|
n8r posted:Just takes once. Agreed. It could happen. I ran GP shift previously for a while and getting acquainted with it wasn't hard. It was having one bike GP shift and another normal I found so dangerous. I was actually having a few problems on the track needed to shift at certain lean angles and not being able to with a regular pattern and was going to give it a try. This just forced my hand. Nothing for it but to be careful and try not to gently caress up.
|
# ? May 12, 2013 06:25 |
|
|
# ? Jun 3, 2024 22:11 |
|
Spiffness posted:Agreed. It could happen. I ran GP shift previously for a while and getting acquainted with it wasn't hard. It was having one bike GP shift and another normal I found so dangerous. Quite a few racers run standard shift and I assure you they are far faster than you.
|
# ? May 12, 2013 14:39 |
|
n8r posted:Quite a few racers run standard shift and I assure you they are far faster than you. No poo poo. You can probably get a few more posts out of this, run with it yo.
|
# ? May 12, 2013 16:53 |
|
i know quite a few CMRA experts that run standard, dudes are faaaast. the only reason my bike is GP is because that's how i bought it race bike pic and fun fact: dude in the background is Brandon Cleland, local expert and AMA racer. he rides a daytona 675 for RSracecraft. and in other news, i missed the 2nd 'Dirt Wars' held at Colin's Tornado Boot Camp. stupid work. 2 of my teammates did go and race, they managed a few 2nd 3rd and 4th places. gonna try to make the next installment.
|
# ? May 12, 2013 19:08 |
|
Spiffness posted:No poo poo. Aside from the whole blowing up your motor having to remember to shift differently on a race bike than any other bike you own seems silly. You're going to always have to be just a little aware of shifting the bike properly. Just adjust your shift points or gearing if it's really an issue.
|
# ? May 12, 2013 21:21 |
|
so for the longest time, our friend Dave was the fastest guy we knew that didn't race. he got his race license at the end of last season. he's podium'd multiple times every race weekend thus far. he also has the stupidest lean angle out of anyone i know (he's a tall and older dude as well). oh, and here are his sons following in his footsteps.
|
# ? May 13, 2013 05:01 |
|
I'm signed up for and confirmed for 5/31 with Zoom Zoom at THill and 6/22-23 with Keigwins, also at THill. Come play at the track! Dunno about space for extra bikes, but might be able to figure something out.
|
# ? May 16, 2013 06:30 |
|
Headed to Napa Speedway in Albuquerque tomorrow for my first track day. Excited and nervous at the same time but should be fun. Anyway if anybody here is there tomorrow look for the guy with the black daytona and say hi!
|
# ? May 17, 2013 20:39 |
|
So, I'm picking up a ZZR600 on Sunday (hopefully), and seeing how I need to get new rubber for it anyway, would would a good choice be for the road and for my first track days? Something I can use for both initially would be pretty great, I don't expect to be pushing hard enough to murder the tyre any time soon. e: How will a ZZR600 go at a track day by the way?
|
# ? May 18, 2013 03:21 |
|
Any "standard" sport rubber would be fine. Pilot Power (original or 2ct), Q2, BT016, etc. A friend of mine can run close to slow A times on a VFR, a ZZR is perfectly fine for trackdays. A ZZR is basically just a rebadged older gen ZX6-R anyway, depending on the year.
|
# ? May 18, 2013 03:38 |
|
Shimrod posted:So, I'm picking up a ZZR600 on Sunday (hopefully), and seeing how I need to get new rubber for it anyway, would would a good choice be for the road and for my first track days? Something I can use for both initially would be pretty great, I don't expect to be pushing hard enough to murder the tyre any time soon. What year? I did my first few trackdays on a first gen one (dual exhausts stock). Good bikes but they need help in the suspension department. If you bought a 93-05 model I could potentially have some suspension for you.
|
# ? May 18, 2013 07:00 |
|
Z3n posted:What year? I did my first few trackdays on a first gen one (dual exhausts stock). Good bikes but they need help in the suspension department. If you bought a 93-05 model I could potentially have some suspension for you. 1993, I've read about the suspension and will be getting some stiffer stuff before I track it, I'm in Australia though so I don't think it'd be very economical to ship it to me (although I'd definetally consider it depending on prices over here - which are usually ridiculous).
|
# ? May 18, 2013 07:52 |
|
Mhmmmm R6 brembo master on my GSXR. also, tomorrow Fastline will be hosting a trackday at MSR Houston, in conjunction with the annual motohouston.com BBQ. if you're in the Houston area and wanna ride down to hang out or say hi, do it!
