|
Don't use MDF in a humid environment, it will absorb water. Better to go with plywood.
|
# ? Sep 27, 2023 15:07 |
|
|
# ? May 31, 2024 19:09 |
|
Roger
|
# ? Sep 27, 2023 15:17 |
|
I am going to need to buy Keystone (or similar) blocks to put up a retaining wall. The people who are doing the designing and building are having me buy the blocks, probably so that the cashflow is mine rather than theirs. Is there anything that makes some of these blocks safer than others? Are there brands I should prefer? Is there anything I should know when shopping? There is a Home Depot within delivery range of me, but not a Lowe's. There are also a couple of specialty stores that do nothing but sell blocks, and I hope to hit at least one of those. Anything I buy will be shipped several hours, so it's nice that Home Depot includes delivery.
|
# ? Sep 27, 2023 17:22 |
|
MDF isn't ideal but that's the underpinnings of 95% of budget apartment cabinetry in both the kitchen and bathrooms. It will fail if it gets water logged though yeah
|
# ? Sep 27, 2023 18:16 |
|
We had a technician come out and clean our gas fireplace, he pointed out that the burn pan is warped and cracked and suggested replacing it. Cool, pay him and leave a message with their office Three calls later and these people have ghosted me, I guess they don't want the work. I call another company to tell them that we want to replace our cracked burn pan, but they want to do another cleaning and inspection first. This feels like a trap, like they could wind up doing the same thing after "cleaning" an already clean fireplace. Replacing it myself seems kind of scary, anyone itt work on a gas fireplace? Am just being a chicken?
|
# ? Sep 28, 2023 03:21 |
|
Had one replaced recently (last year) at the MIL house, and while chatting with the repair guy, he said that the biggest issue is getting the replacement parts - many are just not made anymore. Replacing them isn't hard, since you are not playing with the gas lines themselves. The "we gotta clean it first" is probably a case that too many people just call for repair and it's impossible to work on it without cleaning it (or a clean fixes the problem).
|
# ? Sep 28, 2023 03:40 |
|
QuarkJets posted:We had a technician come out and clean our gas fireplace, he pointed out that the burn pan is warped and cracked and suggested replacing it. Cool, pay him and leave a message with their office What’s scary about it? The two I’ve worked on all come apart easily for maintenance and part replacement and the burny part is about as complex as a propane grill. If you look up the manual for yours it will show you the part number you need and if you’re really lucky it’ll have replacement instructions
|
# ? Sep 28, 2023 03:50 |
|
Hadlock posted:MDF isn't ideal but that's the underpinnings of 95% of budget apartment cabinetry in both the kitchen and bathrooms. And every production built subdivision house I’ve ever seen.
|
# ? Sep 28, 2023 04:19 |
|
Tiny Timbs posted:What’s scary about it? The two I’ve worked on all come apart easily for maintenance and part replacement and the burny part is about as complex as a propane grill. The instruction manual is full of diagrams but this particular part is not one of the labeled pieces, so I'm just left to guess. Looking around at part websites and comparing those pictures + part numbers to the list of part numbers and vague descriptions in the manual, I think that I've identified the right thing. But I'm not certain, and that sucks. But if I'm right, I could save probably a few hundred dollars. Anyway I think it's this thing: This is the bottom side, the other side is what's under the fake logs and rocks. I don't know what the deal with the tube is. The installation manual doesn't show how to remove or replace this piece, I think the fireplace came with it pre-installed. So to be really certain that this is what I need, I'd have to do some exploratory surgery and that sounds like a pain in the rear end This is the piece that's supposed to ensure a specific distribution of flames. I don't know what the consequences are if I gently caress up the installation It looks like just 4 screws, but does that tube need to be seated in some special way? Is it connected to the gas line? It's a mystery QuarkJets fucked around with this message at 05:55 on Sep 28, 2023 |
# ? Sep 28, 2023 05:52 |
|
Yeah do some exploratory stuff to figure out how it fits together. It’s not that bad, I promise. Just dirty. All that stuff will be after the valve so if you make sure it’s shut nothing will explode (check the manual for how to confirm with electronic valve controls).
|
# ? Sep 28, 2023 16:44 |
|
Is there a good way to tell what kind of counters I have? They look like quartz to me, but I'm not a counter expert:
|
# ? Sep 30, 2023 22:05 |
|
We keep telling you man, ask your lawyer! Nah I'm playing. No idea. Look nice though.
|
# ? Sep 30, 2023 22:14 |
Look underneath them. Quartz is usually conspicuously marked by the manufacturer.
