|
occurred to me earlier, there's art of jump-sentinels from the TCG, yeah? with how they seem to be avoiding a regular sentinel for them, pretty good chance we see those return in some form Yvonmukluk posted:It straight up has the classic 3rd edition sentinel legs, right? depends how literal you mean; they're obviously interpreting some of the specific details more closely than the revised 40K design, but at the same time they're also restyling it for the hermes and aethon to include details of that revision and features of other solar designs, so it's not identical
|
# ? Feb 2, 2024 16:35 |
|
|
# ? May 25, 2024 05:13 |
|
Assessor of Maat posted:occurred to me earlier, there's art of jump-sentinels from the TCG, yeah? with how they seem to be avoiding a regular sentinel for them, pretty good chance we see those return in some form This would make a lot of people I know very happy.
|
# ? Feb 2, 2024 16:46 |
|
Was looking for mk3 armor again at my LGS and they didn't have anything in stock; apparently GW warehouse was hit with a blizzard and then flooded and now all the orders are back stocked by multiple weeks. Also I'm kind of pissed that the assault marines box is only ten units and it's the same price as the 20 unit tactical squad. I can't keep up with the price increases, shrinkflation, or the greed
|
# ? Feb 2, 2024 23:44 |
|
I mean, I wish the stuff was cheaper too, but the assault marines required twice as many sprues as the tacticals, it's not 'shrinkflation'
|
# ? Feb 3, 2024 04:47 |
|
smug jeebus posted:I mean, I wish the stuff was cheaper too, but the assault marines required twice as many sprues as the tacticals, it's not 'shrinkflation' Not quite. A 20-man tactical kit is four five-man half-sprues and two sergeant-specific quarter-sprues, for a total of 2.5 full sprues. A ten-man assault kit is two five-man half-sprues and one jetpack-and-sergeant half-sprue, for a total of 1.5 full sprues. You really are getting less plastic as well as fewer guys in the assault box, but it's not as bad as half as much. (Uh, for reference here, a full sprue is what I'm calling the biggest sprue GW makes, the kind that requires a 12" x 8 1/2" box; a half-sprue is half that size and is, like, one tactical marine sprue; the smallest sprues GW makes are eighth-sprues, which they use for individual characters.)
|
# ? Feb 3, 2024 07:06 |
|
Yeah, the Assault Marine kit is a great kit; but I’d say undeniably overpriced for the actual amount of plastic in it. I was stunned when I first saw the price.
|
# ? Feb 3, 2024 16:23 |
|
At least its a better deal than the primaris jump pack squad!
|
# ? Feb 3, 2024 20:18 |
|
what miniatures do you guys use for militia? what im looking for are the ability to swap out bits (so not one solid mold) with other bits, and stuff that may not be immediately recognizable as a historical figurine.
|
# ? Feb 7, 2024 01:18 |
|
I am considering the Grognards from Wargame Atlantic.
|
# ? Feb 7, 2024 05:49 |
|
If you don’t like napoleonic french, that same range has space infantry plastic kits in fallschirmjäger, viking, redcoat/pith helmet, and US Vietnam flavours.
|
# ? Feb 7, 2024 15:41 |
|
There's also the space jumpsuit flavor, but their guns are awfully undetailed
|
# ? Feb 9, 2024 16:14 |
|
Edgar Allen Ho posted:If you don’t like napoleonic french, that same range has space infantry plastic kits in fallschirmjäger, viking, redcoat/pith helmet, and US Vietnam flavours. Don't forget 'Literally Space/Colonial Marines' and the Dreamforge stuff, although I kind of feel the latter's a bit too Wehraboo flavoured for my tastes. For more rag-tag there's the Broken from Maelstrom's edge, or the various Stargrave miniatures.
