|
widefault posted:What about an ash-bodied Les Paul with a maple neck? I'd rock this just to gently caress with guitarists in the front row.
|
# ? Aug 19, 2022 10:16 |
|
|
# ? May 28, 2024 12:45 |
|
I had a trem on a S570 from 2013 or so and after I got it restrung, tuned up, and nut locked, all it ever needed was minor tweaks of the fine tuners down on the bridge. Those fine tuners made tuning so easy, I wish every bridge had them, HT or not.
|
# ? Aug 19, 2022 13:03 |
|
80k posted:I'm looking into the Helix stomp or the Fractal FM3, but I really don't want to spend all my guitar time on a computer, being overwhelmed with the settings. Curious on any advice from people who have gone this route. I don't even have a Windows or Mac PC so that is another problem. I could envision tweaking things on a phone or tablet, and I saw that someone made an iOS and Android app for Fractal equipment, but the price of the dongle and the app adds another chunk of money to it and not sure how well supported it will be. You don't need a computer to create patches with most modeling gear that I'm familiar with but it does make it considerably easier. You also don't have to spend hours dialing in tones. I created a nice sounding patch on my HX Stomp within about 15 minutes of powering it on for the first time. Granted, I already had some experience using modelers but still, its not really all that complicated. It also depends on if you are the type of person to go down tone tweaking rabbit holes or not. I would probably recommend the HX Stomp if its your first modeler. Fractal stuff is insanely good but obviously much more expensive and complicated. The Stomp sounds great and integrates with a pedal board really well. Its limited by only having six blocks but I havent found that to be an issue, personally. But if youre the kind of person that likes to really dive into tone design, or just want the higher quality models/IRs, it might be worth going straight to the FM3
|
# ? Aug 19, 2022 15:36 |
|
800peepee51doodoo posted:You don't need a computer to create patches with most modeling gear that I'm familiar with but it does make it considerably easier. You also don't have to spend hours dialing in tones. I created a nice sounding patch on my HX Stomp within about 15 minutes of powering it on for the first time. Granted, I already had some experience using modelers but still, its not really all that complicated. It also depends on if you are the type of person to go down tone tweaking rabbit holes or not. Thanks, this helps a lot! I was looking at the Helix Floor vs Stomp, and it seems I'd be happy enough with the Stomp. I did see they also upped it to 8 blocks (from 6) recently. I'd be getting an FRFR powered speaker as well, and really hoping that I like this setup more than my current setup. It may be a tall task, as I am really happy with the sound of my Quilter + cabinet + pedals. My goal is to get rid of pedals and start using banks and presets and explore more amp simulations. Even if the Helix takes pedals well, I'd feel like it's only a moderate success if I can't get rid of all my pedals, cuz I'd still be fiddling and tap dancing.
|
# ? Aug 19, 2022 17:14 |
|
Really that ash/maple LP should have an unbound neck, dot inlays, and a matching unfinished headstock. Maybe 6 in-line instead of 3+3.
|
# ? Aug 19, 2022 17:48 |
|
I'm far from the best/most sophisticated player, but as an apartment dweller, the HX Stomp is one of the best purchases I've ever made, especially since I also play bass. It's also reasonably cheap used or on discount - I bought mine for $450 new when Prymaxe had a 25% off coupon. Other guitar forums are also full of praise for modelers from the Chinese companies like Nux, but I ended up going with HX just due to their extensive history of providing updates and adding new amps/effects. Fractal is very well regarded too, so you can't go wrong with either.
|
# ? Aug 19, 2022 18:29 |
|
curried lamb of God posted:I'm far from the best/most sophisticated player, but as an apartment dweller, the HX Stomp is one of the best purchases I've ever made, especially since I also play bass. It's also reasonably cheap used or on discount - I bought mine for $450 new when Prymaxe had a 25% off coupon. Seconding the praise for the HX stomp. I got it as a gadget to fool around with effects pedals I would otherwise not pay for, and it’s turned into the center of my setup, and almost the only thing I use. There are tons of great sounds in there, and it’s easy to use as just a pedal platform or a full on amp sim.
|
# ? Aug 19, 2022 19:35 |
|
curried lamb of God posted:Other guitar forums are also full of praise for modelers from the Chinese companies like Nux I have the NUX Amp Academy. It doesn't really do a lot of effects, but it does amp modeling with impulse responses. I bought it for practice, but usually I just use my amplug instead because its slightly less fuss. To my ears the NUX sounds pretty good and if I was in a situation of plugging directly into a PA I'd happily use it. If you already have a pedal board of effects you like and you just want something for recording or not having to carry an amp around it's well worth the $189 or whatever I paid for it IMO.
|
# ? Aug 19, 2022 19:48 |
|
it took me almost four years but i'm getting way into minor keys lately. hitting the major V in it is so fun, it sounds kind of "twisted" and ugly in a really cool way
|
# ? Aug 19, 2022 23:41 |
|
That's the dominant baby, bust out that harmonic minor. The real fun one is to pull a Creep and play a III chord in major, it's the dominant of the relative minor of the key.
