|
widefault posted:From Friday, a second Hondo H-1111, Made in Japan copy of a G&L F-100. https://newyork.craigslist.org/brk/msg/d/brooklyn-les-paul-copy-hondo-ii/7606166479.html https://newyork.craigslist.org/brk/msg/d/brooklyn-vintage-hondo-ii-les-paul-with/7603015049.html https://newyork.craigslist.org/jsy/msg/d/brooklyn-hondo-h1-deathdagger/7594282721.html
|
# ? Apr 19, 2023 12:46 |
|
|
# ? Jun 4, 2024 00:03 |
|
I got some covers made up for my bass amp and our subs. Subs: Bass Amp - (Fender Rumble 350). I got them from Coveramp, for 75 bucks each I couldn't be happier. It was raining a bit the last time we had a show, and I load everything into my pickup which doesn't have a top to it. I wasn't thrilled about just having a tarp, so the waterproof covers are pretty key. AFewBricksShy fucked around with this message at 14:42 on Apr 19, 2023 |
# ? Apr 19, 2023 14:39 |
|
The Leck posted:I've seen a few old Hondos pop up on craigslist, and I have no idea if the prices are good, but they always stand out to me due to your posts. Right now, there are a couple of those DiMarzio-equipped LPs and... something else. Better pricing than Reverb, but too much for my cheap rear end. For a set neck with DiMarzios I'd go ~$300-350. Wouldn't go over ~$250 for a bolt-neck. This latest one was less than that with shipping. Some day I'll buy a Death Dagger, then get a bucket of sand to act as a stand. Done playing? Stick it into the bucket.
|
# ? Apr 19, 2023 17:21 |
|
The Leck posted:I've seen a few old Hondos pop up on craigslist, and I have no idea if the prices are good, but they always stand out to me due to your posts. Right now, there are a couple of those DiMarzio-equipped LPs and... something else.
|
# ? Apr 20, 2023 01:09 |
|
Justified by a work promotion
|
# ? Apr 21, 2023 14:49 |
|
I've really wanted to try those. I'm curious if they still have the tele spank ... I can't see why they wouldn't.
|
# ? Apr 21, 2023 18:43 |
|
Verman posted:I've really wanted to try those. I'm curious if they still have the tele spank ... I can't see why they wouldn't. I have one in clear brown, and yeah, it's a Tele in all but shape. So unless you mean the way you can literally spank someone with a telecaster, yeah, it's got the stuff. It's a hecking cool guitar, in yellow too!
|
# ? Apr 21, 2023 18:49 |
|
Captain Splendid posted:Justified by a work promotion sweet strat
|
# ? Apr 21, 2023 19:22 |
|
Followed me home from the pawnshop for $100 Brownsville "Thug", chambered body, Ric/DeArmond knock-off pickups, made in Korea. Pretty nice for $100, lovin the metal flake Also a terrible painting for the wall of music-related "art"
|
# ? Apr 22, 2023 04:12 |
|
Grabbed this a little while back after getting a new job with a bump in pay. I'm a long time guitarist, first time bassist, and this is probably the nicest instrument I own. It sounds great! Also a new Avatar.
|
# ? Apr 24, 2023 23:08 |
|
NuclearPotato posted:I broke down; my Moog semi-modular collection is now complete (until I decide I want a Mavis for some reason): Nice, congrats, I feel pangs of envy! I told my spouse that owning one of these would deal a powerful blow to the patriarchy but so far they are insisting I use my own money for this and not house bucks edit: do you have the whole dfam/m32/sub trifecta? I have mavis and m32, I enjoy them, though I wish maybe that I just had $800 towards a Matriarch e: the best reason to own a mavis is as a mother32 sidecar to wavebend it Cabbages and VHS fucked around with this message at 23:18 on Apr 24, 2023 |
# ? Apr 24, 2023 23:15 |
|
Howling Bells posted:Grabbed this a little while back after getting a new job with a bump in pay. I'm a long time guitarist, first time bassist, and this is probably the nicest instrument I own. It sounds great! Stingrays are absolutely awesome. They have a punch to them no other bass has. Hell yeah.
|
# ? Apr 25, 2023 18:59 |
|
New (to me) guitar. Charvel Pro-mod DK22 It's kind of ridiculous. Compound radius fretboard. Sculpted neck-joint. Super light weight. It's like custom-shop features for the price of the cheapest American-made Fender.
