|
Saw the above by Andy Clark and wanted to do a slightly more stylized take on nighttime Headhunters: Now I just have to figure out how to base them to match the rest of my Martian based Alpha Legion.
|
# ? Jul 28, 2023 03:40 |
|
|
# ? May 12, 2024 09:20 |
|
Those look great, especially the eyes! I'm trying to get back to painting. Turns out you can finish projects instead of letting them linger for literal decades!
|
# ? Jul 28, 2023 05:25 |
|
I would love to hear some suggestions for colour scheme ideas for these space fleets: Udoxian K’shellik I was thinking fiery orange with navy accents on the udoxian, and light blue gradient to white on the other?
|
# ? Jul 28, 2023 07:21 |
|
Loden Taylor posted:
Those are sweet as heck. This thread is always inspiring. I am having trouble with fine detail work on my minis. Take the Ork in progress below. As you can see I plan to have his goggles black rimmed with orange eyes. Several of his Kommando friends have similar face mask situations I plan to do with black rim around orange. But with my detail brush I just can't get the black paint right where I want it, and then when I correct I can't get the orange paint only where I want it, and I'm a couple iterations of covering smudges into this and stopping before I glom on too much. Skill issue or should I try, like, using a toothpick or bent staple to apply the itty bits?
|
# ? Jul 28, 2023 17:16 |
|
What fine detail brush are you using?
|
# ? Jul 28, 2023 17:27 |
|
Skill issue and/or tool issue. Maybe your paintbrush sucks and doesn't have a sharp enough tip. Maybe your paint needs to be a bit thinner on the black to more easily flow so you're not having to press the brush as hard which ends up making the bristles spring onto the orange area. Maybe you've just got shakey hands and need to work on finding positions and angles that work for you.
|
# ? Jul 28, 2023 17:31 |
|
I'm betting the tip isn't sharp enough, or the black paint sucks. The latter can be fixed by mixing black ink into black paint
|
# ? Jul 28, 2023 17:41 |
|
how are the rims delineated on the model or is this detail you're adding? A thinned black that flows around a raised goggle rim or into a recessed rim would work if this is a detail present on the model.
|
# ? Jul 28, 2023 19:19 |
|
Finally tried some NMM and followed the Warcom guide on painting your own Titan insignia. Quite rough round the edges but I keep telling myself it'll look good from 3 feet. Now the hard part is working up the courage to paint the actual totem over the top of it.
|
# ? Jul 28, 2023 21:27 |
|
Z the IVth posted:Finally tried some NMM and followed the Warcom guide on painting your own Titan insignia. Looks great, especially as a first try. Now I need to do the same thing x3 and make a Nurgle machine with that.
|
# ? Jul 28, 2023 21:30 |
|
Z the IVth posted:Finally tried some NMM and followed the Warcom guide on painting your own Titan insignia. where's the ring
|
# ? Jul 28, 2023 21:40 |
|
Silhouette posted:where's the ring It's the gold thing in the middle of the picture
|
# ? Jul 28, 2023 21:50 |
|
Z the IVth posted:Finally tried some NMM and followed the Warcom guide on painting your own Titan insignia. You should be really happy with these. They certainly are a tad rough in spots, but it really comes together in the timg, which is a scale that more accurately represents seeing it on the table.
|
# ? Jul 28, 2023 22:24 |
|
Bit of a cheeky crosspost from the Miniature Wargaming thread but I really like how these figures have turned out on the table : nice and vibrant and readable from a distance:
|
# ? Jul 28, 2023 23:23 |
|
Wow, that looks amazing! I need to get some pics of my games, I don't think they'll look this nice though.