|
|
# ? Sep 30, 2023 22:24 |
|
Get a detail shot where the "vein" meets the white, maybe dial the contrast up far enough it doesn't look like it was taken with a potato My guess is quartz as well tho, or maybe poured epoxy
|
# ? Oct 1, 2023 00:00 |
|
I want to replace my old 30" over-oven external vented microwave with one that has a convection oven feature. Are there any brands folks could recommend?
|
# ? Oct 1, 2023 04:58 |
|
The Slack Lagoon posted:I want to replace my old 30" over-oven external vented microwave with one that has a convection oven feature. Are there any brands folks could recommend? There are only two or so actual companies that make microwaves, the rest are rebadges. I can't remember the other name but Panasonic is one of them, make sure you get an Inverter one.
|
# ? Oct 1, 2023 09:25 |
|
distortion park posted:There are only two or so actual companies that make microwaves, the rest are rebadges. I can't remember the other name but Panasonic is one of them, make sure you get an Inverter one. All counter top microwaves are some by Midea.
|
# ? Oct 1, 2023 13:05 |
|
I saw some paint bubbling around the backside of my fireplace so I've had some people come out to take a look at the chimney/flashing to see what needed to be repaired. The roofs guys all said the flashing is great and the roof is less than 10 years old. They pointed out some cracks in the chimney and recommended that I just go up there with caulk and seal it myself. I've had two chimney repair companies come out to take a look as well. One of them said he would spray sealant around the chimney and pointed out a crack on an air duct that he would fix as well. The other company wants to repair the cracks with caulk and mortar then spray sealant along with resurfacing the crown. Cost wise it's only a few hundred difference between the two so money isn't my motivating factor I just have no idea if I'm being taken for a ride with the extra services. I'm in Southern California and we never use our fireplace so our only concern is making sure that the leaks stop so that I can repair the drywall.
|
# ? Oct 4, 2023 21:09 |
|
I would like a rec for mold cleaning chemicals for my bathtub. There is an obnoxious nook in it for a handle which is very difficult to scrub. When I re-painted the drat thing the pain formed some uneven surfaces behind the handle that mold loves. I cannot get anything larger than a toothbrush in there to scrub, and Lysol spray is not cutting it.
|
# ? Oct 4, 2023 22:51 |
|
pokie posted:I would like a rec for mold cleaning chemicals for my bathtub. There is an obnoxious nook in it for a handle which is very difficult to scrub. When I re-painted the drat thing the pain formed some uneven surfaces behind the handle that mold loves. I cannot get anything larger than a toothbrush in there to scrub, and Lysol spray is not cutting it. Spor-Klenz.
|
# ? Oct 4, 2023 23:24 |
|
Isn't spor klenz mostly vinegar anyway?
|
# ? Oct 5, 2023 03:15 |
|
Spikes32 posted:Isn't spor klenz mostly vinegar anyway? 22% Hydrogen peroxide, 4.5% Peroxyacetic acid, and then ~10% acetic acid (aka vinegar) I was mostly kidding either way, because it smells horrific, burns if you breathe it, and is expensive as gently caress. Don't clean your home bathroom with sporklenz
|
# ? Oct 5, 2023 03:57 |
|
I always felt so bad for the cleaners who had to use it for the monthly cleans. Stuck wiping down walls and floors with that stuff for hours sometimes
|
# ? Oct 5, 2023 05:47 |
|
Am I doing poo poo wrong or is finding someone halfway capable of fixing or even looking at literally anything wrong with a home nearly impossible nowadays? Maybe it's both. poo poo I can't even figure out how to get new pillows and sheets that aren't poo poo, so it's definitely something wrong with me, but I don't think it's just my normal incompetence but itself... Im so tired of shopping for stuff that doesn't seem to exist. -_- At least the poison ivy removal is going well and the new toilets I installed are working great. Unfortunately, "working great" seems to be an outcome exclusive to things that I've had to do entirely on my own without help at this point, and I really am not qualified to do most of this work in a way that isn't going to end badly...
|
# ? Oct 5, 2023 07:52 |
In general the people who you want to look at poo poo don't have to advertise to get business so they are hard to find and booked out for weeks. On the other hand people who you don't want to work on it advertise everywhere and are immediately available. It sucks but word of mouth tends to be the best way to find good help. The best contractors tend to travel in packs because they like to work with competent people, so if you find one good one it is a good idea to ask them for recommendations for other trades.
