|
Something like these are my favorite for intermittent wearing (put them on, use the tool, take them off) because they stay put around your neck and you can put them on/off in one quick motion unlike corded earplugs
|
# ? Mar 12, 2023 23:10 |
|
|
# ? May 31, 2024 22:24 |
|
Thank you all for the suggestions
|
# ? Mar 13, 2023 02:27 |
|
BeAuMaN posted:
Was that the 80% off deal for those (ballpark) $6000 telephoto lenses? I was talking to a SD mod and he claimed someone got about 15, resold them all and bought a Tesla. Pinnacle of the craft.
|
# ? Mar 13, 2023 07:35 |
|
Doodarazumas posted:Was that the 80% off deal for those (ballpark) $6000 telephoto lenses? I was talking to a SD mod and he claimed someone got about 15, resold them all and bought a Tesla. Pinnacle of the craft.
|
# ? Mar 13, 2023 07:41 |
|
I feel like this question comes up every couple months, but what’s the name of those punches that correspond to specific drill bits so you can center punch a hole to start drilling with? Hopefully someone can make sense of my lousy description
|
# ? Mar 14, 2023 10:54 |
|
Transfer punches?
|
# ? Mar 14, 2023 11:23 |
|
I thiiink so .. let’s say I want to install cabinet hardware and I have precisely marked where I want the 1/8” hole to be. I select the corresponding 1/8” punch, place the point where I want the center of the hole to be, and set the punch. Is that the intended use case for these transfer punches?
|
# ? Mar 14, 2023 14:01 |
|
No, I think you're talking about self centering drill bits.
|
# ? Mar 14, 2023 14:04 |
|
lil poopendorfer posted:I thiiink so .. let’s say I want to install cabinet hardware and I have precisely marked where I want the 1/8” hole to be. I select the corresponding 1/8” punch, place the point where I want the center of the hole to be, and set the punch. Is that the intended use case for these transfer punches? These are for transferring an existing hole of a specified diameter to an underlying piece of material.
|
# ? Mar 14, 2023 14:44 |
|
I don't know about anything specific to different drill bits, but an automatic center punch is a common tool for marking where you want to drill so that the tip of the bit doesn't move as soon as you start drilling
|
# ? Mar 14, 2023 15:05 |
|
If you just want to make a dent to mark the spot where you will start drilling then you don’t need an entire set of punches. The set above is for when you have an existing hole with a specified size and you want to use it to lay out a matching hole in an underlying piece of material. You use the correct one from the set so it transfers the center of your existing hole to the new material. If you are laying out the hole from measurements instead then the size of the center punch doesn’t matter. withak fucked around with this message at 15:22 on Mar 14, 2023 |
# ? Mar 14, 2023 15:18 |
|
I think a spring loaded center punch is what you're looking for: https://www.homedepot.com/p/Husky-6-in-Automatic-Spring-Loaded-Center-Hole-Punch-70079H/302880581 Place the point where you want the hole, press down, and the punch effectively gives itself the equivalent of a whack with a mallet.
|
# ? Mar 14, 2023 17:05 |
|
FISHMANPET posted:No, I think you're talking about self centering drill bits. No those are for installing hinges & hardware so that the screw seats perfectly. I think those transfer punches are what I was looking for, but I may have to dig itt a bit more
|
# ? Mar 15, 2023 12:10 |
|
withak posted:If you just want to make a dent to mark the spot where you will start drilling then you don’t need an entire set of punches. The set above is for when you have an existing hole with a specified size and you want to use it to lay out a matching hole in an underlying piece of material. You use the correct one from the set so it transfers the center of your existing hole to the new material. In a sense, this is what you’re doing for hardware. The hardware has a given size hole and you wanna match it in the material to which it will be fastened. A regular punch without a pointy tip isn’t as accurate, especially for anything bigger than like 1/8” Strictly necessary? No, and I’ve done plenty of cabinets with just a regular punch and other people I’ve seen don’t even use that. But a set is $12 at Harbor Freight and it satisfies the faux OCD within me, so I’ll give it a “whack”
|
# ? Mar 15, 2023 12:16 |
|
Looking for some advice on hopefully levelling out and repairing a meh miter saw. I suspect buying a new one makes more sense, but I've got the time to burn on trying to make this thing workable. I also don't have a need for it all that often so can take my time here. It has two problems: 1) The rotating and fixed parts of the table are not level. 2) The locking handle for the bevel adjustment doesn't work. Doesn't seem to do anything. The bolt went missing at some point, so it couldn't even be fixed square easily. I attempted to just replace the bolt but I stripped it, over tightening I assume. Is it possible to salvage this? Here's some pictures of the locking mechanism:
|
# ? Mar 19, 2023 04:25 |
|
I'm somewhat invested in the dewalt battery line, but I'd love to pick up some tools that I may not use as often. Does anybody have any experience with any of those deawlt battery - Bauer tool adapters on ebay or Amazon?
