|
Heran Bago posted:I tried multiple Steam Deck setup guides and couldn't get it working. drat I might take a crack at it but doesn't sound promising then
|
# ? Sep 30, 2023 01:37 |
|
|
# ? May 26, 2024 10:10 |
|
Anyone running SteamOS 3.5 for the better performance? How is it?
|
# ? Sep 30, 2023 01:50 |
|
beep-beep car is go posted:Has anyone tried CP2077 Phantom Liberty on the Deck? I played through 1.5 all the way on my Deck and got a decent 30-40 FPS the whole time, but some folks said online that PL is a lot more detailed and action-packed so I wasn't sure if it was going to cause a noticeable performance hit. Deckverse dude says his golden 40 setup is still the way to go but to adjust fps to 30 @ 60hz for PL as it is a little more intense, yeah. Here are the settings. It’s what I’ve used for a good while now and they’re good: quote:
|
# ? Sep 30, 2023 01:53 |
|
other people posted:Sorry I should have said, a 1TB nvme is supposed to arrive Monday so I can have fun hopefully not breaking it and reinstalling everything. If you've got an SSD enclosure it's pretty simple (a few command line commands, though I'm real comfortable in that environment) to mirror your current Steam Deck's internal drive onto the external one such that when you put it in internally it acts exactly like it did before, only with much more space. 'twas nice to not have to reinstall BG3 a 4th time while I was diagnosing hardware issues.
|
# ? Sep 30, 2023 05:21 |
|
Just in case anyone runs into this issue, the latest update of Duckstation hosed up my controller bindings, I had to go back into Desktop mode, open Duckstation and auto bind Controller 1 mappings to the SDL virtual joypad again. It wouldn’t work in Game mode when playing a PS1 game.
|
# ? Sep 30, 2023 10:30 |
|
Thanks for the advice! Turns out it's super simple to install Decky/Cryo and they're all running perfectly now! I spent half an hour researching the BEST RE4 settings instead of actually playing it. It's a curse
|
# ? Sep 30, 2023 13:06 |
|
Happy Noodle Boy posted:Deckverse dude says his golden 40 setup is still the way to go but to adjust fps to 30 @ 60hz for PL as it is a little more intense, yeah. This seems unnecessarily conservative from purely eyeballing it, which means I could be talking rubbish. I had most of those much higher pre-Moonlight streaming and still got 35-40 fps which is way fine if you're targeting 30 . There's stuff being given up in there that doesn't have much of a performance impact but does impact visual quality. The BenchmarKing video for pre-2.0 or the recent Hardware Unboxed one are more reasonable. The HUB settings pretty much mirror the older suggestions, except for being more and, imo unnecessarily, conservative on RT (this is the showcase game for RT and imo the goal should be to tweak settings to enable as much RT as you can, not try for high fps at all cost - but imo).
|
# ? Sep 30, 2023 14:27 |
|
v1ld posted:MoonDeck has a Decky Loader plugin where I set a custom resolution - in the Deck's ... menu for the MoonDeck plugin - of 1280x720@60hz and it Just Works(tm) (720p since 16:9 is wider than 1610, unintuitive though that is). It swaps my laptop's main display over to that res when I launch a game. It seems to leave in that resolution, but I don't care since for work usage that laptop is plugged into the ultrawide monitor. But I would think if you reset it to native, it would switch it over on each use. I've set this up in moondeck buddy but I still had black bars top and bottom so I don't think it works quite right for me. I thought sunshine had a similar setting where you could set the resolution before and reset it after automatically though. I'm also wondering if it can set it to a 16:10 that my monitor doesn't actually support (2560x1600 I think). Would be nice but maybe I'll just have to set it to 800p.
|
# ? Sep 30, 2023 15:08 |
|
Alan_Shore posted:Thanks for the advice! Turns out it's super simple to install Decky/Cryo and they're all running perfectly now! RE4 worked fine out of the box for me.
|
# ? Sep 30, 2023 15:16 |
|
Gophermaster posted:RE4 worked fine out of the box for me. What's your fps? Mine fluctuates between 30-60. Looks pretty good though! Wish I could lock it to 40 for a smoother experience but you get used to it
|
# ? Sep 30, 2023 15:28 |
|
So, I remember reading that there was some bug where you couldn't adjust the GPU frequency? I didn't really pay attention to it because I wasn't experiencing it, but all of a sudden I am - I added a GBC game and wanted to set the TDP and GPU to the lowest settings since they aren't needed, but the GPU is pegged at 1600. I adjust it down, and as soon as I move the selector off the bar, it pops back to max. Also, when I hit the GPU adjust toggle, to "turn it off and on again", the adjustment bar doesn't disappear What should I do?
