|
The Grammar Aryan posted:I did what was effectively T2 QA for a small game development company for a few years. Players noticed an occasionally-reproducible bug, something minor but noticeable. I tail the logs, start trying to repro, and then the phrase "gently caress, I don't know, something went wrong" pops up into my terminal. It turns out there was a race condition that was triggering reproduced code (lazy programmers!) which triggered a failure fallback that should never have been able to happen (the one good programmer!). ew At least the Code Purple was well documented. It was a thing with HP Desktops that failed some hardware checksum to make sure you were installing the image on the actual computer it was supposed to be. Turns out that desktop had it's motherboard replaced several months before, and the guy who replaced it (under warranty) used a refurbished, non OEM part. I'm assuming it was intentionally ambiguous to hide it's actual meaning, which was completely defeated by 30 seconds on Google.
|
# ? Sep 20, 2016 17:22 |
|
|
# ? May 15, 2024 02:56 |
|
GnarlyCharlie4u posted:orange-white, orange. green-n-white, blue. blue-n-white, green. brownin-white, brown. Many years ago I had a team tasked with something nearly impossible, we had to terminate 32 fully populated patch panels, and make all of the panel to switch and panel to <gear> cables, in a weekend. At one point there were 4 of us making cables at the same time, singing that color pattern like a funeral dirge. It went on for hours like that. 40 years from now when Alzheimer's gets me, I'll still remember how to make a cable.
|
# ? Sep 20, 2016 17:46 |
|
Next year we're replacing our core switch and the boss man wants us to re-cable everything. Currently 10 stacks of 48-port blades.
|
# ? Sep 20, 2016 17:46 |
|
GreenNight posted:Next year we're replacing our core switch and the boss man wants us to re-cable everything. Currently 10 stacks of 48-port blades. Don't make your own cables. Don't make your own cables. Don't make your own cables. Don't make your own cables.
|
# ? Sep 20, 2016 17:52 |
|
DigitalMocking posted:Don't make your own cables. Buy hundreds of each length of cable, use what you need, return the rest if your company is super cheap (and if you're able), or keep the rest for spares.
|
# ? Sep 20, 2016 17:53 |
|
DigitalMocking posted:Don't make your own cables. Never would I ever. We're too smart for that. If we're spending 100k+ on a new switch we can buy new cables too.
|
# ? Sep 20, 2016 17:53 |
|
DigitalMocking posted:Don't make your own cables. Orrrrrrrrrr... You could make your own cables. (But please for the love of GOD get stranded cable)
|
# ? Sep 20, 2016 17:54 |
|
SAP is a big piece of poo poo and I hate it
|
# ? Sep 20, 2016 17:59 |
|
From my experience in the audio world, as long as you know your way around a soldering iron and you're not a baby about it, DEFINITELY make your own cables. Again, I'm talking XLR and TRS. In terms of ethernet or other things, yeah, no. I'd just buy them.
|
# ? Sep 20, 2016 18:00 |
|
I don't feel like a proper tech guy because I've never crimped my own cables before. On the other hand, I feel blessed because I've never had to crimp my own cables before. Renegret fucked around with this message at 18:15 on Sep 20, 2016 |
# ? Sep 20, 2016 18:07 |
|
MF_James posted:I'm still waiting for FTP (Fist Through Phone) to be developed so I can strangle/punch idiots I'm on the phone with.
|
# ? Sep 20, 2016 18:17 |
|
Just buy monster cables for everything.
|
# ? Sep 20, 2016 18:20 |
|
Renegret posted:I don't feel like a proper tech guy because I've never crimped my own cables before. I crimped my own cables in college because we were running wiring through our fraternity and paying dudes to do that was expensive, so we bought a giant spool, me and another guy spent a night drinking and crimping cables. It was fine then, because broke college kids, but now? gently caress no.
|
# ? Sep 20, 2016 18:22 |
|
Dr. Arbitrary posted:Just buy monster cables for everything. Yeah why make my own when I can get premium high end *copper* plated super-awesome digitally lossless Monster cables for twenty times what they're worth?
|
# ? Sep 20, 2016 18:23 |
MF_James posted:I crimped my own cables in college because we were running wiring through our fraternity and paying dudes to do that was expensive, so we bought a giant spool, me and another guy spent a night drinking and crimping cables. It was fine then, because broke college kids, but now? gently caress no. Quality certified!
|
|
# ? Sep 20, 2016 18:24 |
|
Data Graham posted:Quality certified! haha yup, the cables all turned out fine except 2-3 of them, and surprise surprise those were the last few we made because by that point I was 20ish beers in because we made a game out of it, if I recall it was finishing a beer before the other guy finished a cable otherwise you had to do the next cable or something like that.
|
# ? Sep 20, 2016 18:27 |
|
Dr. Arbitrary posted:Just buy monster cables for everything. Go bigger, get high-end audiophile cables. The question then is, since Ethernet is directional, do you point them from the network gear out for better user performance, or from the user gear in, for better server performance?!
