|
Nice! I've considered getting an Extreme 5320 for home use, but those are hardly free
|
# ? Mar 28, 2023 21:44 |
|
|
# ? Jun 8, 2024 01:10 |
|
OK my current router seems to be dying, and I'm moving to a new place soon, so I need help finding a new router. My connection at my new place is going to be 300down/30up (canada ), in an apartment. I'm going to have 3-5 wired devices, and a handful of wireless where the speed doesn't really matter much. I assume pretty much any random wifi router and a cheap switch can handle that nowadays? So even just a simple "this brand good, this brand sucks" would be helpful. Where I am all of the locally available 'under $300' stuff seems to be a mix of ASUS, D-Link, and TP-Link. Edit: an aside: I decided to try to look up OpenWRT supported routers, but it seems that not a single one sold nearby is on their supported devices list? IDK if I was Doing It Wrong or if canada has different model numbers or what. BadMedic fucked around with this message at 13:05 on Mar 30, 2023 |
# ? Mar 30, 2023 13:02 |
|
What's everyone with stupid fast home fiber doing hardware-wise these days? I've been using pfSense for years on a Netgate SG2440 which is fine for up to gigabit speeds, but now I've moved to a neighborhood which has AT&T's 2/2 and 5/5 service available. I got the 2/2 for now and probably won't upgrade any time soon, but for the sake of futureproofing I'd really like to build something that could at least handle a full 5/5 if I ever do choose to make the jump. Unfortunately that knocks out all of the cheap quad 2.5G Atom boxes that are everywhere on the internet. I have a strong preference for x86 hardware just due to the number of choices on the software side, but I'm open to anything if it makes sense. Is there any appliance-style hardware in this range worth looking at, or should I just pick up a few NICs and find some compact PC hardware to stick it in? Or maybe just stick it in my server and virtualize the whole thing?
|
# ? Mar 31, 2023 00:38 |
|
I let AT&T's router do NAT, then use a Mikrotik router/switch (CRS326-24G-2S+IN) to give me more ports. If I had the option to ditch AT&T's router entirely I would do that and probably just let the Mikrotik box do NAT as well, but since it's required to authenticate the connection and will be drawing power anyway I might as well make it work.
|
# ? Mar 31, 2023 01:33 |
|
wolrah posted:What's everyone with stupid fast home fiber doing hardware-wise these days? You could get quad port 10gbe card and shove that in a SFF whatever that has a pcie slot
|
# ? Mar 31, 2023 02:41 |
|
This thing exists: https://www.servethehome.com/the-gowin-r86s-revolution-low-power-2-5gbe-and-10gbe-intel-nvidia/
|
# ? Mar 31, 2023 02:53 |
|
SamDabbers posted:This thing exists:
|
# ? Mar 31, 2023 03:02 |
|
Why is my unifi poo poo suddenly refusing to reliably hand out DHCP leases? New device connects, shows up in the console, but with a self-assigned IP. Reboot the AP, WHOOPS, sorry here's IPs everyone! Everything's fully updated, but with Ubiquiti, that's probably my problem.
|
# ? Mar 31, 2023 03:08 |
|
ubiquiti does everything but firewalls pretty well ime, I vastly prefer a home rolled pf/opn sense to ubiquiti’s offerings
|
# ? Mar 31, 2023 03:18 |
|
I still keep thinkin bout gettin a UDM SE even though it’s silly overkill. I just am a sucker for the slick interfaces
|
# ? Mar 31, 2023 03:19 |
|
same and then I dive into unifi firewall reviews and go nah
|
# ? Mar 31, 2023 03:33 |
|
priznat posted:I still keep thinkin bout gettin a UDM SE even though it’s silly overkill. I just am a sucker for the slick interfaces I will probably get one eventually and justify it by running some of their cameras.
|
# ? Mar 31, 2023 03:43 |
|
cloud key gen2+ is cheaper for cameras if you’re going that route
|
# ? Mar 31, 2023 04:09 |
|
e.pilot posted:same and then I dive into unifi firewall reviews and go nah Who has a good review? I have done some lazy googling but nothing has come up other than some youtubers that are clearly fully in the ubiquiti ecosystem.
|
# ? Mar 31, 2023 04:20 |
|
e.pilot posted:cloud key gen2+ is cheaper for cameras if you’re going that route I waffle, but I don't have any PoE or unifi switches so that's my baloney excuse to buy more expensive stuff.