|
# ? Jul 28, 2023 23:54 |
|
I have an Army Painter "Hobby Brush: Small Detail." With a brown handle, from a three-brush starter set. I'll thin the paints more and accept that practice will have to make perfect on this. edit and it's Abaddon Black paint
|
# ? Jul 29, 2023 00:59 |
|
SuperKlaus posted:I have an Army Painter "Hobby Brush: Small Detail." With a brown handle, from a three-brush starter set. I'll thin the paints more and accept that practice will have to make perfect on this. If you're not, try painting the brush towards you, like a lower case letter L. Turn the model so that works for the part of the rim you're on.
|
# ? Jul 29, 2023 01:09 |
|
SuperKlaus posted:I have an Army Painter "Hobby Brush: Small Detail." With a brown handle, from a three-brush starter set. I'll thin the paints more and accept that practice will have to make perfect on this. I'm also personally a big fan of Vallejo Model Colour Black (70.950) as your base for this sort of stuff but that'll need a fair bit of thinning just like Abaddon Black does.
|
# ? Jul 29, 2023 02:03 |
|
Vallejo Model Air black straight from the bottle is king. Vallejo Premium Black is also super amazing but needs thinning. https://acrylicosvallejo.com/en/product/hobby/premium-rc-color/black-62020/ this stuff
|
# ? Jul 29, 2023 02:09 |
|
Lamuella posted:It's the gold thing in the middle of the picture the rare inverse goatse the estoag
|
# ? Jul 29, 2023 02:16 |
|
Got caught up on painting some more For those curious, here's the recipe I used for their power armor (E: forgot to add the shading wash step) 1. Prime black 2. Basecoat VGC Extra Opaque Heavy Blue (I believe this is going to be retired now the new VGC line has launched. Supposedly VMC Prussian Blue is an equivalent color; I ordered a bottle along with another bottle of the Heavy Blue so hopefully I'll be able to find out here before long) 3. Apply a dark blue wash for shading (I used Army Painter Blue Quickshade on some, and a 10:1 mix of Pledge Floor Care/Daler-Rowney indigo ink on others) 4. Drybrush Army Painter Gorgon Hide (I used a smaller drybrush for this; if you want to try for a smoother color transition, you could use a larger drybrush and drybrush an "intermediate" blue first, like AP's Electric Blue or something similar) 5. Clean up any splotches and overly drybrushed areas with the basecoat color, painting in such a way that you're basically "faking" the edge highlight on the armor 6. Apply a glaze of 4 parts Vallejo Glaze Medium to 1 part GW Talassar Blue Contrast paint all over. Let that dry and then apply a second glaze of the same mixture 7. Step back and marvel at how blue your rinse water has gotten Along with the power armor on these dudes, I also did the gold parts of their armor, painted the two heads of the non-helmeted guys and the "skull" parts of the Reiver troops, along with the "soft" ribbed armor parts (painted a medium grey and then washed with Pro Acryl Black Wash). Still got some more to do (weapons, purity seals, etc.), but so far I'm pretty pleased with how they're coming along. Sydney Bottocks fucked around with this message at 06:33 on Jul 29, 2023 |
# ? Jul 29, 2023 04:34 |
|
Virtual Russian posted:Wow, that looks amazing! I need to get some pics of my games, I don't think they'll look this nice though. That’s really kind, thank you. The one thousandth point game used almost all of a Miniatures I have cash and to expand further really requires many more troopers. I think I’m going to sit on my hands until I have a game against my brother before I do any more!
|
# ? Jul 29, 2023 08:08 |
|
Mercurius posted:I'm also personally a big fan of Vallejo Model Colour Black (70.950) as your base for this sort of stuff but that'll need a fair bit of thinning just like Abaddon Black does. This is a great flat black. Reaper Master Series black is also great and a little thinner.
|
# ? Jul 29, 2023 08:16 |
|
Silhouette posted:the rare inverse goatse A skullse now
|
# ? Jul 29, 2023 09:08 |
|
Z the IVth posted:A skullse now oh that's fantastic.