|
# ? Aug 20, 2022 00:11 |
|
Baron von Eevl posted:Really that ash/maple LP should have an unbound neck, dot inlays, and a matching unfinished headstock. Maybe 6 in-line instead of 3+3. Nah, it's going for the 70's Ash Jazz Bass look. I do wish it had black binding on the neck, but the white matches what's on the headstock. But if the headstock was maple, they could have done black binding, but then the mother of pearl logo might not be visible enough. Maybe I just need to get one custom made. And the parts box did contain a black poker chip. I do like the contrasting switch tip, so I can leave that be.
|
# ? Aug 20, 2022 00:19 |
|
Baron von Eevl posted:That's the dominant baby, bust out that harmonic minor. The real fun one is to pull a Creep and play a III chord in major, it's the dominant of the relative minor of the key. okay i loving HATE that it's in creep because people go "LOL IS THAT RADIOHEAD" (this actually happened to me once before jazz band). i got the major III from the pixies! a band that's cooler!
|
# ? Aug 20, 2022 00:48 |
|
landgrabber posted:okay i loving HATE that it's in creep because people go "LOL IS THAT RADIOHEAD" (this actually happened to me once before jazz band). Go from the root to the 6th instead. Embrace the lydian
|
# ? Aug 20, 2022 01:05 |
|
landgrabber posted:i got the major III from the pixies! a band that's cooler! They’re both cool bands, lg.
|
# ? Aug 20, 2022 06:05 |
|
Baron von Eevl posted:That's the dominant baby, bust out that harmonic minor. The real fun one is to pull a Creep and play a III chord in major, it's the dominant of the relative minor of the key.
|
# ? Aug 20, 2022 12:50 |
|
What's a good budget power supply for pedals to start with? I was thinking 5-8 ports. Was looking at that Harley Benton for $41, but I'm not dropping $30 on shipping for that.
|
# ? Aug 21, 2022 00:31 |
|
It's hard to beat the One Spot for budget power supplies.
|
# ? Aug 21, 2022 00:32 |
|
The Leck posted:Creep makes me laugh because they went after Lana Del Rey for stealing from them after they ripped it off from the Hollies. People just really like using that same I-III-IV-iv progression and melody. any musician/band who sues another for using a similar melody or chord progression in a song with much different lyrics and form is awful and killing the form. for reasons we’ve all discussed a million times. they and everyone who thinks they’re a band of modern day beethovens can gently caress off.
|
# ? Aug 21, 2022 00:36 |
|
luchadornado posted:What's a good budget power supply for pedals to start with? I was thinking 5-8 ports. Was looking at that Harley Benton for $41, but I'm not dropping $30 on shipping for that. I think I have a Donner power supply with like 8 ports I got for $40ish, hasn't blown up yet I have not played much recently as I have been very overwhelmed with Other Things but am looking forward to getting back to recording again when the seas part
|
# ? Aug 21, 2022 00:44 |
|
Took the kids to a Beatles tribute show this afternoon, not a costumes and vintage instruments thing just a really tight cover band. Their "John" was playing through a micced Katana 100, foot switch and everything. Sounded good!
|
# ? Aug 21, 2022 01:05 |
|
luchadornado posted:What's a good budget power supply for pedals to start with? I was thinking 5-8 ports. Was looking at that Harley Benton for $41, but I'm not dropping $30 on shipping for that. If you're staying away from the many-branded 10 output power supply for $40 on Amazon, the TrueTone 1 Spot Combo Pack (as muike is indicating) is the cheapest way to get a lot of outputs from a well-known brand. https://www.sweetwater.com/store/detail/1SpotComboPk--truetone-1-spot-combo-pack I haven't read anyone say their $40 Amazon power supplies went bad on them. I have seen people say that the outputs on those aren't actually isolated, despite whatever the Amazon pages claim. That may not make any difference in reality. It's a big step up in price to get to an isolated supply from a brand known specifically for power supplies. However, those may have some resale value as used if you outgrow them. TrueTone's 1 Spot Pro or Voodoo Labs' Pedal Power offerings are on the lower end of the price scale from those well-known brands.
|
# ? Aug 21, 2022 01:37 |
|
landgrabber posted:any musician/band who sues another for using a similar melody or chord progression in a song with much different lyrics and form is awful and killing the form. for reasons we’ve all discussed a million times. This is too true.
|
# ? Aug 21, 2022 02:22 |
|
landgrabber posted:any musician/band who sues another for using a similar melody or chord progression in a song with much different lyrics and form is awful and killing the form. for reasons we’ve all discussed a million times. I always love hearing the stories behind classical music because it's often 'heard someone play a cool melody somewhere, ripped it off and made it into a sonata/fugue/symphony'.