|
# ? Mar 31, 2023 04:39 |
|
If you are seriously looking at spending 200+ for a stand alone router for home use just go with a pfsense/opensense build. I’d run BlueIris or a Synology for cameras way before I’d ever consider Unifi Protect.
|
# ? Mar 31, 2023 12:17 |
Cyks posted:If you are seriously looking at spending 200+ for a stand alone router for home use just go with a pfsense/opensense build. Yeah i bought a lil celeron powered HP S01 refurbed for like $140 and an intel quad NIC and set up OPNsense and called it a day
|
|
# ? Mar 31, 2023 12:30 |
|
My ubiquiti setup was massively improved by upgrading to a UDM Pro. To be fair I was coming from a USGv3 which seemed to be pretty terrible to me, but the UDM Pro has been rock solid with multiple vlans and SSIDs. I'm sure my network isn't particularly complicated compared to what others may have, especially if you are looking for fine grained control of IPtables type rules etc, but it's been great for me.
|
# ? Mar 31, 2023 12:32 |
wolrah posted:What's everyone with stupid fast home fiber doing hardware-wise these days?
|
|
# ? Mar 31, 2023 12:33 |
|
Eletriarnation posted:I let AT&T's router do NAT, then use a Mikrotik router/switch (CRS326-24G-2S+IN) to give me more ports. If I had the option to ditch AT&T's router entirely I would do that and probably just let the Mikrotik box do NAT as well, but since it's required to authenticate the connection and will be drawing power anyway I might as well make it work. There's a Discord about it: https://discord.gg/EVbeZY5vq7 Here's the main details on the AT&T bypass. https://docs.google.com/document/d/13gucfDOf8X9ptkj5BOg12V0xcqqDZDnvROJpW5CIpJ4/edit?pli=1#heading=h.l4gd8awu81qf It requires a specific device from AT&T, a specific ONT, and support for some unusual VLAN configurations on the WAN port to make it work but people have them linked up to all the major open source router platforms plus Unifi successfully. That's actually one of the reasons I got the 2/2 to start instead of just going with 1/1 and using the equipment I have for now, lower tiers of service might not get the right device from AT&T. e.pilot posted:You could get quad port 10gbe card and shove that in a SFF whatever that has a pcie slot I have a pair of ConnectX3 dual port 40G cards around so slapping a pair of QSFP>SFP converters in one to use it as a 10G device is definitely on the table, though I would prefer something that can support multigig modes just in case the bypass stops working some day and I'm stuck falling back to having the ISP box in front. Intel X710-T4L looks perfect for my wants but isn't cheap.
|
# ? Mar 31, 2023 17:02 |
|
Cyks posted:If you are seriously looking at spending 200+ for a stand alone router for home use just go with a pfsense/opensense build. I've run all this before. PfSense, m0n0wall, etc, to good effect. I even sold a stack of repurposed old IBM terminals on here for people to use. I just kinda like the unifi structure and management, tbh. I have a USG and some APs now, performance is fantastic. I consider switching to something else for routing and keeping the APs, but then I have to figure out and run an entirely separate setup for cameras. All the camera software seems like absolute horrible dogshit.
|
# ? Mar 31, 2023 18:40 |
|
I'm still rocking an EdgeRouter 4 which has been super reliable.. I figure if I ever want a firewall better than UniFi's, I'd just pick up a Firewalla Purple SE, slap that in front of the ER-4 and be done with it. Geez, I just got an alert that the UISP EdgeRouter 12 (a rebranded EdgeMax EdgeRouter 12P) just came back in stock.
|
# ? Mar 31, 2023 19:32 |
|
That Works posted:Yeah i bought a lil celeron powered HP S01 refurbed for like $140 and an intel quad NIC and set up OPNsense and called it a day Reminds me of the heady days of m0n0wall.
|
# ? Mar 31, 2023 23:59 |
Beef Of Ages posted:Reminds me of the heady days of m0n0wall. I’m not familiar. What’s that one?
|
|
# ? Apr 1, 2023 00:47 |
That Works posted:I’m not familiar. What’s that one? It was quite popular on Soekris hardware. EDIT: The way it saved its configuration to a separate filesystem in /cfg was also quite revolutionary for its time, and is the reason why things like NanoBSD and TrueNAS is partitioned the way it is, to this day. BlankSystemDaemon fucked around with this message at 01:19 on Apr 1, 2023 |
|
# ? Apr 1, 2023 01:15 |
|
That Works posted:I’m not familiar. What’s that one? BlankSystemDaemon posted:It was the original FreeBSD based firewall appliance, but it used ipfilter by Darren Reed instead of ipfw or pf. Yup. You can catch up on (ancient) history at m0n0.ch/wall but it was great before OPNsense was a thing. I had an old Dell optiplex box that had passive cooling in the Celeron CPU plus an SD card so the thing was fully solid state. Revolutionary for 2002; good times were had by all.
