|
I have recently taken possesion of a garage, it's a single car garage with two swinging doors. It's approximately 17 m² large. Since everyone here agreed that I should turn it into a fancy motorcycle garage/shop, I would appreciate suggestions on things to put in there. Are there some specialty tools you can recommend? Or other useful items? I'd love to hear your ideas!
|
# ? Feb 14, 2021 21:42 |
|
|
# ? May 3, 2024 18:06 |
|
Motorcycles. Are you going to be doing this recreationally or professionally? Are you going to be keeping a car or any other vehicles in there? I ask because if it were me I'd look at getting a lift table so that you can stand and work on stuff at a reasonable height (or roll around on a seat or something). Definitely get a parts cleaner/ washer, there seems to be a lot of stuff on (older) bikes that gets caked in grime. Captain McAllister fucked around with this message at 22:16 on Feb 14, 2021 |
# ? Feb 14, 2021 22:14 |
|
One of those rolling stools.
|
# ? Feb 14, 2021 23:08 |
|
Surround sound. And a TV you can YouTube fix videos on. And a bunch of motorcycles.
|
# ? Feb 14, 2021 23:30 |
|
Definitely a lift so you aren't working on the ground. A heater of some sort, as well as a swamp cooler for summer. IDK you probably need to sprinkle some old engine oil around on the ground to make it official. edit: Oh yeah and it needs a dog.
|
# ? Feb 14, 2021 23:37 |
SEKCobra posted:I have recently taken possesion of a garage, it's a single car garage with two swinging doors. It's approximately 17 m² large. A lift, compressor, press, parts washer, half the garage for shelving, another garage next to it for bike storage.
|
|
# ? Feb 15, 2021 04:27 |
|
Captain McAllister posted:Motorcycles. Just recreational. Car is not going in or there would be no space left for anything but the vehicles. BIG DRYWALL MAN posted:One of those rolling stools. Already is in there Revvik posted:Surround sound. Actually trying to evaluate the humidity in there right now, as it was quite high when I first got it and I am investigating if I have to intervene for it to not become a problem. So household electronics are something to consider later. Coydog posted:Definitely a lift so you aren't working on the ground. A heater of some sort, as well as a swamp cooler for summer. IDK you probably need to sprinkle some old engine oil around on the ground to make it official. Got an electric heater on order to see how well it works, my options are probably just that or a gas furnace. This will also be heavily influenced by the humidity question. Dog would be nice, but I'd probably have to spend more time maintaining the dog. Slavvy posted:A lift, compressor, press, parts washer, half the garage for shelving, another garage next to it for bike storage. Are those part washers self contained? As in, can I run those without a water supply? Because that would be neat, I do have a drain. Unfortunately, another garage isn't an option.
|
# ? Feb 15, 2021 10:57 |
|
The entire snapon catalogue but dont let ANYONE touch it. Not even yourself.
|
# ? Feb 15, 2021 15:29 |
|
BIG DRYWALL MAN posted:The entire snapon catalogue but dont let ANYONE touch it. Not even yourself. Never ever use the good tools, you might need them someday! For reference on heating, I have a 400 square foot garage, walls are insulated at R13, ceiling is about R40, 2 8' doors uninsulated (need to fix this). I run a 5000w electric and it will heat the garage up to 65F in 10 minutes, but it will click on every few minutes to maintain temp. This is when the ambient is around 30F. I have too much heat going out the door, make sure you have good garage doors and seals.
|
# ? Feb 15, 2021 15:35 |
|
make sure you have this sticker / patch so folks know you're official
|
# ? Feb 15, 2021 16:02 |
|
Gorson posted:Never ever use the good tools, you might need them someday! I have no insulation except for ceiling, it's an old apartment building garage. I am considering adding insulation, but it's my least favorite option so far. right arm posted:
I ron't think I can convince myself of that and no one else would see it. But I did order a nice Honda flag because the logo id kinda cool and I am a fan of my bike at least.
|
# ? Feb 15, 2021 16:41 |
|
https://www.harborfreight.com/1000-lb-steel-motorcycle-lift-68892.html
|
# ? Feb 15, 2021 16:47 |
|
lift
|
# ? Feb 15, 2021 18:28 |
SEKCobra posted:Are those part washers self contained? As in, can I run those without a water supply? Because that would be neat, I do have a drain. Unfortunately, another garage isn't an option. The manual kind I'm used to are self contained yeah. It's like a school desk half filled with solvent, with just a little pump in the corner and a flexible nozzle it pisses out of. You just need electricity and like 40L of parts wash solvent; the stuff itself stays good for like six months of full time use so you'll never use it up.
|
|
# ? Feb 15, 2021 18:49 |
|
Slavvy posted:The manual kind I'm used to are self contained yeah. It's like a school desk half filled with solvent, with just a little pump in the corner and a flexible nozzle it pisses out of. You just need electricity and like 40L of parts wash solvent; the stuff itself stays good for like six months of full time use so you'll never use it up. Huh, thats quite interesting, it's just weird that I have never heard of this before. What would I use this for? Engine maintenance? Or are there more 'basic' tasks that this is useful for? Just can't think of any parts I'd tear down and need to extensively wash right now.
|
# ? Feb 15, 2021 19:09 |
One day you'll have to do an oil change or something that involves cleaning a separate piece, like the oil filter cover on cartridge filter or something. So you buy a can of brake cleaner for twenty bucks. Do this five times and you've spent $100 on spray cans, which are both inefficient unto themselves and super inefficient financially. If you have a parts washer and you decide to do your own fork seals for example, you strip the forks and dump them in the parts washer, give them a scrub and everything comes out surgically shiny. Doing the same thing with spray cans results in fork oil everywhere, not very clean forks and a lighter wallet. It just makes sense if you ever plan on working on more than one bike or doing anything remotely serious on your bike, it's a huge labor/time/mess reducer and you can make things look like brand new. Super handy for carbs too.
