|
Warlord's epic battles catalogue runs 12.5mm and is a pretty good price. I really like the strip models too. Sadly I don't think that basing would work well for SP though.
|
# ? Sep 3, 2022 21:49 |
|
|
# ? Jun 5, 2024 07:44 |
|
SRF posted:After years of waffling, I'm finally ready to take the plunge and get into Napoleonics. I've even decided on the war of the fifth coalition as the rough period. But now I'm struggling to pick a sale. Initially I had planned on going with 28mm for Sharp Practice, but recently I've felt awfully tempted to just go straight for big(-ish) formations and get some 10mm for General d'Armee. I'm rather fond of the Perry plastics and they look like they'd paint up nicely, but I also love the effect of larger numbers of smaller scale minis - although the smallest I've done so far is 15mm. If you have a 3d printer some great models are starting to become available. Usually they can be printed in either 28mm or 15mm.
|
# ? Sep 3, 2022 23:24 |
|
SRF posted:My issue with 15mm is that it lacks the detail and, perhaps more importantly, cheap plastics of 28mm while not looking nearly as impressive for mass formations as the smaller scales. Full disclosure: if I end up going the GdA route, I'm pretty much dead set on battalions with one base per company with proper distances between figures, i.e. elbow to elbow, which is the primary reason why I'm not particularly interested in starting with SP in 28mm and then building up to GDA - formations in 28mm always seem to end up looking too loose, and I don't get the impression 15mm helps a ton in that regard.
|
# ? Sep 4, 2022 02:19 |
|
Class Warcraft posted:If you have a 3d printer some great models are starting to become available. Usually they can be printed in either 28mm or 15mm. Unfortunately I don't, which is a shame because there seem to be a bunch of great STLs out there. Arquinsiel posted:You want 20mil. It's probably the cheapest option and you can easily base your guys however you want. Do you have any recommendations? 20mm is a scale I hadn't really looked into because, being only familiar with WW2 when it comes to 20mm, I assumed you could either get bendy soft plastic that barely holds a coat of paint or metal minis that are as expensive as (or in some cases more expensive than) 28mm.
|
# ? Sep 4, 2022 07:29 |
|
There are heaps of manufacturers of plastic 1/72nd scale (20mm) Napoleonic figures. Italeri, Zvezda and HaT, to name a few.
|
# ? Sep 4, 2022 07:34 |
|
I love 28mm nappy and I have hundreds of painted Frenchies, but I readily admit that the scale has a lot of cons. Only do 28mm imho if you like painting and you like the nittygritty details. Storage, paint speed, transportation, board size, all those speak for smaller scales. Like, I adore my 28mm armies, but they really don’t make sense from a gameplay perspective. It’s the journey and the spectacle while playing. It’s hard to beat 28mm when it comes to plunking down a gorgeous regiment. But you’ll need an entire bookshelf to store two opposing armies if you want to go big. And they’ll take several years to paint. If you have limited space go for a smaller scale or 28mm skirmish. Or both. As mentioned above I’d look into 6mm and warlord’s epic scale too. The ”problem” of 15mm is that they don’t really quite get all the pros of scaling down compared to even smaller minis. lilljonas fucked around with this message at 14:23 on Sep 4, 2022 |
# ? Sep 4, 2022 14:21 |
|
Endman posted:There are heaps of manufacturers of plastic 1/72nd scale (20mm) Napoleonic figures. Italeri, Zvezda and HaT, to name a few.