|
# ? Sep 30, 2023 16:15 |
|
I’ve heard about The Saboteur for years but never played it, then saw that it’s on sale on gog. It took a little tinkering but I’ve now got it running through the heroic launcher. So far frame rates have been steady and the only issue is some random graphical glitches on shadows and carpets, but that’s not making it any less fun plowing through and murdering nazis.
|
# ? Sep 30, 2023 16:37 |
|
Annath posted:So, I remember reading that there was some bug where you couldn't adjust the GPU frequency? That stopped for me on the latest update
|
# ? Sep 30, 2023 17:19 |
|
Using RetroArch (installed via EmuDeck) and I keep getting a "could not communicate with https://retroachievements.org/" error in both gaming and desktop modes. I've tried updating everything and resetting RetroArch's configs through EmuDeck. Standalone emulators and even RetroArch on my other devices work fine. Anyone else having this issue, or maybe have dealt with it in the past?
|
# ? Sep 30, 2023 18:43 |
|
Man I stopped at Best Buy today and they had *5* open box Rogue Allies. Must be super great if they get them returned like that.
|
# ? Sep 30, 2023 21:40 |
|
Annath posted:So, I remember reading that there was some bug where you couldn't adjust the GPU frequency? A Gameboy Color game? Set everything to default / automatic. Set refresh rate and FPS limit to 60. Emulators are very timing-dependant and expect full power at 60.
|
# ? Sep 30, 2023 21:47 |
|
Heran Bago posted:A Gameboy Color game? Set everything to default / automatic. Set refresh rate and FPS limit to 60. Huh, I always keep the FPS unlocked, because changing that fucks a lot of stuff up, but I've never had an issue with turning down the power. Granted I don't turn it down to the bottom on every game, or even most, but I almost always turn it down and I've never had an issue. Pretty much every game I play, both Steam and non-steam, gets it's own power profile to maximize battery life. That's the Deck's biggest weakness.
|
# ? Sep 30, 2023 22:15 |
|
Medullah posted:Man I stopped at Best Buy today and they had *5* open box Rogue Allies. Must be super great if they get them returned like that. It actually is super great I use mine on the regular.
|
# ? Sep 30, 2023 23:16 |
|
Alan_Shore posted:What's your fps? Mine fluctuates between 30-60. Looks pretty good though! Wish I could lock it to 40 for a smoother experience but you get used to it I lock the FPS to 40 and it stays there most of the time. Use the steam deck settings to lock the refresh rate.
|
# ? Oct 1, 2023 01:39 |
|
For Bluetooth the Deck now priorities negotiating AptX LL (Low Latency) if the codec is available which is nice for a gaming device. Wasn't the case at launch where I had to edit the BT configs to force LL with this same BT DAC.
|
# ? Oct 1, 2023 03:53 |
|
Deck has now wiped two of my cloud saves Think I'll uh, not use it for a bit till I figure out what the gently caress
|
# ? Oct 1, 2023 09:15 |
|
I know no-one outside Valve really knows, but is there a gut feeling on how far out we are from 3.5 being the main/stable release? I'm thinking of picking up Cyberpunk; it sounds like the combination of the 2.0 update and SteamOS 3.5 make it a better overall experience on the Deck. But being a toddler-dad my playtime is very limited, so I'm happier to just hold off until it's in stable rather than futz around with the preview releases. Mainly just wondering if I should pick it up while it's on Ł30 sale today, or whether we're talking another 3 months for 3.5 stable and it's likely to be on sale again before then..
|
# ? Oct 1, 2023 11:11 |
|
Medullah posted:Man I stopped at Best Buy today and they had *5* open box Rogue Allies. Must be super great if they get them returned like that. My local fb marketplace is pretty loaded with them too. There is one especially funny person with theirs listed at msrp (for a used ally) calling it the steam deck killer, as some sort of sales pitch.
|
# ? Oct 1, 2023 11:59 |
Beve Stuscemi posted:My local fb marketplace is pretty loaded with them too. There is one especially funny person with theirs listed at msrp (for a used ally) calling it the steam deck killer, as some sort of sales pitch. I test drove one at a store here and it was very uncontrollable to hold and play. Battery also drained fast. Screen looked nice, but the Deck was better in just about every other way.