|
# ? Mar 20, 2023 20:16 |
|
I need a garden hose nozzle/sprayer that will last more than one season. I'm not nice to them. I drop them on the concrete, leave them in the hot sun. I try to avoid letting them freeze with water in them.
|
# ? Mar 22, 2023 00:58 |
|
NomNomNom posted:I need a garden hose nozzle/sprayer that will last more than one season. I'm not nice to them. I drop them on the concrete, leave them in the hot sun. I try to avoid letting them freeze with water in them. There are two approaches to hoses and hose attachments: buy nice ones and take care of them or buy cheap ones and lose/abuse them. I buy nice hoses because the fancy ones don’t kink but I buy lovely sprayers seemingly every year because I break or lose them. There must be 10 of them buried in the mulch in my yard somewhere. Since you’re an abuser, just buy cheap ones and plan on replacing them unless you really think you’ll change your ways (you won’t)
|
# ? Mar 22, 2023 01:07 |
|
NomNomNom posted:I need a garden hose nozzle/sprayer that will last more than one season. I'm not nice to them. I drop them on the concrete, leave them in the hot sun. I try to avoid letting them freeze with water in them.
|
# ? Mar 22, 2023 01:14 |
|
NomNomNom posted:I need a garden hose nozzle/sprayer that will last more than one season. I'm not nice to them. I drop them on the concrete, leave them in the hot sun. I try to avoid letting them freeze with water in them. What are you spraying? If it's lawn products, a backpack sprayer is much better IMO and way more consistent.
|
# ? Mar 22, 2023 01:16 |
|
Slugworth posted:Gonna disagree with kaiser and say that if you buy a simple brass sprayer, it will last forever. The type where your spray pattern is just determined by how hard you squeeze the handle. No, you won't get the mist setting, or the gentle rain setting, or the whatever setting, but it will work forever.
|
# ? Mar 22, 2023 01:18 |
|
Rubber/vinyl + uv = cracked rubber. You have to hide it from the sun if you want it to last. Spend your money accordingly.
|
# ? Mar 22, 2023 01:21 |
These have been pretty beefy and lasted a few years now. I expect the partly plastic one to crap out sooner or later but the full metal one should just go indefinitely https://www.amazon.com/gp/product/B07NW5DXLQ/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1
|
|
# ? Mar 22, 2023 01:40 |
|
stealie72 posted:Same, but the old tymey firehose nozzle. The metal ones are really hard to kill and also still pretty cheap. I have not seen one of those since Hector (me) was a pup. Gosh darnit, I bet the old-timey hardware store here carries them too. I don't abuse the plastic ones, they're just made to crap out.
|
# ? Mar 22, 2023 02:55 |
|
Huh, apparently these are no longer an in-store item. Got mine maybe 6 years ago and there was a box of them along with the $20 plastic ones. https://www.homedepot.com/p/Melnor-Metal-Hose-Nozzle-505S/203136335
|
# ? Mar 22, 2023 03:06 |
|
stealie72 posted:Same, but the old tymey firehose nozzle. The metal ones are really hard to kill and also still pretty cheap.
|
# ? Mar 22, 2023 03:25 |
|
Slugworth posted:Yeah, I began to try to describe this style as well, but didn't land on anything as descriptive as old tymey firehose, so I gave up and
|
# ? Mar 22, 2023 03:40 |
|
Yeah the best I've tried is the classic melnor pistol grip nozzle. Lasted two years. Similar vein, anyone have any garden hose thread quick disconnects that are worth the case? No leaks?
|
# ? Mar 22, 2023 12:54 |
|
I haven't tried their sprayer tools but I will bet the ones from Eley are fantastic - https://www.eleyhosereels.com/ Been using their hose reels and hoses for years, got my family on them too. Ponied up for the couplers last year and I think they will last about forever, too. Those are clunky and big though. This is very much a you get what you pay for kinda thing. The hoses I have abused and left in the sun, and they still don't leak, they don't kink, they do kink nicely when you want them to, and the hose reels don't rust or complain and just work, year after year.