|
# ? Sep 4, 2022 14:51 |
|
This is the place to go for 20mm discussion. http://plasticsoldierreview.com
|
# ? Sep 4, 2022 16:09 |
|
Where in the heck can you buy HäT models? Outside of eBay I'm finding nothing, and it's not exactly an easy term to search (hat minis brings up the wrong thing of course)
|
# ? Sep 4, 2022 16:15 |
|
Count Thrashula posted:Where in the heck can you buy HäT models? Outside of eBay I'm finding nothing, and it's not exactly an easy term to search (hat minis brings up the wrong thing of course) Model kit shops https://www.hannants.co.uk/search/i...25¤cy_id=
|
# ? Sep 4, 2022 16:53 |
|
Ah, that's a good shout. I was looking around at miniatures when I should have been looking for hobby/models. Ah ha, found the motherlode stateside https://www.megahobby.com/brands/Hat.html edit-- holy CRAP these are cheap... I could do a whole 1/72 army for a fraction of what 28mm would cost. Count Thrashula fucked around with this message at 17:47 on Sep 4, 2022 |
# ? Sep 4, 2022 17:35 |
|
Count Thrashula posted:Ah, that's a good shout. I was looking around at miniatures when I should have been looking for hobby/models. Yeah hat don’t really compare in detail to the top notch kits but they are dirt cheap an paint up decently imho
|
# ? Sep 4, 2022 17:50 |
|
20mm is in that weird space where they are small enough that the detail tends to be shallow and the plastics are truescale rather than heroic so you end up not being able to paint them too fancily. It means that you tend to fall back on block colours and a black wash to sort it out and they get banged out quickly.
|
# ? Sep 4, 2022 18:14 |
|
lilljonas posted:I love 28mm nappy and I have hundreds of painted Frenchies, but I readily admit that the scale has a lot of cons. Only do 28mm imho if you like painting and you like the nittygritty details. Storage, paint speed, transportation, board size, all those speak for smaller scales. That's kind of where I'm stuck right now. 28mm has an excellent selection of beautiful and cheap (thanks to plastic) miniatures, but you end up with insane frontages for larger games and they don't look quite right for portraying large formations - especially if you base them individually and use sabot bases like you would for SP. I've been thinking about trying to adress that issue by using smaller round bases and getting/making custom sabot bases with the shortest possible distance between files and a bit more space between the front and rear rank, but that would take some experimenting. 10mm on the other hand looks great for larger formations but I'd almost certainly be stuck ordering from the UK and I agree regarding 15mm, I looked into that initially and quickly got the impression that it is a bit of a legacy scale insofar as it doesn't give you the same sense of scale as 10mm does, while at the same time not really offering much additional detail. 6mm starts turning kind of blobby for me, but 10mm seems to retain most of the detail 15mm has. Is Warlord planning on expanding the epic scale? Right now it only seems to support the 100 days, which I'm not terribly interested in. Arquinsiel posted:HaT are my favourite of the lot. They're nice sturdy plastic for the scale and they've got all the benefits of being cheap, covering all the bases, and being reasonably easy to get. It's worth buying a box of Voltigeurs or something just to see how you like them. I might just do that. Do they hold paint okay? That's probably what I'm most worried about.
|
# ? Sep 5, 2022 08:04 |
|
SRF posted:I might just do that. Do they hold paint okay? That's probably what I'm most worried about.
|
# ? Sep 5, 2022 13:34 |
|
I never had any issue, just use a good primer and it should paint like any other miniature. They certainly worked better than the bad old days of whatever Reaper was using for their Bones models or god forbid, Mantic's "restic."
|
# ? Sep 5, 2022 15:04 |
|
Arquinsiel posted:They tend to be a little bendy, so some people recommend giving them a PVA glue wash before you start painting them. I haven't found that to be particularly effective myself though, and it obscures a lot more detail at that scale. The 28mm/1:56 stuff I’ve bought from Hat was not of the bendy plastic you often see in 1/72 minis but rather a hard plastic that keeps the paint just like any other brand.
|
# ? Sep 5, 2022 15:16 |
|
lilljonas posted:The 28mm/1:56 stuff I’ve bought from Hat was not of the bendy plastic you often see in 1/72 minis but rather a hard plastic that keeps the paint just like any other brand.
|
# ? Sep 5, 2022 17:50 |
|
So I couldn't decide if my Panzer III N from the 1942 Eastern Front should be in the grey scheme or in the green-brown tropical scheme that a lot of tanks were painted in for whatever reason (I've seen a lot of photos of them in that scheme on the Eastern Front, but never a good explanation beyond nerd theorising on the internet with no actual sources), so I decided to just paint a two-tone scheme of both: e: I should note that this is before the swap to the dark yellow with green and brown camo patterns that happened in early 43.
