|
Rosalind posted:As someone with a full sized 2070 squeezed into a mini-itx build, the idea of having to move up to a larger case is one of the biggest things keeping me from upgrading so I'm glad to hear that we might see smaller cards soon. This thing has been on my radar for awhile, and I want to eventually replace my living room PC with one of these.
|
# ? Apr 20, 2024 00:11 |
|
|
# ? May 6, 2024 02:46 |
|
FuturePastNow posted:Shouldn't be too hard to mod a fake fireplace display into the side of that Needs to be tied to power consumption, idle on desktop? Barely glowing, oced 14900k and 4090 running at max load? So bright it almost hurts to look at, and instantly attracts any and all cats in a 100m radius.
|
# ? Apr 20, 2024 01:45 |
|
Don Dongington posted:It's really going to depend on the games you play, and which GPU you're currently running. I’m running a 2060 at the moment, you still think it’s a good upgrade? And thanks for all the info Also I play a lot of RPGs, shooters, almost everything tbh. I want to be able to play games on higher settings and have more fps! Fallows fucked around with this message at 03:54 on Apr 20, 2024 |
# ? Apr 20, 2024 03:47 |
|
kliras posted:devastating, vague rumours that nvidia might be working directly in league with the sff perverts: https://twitter.com/VideoCardz/status/1781654858635862133 quote:When the load kicks in, the single fan picks up the speed up to 3100 RPM, which is around 84% of the maximum speed. At a distance of 50 cm away from the card, the noise level rises to 51.4 dBA, much higher than most models, including Colorful’s Ultra OC or even the NVIDIA Founder Edition. The noise level is a clear disadvantage of this design, but at least the fan will stop when the card is idle, so there is that. db chart: galax: 51.4(!!!) igame: 32.2 fe: 28.4
|
# ? Apr 20, 2024 13:06 |
|
I mean it's single slot, what do you expect
|
# ? Apr 20, 2024 13:48 |
|
Yeah, it's a bit like saying 40mm fans in a 1u case being noisy? Also, 51.4db, that reminds me of a PS4 that I got off ebay a while back. Among it's many faults was a fan that I measured at over 80db from more than a meter away. It was ridiculously loud, sort of "busy road traffic" level of discomfort. Still got the pic that I had to send the twat who was complain it was fine... YerDa Zabam fucked around with this message at 14:11 on Apr 20, 2024 |
# ? Apr 20, 2024 14:03 |
|
shrike82 posted:Capcom has released multiple patches for DD2 including one recently that state they're trying to improve DLSS image quality - they seem to be struggling with it technically for some reason i imagine as with other forms of TAA, DLSS doesn't work so well at low and erratic frame rates, and the pc port sports some really bad ones lol
|
# ? Apr 20, 2024 14:08 |
|
YerDa Zabam posted:Yeah, it's a bit like saying 40mm fans in a 1u case being noisy?
|
# ? Apr 20, 2024 14:25 |
|
As much as I love Fractal Design cases, if I’m ever going SFF, it’s going to be a dumbass awesome gimmick like a computer in a toaster or a NES. Spoiler: I’m never going SFF because cases should be huge and have turbo buttons and only be beige colored
|
# ? Apr 20, 2024 16:39 |
|
I started having a GPU problem last night and I could use some thoughts on it. I have a 3080 10GB that I've had since late 2021. I was playing Helldivers 2 and started getting weird video glitching and my monitor would lose signal for a second or two before coming back on. It was erratic and didn't seem to follow any specific event ingame. It was acting very similar to how a 6800GT I had back in 2006 acted before frying itself, which has me worried. I exited the game tried running some 3Dmark benchmarks while checking temps. However, it fails to run any benchmark with Raytracing. It gets a few seconds to a minute in before crashing or freezing on both Speed Way and Port Royal. Time Spy Extreme ran just fine though and returned normal results. I tried doing a clean install of the NVIDIA drivers and while I can play Helldivers 2 without issues now (sample size of an hour or so), the benchmarks still won't complete. I also ran MEMTEST last night to make sure it wasn't another RAM issue, but my PC passed a full test. Any thoughts on what it could be or what other tests I could do to try to narrow down the issue?
|
# ? Apr 20, 2024 19:43 |
|
SpartanIvy posted:I started having a GPU problem last night and I could use some thoughts on it. I have a 3080 10GB that I've had since late 2021. By clean install did you mean running DDU and uninstalling the old drivers first?