|
# ? Jul 29, 2023 09:20 |
|
Z the IVth posted:A skullse now Great work
|
# ? Jul 29, 2023 12:08 |
|
Z the IVth posted:A skullse now Hell yeah
|
# ? Jul 29, 2023 13:06 |
|
Just got in the Mordhiem with some friends. I've really enjoyed painting up these models but I've just knocked this guy after dealing with a sad sick kid. And that's the three I've painted so far. What a blast this has been! tehsid fucked around with this message at 14:36 on Jul 29, 2023 |
# ? Jul 29, 2023 13:09 |
|
airbrush painters, how are preparing your paints? i got a couple dropper bottles that i mix up what i need in, but i find that i cant really tell how well mixed it is until it goes through the air brush and so far ive had more misses than hits.
|
# ? Jul 29, 2023 16:40 |
|
I pretty much just mix in the airbrush now. To test how thin it is, just take a drop on a paint brush and let it run down the side of the paint pot. You'll get a good idea of what's right pretty quickly edit: transferring paint is yet another reason to keep a bunch of cheap-rear end brushes on your painting desk edit edit: Before Justin made them illegal, I had a bunch of plastic drinking straws I would pipette thinners with. Just cut them short Jonny Nox fucked around with this message at 16:58 on Jul 29, 2023 |
# ? Jul 29, 2023 16:53 |
|
Jonny Nox posted:I pretty much just mix in the brush now. I haven't used an airbrush in months, but one tip I read and always followed was to make sure you put the thinner in first before adding the paint, so that way unthinned paint isn't the first thing hitting your needle and nozzle when you go to mix it up.
|
# ? Jul 29, 2023 17:00 |
|
Oh, yeah. That's important.
|
# ? Jul 29, 2023 17:01 |
|
Jonny Nox posted:I pretty much just mix in the airbrush now. i tried mixing in the airbrush once or twice, but i felt like the majority of the paint just went down into the feed and i couldnt mix it properly, even with the help of a poo poo brush. i dont know if you have a decent artists store near you, but you can get little plastic pipettes for like 30 cents a piece. the same style ones that came in the covid test kits.
|
# ? Jul 29, 2023 18:21 |
|
I've seen a few people use those little dishlike metal mixing palettes so that the paint and thinner are properly mixed before it goes in the airbrush. Apparently this is a decent method for stopping the airbrush clogging.
|
# ? Jul 29, 2023 18:25 |
|
plastic shot glasses work pretty well for me. i was mixing in the cup with an old paint brush but for primer especially (at least vallejo primer anyway) i found that as the primer got older there'd be some chunks in the primer that I would want to filter out in the cup first.
|
# ? Jul 29, 2023 18:28 |
|
Bashed two kits together, thinking I might get into Horus Heresy. Turns out I'm such a slow painter I might be done by the time fourth edition rolls around.
|
# ? Jul 29, 2023 18:49 |
|
Is that a wolf helmet or a rat helmet? Love it either way.
|
# ? Jul 29, 2023 18:58 |
|
Your mind was like "Space Wolves exist, so why not Space Rats? Is that one of the Space Rats?" They refer to themselves as the Rattus Astra, btw.
|
# ? Jul 29, 2023 19:07 |
|
Lamuella posted:This is a great flat black. Reaper Master Series black is also great and a little thinner. Oh, if you want a flat, flat black, go with their NATO Black. I mean, the one is very much not glossy, but the NATO Black is on another level. It's an Air color, so no need to thin. https://acrylicosvallejo.com/en/product/model-air-en/nato-black-71251/
|
# ? Jul 29, 2023 19:17 |
|
|
# ? May 12, 2024 09:20 |
|
AndyElusive posted:Your mind was like "Space Wolves exist, so why not Space Rats? Is that one of the Space Rats?" This led me to the belated discovery that two years ago ThatEvilOne did a kickstarter for a space rats minis collection and called them Vile Rattus. https://www.kickstarter.com/projects/thatevilone/cult-of-vile-rattus-a-cheese-stealer-cult/description
|
# ? Jul 29, 2023 19:20 |