|
# ? Feb 9, 2024 16:42 |
|
Spotted something. This design element here: Is also present on the inside of the shins of the new scimitar jetpack rider sprue: Did that kind of striated interior armor cross-section ever appear on a Heresy 1st edition ForgeWorld sculpt, or is that a new piece of design language that's been introduced in just these two kits so far? Of course, there is precedent in 40k for that being what space marine plate looks like under the outer layer: Although this does raise the question of why elite Blood Angels just... take off the outer layer of their armor for visual effect. Previously that seemed to be sculpted detail; with the context of these two Heresy kits it now appears to be interior engineering. (Also why are you wearing less armor, bomb squad consul?) Stephenls fucked around with this message at 23:32 on Feb 9, 2024 |
# ? Feb 9, 2024 23:29 |
|
Mephiston’s armour is unique, not just missing bits. In the lore it’s supposed to resemble glistening exposed muscle. He’s been like that for as long as I remember.
|
# ? Feb 9, 2024 23:54 |
|
The turret gunners on the tank sprue also have similar armour
|
# ? Feb 9, 2024 23:55 |
|
Yeah it's clearly influenced by the Dracula armor by Bram Stoker.
|
# ? Feb 9, 2024 23:57 |
|
Edgar Allen Ho posted:Mephiston’s armour is unique, not just missing bits. In the lore it’s supposed to resemble glistening exposed muscle. He’s been like that for as long as I remember. He's not the only Blood Angel who has that striated armor design, though -- there'd been breastplates like that on blood angel upgrade sprues. I'm pointing out the resemblance because it reminds me of e.g. the Plagueburst Crawler being retroactively made a modern Death Guard development on the Arquitor Bombard, despite the Bombard being designed after the Crawler. Improbable Lobster posted:The turret gunners on the tank sprue also have similar armour Good catch! Stephenls fucked around with this message at 00:18 on Feb 10, 2024 |
# ? Feb 10, 2024 00:08 |
|
I don’t think it’s connected to Mephiston at all. Sculpted ornate artificer armour vs exposure of gubbins under plates
|
# ? Feb 10, 2024 01:25 |
|
I'll be honest, I wasn't even thinking of Mephiston when I drew that comparison, he was just an easier image to find on the GW webstore. The actual thing I was thinking of was this: Lower right breastplate.
|
# ? Feb 10, 2024 04:31 |
|
you're overthinking it
|
# ? Feb 10, 2024 05:03 |
|
Stephenls posted:I'll be honest, I wasn't even thinking of Mephiston when I drew that comparison, he was just an easier image to find on the GW webstore. The actual thing I was thinking of was this: Pretty sure it's just a blood angels decorative thing. Astorath has the same getup and it's part of his bling.
|
# ? Feb 10, 2024 07:54 |
|
yeah, though similar to dante and tycho's fancy nipple armour it was specifically part of mephistion's dracula gimmick until 5th rolled it out more broadly for the new heresy kits I would assume they were mostly thinking of the times a sculptor has been winging it for dead marines on a character's base (and maybe some of the odder C100/RT01/RT101 marines) and how to work it into a consistent visual language
|
# ? Feb 10, 2024 08:50 |
|
ijyt posted:you're overthinking it This would admittedly be very in-character for me.
|
# ? Feb 10, 2024 09:09 |
|
The Emperor, circa M2, showing off what would later become a cornerstone of Blood Angels bling
|
# ? Feb 10, 2024 10:06 |
|
The Demilich posted:The Emperor, circa M2, showing off what would later become a cornerstone of Blood Angels bling Is that the Scrotal-pattern armour from the Witcher?
|
# ? Feb 10, 2024 10:08 |
|
Z the IVth posted:Is that the Scrotal-pattern armour from the Witcher? No that's the Nair pattern armor. For missions when you absolutely must look like a freshly plucked nutsack
|
# ? Feb 10, 2024 10:52 |
|
The Demilich posted:No that's the Nair pattern armor. For missions when you absolutely must look like a freshly plucked nutsack This just caused me emotional damage.
|
# ? Feb 12, 2024 15:02 |
|
Z the IVth posted:Pretty sure it's just a blood angels decorative thing. The Jump Pack Chaplain even goes half-and-half on the sculpted exterior vs exposed tendons looks. And has a moustache, for some reason. Besides I think Dante and Mephiston I don't think the real BA aesthetic has really crossed into the Primaris range yet, the BA and original DA Primaris upgrade sprues are pretty barebones compared to the above one (the new DA one and the BT ones are decent though) I'd like to do either fallen Blood Angels or CSM in their style (or an army I can play as either) but would like a range refresh first. Hopefully a new BA frame isn't too far away, although I don't think you can really do replacement chesplates anymore, besides for specific models.