|
# ? Apr 20, 2024 19:46 |
|
change my name posted:By clean install did you mean running DDU and uninstalling the old drivers first? e:Just used DDU from Safe Mode to uninstall the driver, and then reinstall and the Speed Way benchmark is still failing a few seconds in. SpartanIvy fucked around with this message at 20:17 on Apr 20, 2024 |
# ? Apr 20, 2024 19:55 |
|
Sounds like EK is rapidly circling the toilet: https://www.youtube.com/watch?v=b73xG1HlFhY
|
# ? Apr 20, 2024 20:00 |
|
SpartanIvy posted:I used the NVIDIA recommended "CleanupTool" to uninstall the old drivers first. Fingers crossed for you that it is a weird driver thing related to RT. If not then it may be something wrong with the actual RT cores on the chip. Driver seems more likely. https://www.guru3d.com/download/display-driver-uninstaller-download/ Just noticed your edit Also, Hell Divers 2 doesn't have RT, so it appears to be a more general issue. Next, I'd try a fresh install of Windows and the game etc. Maybe on a spare drive if you have one, save nuking the whole thing? Actually, before that I'd also try some different DP/HDMI cables, that has hosed me recently YerDa Zabam fucked around with this message at 20:28 on Apr 20, 2024 |
# ? Apr 20, 2024 20:20 |
SpartanIvy posted:I started having a GPU problem last night and I could use some thoughts on it. I have a 3080 10GB that I've had since late 2021.
|
|
# ? Apr 20, 2024 20:25 |
|
YerDa Zabam posted:
Turmoil posted:How old is your PSU?
|
# ? Apr 20, 2024 20:32 |
|
The PSU seems unlikely to be the problem. Typically, an under-spec or malfunctioning PSU will just cause a complete loss of power, not application or driver crashing. You could try setting a negative GPU clock offset in MSI afterburner and see if that helps. (-100MHz or so.) It could also be caused by one of the VRAM chips going bad.
|
# ? Apr 20, 2024 20:41 |
|
Dr. Video Games 0031 posted:The PSU seems unlikely to be the problem. Typically, an under-spec or malfunctioning PSU will just cause a complete loss of power, not application or driver crashing. I'm now running a 1 hour VRAM test from a program called OCCT, which I have not used before, but it seems to be legitimate. e: My girlfriend has a 2080 Super in her computer. I'll swap that into mine and see if the issue persists just to eliminate the rest of the PC as a variable. e2: VRAM test came back without errors. My girlfriends 2080S won't fit in my case so I can't with it, and the 1660 we have will fit but it doesn't support the raytracing benchmarks e3: I don't know what the gently caress is going on but it managed to finish the Speed Way benchmark finally. I literally didn't do anything that should have affected it. SpartanIvy fucked around with this message at 22:36 on Apr 20, 2024 |
# ? Apr 20, 2024 20:59 |
|
I once had dust building up on the PCB cause a video card to flake out, but that was back in the days when the RAM chips had pins on the sides and some dust had shorted a pair of pins (modern cards have been using BGA forever, which while not entirely impervious to contamination is much much harder for air/debris to get into). Cleaning the card resolved it. Also undervolting wouldn't help stability at all and could potentially make it worse. If anything dragging the power limit up and then applying a negative clock offset and or dragging the temperature limit down would push things into the more stable range. Make sure afterburner isn't doing something stupid to clocks/power/thermals by resetting all afterburner settings entirely to default and disabling any low level voltage settings in it.
|
# ? Apr 20, 2024 22:35 |
|
Check for hairline cracks around the locking tab on the card. The weight of some bigger gpus can cause cracks to form when they aren't supported properly. I've seen a few 3080's on the second hand market with that issue, especially gigabyte.
|
# ? Apr 20, 2024 22:59 |
|
tehinternet posted:Spoiler: I’m never going SFF because cases should be huge and have turbo buttons and only be beige colored No to turbo buttons, yes to key locks.
|
# ? Apr 20, 2024 23:06 |
|
Craptacular! posted:No to turbo buttons, yes to key locks. typing one handed
|
# ? Apr 20, 2024 23:08 |
|
tehinternet posted:typing one handed I was thinking mainly of the Apple Quadra 900, a behemoth PC that was the boxiest beige box that ever boxed, and had a car-ignition style lock in the upper corner. Not even as a door panel like a lot of Antec tower cases. I'd strive to have a computer that looks like that these days except that they all need to be windtunnels to cool the components these days.