|
# ? Sep 7, 2022 08:36 |
|
Endman posted:So I couldn't decide if my Panzer III N from the 1942 Eastern Front should be in the grey scheme or in the green-brown tropical scheme that a lot of tanks were painted in for whatever reason (I've seen a lot of photos of them in that scheme on the Eastern Front, but never a good explanation beyond nerd theorising on the internet with no actual sources), so I decided to just paint a two-tone scheme of both: Nice paint job! as for the camo scheme, afaik the German tanks with a desert brown base on the eastern front were tanks that were initially meant to be sent to North Africa, but were re-routed to the eastern front. But again, not sure to what degree that there are solid sources for that, given that most pics from the eastern front are black-and-white which makes identification of camo schemes notoriously hard to do.
|
# ? Sep 7, 2022 12:16 |
|
IIRC that's where the early-war brown on grey camo schemes went for several decades, before someone decided that they totally existed all along. Just no real way to see them in black and white photos, with both colours being about the same on that filmstock.
|
# ? Sep 7, 2022 12:20 |
|
lilljonas posted:I love 28mm nappy and I have hundreds of painted Frenchies, but I readily admit that the scale has a lot of cons. Only do 28mm imho if you like painting and you like the nittygritty details. Storage, paint speed, transportation, board size, all those speak for smaller scales. I agree with everything in this post. I love my 28mm Russians. Are you (the op) planning on painting two armies? If not - if you're going to play against someone who already has Napoleonics - what scale are they using? SRF posted:That's kind of where I'm stuck right now. 28mm has an excellent selection of beautiful and cheap (thanks to plastic) miniatures, but you end up with insane frontages for larger games and they don't look quite right for portraying large formations - especially if you base them individually and use sabot bases like you would for SP. I've been thinking about trying to adress that issue by using smaller round bases and getting/making custom sabot bases with the shortest possible distance between files and a bit more space between the front and rear rank, but that would take some experimenting. I put all of my infantry on 28mm magnetic squares (they're quite cheap, shogunminiatures.com) and then use 60mm x 40mm steel strips (wargameaccessories.com) to move them in groups.
|
# ? Sep 7, 2022 15:06 |
|
Arquinsiel posted:They tend to be a little bendy, so some people recommend giving them a PVA glue wash before you start painting them. I haven't found that to be particularly effective myself though, and it obscures a lot more detail at that scale. what do you use for primer then?
|
# ? Sep 7, 2022 18:35 |
|
regarding my previous requests for 6 mm ww2 man stls - think i'm just gonna go with trusty ol' baccus and print all the vehicles and guns (of which the models are plentiful). i am very surprised to not be able to find much in the way of building stls though, at smaller scales at least. anyone got a lead on some stuff i can print at 6 mm? up to 15 or maybe 20 mm stuff i'd say should scale down fine. looking for generic french country/city buildings
|
# ? Sep 7, 2022 19:15 |
|
ChubbyChecker posted:what do you use for primer then?
|
# ? Sep 7, 2022 20:22 |
|
Arquinsiel posted:I use whatever rattlecan I have handy in an appropriate colour, but the PVA advocates paint directly onto it. my army painter and citadel sprays flake right off from hat miniatures, i've found that only the pva method works for them
|
# ? Sep 7, 2022 20:32 |
|
hot cocoa on the couch posted:regarding my previous requests for 6 mm ww2 man stls - think i'm just gonna go with trusty ol' baccus and print all the vehicles and guns (of which the models are plentiful). i am very surprised to not be able to find much in the way of building stls though, at smaller scales at least. anyone got a lead on some stuff i can print at 6 mm? up to 15 or maybe 20 mm stuff i'd say should scale down fine. looking for generic french country/city buildings This is probably the best choice. For vehicles, check out m_bergman (pbuh), and for buildings, I've heard good stuff about wow buildings but there are also a lot of quality free files out there.