|
|
# ? Oct 1, 2023 12:30 |
|
Froist posted:I know no-one outside Valve really knows, but is there a gut feeling on how far out we are from 3.5 being the main/stable release? For what it's worth, I've been using 3.5 for a month and it's been mostly stable. I've had a couple issues with the suspend feature needing a hard reset.
|
# ? Oct 1, 2023 15:17 |
|
The only issue I've seen in max volume dropping, which you can fix by going to Desktop mode and re-enabling the 150% volume option. Though I had to reboot to fix it one of the two times it's happened with 3.5. Otherwise very stable. I'm playing CP 2077 too but streaming from my PC now though I started with direct on Deck. I wouldn't wait to play it, it's stable enough right now.
|
# ? Oct 1, 2023 15:36 |
|
Is the colour meter thingy coming in 3.5? I was about to uninstall vibrantdeck, since isn't that supposed to take over its duties anyway (?) but I couldn't find the options for it.
|
# ? Oct 1, 2023 15:37 |
|
That's a 3.5 addition yeah.
|
# ? Oct 1, 2023 15:38 |
|
Can anyone running the latest Stable build check Cultic for me please? After the latest update, the game will load but there's nothing displaying except the Hud. I can hear the game running in the background but it's like it's not rendering anything 3D. I've tried reinstalling, clearing Proton Cache, clearing cloud saves etc but it's still not working. Thanks!
|
# ? Oct 1, 2023 15:45 |
|
Anyone know how to change the car radios in Cyberpunk on the Dreck? Feel like I've pressed all the buttons at this point, to no avail. As it stands I just steal different vehicles until one's playing something I like. Then leave it behind when I get to my destination.
|
# ? Oct 1, 2023 16:43 |
|
Finally tried out gyro aiming and I see the light. It’s so good
|
# ? Oct 1, 2023 16:47 |
|
Hammer Bro. posted:Anyone know how to change the car radios in Cyberpunk on the Dreck? The default controller button would be holding down the right bumper until a menu pops up but I dunno if it’s different on the ‘alternate’ schemes they added
|
# ? Oct 1, 2023 16:48 |
|
Hammer Bro. posted:Anyone know how to change the car radios in Cyberpunk on the Dreck? Long press R1/RB on the controller I think.
|
# ? Oct 1, 2023 16:51 |
|
I brought over my Steam Deck to a friend's house the other day and docked it to play some MK1 and SF6. MK1 went over perfectly. But for some reason, SF6 wasn't recognizing any inputs. It wouldn't recognize my arcade stick, my controller, or even the buttons on the Deck itself. I could access the Steam Deck menus no problem, and even going into the controller settings, see the controllers being there, but the game itself didn't respond. Anyone else have this issue?
|
# ? Oct 1, 2023 17:07 |
|
Beve Stuscemi posted:My local fb marketplace is pretty loaded with them too. There is one especially funny person with theirs listed at msrp (for a used ally) calling it the steam deck killer, as some sort of sales pitch. I know someone who bought a bunch absolutely convinced they were going to sell out like the SD and that he'd be able to double his money scalping them. Don't know how that went, but I can guess since I haven't heard anything about it since. I wonder if he's uniquely stupid or if a bunch of people did the same thing.
|
# ? Oct 1, 2023 17:39 |
|
Paradoxish posted:I know someone who bought a bunch absolutely convinced they were going to sell out like the SD and that he'd be able to double his money scalping them. Don't know how that went, but I can guess since I haven't heard anything about it since. Scalpers are dumb as gently caress. There were a lot of PS5s that glutted local markets priced over retail long after Sony caught up with demand.
|
# ? Oct 1, 2023 17:41 |
|
I'm getting a persistent and incredibly annoying issue where the steam loading logo does not disappear after starting a game thing is, the game IS started, if I push either steam button it's visible running fine in the background, but as soon as I leave the menu the loading screen pops up again only fix is rebooting - anyone know how to fix this?
|
# ? Oct 1, 2023 18:25 |
|
victrix posted:I'm getting a persistent and incredibly annoying issue where the steam loading logo does not disappear after starting a game I've seen this too and rebooting is the answer.
|
# ? Oct 1, 2023 21:18 |
|
what are the best Pokémon romhacks to load on this puppy
|
# ? Oct 1, 2023 21:40 |
|
|
# ? May 26, 2024 10:10 |
|
sailormoon posted:what are the best Pokémon romhacks to load on this puppy I like: Pokémon Prism Pokémon Sacred Gold Pokémon Theta Emerald Renev
|
# ? Oct 1, 2023 21:43 |