|
NoneMoreNegative posted:I was inspired! Should be here from the printers on Saturday. Can you sell this through Aliexpress so I can receive it in 9 months in the wrong size.
|
#
?
Aug 21, 2019 20:29
|
|
|
|
| # ? Jun 12, 2024 02:55 |
|
|
NoneMoreNegative posted:I was inspired! Should be here from the printers on Saturday. Lol
|
|
#
?
Aug 21, 2019 20:38
|
|
|
I'm not reading 300 pages of this thread so apologies if this has been posted already, but if you're into 3D Printers, AliExpress, Banggood, and the like are a god send for turning would would be a multi-thousand dollar hobby into a mere two to three hundred. This is because practically everything from the printers themselves, to the individual parts and accessories like build plates and auto bed levellers is an almost direct copy of the real deal good stuff. Here are a few examples: This is the Prusa Mk.3 i3S. It is widely considered one of the best FDM hobbyist printers around. Completely hand built, with high quality components it gives fantastic results for the relatively low cost of $999 (fully assembled) or $750 (DIY Kit)  If you don't want to drop a cool grand to get started 3D printing then have no fear because this is the Creality Ender 3 an almost direct knockoff of the Prusa, but without all of those fancy toys like "Quality Components", "a build plate that's not warped", or "Thermal Runaway Protection". It comes only as a DIY kit, which you won't be able to complete until you 3D print a critical mounting bracket for the Z axis screw. But for only $250, it's hard to complain.  This is the BLTouch an auto bed leveling sensor for 3D printers invented, designed, developed and patented by a S.Korean University Student. Extremely accurate, small and lightweight, it's a must have for people whose printers have warped over time (it will correct the warping and ensure your print comes out properly).  But what if the $50 price tag for a BLTouch is 1/5th the price you paid for the actual printer? Well don't worry, because you can always get the 3D Touch for $18. If you get lucky, you might even get one that works! 
|
|
#
?
Aug 21, 2019 21:27
|
|
|
theflyingexecutive posted:“I’m not a coke addict I swear! Check this out” i mean. if they’re a casual, maybe. real winter sports pros hit the slopes with slightly different aliexpress purchases https://m.aliexpress.com/item/32947...mA1566419316580
|
|
#
?
Aug 21, 2019 21:35
|
|
|
Alternatively: https://www.aliexpress.com/item/32947860948.html
|
|
#
?
Aug 21, 2019 22:28
|
|
|
that's goddamn hilarious, if a cop stopped you doing coke and you pulled that thing out, they'd have to let you go.
|
|
#
?
Aug 21, 2019 23:01
|
|
|
Lmao
|
|
#
?
Aug 21, 2019 23:01
|
|
|
NMN i'm serious, please sell us that lovejoy shirt
|
|
#
?
Aug 21, 2019 23:10
|
|
|
Every single one of these is great
|
|
#
?
Aug 21, 2019 23:17
|
|
|
queserasera posted:So when are these going on sale? bad posts ahead!!! posted:NMN i'm serious, please sell us that lovejoy shirt lol I'm not about to set up an online store or anything effort-wise; here's the high-res image I used for my print uploaded to my Dropbox, should be available to download if you click the 'three dots' [...] button to get the download option: https://www.dropbox.com/s/fbypgflmfyttzd5/lovejoydivision.zip?dl=0 I use https://www.streetshirts.co.uk/design-your-own-t-shirts to get my designs printed, and whatever process they use it's good and long-lasting. Looking at about Ł15 shipped in the UK for the 'Mens Heavyweight Tee' which is a good thickness material, the lightweight tees they have are a bit flimsy. That do ship worldwide if you're not a Brit, but extra shipping costs - you might find a local-to-you online print shop cheaper.  Pls post a selfie wearing your new shirt if you get one made. NoneMoreNegative fucked around with this message at 23:24 on Aug 21, 2019 |
|
#
?
Aug 21, 2019 23:19
|
|
|
Ambrose Burnside posted:i mean. if they’re a casual, maybe. real winter sports pros hit the slopes with slightly different aliexpress purchases  bullet points in the listing.
|
|
#
?