|
# ? Apr 1, 2023 04:49 |
|
SamDabbers posted:This thing exists: what on earth someone's been getting into Asrock's
|
# ? Apr 1, 2023 05:29 |
|
withoutclass posted:My ubiquiti setup was massively improved by upgrading to a UDM Pro. To be fair I was coming from a USGv3 which seemed to be pretty terrible to me, but the UDM Pro has been rock solid with multiple vlans and SSIDs. I'm sure my network isn't particularly complicated compared to what others may have, especially if you are looking for fine grained control of IPtables type rules etc, but it's been great for me. Dont get me wrong, I’m not saying the UDM Pro is a terrible device, but for anyone who is looking for a stand alone router who just wants something easy to configure with VLANs, a gig of throughout and some ACLs can save $300 and get an edge router X, or TP-Link r605.
|
# ? Apr 1, 2023 13:23 |
|
a dual/quad port x86 SBC from aliexpress for $150 + opnsense is the move imo, unless you’ve got hardware laying around or some sort of unique need
|
# ? Apr 1, 2023 14:18 |
|
For the aliexpress router is the n5105 still the best bang/buck cpu at this point? I will be going to 1.5Gb+ fibre at some point so need the 2.5 wan ports.
|
# ? Apr 1, 2023 15:56 |
|
priznat posted:For the aliexpress router is the n5105 still the best bang/buck cpu at this point? pretty much, you could probably get away with a j4125 but the price difference is so minimal why bother
|
# ? Apr 1, 2023 18:56 |
|
Is there a good beginners guide to setting up something like pfsense or opnsense with common features that folks have used? I kind of want to get one of those boxes and replace my aging USG.
|
# ? Apr 2, 2023 18:54 |
|
KKKLIP ART posted:Is there a good beginners guide to setting up something like pfsense or opnsense with common features that folks have used? I kind of want to get one of those boxes and replace my aging USG. https://www.youtube.com/@LAWRENCESYSTEMS Lawrence Systems has some great tutorial videos that walk you through setting up pfSense. I'd start there.
|
# ? Apr 2, 2023 19:11 |
|
Lawrence Systems on YouTube has really good “getting started” videos for a bunch of pfsense features if you like video guides.
|
# ? Apr 2, 2023 19:17 |
|
Awesome. I just have to think which of the systems I want but that dual 2.5GBe one posted earlier seems solid.
|
# ? Apr 2, 2023 20:09 |
|
This is more small office rather than home office but I just installed two 40f fortigates with UTM subscriptions in the first of 50 locations and while it went perfectly fine, while setting them up I was struggling to determine what value we are actually getting out of it. I went with fortigates because that’s what we have at our main branch, but I’m half tempted to install netgates instead. I’m not using FortiManager/forticloud/etc and switches/APs are Aruba Instant On so I’m not even getting a single pane of glass.
|
# ? Apr 2, 2023 21:11 |
|
I've read through the OP but was looking to see if there was a specific recommendation for this use case: Me and some buddies will be splitting a Starlink setup for a few months and I'm looking for a solution that will let me be a mini-ISP. Basically I'd like to either do throttling per MAC address or a username and password without buying a whole commercial suite. Either percent of available connection or speed per user. Is there a 'roll my own ISP' hardware/software solution? I've previously split a metered satellite connection and 'someone' always used up all the bandwidth before the end of the month so I'd like to work something out ahead of time. Any recommendations would be appreciated!
|
# ? Apr 3, 2023 20:31 |
|
throttling via opnsense is trivial, lots of tutorials out there
|
# ? Apr 3, 2023 21:36 |
|
Per this thread I went with an n5105 (quad 2.5gbps) from AliExpress and opnsense and have been very happy with it. I actually got a bit of a speed bump as well based on Usenet performance which is about the only thing that can consistently saturate my gig fiber.
|
# ? Apr 3, 2023 21:47 |
|
|
# ? Jun 8, 2024 01:10 |
|
e.pilot posted:throttling via opnsense is trivial, lots of tutorials out there Thanks! I've heard of pfSense but not this before. Appreciate it.
|
# ? Apr 4, 2023 16:51 |