|
# ? Apr 26, 2023 09:29 |
|
No pic because a screenshot of a plugin isn’t very exciting but Neural is doing a half off sale on most of their plugins so I finally bought the Tone King Imperial one. It’s really good!
|
# ? Apr 28, 2023 05:59 |
|
Well this thing just 2017 Fender standard jazz bass, along with a Fender rumble 15 amp. $200. Its dirty and needs new strings but its in great shape otherwise. Barely played. Frets are in great condition and the pots are smooth. I don't even really play bass but I couldn't say no for the price, but I have been wanting to have one around to gently caress around on. I might be going to look at a lake placid blue jazz bass and a hot rod deluxe v3 this weekend because again ... the deals are too good. I think I'm having a mid life crisis. I just bought two Fenders in the last 2 weeks.
|
# ? May 3, 2023 00:20 |
|
Wow. You can’t-not buy it at that price. Beauty score.
|
# ? May 3, 2023 00:40 |
|
That's as good as scores get. Congrats.
|
# ? May 3, 2023 05:06 |
|
I will have to show my wife these comments because she was not impressed. Honestly between this and my fender standard strat that I picked up 2 weeks ago with a vox practice amp for $250 ... I'm feeling pretty lucky right now. I'm hoping this hot rod pans out.
|
# ? May 3, 2023 06:14 |
|
Verman posted:I'm hoping this hot rod pans out. Not really new gear, but I got the basement pile tidied up a bit. That Gorija Charvel is definitely a favourite guitar.
|
# ? May 3, 2023 10:07 |
|
Sockington posted:
I love everything about this especially the Traynors.
|
# ? May 3, 2023 22:19 |
|
Sockington posted:
|
# ? May 3, 2023 22:31 |
|
Sockington posted:
What an awesome setup! Even your lighting is good.
|
# ? May 5, 2023 07:56 |
|
Cabbages and Kings posted:Nice, congrats, I feel pangs of envy! I do! Love the heck outta them; I posted them earlier in this thread when I got them set up: NuclearPotato posted:My Moog obsession continues unabated:
|
# ? May 5, 2023 14:42 |
|
The Leck posted:That Bronco is just so cool. It looks totally professional and really unique - sitting between a full sized bass and a tele, it's almost like an optical illusion. It had to go under the knife today. I was bringing it down to A standard because A# still felt like too much tension. In the process, the 0.014 string snapped up at the tuner. Decided I only liked having two volumes as the tone pot was useless at this tuning. I don’t know where I put the gold-topped knobs from before, so slapped a pare of spare Strat “tone” knobs on there for now. Consider it an homage to the original EVH MusicMan single “tone” pot guitars until I get bothered enough to replace them. So much easier to dial in the sound I want now. Middle pickup for girth, bridge for bite, and find the balance between.
|
# ? May 7, 2023 01:41 |
|
Not exactly a purchase, but I just got a new job in sales at a very large music gear retailer. I haven't started working the floor yet, just finished level 1 training at their headquarters. But one part of the training/indoctrination course was visiting the factory floor of their sister company, Yorkville Sound. It's very cool to see a PA company that is, from the ground up, a Canadian operation. No 'assembled in CAN (from parts made in Taiwan)', virtually everything Yorkville manufactures is done in-house. I got some pics.
|
# ? May 7, 2023 05:51 |
|
so cool, thanks for sharing these. Love the White Falcon with the Traynors.