Aug 21, 2019 23:21
|
|
|
There used to be a thread of 70s magazine ads for coke accessories, and this was definitely one of them. Some amazing stuff amongst it, I wonder if they all got repro'd by the Chinese so many years later.
|
|
#
?
Aug 21, 2019 23:23
|
|
|
these do own and if u wanna buy from steven rhodes he has a threadless store that is probably more reliable to ship from and the material is guaranteed to not require biohazard stickers on the packaging https://stevenrhodes.threadless.com/
|
|
#
?
Aug 22, 2019 00:36
|
|
|
Yeah I have a legitimate Let's Summon Demons shirt in black and it's comfy as hell
|
|
#
?
Aug 22, 2019 00:48
|
|
|
thanks nmn!
|
|
#
?
Aug 22, 2019 01:50
|
|
|
NoneMoreNegative posted:Pls post a selfie wearing your new shirt if you get one made. So tempted.
|
|
#
?
Aug 22, 2019 03:29
|
|
|
EL BROMANCE posted:There used to be a thread of 70s magazine ads for coke accessories, and this was definitely one of them. Some amazing stuff amongst it, I wonder if they all got repro'd by the Chinese so many years later. Unfortunately that’s the only one from that thread I could find.
|
|
#
?
Aug 22, 2019 03:40
|
|
|
Any TIME TO gently caress watches?
|
|
#
?
Aug 22, 2019 03:52
|
|
|
No, just TIME TO gently caress witches.
|
|
#
?
Aug 22, 2019 05:59
|
|
|
Killingyouguy! posted:Yeah I have a legitimate Let's Summon Demons shirt in black and it's comfy as hell Oh, poo poo, I have that one, too!
|
|
#
?
Aug 22, 2019 07:20
|
|
|
MustardFacial posted:I'm not reading 300 pages of this thread so apologies if this has been posted already, but if you're into 3D Printers, AliExpress, Banggood, and the like are a god send for turning would would be a multi-thousand dollar hobby into a mere two to three hundred. This is because practically everything from the printers themselves, to the individual parts and accessories like build plates and auto bed levellers is an almost direct copy of the real deal good stuff. Here are a few examples: I have two essentially similar style printers from over the years. I was tempted on the Ender but ended up buying two Anycubic Kossel Linear Plus' - they are Delta style and look and sound amazing printing away. I've got some really good prints out of them and they are just workhorses to the point where I tore the build plate material up. Bonus is they have a self leveling module included in the box. Then I got the Ultrabases and not more tape/glue to hold down pieces as they print. Once it cools, parts just pop off with no effort or scraping.
|
|
#
?
Aug 22, 2019 09:29
|
|
|
My shirts have arrived:  
|
|
#
?
Aug 22, 2019 11:17
|
|
|
ACAB one owns
|
|
#
?
Aug 22, 2019 11:51
|
|
|
I ordered two of the tall glasses from here: https://www.aliexpress.com/item/32875412432.html?spm=a2g0s.12269583.0.0.65467533el8XrC  They arrived quite quickly and look really nice. Surprisingly light, too.
|
|
#
?
Aug 22, 2019 13:06
|
|
|
I got one of these on eBay and it turbofucked my recommendations for a while
|
|
#
?
Aug 22, 2019 13:44
|
|
|
Some more good stuff: Buying any jewelry on Ali? You'll need something to store it on:  A good, cheap lint roller:  I loved these head massager things when I was younger, but could never justify buying one. Welp! 67 cents!  Fun phone cases:   My pots and pans have metal handles, so these are helpful:   A Godzilla pin:  Thin wallet that works well: 
|
|
#
?
Aug 22, 2019 15:46
|
|
|
Gambit from the X-Men posted:Police only use the internet to join racist Facebook groups and plan Klan rallies Any chance of tossing up a link to the shirt? I'm not having any luck finding it on my own
|
|
#
?