|
# ? Apr 20, 2024 23:14 |
|
tehinternet posted:As much as I love Fractal Design cases, if I’m ever going SFF, it’s going to be a dumbass awesome gimmick like a computer in a toaster or a NES.
|
# ? Apr 20, 2024 23:15 |
|
Indiana_Krom posted:I once had dust building up on the PCB cause a video card to flake out, but that was back in the days when the RAM chips had pins on the sides and some dust had shorted a pair of pins (modern cards have been using BGA forever, which while not entirely impervious to contamination is much much harder for air/debris to get into). Cleaning the card resolved it. Also undervolting wouldn't help stability at all and could potentially make it worse. If anything dragging the power limit up and then applying a negative clock offset and or dragging the temperature limit down would push things into the more stable range. Make sure afterburner isn't doing something stupid to clocks/power/thermals by resetting all afterburner settings entirely to default and disabling any low level voltage settings in it. I doubt it's dust related because I dusted my computer a few months ago so it's fairly good at the moment, plus my GPU is encased in a block, so it's unlikely dust would find a way in. Kaewan posted:Check for hairline cracks around the locking tab on the card. The weight of some bigger gpus can cause cracks to form when they aren't supported properly. I've seen a few 3080's on the second hand market with that issue, especially gigabyte. Per my earlier posts edit, I was able to get the Speed Way benchmark to finish maybe 2 times total, but there doesn't seem to be any pattern to it. I found an old 250GB SSD so I guess I'll try a fresh copy of windows to see if that changes the results, but I'm not hopeful.
|
# ? Apr 20, 2024 23:19 |
Dr. Video Games 0031 posted:The PSU seems unlikely to be the problem. Typically, an under-spec or malfunctioning PSU will just cause a complete loss of power, not application or driver crashing. Not necessarily, but I did want to at least rule that out. Given the age and wattage of the PSU it shouldn't be a problem. I had reused a 750 watt EVGA PSU in a machine a few years ago not really thinking it was that old(turns out it was 7 years old) and there was a lot of weird things that would go on with that machine. There were sporadic issues with applications having DLL errors when a few months prior they worked without issue. Windows update could not complete an update on the machine. It would download, install, then during the reboot when it was finishing the update it would fail and roll back. I was about to reinstall Windows on the machine thinking it was just something corrupted causing the issues and decided to swap the PSU and all the issues went away. Luckily the first PSU was under warranty and I got it swapped out and I just keep it as a spare.
|
|
# ? Apr 20, 2024 23:30 |
|
SpartanIvy posted:I doubt it's dust related because I dusted my computer a few months ago so it's fairly good at the moment, plus my GPU is encased in a block, so it's unlikely dust would find a way in. Have you monitored the temperatures while/after benchmarking? Sam,e for the voltage draw etc (GPUZ sensor page is a quick easy way to see) Way back I had sporadic artifacts and black blocks on screen and it was, iirc, either the memory or the chip hot-spot spiking really high, but only occasionally. Not consistent with the load particularly, sort of semi random. Intermittent faults like this are a total pain in the arse to deal with, you have my sympathy
|
# ? Apr 21, 2024 00:02 |
|
Canned Sunshine posted:Sounds like EK is rapidly circling the toilet: sadly i'm not surprised
|
# ? Apr 21, 2024 02:18 |
|
YerDa Zabam posted:Have you monitored the temperatures while/after benchmarking? Sam,e for the voltage draw etc (GPUZ sensor page is a quick easy way to see) I resolved similar intermittent failure issues by tearing down and repasting/repadding my card. Turns out my refurb got the cheapest pads possible and they missed coverage on some VRMS. Applied some cryonaut paste and pads ~four years ago and my card has been golden ever since, not a single GPU stress related crash.