|
# ? May 7, 2023 05:59 |
|
Those Traynor amps were the exact ones that Lee and Lifeson used for the 'vintage' part of the R40 tour, apparently. The other Traynor belonged to a guitarist who got hired by Prince, I can't recall their name though. Of course I had to play the RUSH pinball table. The coolest part of the tour was that torture test chamber you can see the subwoofer in in the third- or fourth-last pic. They torture test new prototypes for _seventeen straight days_ at full program volume, and that thing that looks like a mic on the cone is actually a laser - it's there to measure driver excursion so they can pinpoint exactly how and when the speaker fails. The room is floating, two layers of cinderblock walls with sand poured in between them. It's obviously not fully soundproof but it's remarkable how quiet it is when you compare it with the door open. They said they built the room after they left a dual 21" sub to test on the floor over a weekend, and by Saturday morning they'd received >30 noise complaints from people across the highway whose foundations were shaking. Mister Speaker fucked around with this message at 06:08 on May 7, 2023 |
# ? May 7, 2023 06:05 |
|
Mister Speaker posted:Not exactly a purchase, but I just got a new job in sales at a very large music gear retailer. I haven't started working the floor yet, just finished level 1 training at their headquarters. But one part of the training/indoctrination course was visiting the factory floor of their sister company, Yorkville Sound. It's very cool to see a PA company that is, from the ground up, a Canadian operation. No 'assembled in CAN (from parts made in Taiwan)', virtually everything Yorkville manufactures is done in-house. I got some pics. These are awesome thanks for the pictures
|
# ? May 7, 2023 06:06 |
|
Mister Speaker posted:Those Traynor amps were the exact ones that Lee and Lifeson used for the 'vintage' part of the R40 tour, apparently. The other Traynor belonged to a guitarist who got hired by Prince, I can't recall their name though. Of course I had to play the RUSH pinball table. If you scroll up, I’ve got a bit of a Traynor museum of myself - including the rare keyboard version of the TS series. I assume you’ve read the Yorkville company history pdf that’s a few years old (up till 1991 covered) https://medias.audiofanzine.com/files/yorkvillehistory-471231.pdf That’s cool we have a man on the inside. Tell them they need to release the TS preamp in a pedal format because that’s an untapped market. There’s companies using their circuit and Yorkville is like “cool thanks” (rusty box).
|
# ? May 7, 2023 06:21 |
|
Sockington posted:If you scroll up, I’ve got a bit of a Traynor museum of myself - including the rare keyboard version of the TS series. I saw your post, actually it was someone else mentioning your Traynor amps that reminded me to make that photo dump from the factory. Yep, the Yorkville/Traynor/Long&McQuade History was one of the first things we went over in the course, and yeah I also didn't know until a couple of years ago that they're all basically the same company. Really beautiful stuff, I mean just about as heartwarming as a story of a corporation can be. And you can still tell (on just about every level, from the training staff to the guys who gave us the Yorkville tour and joked around with their coworkers at each stop) that it's very much a labour of love by musicians and music lovers. Plus, I'm actually working at a job with health benefits now, as well as some fuckin' clutch perks like dirt-cheap rentals and financing, and encouraged equipment loans. It's a daunting shift from the Wild West Hospitality Industry, but I'm stoked to have made it because it feels like a place to grow.
|
# ? May 7, 2023 09:56 |
|
Bought a 70s Burny/Fernandes Les Paul. I really liked how it looked and it has a brass nut (and toggle switch!) and stuff. I told the dude to take the EMGs out and charge me less and he did since I'll just put something else in them that I much prefer. Bummer, though, I probably would've loved the original PAF clones.
|
# ? May 9, 2023 21:55 |
|
No joke I thought that said "Horny"
|
# ? May 10, 2023 00:28 |
|
Lol. You often see "Bunny" LPs listed on Japan Yahoo auctions.
|
# ? May 10, 2023 00:48 |
|
Those are objectively better options.
|
# ? May 10, 2023 02:34 |
|
Doing a ~1500 dollar eurorack renovation from this: to this: I've bought like 40% of the modules already, this feels like crack
|
# ? May 10, 2023 02:46 |
|
No 1U row? *ducks under table vvvv the volca modulars are fun B33rChiller fucked around with this message at 04:03 on May 10, 2023 |
# ? May 10, 2023 02:57 |
|
God help me and my near-nonexistent savings the day my brain says “welp, time to dive into modular!”
|
# ? May 10, 2023 03:48 |
|
Just one semi-modular, they say. I can get a semi-modular and scratch that itch to plug cables into other things, they say. Next thing you know, you’re buying a $600 CS-80 repro filter and are pondering where you went wrong in life…
|
# ? May 10, 2023 04:24 |
|
I pray to God I never find out what any of that stuff is, because it looks rad as hell.
|
# ? May 10, 2023 04:37 |
|
|
# ? Jun 4, 2024 00:03 |
|
CatBlack posted:Doing a ~1500 dollar eurorack renovation from this: hope you’re buying extra skinny cables
|
# ? May 10, 2023 08:53 |