Aug 22, 2019 16:25
|
|
|
Here ya go: I also got the other shirts from this store, except the gay space communism one.
|
|
#
?
Aug 22, 2019 16:33
|
|
|
Xaintrailles posted:That page is glorious.  By popular demand posted:Here ya go: Thanks
|
|
#
?
Aug 22, 2019 17:01
|
|
|
Humphreys posted:I have two essentially similar style printers from over the years. I was tempted on the Ender but ended up buying two Anycubic Kossel Linear Plus' - they are Delta style and look and sound amazing printing away. I've got some really good prints out of them and they are just workhorses to the point where I tore the build plate material up. Bonus is they have a self leveling module included in the box. What made you choose the Anycubic over the Ender? At this point I've upgraded almost everything in my Ender to higher grade components (stepper motor drivers, 32-bit mainboard, bowden tube, extruder, firmware, BLTouch) and fixed every fire hazard the thing has and I've only spend an extra ~$75. The end result is an amazing printer on par with any of the professional ones for just under $350 total. My Ender also came with a knockoff Anycubic Ultrabase, and I agree they're really good for holding everything down. At most I'll give them a light hairspray coat every now and then.
|
|
#
?
Aug 22, 2019 22:59
|
|
|
theflyingexecutive posted:I got one of these on eBay and it turbofucked my recommendations for a while  why is it smoking?
|
|
#
?
Aug 22, 2019 23:09
|
|
|
I wonder why my package is taking so long to get here. ...oh
|
|
#
?
Aug 22, 2019 23:09
|
|
|
There’s a shipping forum where people comment on each other’s tracking info? E- missed a letter Snowy fucked around with this message at 01:00 on Aug 23, 2019 |
|
#
?
Aug 23, 2019 00:32
|
|
|
Are they not aware of the political climate in HK rn?
|
|
#
?
Aug 23, 2019 00:55
|
|
|
McSpergin posted:Are they not aware of the political climate in HK rn? Exactly. They aren't watching the news and REALLY need their hoover-shaped coke snooter.
|
|
#
?
Aug 23, 2019 01:20
|
|
|
Snowy posted:There’s a shipping forum where people comment on each other’s tracking info? About half the users are really confused fanfic writers
|
|
#
?
Aug 23, 2019 01:21
|
|
|
I want some of these awesome pins in fridge magnet form. Anyone found any cool or funny fridge magnets? The ones in the search results are all bland gift shop stuff. Edit: found something that expresses my existential ennui and also my love of carbs.  https://www.aliexpress.com/item/32960646388.html who's your crawdaddy fucked around with this message at 03:07 on Aug 23, 2019 |
|
#
?
Aug 23, 2019 03:00
|
|
|
I, too, am in the frog go zoom pin club.
|
|
#
?
Aug 23, 2019 03:34
|
|
|
MustardFacial posted:What made you choose the Anycubic over the Ender? At this point I've upgraded almost everything in my Ender to higher grade components (stepper motor drivers, 32-bit mainboard, bowden tube, extruder, firmware, BLTouch) and fixed every fire hazard the thing has and I've only spend an extra ~$75. The end result is an amazing printer on par with any of the professional ones for just under $350 total. Simply because a few friends of mine have Enders and it seemed an endless game of tweaking for them. I was paid by a bloke to build his Kossels because he is dumb and wired everythign wrong on his first one. After getting it going I did some test prints and was really happy with even the stock firmware. One gotchya though is the firmware - sometimes it's corrupt and won't save Z calibrations. Marlin fixes that and its brilliant. The Ultrabase sealed it as my favourite. I trust them so much I bought two.
|
|
#
?
Aug 23, 2019 08:52
|
|
|
|
| # ? Jun 12, 2024 02:55 |
|
|
Snowy posted:There’s a shipping forum where people comment on each other’s tracking info? Yeah, although It seems carrier dependent, and not per-package thankfully. foonykins posted:Exactly. They aren't watching the news and REALLY need their hoover-shaped coke snooter.
|
|
#
?
Aug 23, 2019 08:53
|
|