|
# ? Sep 20, 2016 18:28 |
|
Inspector_666 posted:Go bigger, get high-end audiophile cables. The question then is, since Ethernet is directional, do you point them from the network gear out for better user performance, or from the user gear in, for better server performance?! lol what in the actual gently caress?
|
# ? Sep 20, 2016 18:30 |
|
GnarlyCharlie4u posted:lol what in the actual gently caress? https://www.amazon.com/263-Audioquest-Diamond-Ethernet-Cable/dp/B0073HJVSK
|
# ? Sep 20, 2016 18:35 |
|
Inspector_666 posted:Go bigger, get high-end audiophile cables. The question then is, since Ethernet is directional, do you point them from the network gear out for better user performance, or from the user gear in, for better server performance?! The feng shui of cabling "You'll see that the data transfer rate is higher in the northern room, mostly due to the paint colour of the walls, and the bird bath we have in the corner."
|
# ? Sep 20, 2016 18:35 |
|
Oh I'm aware of how ridiculous audiophiles are. I've dabbled a bit myself. I'm just at directional ethernet.
|
# ? Sep 20, 2016 18:36 |
|
In order to fabricate copper or silver into a strand or conductor, it is first cast and then drawn (squeezed through a die). Even finest high-purity metals have imperfections and grain structure, which due to the direction of casting and drawing become non-symmetrical structures without the conductor. In ways which are not fully understood, both analog and digital audio performance is significantly affected by these non-linearities. While AudioQuest doesn't pretend to fully understawnd this obvious distortion mechanicm, the solution is understood 100%. Use the conductors in the direction which reduces distoration!
|
# ? Sep 20, 2016 18:37 |
|
Judge Schnoopy posted:Yeah why make my own when I can get premium high end *copper* plated super-awesome digitally lossless Monster cables for twenty times what they're worth?
|
# ? Sep 20, 2016 18:43 |
|
DACK FAYDEN posted:I got to tell someone about monoprice.com yesterday Blessings to you. The last time I used monoprice was last year, after we moved. I literally learned if the whole 'Ethernet through power outlets" thing, was blown away by the technology and fact that I'd never heard of it until then, and immediately bought a pair of connectors/receivers/whatever they're called. Still working flawlessly.
|
# ? Sep 20, 2016 19:05 |
|
^-- powerline adapters rock, if I owned the place I live in now, I'd run proper cabling, but gently caress if i'm going to drill through 3 walls to get network connectivity to my office in the back of my apartment.anthonypants posted:In order to fabricate copper or silver into a strand or conductor, it is first cast and then drawn (squeezed through a die). Even finest high-purity metals have imperfections and grain structure, which due to the direction of casting and drawing become non-symmetrical structures without the conductor. In ways which are not fully understood, both analog and digital audio performance is significantly affected by these non-linearities. While AudioQuest doesn't pretend to fully understawnd this obvious distortion mechanicm, the solution is understood 100%. Use the conductors in the direction which reduces distoration! awwww poo poo I found this cable for only $1100 somewhere else, I'm going to corner the loving market by buying all of those and putting mine up on amazon for half the price listed there! Also, did anyone read the amazon reviews? Pretty sure no one has actually bought the cable (obviously with good reason), some of the fake reviews are hilarious. quote:My Mother has cancer and she is not very mobile. She loves surfing the web and reading things. I figured since every second counts for her she needs top speed. Every last millisecond counts. I don't want her waiting an extra millisecond. I noticed absolutely no difference on latency however when mother would set down to the computer the monitor would glow every color in the visible spectrum. When I disconnected Audioquest diamond no glowing.was present. After taking her to the doctor they confirmed the cancer was gone. I will keep this cable around for when the fast food and beer catch up to me.
|
# ? Sep 20, 2016 19:06 |
|
ConfusedUs posted:Error messages are hard. You have to know your target audience inside and out to make good ones. You can't say "remote" to non-technical people. Every time I ask to remote onto someone's computer, I then say "I want to come on your computer" and they go "ah yes, that, please do!" and then i giggle
|
# ? Sep 20, 2016 19:21 |
|
AudioQuest will happily authenticate your audio cable is a Genuine™ AudioQuest cable if you mail it to them for a look-see. If it's real, they mail it back to you. Fake ? They toss it into a shredder and (insert Willy Wonka "YOU GET NOTHING! GOOD DAY SIR!" meme picture here) It's like a Catch-22. If it's real, you deprived yourself of the cable for a week or so. If it's fake, you no longer have a cable to maybe try and return to wherever the hell you got it from .
|
# ? Sep 20, 2016 19:25 |
|
DigitalMocking posted:Don't make your own cables.
|
# ? Sep 20, 2016 19:26 |
|
Thanks Ants posted:
Now for someone (preferably with talent) to rewrite Dio's "Don't Talk To Strangers". "Don't make your cables" even scans nicely.