|
# ? Aug 21, 2022 05:58 |
|
Amazon has some of the 3 color sunburst Firefly FFJA Jazzmaster copies for sale for $139.91 with free shipping. They ship from Firebird Music, which is just the "official" retailer. Same model is on GuitarsGarden.com for $149.91 plus shipping, which is another ~$20-25. GuitarsGarden is the official online retailer. Going to grab one, see how it compres to a Vintage Mod Squier and Affinity Squier.
|
# ? Aug 22, 2022 02:05 |
|
Today was a good day for guitar: - I figured out the problem on my klon circuit and just need to wait for new capacitors to replace the ones I fried - I was practicing alternate picking and something just went off like a light-switch and I was zen picking for a while - My teacher decided to take me out of the dry book learning and is having me learn Pearl Jam's Alive
|
# ? Aug 22, 2022 03:55 |
|
oh monolithic guitar thread - I have come to you in my hour of need. I have a Squier Jazzmaster that I'm thinking of wrapping the bridge posts. I rest the edge of my picking hand on the bridge of any guitar I'm playing. On any other guitar it's fine, but on the Jazzmaster I find that it knocks my bridge out of alignment messing up the intonation and action. I'm not quite as concerned about adjusting the action every week or so back to where I like it or brushing some Loc-Tite on the screw posts, but having the angle of the bridge go forward and back is the thing that really annoys me as it takes me some time to get the bridge back to the position I intonated it in. I don't use the vibrato a ton but I do use it and would like to keep the option of using it open if I can. I've heard Sonic Youth would either wrap it in electrical tape or just buy a Mustang bridge. I've read other people (cough cough Michael Adams) recommend to buy the Mastery bridge but that's a little too much cash for what I'm willing to spend on this. I've also seen people wrap the bridge in aluminum foil. Anyone have any suggestions or tips for this, other than "Buy a Mastery"?
|
# ? Aug 22, 2022 14:26 |
|
Noise Machine posted:oh monolithic guitar thread - I have come to you in my hour of need. Wrap the bridge with electrical tape, yeah. It's essentially free and totally reversible if you don't get on with it. The pivoting bridge is less of an issue on tuning than made out.
|
# ? Aug 22, 2022 20:39 |
Crossposting my new purchase from the bass threadGood Soldier Svejk posted:Following up on this, I did buy the G&L I know some folks are super high on G&L in here and I am sorry for my prior skepticism. Also now that I have a bass that cost me more than $100 I might have a more fun time playing it
|
|
# ? Aug 22, 2022 21:13 |
|
Hell yeah. G&L Tribute gear really does own. I keep hoping for Musician’s Friend to have an ASAT on their daily deal, but alas.
|
# ? Aug 23, 2022 01:19 |
|
I think I found my dream guitar, a blue ASAT Bluesboy:
|
# ? Aug 23, 2022 01:25 |
this neck might seriously be my favorite I've been noodling for hours and I no longer see the weird doodly-dangle on the headstock that used to drive me insane if the others have this same finish on the necks... well I may be in serious trouble.
|
|
# ? Aug 23, 2022 01:44 |
|
it kicks so much rear end when the only adjustment you have to make to your guitar is a trussrod adjustment and you correctly guess the correct amount on first try
|
# ? Aug 23, 2022 03:13 |
|
There are a million tool kits and instructions out there on how to setup a guitar - any particular faves people would like to share?
|
# ? Aug 23, 2022 04:49 |
|
I've had this one for years and it's holding up still: https://reverb.com/item/24915936-cruz-tools-groove-tech-guitar-player-tech-kit
|
# ? Aug 23, 2022 08:26 |
|
As for instructions, I think Sweetwater's guides are pretty good: https://www.sweetwater.com/sweetcare/articles/guitar-setup-part-1-adjusting-the-truss-rod-2/
|
# ? Aug 23, 2022 10:36 |
|
https://www.musiciansfriend.com/guitars/gl-placentia-series-legacy-electric-guitar/l88884000001000 Good deal on a G&L tribute strat in silverburst today. I just ordered one to mess around with. I have a G&L Tribute ASAT that rules, I'm excited.
|
# ? Aug 24, 2022 00:00 |
|
After all my carping yesterday too. The internet gods must be spiting me. Congrats though, that silver burst is pretty killer. I really do like my Tribute Legacy too, just want to get something with a hard tail.
|
# ? Aug 24, 2022 00:08 |
|
https://youtu.be/5P8UZ8cp5co your move, Finnerty
|
# ? Aug 24, 2022 21:55 |
|
NGD! Hurry up FedEx!
|
# ? Aug 25, 2022 15:51 |
|
|
# ? May 28, 2024 12:45 |
|
What's a good budget for an entry-level nylon string? I stopped by a nylon-specialist store in town today to chat and they were showing me a $100 bottom level guitar and a used solid-top for $200. Picked up a method book to flip through. Is it silly to learn fingerstyle on nylon strings if I just want to play arpeggios and chords and sing jazz standards to nobody? e: the solid top was an Aria I think. I know this is very little info to go off of
|
# ? Aug 26, 2022 02:17 |