don't think the torque specs account for anything that lubricates the threads. Maybe I'm wrong, if so I feel vindicated for overtorquing relative to spec. If they don't that's dumb as hell since nearly everything tells you to grease threads and also has a torque spec
|
# ? Jul 18, 2022 20:34 |
|
Dog Case posted:If they don't that's dumb as hell since nearly everything tells you to grease threads and also has a torque spec If that's the case then sure the torque specs are for that. Are they communicating that in a manual somewhere?
|
# ? Jul 18, 2022 20:56 |
|
Just googling really quick and the first actual manufacturer manual I found is Surly telling you to grease threads and torque to spec higher than what's on my non-Surly axles. So I'd guess any spec around 15nm is probably greased? Edit: Oh wait that's their weird axle with internal threads and separate bolt
|
# ? Jul 18, 2022 21:07 |
|
VelociBacon posted:If that's the case then sure the torque specs are for that. Are they communicating that in a manual somewhere? I can only speak from experience on this, but all Santa Cruz tech sheets tell you where to apply grease, loctite and the torque values. It's pretty handy.
|
# ? Jul 18, 2022 21:51 |
|
VelociBacon posted:... Shouldn't affect preload as there is a solid stack of spacers/axle steps between all the inner races of the bearings that you are compressing, and often a tiny shim between the freehub and hub body bearings. If your wheel has more drag after you tighten it check if the shim has exploded (happened to me on a few hubs)
|
# ? Jul 19, 2022 04:08 |
|
Are mountain bikers people though?
|
# ? Jul 22, 2022 23:12 |
|
That makes me more upset than it should, but I just had to hose dog poo poo from my front tire after my last ride. Dogs need to be banned from multi-use trails because too many of their owners are selfish assholes who won't clean up after their pet. I shouldn't be so excited when one is actually leashed, but that's been my experience locally.
|
# ? Jul 23, 2022 00:30 |
|
mashed posted:Are mountain bikers people though? https://www.instagram.com/reel/CgE-gu7A7D-/?utm_source=ig_web_copy_link Buddy sent me this yesterday. censored shitter
|
# ? Jul 23, 2022 05:35 |
|
Frozen Pizza Party posted:https://www.instagram.com/reel/CgE-gu7A7D-/?utm_source=ig_web_copy_link It's just grass ?
|
# ? Jul 23, 2022 05:42 |
|
I finally switched to tubeless. Riding around the block, watching my rear tire, it's running slightly wider/flatter with the same pressure than when the tube was in. That makes me a bit nervous.Frozen Pizza Party posted:https://www.instagram.com/reel/CgE-gu7A7D-/?utm_source=ig_web_copy_link
|
# ? Jul 23, 2022 14:06 |
|
kimbo305 posted:Yeah, I've been curious ever since someone linked this: Actual physicist Seb Stott explains: Why Shorter Cranks Are Better (According To Science)
|
# ? Jul 23, 2022 15:53 |
|
Frozen Pizza Party posted:https://www.instagram.com/reel/CgE-gu7A7D-/?utm_source=ig_web_copy_link The commitment to not even getting off the trail at all is kinda impressive.
|
# ? Jul 23, 2022 19:01 |
|
Combat Pretzel posted:I finally switched to tubeless. Riding around the block, watching my rear tire, it's running slightly wider/flatter with the same pressure than when the tube was in. That makes me a bit nervous.
|
# ? Jul 23, 2022 19:10 |
|
mashed posted:The commitment to not even getting off the trail at all is kinda impressive. Sometimes you just gotta drop trou and go I guess? In other news, my buddy and I built a jump today, now I want to start an advocacy group and get some cyclist representation in our city with a bike park
|
# ? Jul 23, 2022 22:32 |
|
|
# ? May 27, 2024 22:11 |
|
That's quite a jump, is that on private land or is it already torn down ?
|
# ? Jul 23, 2022 22:48 |