|
# ? Sep 20, 2016 19:31 |
|
MREBoy posted:AudioQuest will happily authenticate your audio cable is a Genuine™ AudioQuest cable if you mail it to them for a look-see. If it's real, they mail it back to you. Fake ? They ftfy
|
# ? Sep 20, 2016 19:32 |
|
Zamboni Apocalypse posted:Now for someone (preferably with talent) to rewrite Dio's "Don't Talk To Strangers". Don't make your cables Cause the copper wire will do you harm Don't cut your fingers As you trim it off the reel
|
# ? Sep 20, 2016 20:04 |
|
The silliest thing about all this is that there is actual material science involved in making wires, cables, etc. Different strand materials, insulation materials, etc. are all chosen to give it different properties. I mean, you've got shielded cables, sturdier cables, oxidation-resistant cables, etc. Like, these things matter. It's why you have Cat5, Cat5e, Cat6, etc. It's why running your unshielded audio line over your power strip is stupid. But no, instead of science, "We don't know why it's better but it is! Give us 5 thousand dollars for this magic cable." quote:In order to fabricate copper or silver into a strand or conductor, it is first cast and then drawn (squeezed through a die). Even finest high-purity metals have imperfections and grain structure, which due to the direction of casting and drawing become non-symmetrical structures without the conductor. In ways which are not fully understood, both analog and digital audio performance is significantly affected by these non-linearities. While AudioQuest doesn't pretend to fully understawnd this obvious distortion mechanicm, the solution is understood 100%. Use the conductors in the direction which reduces distoration! I mean, as someone who actually studied material science, this is just hilarious to me. I'm not in the cable industry but I'm pretty sure that after copper cable is drawn, it is annealed, which definitely makes the bulk material isotropic (non-directional, vs. anisotropic, where the property is different depending on which direction you're measuring). "Non-linearities", what even is that. AudioQuest doesn't pretend to fully understand basic material science but somehow they have the solution down pat. I know I'm stating the obvious/preaching to the choir when I say that cable companies (amongst others) are so full of poo poo and prey on stupid to make their money, but man, these people are unbelievable.
|
# ? Sep 20, 2016 20:23 |
|
totalnewbie posted:The silliest thing about all this is that there is actual material science involved in making wires, cables, etc. Different strand materials, insulation materials, etc. are all chosen to give it different properties. I mean, you've got shielded cables, sturdier cables, oxidation-resistant cables, etc. Dude. Man. Bro. Brah. You don't get it. Materials are in harmony with the universe. They, like the universe, flow like a river. Non-linearities are the rocks that create rapids. Man, you don't want to hear the screams of the dying while you are trying to mellow out to some Mark Knopfler, do you? Of course not because then you couldn't flow with the universe. Tune into the universe, man. It'll reward you. We are lucky companies like AudioWhatsits exists to create the most pure and universally harmonious music conduction devices. You should thank them for bringing harmony to you for so cheap.
|
# ? Sep 20, 2016 20:37 |
|
Arsten posted:rocks
|
# ? Sep 20, 2016 20:59 |
|
|
# ? Sep 20, 2016 21:05 |
|
A ticket came in: The owner of the company conferenced me in with a friend of his who said he plugged in the wrong power supply to a hard drive enclosure, and that after trying to power it on, the drive won't spin up even with the right power supply. I'm going to recommend trying a different enclosure in case that got fried, but assuming the drive itself was damaged, do yall have any recommendations for consumer-level Mac hard drive data recovery? As someone who backs up everything I don't want to lose, I have zero experience with this sort of thing.
|
# ? Sep 20, 2016 21:28 |
|
A boss came in. Opens discussion with "I don't want to be a micromanager, and I am not controlling." Literally spends the rest of the hour interjecting, and telling them one by one how each and every single thing should be done. Including, but not limited to, "No you're wrong. It needs to be, <repeats what you said verbatim>" What a lovely life that must be. Edit: I guess that's more of a IT 3.0 thread thing, so here's another one. A ticket came in: Blackberry finally shut off their cloud services today. So all those people who didn't follow the instructions we sent out to enable IMAP emails can't send us tickets telling us that their email doesn't work. GnarlyCharlie4u fucked around with this message at 21:44 on Sep 20, 2016 |
# ? Sep 20, 2016 21:42 |
|
GnarlyCharlie4u posted:So all those people who didn't follow the instructions we sent out to enable IMAP emails can't send us tickets telling us that their email doesn't work. https://www.youtube.com/watch?v=Lz9810Y7ZRw
|
# ? Sep 20, 2016 22:01 |
|
Is the BlackBerry shutdown a region-specific thing? I'm struggling to find anything about it.
|
# ? Sep 20, 2016 22:07 |
|
|
# ? May 15, 2024 02:56 |
|
I had a family member once interview for a management position, it had like 8 rounds of interviews with different levels of management. At each of the first seven rounds, she got asked at least twice how she handled micromanagement. At the last round, she met the director, who didn't ask about micromanagement. She said "So, I guess you're the micromanager. Huh." She did get offered the job, the price wasn't right though.
|
# ? Sep 20, 2016 22:08 |