|
# ? Feb 12, 2024 16:53 |
|
I see Endryd is getting a mini with the new book. https://www.warhammer-community.com/2024/02/15/heresy-thursday-endryd-haar-punches-the-heads-off-world-eaters-in-the-battle-for-beta-garmon/ Speculation time since a few new mkV resin characters are starting to crop up, how the gently caress are they going to handle the amount of studs on mkV armour if they also do a plastic release? The amount of complaining over the two part mkVI shoulder was ridiculous and they did that to make the studs properly round.
|
# ? Feb 15, 2024 22:18 |
|
Mr Teatime posted:I see Endryd is getting a mini with the new book. I mean Endryd has square studs, so that might be how they're doing it.
|
# ? Feb 15, 2024 22:36 |
|
You know how the studded pauldron for the new Mk VI is two pieces on the sprue? Imagine that for both legs and the helmet as well.
|
# ? Feb 15, 2024 22:50 |
|
If it's like the Castigator ammo chain, we can expect 3,248 individual studs.
|
# ? Feb 15, 2024 23:22 |
|
What’s the deal there - Is it harder to do round studs in plastic than in resin?
|
# ? Feb 16, 2024 00:15 |
|
From what I understand, yes. Resin lets you get away with some undercuts because the mold is slightly flexible rubber(?), but a steel mold for plastic is much less forgiving. The best you can get in a single piece is what we see on the MkIV - where the sphere has a kinda teardrop tailing off the reverse side. I've found the MkVI shoulders are fine, and if you use plastic cement they're near seamless. But if you super glue them it's a loving fiddly mess that'll look like poo poo.
|
# ? Feb 16, 2024 00:49 |
|
They can split the shoulders in two like on the Mark VIs, although the Mark V apothecary suggests they have a new design for the MkV left shoulder with more, smaller studs to differentiate it from the MkVI left shoulders, which should be interesting, but yeah this suggests they're going to do something complex with the greaves. The MkIII sprue omits the MkVI bayonets to make room for the gauntlet plates, so they do have a degree of extra space on the sprue to play with. If I had to guess I'd say they'll design the new MkV greaves so there's no studs on the back of the legs, only the front, and then they'll have each leg be in two pieces, with either the inner or outer shin as a separate bit you have to slot in on each leg. The other option would be to recess the studs more so they're not fully hemispherical; that increases the angle at which they can be cast. (And yes, the helmets may also need to be in two pieces, with the upper helm bit facing to the side and the faceplate and eye lenses facing to the front.) Stephenls fucked around with this message at 02:05 on Feb 16, 2024 |
# ? Feb 16, 2024 01:59 |
|
BizarroAzrael posted:The Jump Pack Chaplain even goes half-and-half on the sculpted exterior vs exposed tendons looks. And has a moustache, for some reason. I think those are supposed to be ridges but the hard highlight turns it into a moustache. The Eavy Metal team aren't that great with faces tbh and have a habit of using very harsh highlights. Fine for the usual screaming men but for subtlety it doesn't work.
|
# ? Feb 16, 2024 03:30 |
|
comedy option: mkv is in forgeworld resin only
|
# ? Feb 16, 2024 04:29 |
|
ijyt posted:comedy option: mkv is in forgeworld resin only You joke, but these are still for sale. https://www.warhammer.com/en-US/shop/Legion-MkV-Heresy-Armour-2016
|
# ? Feb 16, 2024 05:35 |
|
To be fair the resin mkV are rad as gently caress. Mould is showing its age though you get a lot of bad slip on the legs, had to carve off the studs on some of mine in order to fix them.
|
# ? Feb 16, 2024 05:36 |
|
|
# ? May 25, 2024 05:13 |
|
Mr Teatime posted:To be fair the resin mkV are rad as gently caress. They're also, weirdly, easy to re-pose into being about the same height as the current plastics.
|
# ? Feb 16, 2024 06:09 |