|
|
# ? Oct 5, 2023 10:59 |
|
pokie posted:I would like a rec for mold cleaning chemicals for my bathtub. There is an obnoxious nook in it for a handle which is very difficult to scrub. When I re-painted the drat thing the pain formed some uneven surfaces behind the handle that mold loves. I cannot get anything larger than a toothbrush in there to scrub, and Lysol spray is not cutting it. Scrubbing Bubbles Foaming Bleach Spray does a good job on bathroom mold in my experience. Just... don't combine it with anything. Because it's bleach. I don't know what all it has in it that sets it apart from just a diluted bleach/water mix in a spray bottle, but it seems to work way better. Supposedly Concrobium spray is mold-specific and does a better job, but I haven't had as good luck with it. edit: I've also used the Scrubbing Bubbles to somewhat successfully mitigate artillery fungus in mulch. At least I think so... seems to slow it down, at least. DaveSauce fucked around with this message at 13:28 on Oct 5, 2023 |
# ? Oct 5, 2023 13:24 |
|
Just not ammonia (which is in most window cleaners as well fyi) Baddog edit - I'm gonna edit this poo poo out because I don't want to even take the chance that someone scans just this one post and is like "oh yah ok that sounds like a plan". Even if this one is almost to the level of known dumbass joke advice. (USER WAS PUT ON PROBATION FOR THIS POST) Somebody fucked around with this message at 20:12 on Oct 5, 2023 |
# ? Oct 5, 2023 17:47 |
|
Quaint Quail Quilt posted:I'm pretty sure you can mix bleach and vinegar and a lot of other things. Please stop giving advice on things you don't understand that are actively harmful to others. You should NEVER mix bleach and vinegar. Depending on the relative concentrations it will give off chorine gas.
|
# ? Oct 5, 2023 17:54 |
|
Quaint Quail Quilt posted:I'm pretty sure you can mix bleach and vinegar and a lot of other things. Yeah this is poo poo advice. Educate yourself before posting about poisons. https://doh.wa.gov/community-and-environment/contaminants/bleach-mixing-dangers
|
# ? Oct 5, 2023 18:01 |
|
Never expected to see that posted here lmfao don’t kill yourself goons
|
# ? Oct 5, 2023 18:06 |
|
Fast avatar purchase, wow.
|
# ? Oct 5, 2023 18:19 |
|
Muddle mint leaves, gin, bleach, and vinegar together with crushed ice for a refreshing summer highball that everyone at your garden party will love.
|
# ? Oct 5, 2023 18:24 |
|
Quaint Qhlorine Quills
|
# ? Oct 5, 2023 18:24 |
|
GlyphGryph posted:Am I doing poo poo wrong or is finding someone halfway capable of fixing or even looking at literally anything wrong with a home nearly impossible nowadays? Maybe it's both. poo poo I can't even figure out how to get new pillows and sheets that aren't poo poo, so it's definitely something wrong with me, but I don't think it's just my normal incompetence but itself... Contractors are all giving out “make it worth my while” quotes so everybody has to turn into a handyman if they actually want anything done.
|
# ? Oct 5, 2023 18:28 |
|
What’s a good humidity level for an unfinished basement with no HVAC, but does have the condensate lines for the HVAC system running into a floor drain
|
# ? Oct 5, 2023 18:32 |
|
Upgrade posted:What’s a good humidity level for an unfinished basement with no HVAC, but does have the condensate lines for the HVAC system running into a floor drain 50 is a good general all season target. You definitely want it under 60 in the summer and depending on how cold it gets in your area and depending on if you have a humidifier in the conditioned parts of your home you may find it down to 20 or 30 in the winter.
|
# ? Oct 5, 2023 18:35 |
|
Motronic posted:50 is a good general all season target. You definitely want it under 60 in the summer and depending on how cold it gets in your area and depending on if you have a humidifier in the conditioned parts of your home you may find it down to 20 or 30 in the winter. Oh good, my dehumidifier can keep it around 45 easily.
|
# ? Oct 5, 2023 18:39 |
|
Shifty Pony posted:In general the people who you want to look at poo poo don't have to advertise to get business so they are hard to find and booked out for weeks. On the other hand people who you don't want to work on it advertise everywhere and are immediately available. I resisted for a long time but eventually succumbed and registered with Nextdoor very recently for this reason. Between nextdoor and a local goon I was able to find a reputable plumber
|
# ? Oct 5, 2023 18:50 |
|
Motronic posted:Please stop giving advice on things you don't understand that are actively harmful to others. I posted about not mixing these two things in this or the fix it fast thread less than two weeks ago!!!!!
|
# ? Oct 5, 2023 19:08 |
|
|
# ? May 31, 2024 19:09 |
|
Lol justice is swift in this thread.
|
# ? Oct 5, 2023 19:10 |