|
# ? Sep 7, 2022 21:58 |
|
lilljonas posted:Nice paint job! as for the camo scheme, afaik the German tanks with a desert brown base on the eastern front were tanks that were initially meant to be sent to North Africa, but were re-routed to the eastern front. But again, not sure to what degree that there are solid sources for that, given that most pics from the eastern front are black-and-white which makes identification of camo schemes notoriously hard to do. Thanks for the compliment! I’ve heard that theory too, and it’s a good one, but apparently nobody bothered to write that decision down, or if they did we’ve just lost the documentary evidence. So maybe we’ll never know. There is some evidence of German crews smearing mud on their grey tanks to make an ad hoc camouflage scheme in the field, so I can just pretend this paint scheme represents that if anyone cares, e.g:
|
# ? Sep 7, 2022 22:30 |
|
moths posted:This is probably the best choice. For vehicles, check out m_bergman (pbuh), and for buildings, I've heard good stuff about wow buildings but there are also a lot of quality free files out there. WOW is good quality, but scaling to exactly 6mm leaves the walls just a little too thin. I haven't tried them at a slightly large size yet. They look great in 15mm though. I'm working with the Kelly's Heroes set from Kickstarter.
|
# ? Sep 7, 2022 23:18 |
|
ChubbyChecker posted:my army painter and citadel sprays flake right off from hat miniatures, i've found that only the pva method works for them
|
# ? Sep 8, 2022 10:03 |
|
Arquinsiel posted:Which ones are you painting? They use different plastic for some of their miniatures for some reason. I have a bunch of WWII British that are basically like eraser rubber that's gone hard. The Napoleonics stuff is much sturdier. napoleonics. and i washed them properly too, so it wasn't that.
|
# ? Sep 8, 2022 11:31 |
|
ChubbyChecker posted:napoleonics. and i washed them properly too, so it wasn't that.
|
# ? Sep 8, 2022 12:09 |
|
Arquinsiel posted:I dunno what to say then man. I never had a problem with the couple of boxes I half-painted before getting side-tracked into a different abandoned period. If the PVA method works for you though keep doing it. As long as you're happy with the outcome that's all that matters. maybe it was some different plastic mix? eh, who knows
|
# ? Sep 8, 2022 12:11 |
|
Cessna posted:Are you (the op) planning on painting two armies? If not - if you're going to play against someone who already has Napoleonics - what scale are they using? Pretty much. No one I know is into Napoleonics so pre-existing armies are not a factor.
|
# ? Sep 8, 2022 12:56 |
|
If you want maximum cost effectiveness Italeri does starter sets, with terrain! https://www.italeri.com/en/product/2958
|
# ? Sep 8, 2022 15:29 |
|
Airfix do that set too. Might even be the same figures with how companies share moulds. I regret not grabbing it when I saw it, just to have the option of doing it someday. ETA: wow, the MDF really pushes up the price of it. The Airfix set goes for about £20 now and has like 300 figures in it. They're 1970s moulds and a bit crappy, but still. Arquinsiel fucked around with this message at 16:29 on Sep 8, 2022 |
# ? Sep 8, 2022 16:26 |
|
mllaneza posted:WOW is good quality, but scaling to exactly 6mm leaves the walls just a little too thin. I haven't tried them at a slightly large size yet. They look great in 15mm though. I'm working with the Kelly's Heroes set from Kickstarter. yeah and 5 pounds for every stl is a bit steep for all that detail i don't really need at 6 mm. i'll continue searching, thanks (bergman is the goat for vehicles tho, agreed)
|
# ? Sep 8, 2022 16:30 |
|
Anyone have any favorite sources for tabletop roads/rivers if I don't feel like making them myself? I figure if anyone would know it'd be the historical folks. I've seen some cool fabric/neoprene ones on Facebook but I'm not sure how cheap/awful that would look on the table.
|
# ? Sep 10, 2022 15:10 |
|
Count Thrashula posted:Anyone have any favorite sources for tabletop roads/rivers if I don't feel like making them myself? I figure if anyone would know it'd be the historical folks. The fabric ones can work- and are cheap to make yourself - just go buy some fabric and cut it. Personally, I've always liked the look of rubber ones, but they are the most expensive. Though the idea of playing historical and worrying about such a petty thing as "expense" seems a contradiction.
|
# ? Sep 11, 2022 00:05 |
|
|
# ? Jun 5, 2024 07:44 |
|
Does anyone know of good sources of modern Eastern European minis in 15mm? Perhaps a bit tacky, but all the insane combat in Ukraine has made me think about the possibility of slowly working on some armies at that scale that could be used for wargaming in the future.
|
# ? Sep 11, 2022 08:38 |