|
|
# ? Feb 15, 2021 19:22 |
|
what's the hydraulic press for, bearings? this is me being vulnerable and brave
|
# ? Feb 15, 2021 19:29 |
|
GriszledMelkaba posted:what's the hydraulic press for, bearings? this is me being vulnerable and brave This is a safe space for your babby questions. Yes it’s for bearings. I kid. About the babby part at least
|
# ? Feb 15, 2021 19:59 |
|
I'm moving into a house that has an electrified garage this next week so I'm furiously taking notes in this thread crosseyed and open mouthed
|
# ? Feb 15, 2021 20:05 |
|
Slavvy posted:One day you'll have to do an oil change or something that involves cleaning a separate piece, like the oil filter cover on cartridge filter or something. So you buy a can of brake cleaner for twenty bucks. Do this five times and you've spent $100 on spray cans, which are both inefficient unto themselves and super inefficient financially. A very compeling argument, I found a german dealer with a 13l model for 60€, so I'll put that down as an investment for as soon as I'd be cleaning a part the first time. GriszledMelkaba posted:I'm moving into a house that has an electrified garage this next week so I'm furiously taking notes in this thread crosseyed and open mouthed Feel free to hijack and ask your own questions and chime in, I would not mind this being 'babbies first hobby garage'
|
# ? Feb 15, 2021 20:20 |
|
Please consider tiling the floor in an excite bike pattern.
|
# ? Feb 15, 2021 21:25 |
|
some 15+ year old calendars with bikini girls on them an old dirty glass pipe a bunch of paint cans with a pint left in them a nasty denim shirt on a nail a pushbroom
|
# ? Feb 15, 2021 21:32 |
Superbike posters from the nineties, GP posters from the rossi era, a shitload of outdated banners for pirelli, fmf, ngk etc.
|
|
# ? Feb 15, 2021 22:55 |
|
Watch the movie Worlds Fastest Indian and recreate the shed of sheds
|
# ? Feb 15, 2021 23:07 |
|
The goal would be the Allen Millyard shed and the knowhow to improv your way through anything https://www.youtube.com/watch?v=48UL3i6SHJQ
|
# ? Feb 15, 2021 23:32 |
|
Allen has a career as being an aircraft engineer. He spent his life doing this poo poo for real, and the bikes are him doing it for funsies on his time off.
|
# ? Feb 16, 2021 20:43 |
He is one of the only engineers I'd let anywhere near a bike, especially aircraft guys. They tend to have the most big ideas about how things Should Be Done, they're a loving plague.
|
|
# ? Feb 16, 2021 20:55 |
|
HenryJLittlefinger posted:some 15+ year old calendars with bikini girls on them Hose offcuts squirreled away under the racking three different sizes of stepladder that are never where you left them the last time you touched it garbage bin full of dustbane oil soaking pads (this is a legitimate suggestion) pair of tweezers for dealing with the metal shavings invariably picked up by the soaker rags interesting signs from 3-4 jobs ago. bonus points if you cut the sign up ransom-note style and rearrange it into rude words on your toolbox Phy fucked around with this message at 00:47 on Feb 17, 2021 |
# ? Feb 17, 2021 00:42 |
Serious suggestion: one of those wall racks with like a hundred little plastic trays you can remove, for the thousands of miscellaneous screws, nuts and washers, carb parts etc you'll inevitably accumulate.
|
|
# ? Feb 17, 2021 01:58 |
|
Phy posted:Hose offcuts squirreled away under the racking Oooh and three pie pans with used oil eater or kitty litter
|
# ? Feb 17, 2021 04:06 |
|
A good work light and a cheap headtorch
|
# ? Feb 17, 2021 17:15 |
|
I think I'll put a couch in there just because.
|
# ? Feb 17, 2021 18:40 |
|
How about a urinal.
|
# ? Feb 17, 2021 19:21 |
|
I think that's what the parts cleaner is for
|
# ? Feb 17, 2021 21:08 |
|
It's usually varsol in the parts washer, right? The SDS doesn't seem to contraindicate pee, worst that'll happen is you'll dilute your varsol a bit and your bike might smell like a drunk pissed on it Depending on where you live, it might already smell like that (Please do not piss in the parts washer, goons)
|
# ? Feb 17, 2021 21:17 |
|
Does anyone have any recommendations for some kind of drawer storage that isn't a complete piece of poo poo, but also not just "buy a toolbox?" I've had these for storage forever, but they suck and don't hold up very well: Ideally there would be plastic ones that are built a little tougher and with proper rails, but that doesn't seem to exist. I'm just renting my current place so I don't want to drop tons of money on a permanent solution right now. I've been thinking of using what I have in my closet, the Container Store's Elfa line of mesh drawers: Which is still a little pricey, but unless someone has a better idea I may just get some more of those.
|
# ? Feb 17, 2021 22:34 |
MomJeans420 posted:
Two of these side by side is my parts department.
|
|
# ? Feb 17, 2021 22:55 |
|
Dunno how well this works in the US, but I have settled for just buying euroboxes, they are great and will always be available.
|
# ? Feb 18, 2021 08:18 |
|
I'm trying to find something with drawers because I hate moving things around to open them up, although I have a number of boxes that are pretty similar the those.Slavvy posted:Two of these side by side is my parts department. They're cheaper than Milwaukee packout system so I guess container store it is.
|
# ? Feb 18, 2021 19:52 |
|
|
# ? May 3, 2024 18:06 |
|
This thread reminded me that I needed to start digging the foundations for my workshop. Digging is hard.
|
# ? Feb 18, 2021 22:01 |