|
# ? May 25, 2013 19:37 |
|
Ha, is that a "GP SHIFT" label to remind yourself not to wreck yourself?
|
# ? May 25, 2013 20:12 |
|
epalm posted:Ha, is that a "GP SHIFT" label to remind yourself not to wreck yourself? GP shift, or standard shift sticker is required to pass race tech. if you don't have one already on there, they'll stick one on. dunno about other clubs, but we need it for CMRA.
|
# ? May 25, 2013 20:33 |
|
WERA has the same rule.
|
# ? May 25, 2013 21:16 |
|
I wonder if AFM does that now too...will need to look into the rules. Not a bad idea for the cornerworkers who are trying to roll the bike...
|
# ? May 25, 2013 23:04 |
|
Z3n posted:I wonder if AFM does that now too...will need to look into the rules. Not a bad idea for the cornerworkers who are trying to roll the bike... i wanna say that's the reason why. i'll ask at the next race weekend.
|
# ? May 27, 2013 04:15 |
|
What's the difference between GP shift and normal shift? e: more to the point, why would it be important for the corner workers?
|
# ? May 27, 2013 04:33 |
|
Shimrod posted:What's the difference between GP shift and normal shift? GP Shift is just reversing your shifter linkage, so to upshift you press DOWN on the shifter, and to downshift you press UP on the shifter. The idea is that when you're banked over in a left turn, and need to upshift, it's easier to click down than to try sneaking your toe under the shifter. I'm guessing it's important for the corner workers to know so they can easily put your bike into neutral.
|
# ? May 27, 2013 05:16 |
|
GP Shift reverses the up-down shift pattern so you can upshift while leaned over without dragging your foot? I think Probably helps corner guys go the right way to neutral. E: f,b
|
# ? May 27, 2013 05:17 |
|
Oh, so it just makes it like an old british bike then.
|
# ? May 27, 2013 08:20 |
|
GP shift combined with a quickshifter is totally bitching. the only reason is have all these goodies on my bike is because i bought it that way. the bad part is, i can't go back to stock or crap components, like ever. if i ever get another bike its gonna have to have ohlins and all the other stuff i've gotten so used to.
|
# ? May 27, 2013 16:56 |
|
Veritas posted:GP shift combined with a quickshifter is totally bitching. the only reason is have all these goodies on my bike is because i bought it that way. the bad part is, i can't go back to stock or crap components, like ever. if i ever get another bike its gonna have to have ohlins and all the other stuff i've gotten so used to. Is there a high-five emoticon where they slowly realize they're hosed and get kind of sad? If so, you and me pal. Quickshifters are awesome and GP shift is awesome too (if you can adapt to that kind of thing without too much trouble).
|
# ? May 27, 2013 17:01 |
|
we can just call it :sadfive: so we had a trackday yesterday at MSRH Houston. i rode a ton, i'm completely drained. i was instructing novice group so i did all but one of the novice sessions, rode some of the intermediate sessions, and went to play and turn some hot laps in the advanced sessions. had a really good session where i was getting towed by a friend that is faster. little by little he got me out of my comfort zone, and it felt awesome. like the bike and i were finally 'gellin'. that hadn't happened in a while. so overall, it was a great, super hot day (Houston) at the track.
|
# ? May 27, 2013 17:28 |
|
There we go. Z3n fucked around with this message at 18:39 on May 27, 2013 |
# ? May 27, 2013 18:36 |
|
That's awesome. My track day was rain canceled at Heartland Park Topeka.
xaarman fucked around with this message at 02:15 on May 28, 2013 |
# ? May 28, 2013 02:09 |
|
First trackday in 2 years tomorrow.
|
# ? May 30, 2013 19:48 |
|
track track track!
|
# ? May 30, 2013 23:05 |
|
Then I have until tomorrow to say that I've been to the track more often than you for the last year, and, therefore, I am better. edit: Today
|
# ? May 31, 2013 13:43 |
|
gixxah powwah!
|
# ? Jun 1, 2013 00:08 |
|
I'm looking into my first trackday this summer. Are pilot road 3s a terrible idea for this? I feel like a competent but terrible rider. My rear tire will probably need to be replaced within the month so I have the opportunity to get something softer but the front probably has another season in it. I don't commute on the bike as often as I used to but I do a reasonable amount of long distance riding so the harder compound in the center is nice. I'm not good enough to notice the limits of the tires but I don't know if that'll change on the track. Bike is (of course) an sv650. Advice?