|
# ? Apr 21, 2024 03:42 |
|
tehinternet posted:As much as I love Fractal Design cases, if I’m ever going SFF, it’s going to be a dumbass awesome gimmick like a computer in a toaster or a NES. Surely you can find some beige Commodore 64 looking case and have a computer that looks like a keyboard
|
# ? Apr 21, 2024 08:50 |
|
Bofast posted:Surely you can find some beige Commodore 64 looking case and have a computer that looks like a keyboard 8bit Do have followed up their NES-alike with this C64-ish one, so you could have a keyboard that looks like a computer. Not much room (any room) in there for components beyond a small SBC though, but I guess you could maybe cram something into one of their old 5 1/4" HDD units. Haha, actually some of those buttons an knobs along the top look very like the turbo buttons of olde They are a bit too "novel" for my sophisticated discerning classy taste, but supposedly they are actually pretty good YerDa Zabam fucked around with this message at 09:15 on Apr 21, 2024 |
# ? Apr 21, 2024 09:08 |
|
Infamously the 1541 basically was its own computer, so making a SFF build in the shell of one would be very appropriate.
|
# ? Apr 21, 2024 14:21 |
|
YerDa Zabam posted:Have you monitored the temperatures while/after benchmarking? Sam,e for the voltage draw etc (GPUZ sensor page is a quick easy way to see) I have tried monitoring with GPUZ, Afterburner, HWInfo. Nothing I can find looks suspicious. I also installed a fresh copy of Windows 11 on a spare SSD and tried the test and it still fails, so doubtful it's a software issue at this point. tehinternet posted:I resolved similar intermittent failure issues by tearing down and repasting/repadding my card. Turns out my refurb got the cheapest pads possible and they missed coverage on some VRMS. Applied some cryonaut paste and pads ~four years ago and my card has been golden ever since, not a single GPU stress related crash. I think this must be my next step. Anyone have any recommendations for thermal pads? I need 1.0mm thick ones. Through googling, I saw a few people mention Gelids.
|
# ? Apr 21, 2024 21:23 |
|
SpartanIvy posted:I think this must be my next step. Anyone have any recommendations for thermal pads? I need 1.0mm thick ones. Through googling, I saw a few people mention Gelids. Tech Jesus mentioned Thermal Grizzly a lot and he seems to be zealous about min-maxing price:quality. They worked for me.
|
# ? Apr 21, 2024 21:32 |
|
tehinternet posted:Tech Jesus mentioned Thermal Grizzly a lot i mean they are a frequent sponsor
|
# ? Apr 21, 2024 22:14 |
|
SpartanIvy posted:I have tried monitoring with GPUZ, Afterburner, HWInfo. Nothing I can find looks suspicious. If the temps are fine throughout then I fear that new thermal pads (or re-pasting) will not help. Those really only help reduce temperature but it seems that it is fine in that respect? Don't want to be a doomer sorry, and by all means have at it if you feel like it, it won't do any harm. Plenty of times I've stripped down and reassembled something and it has just worked fine after for no discernible reason. Sounds more and more like actual hardware failing sadly. You might need to send it to someone who repairs GPUs and the like. It might just need the VRMs repaired, something to do with the video output or maybe fully BGA repaired on the GPU or memory. I used to do work like this for phones and tablets but never got the full sized GPU machine. Depending on the resale value of the card and the costs to get it done where you live it might be worth it. I hope it isn't that of course. YerDa Zabam fucked around with this message at 23:14 on Apr 21, 2024 |
# ? Apr 21, 2024 23:10 |
|
Craptacular! posted:I'd strive to have a computer that looks like that these days except that they all need to be windtunnels to cool the components these days.
|
# ? Apr 22, 2024 00:50 |
|
So I’m pretty sure it’s a big fat no but I need to double check because some YouTube videos show different. I’m trying to use AMD FMF on diablo 4 which is only full screen window game. It absolutely won’t work right? It has to be a game that’s full screen exclusive mode correct?
|
# ? Apr 22, 2024 01:36 |
|
YerDa Zabam posted:8bit Do have followed up their NES-alike with this C64-ish one, so you could have a keyboard that looks like a computer. Well, there is the C64 shell that My Retro Computer in the UK seems to be selling still.
|
# ? Apr 23, 2024 16:27 |
|
|
# ? May 6, 2024 02:46 |
|
The state of eGPUs is interesting - I’ve ordered a handheld gaming PC and a companion travel sized eGPU which has a mobile 7600XT. Apparently the current “standard” connection port is oculink and the cables have a very limited plug/unplug Iifespan. The tradeoff is oculink is significantly faster than USB4/TB
|
# ? Apr 24, 2024 13:47 |