|
# ? Jun 1, 2013 01:37 |
|
bsamu posted:I'm looking into my first trackday this summer. Are pilot road 3s a terrible idea for this? I feel like a competent but terrible rider. My rear tire will probably need to be replaced within the month so I have the opportunity to get something softer but the front probably has another season in it. I don't commute on the bike as often as I used to but I do a reasonable amount of long distance riding so the harder compound in the center is nice. I'm not good enough to notice the limits of the tires but I don't know if that'll change on the track. Bike is (of course) an sv650. Not a tire expert or anything, but pretty sure for your first day you'll be fine. Edit - have a buddy who is an instructor for a local org and he ran pilot road 2s on his sv650 at one point or another I believe. No issues. GanjamonII fucked around with this message at 03:24 on Jun 1, 2013 |
# ? Jun 1, 2013 03:16 |
|
I can't imagine you're going to be getting on the throttle early enough in corners to be outriding PRs on your first trackday. If they start getting loose on corner exit then that's your early warning.
|
# ? Jun 1, 2013 05:02 |
|
Yeah it's just extra important to pay attention to the warning signs on street tires. If they start feeling greasy, back off. So, first trackday in 2 years. I can still ride a bike at speed on a track, that is nice. Managed to run pretty consistent 2:10s, so around 5 seconds below A group cutoff and 8 seconds off my personal bests on the SV. I should have just dove in and run A group off the bat, B was a clusterfuck. But with inside and outside passing available, it made for some decent footage...will upload when I get home. Had a few good battles with some literbikes, the 675 is a very nice chassis to build on, considering that I haven't gone fast enough to start pushing the limits yet. I thrashed an SC1 takeoff in a single day, modern softs are insanely soft. If I wasnt getting sc1 takeoffs so cheap, it wouldnt be worth it to run them. Suspension worked out nicely, probably going to do a thunderhill race round towards the end of the year. Shooting for 2:05s or quicker on my next trackday. Next trackday is june 22/23. Who wants to come out and play?
|
# ? Jun 1, 2013 05:33 |
|
drat, sounds like you had a blast! I might be able to join you on the NEXT next one.
|
# ? Jun 1, 2013 08:19 |
|
i think i run the pirelli medium compounds. i kinda wanna try the soft, but i don't like buying race tires all the time. now that i think about about it, i think i run a soft front.
|
# ? Jun 1, 2013 16:07 |
|
Questions for you more experienced track day guys: 1) Any tips on how to pass better? I'm still paranoid about the dude in front of me, and overall just not comfortable with it. I'm on an SV650 so I can't outpower them (and they go WOT in the straights.) I've pulled off a few times to build spacing, but just looking for tips on how to get more comfortable passing on a (comparatively) underpowered bike. 2) This new track charges 25/day for transponders, the ones published on mylaps.com. I've seen racing organizations sell them, are they universal or do they have to be coded to the beacon used at the track?
|
# ? Jun 4, 2013 00:05 |
|
For passing, wait a couple corners and get a feel for how well they hold their line, how much of the track they're using, if they tend to cut in late/early or stay tight/run wide on exits, stuff like that, and you'll see a pattern with most people. Once you get that down, it's not too hard to pre-plan a pass and give it the beans the second a spot opens up, thereby freeing you of the "should I pass here..hmm...well I would've had enough time had I just done it" thought process. edit: And I've never used a transponder, but I assume it's just something like input this code from the beacon into your bike unit or whathaveyou. I know people that use their own transponders with the beacon at my local track, so I'm guessing they're universal. AncientTV fucked around with this message at 00:10 on Jun 4, 2013 |
# ? Jun 4, 2013 00:08 |
|
|
# ? Jun 3, 2024 22:11 |
|
i'll echo what AncientTV said, follow them and see what they ride like. if they're riding the line and being predictable, set them up for pass, preferably not in a corner. since you're on an SV, your best bet might to pass them on the brake before you both start tipping in for the corner. if you can't make the pass beforehand, set them up for the pass on corner exit. if you have to think for more than a second about wether or not you should make a pass, don't. it's a trackday and not a race, not worth going down because another rider is being erratic or whatever. it's good that you're hot pitting and letting room build up.
|
# ? Jun 4, 2013 01:17 |