|
# ? Mar 22, 2023 13:04 |
|
I've had these for a few years with no problems. https://www.menards.com/main/p-1444427378873.htm I think Yardworks is a Menards house brand, but they're solid brass and pretty inexpensive. They've got "kits" like that or you can buy the pieces aka carte. I actually had a male to male adapter that leaked basically immediately and after a year or two I just replaced it with two quick connects because they don't leak. Pretty much every end of every hose or accessory of mine has one of these.
|
# ? Mar 22, 2023 13:19 |
|
Kaiser Schnitzel posted:There are two approaches to hoses and hose attachments: buy nice ones and take care of them or buy cheap ones and lose/abuse them. I buy nice hoses because the fancy ones don’t kink but I buy lovely sprayers seemingly every year because I break or lose them. There must be 10 of them buried in the mulch in my yard somewhere. Since you’re an abuser, just buy cheap ones and plan on replacing them unless you really think you’ll change your ways (you won’t) Which hose did you get? I've yet to find one that doesn't kink. (To be fair, the decent ones I have only really kink in winter when I'm resurfacing the skating rink. No issues in summer)
|
# ? Mar 22, 2023 14:31 |
|
Raised by Hamsters posted:I haven't tried their sprayer tools but I will bet the ones from Eley are fantastic - https://www.eleyhosereels.com/ This looks like exactly what I want. Ordered the sprayer and quick connects, will report back.
|
# ? Mar 23, 2023 00:47 |
|
One of my fancy Ryobi HP 18v batteries is not charging even though it's less than a year old (blinking red on multiple chargers). Do I just take it back to HD with a printout of the order receipt, or do I need to do something through Ryobi? Edit, if it matters, it was part of a 3-battery kit from a "buy batteries, get a free tool" deal last June. I don't need to return all three batteries since the SKU is three batteries, do I? stealie72 fucked around with this message at 18:15 on Mar 24, 2023 |
# ? Mar 24, 2023 18:13 |
|
stealie72 posted:One of my fancy Ryobi HP 18v batteries is not charging even though it's less than a year old (blinking red on multiple chargers). I would try to do all 3 if you can, get a free refresh out of it.
|
# ? Mar 24, 2023 18:26 |
|
H110Hawk posted:I would try to do all 3 if you can, get a free refresh out of it.
|
# ? Mar 24, 2023 19:07 |
|
NomNomNom posted:This looks like exactly what I want. Ordered the sprayer and quick connects, will report back. Those look pretty good, haven't seen them before. I've settled on the slightly smaller solid brass quick connects that Lee Valley and some others sell. They're getting ridiculously expensive but they last for years and if they start leaking the seal is easy to replace. The best price now is a local irrigation shop that caters to professional landscapers. Everything else available in town is junk. Home Depot used to sell solid brass fittings that worked well (and were compatible with the Lee Valley couplers) but the MBAs worked their magic and they started using pot metal instead. And don't get me started on the lack of standardization.
|
# ? Mar 24, 2023 20:07 |
|
I wonder if air hose fittings would work?
|
# ? Mar 24, 2023 20:09 |
|
stealie72 posted:One of my fancy Ryobi HP 18v batteries is not charging even though it's less than a year old (blinking red on multiple chargers). Find receipt.. hope you got the e-receipt or Lol. talk to ryobi chat.. They'll tell you which store(s) in your area are authorized repair places Take it to the tool rental desk there and some guy'll look at it and go yup then you get a new one in store unless they want to "repair" it
|
# ? Mar 24, 2023 20:13 |
|
stealie72 posted:One of my fancy Ryobi HP 18v batteries is not charging even though it's less than a year old (blinking red on multiple chargers). Here's the contact for support: https://www.ryobitools.com/support/contact I've heard contact by phone isn't so great, but YMMV. And here's the warranty documentation: https://www.ryobitools.com/support/warranties BeAuMaN fucked around with this message at 20:32 on Mar 24, 2023 |
# ? Mar 24, 2023 20:14 |
|
|
# ? May 31, 2024 22:24 |
|
NomNomNom posted:This looks like exactly what I want. Ordered the sprayer and quick connects, will report back. I'm curious how well those flow. I'm mostly using plastic Gilmour fittings, which are definitely going to fail within 1-3 seasons, because all the brass ones I've tried were to restrictive and I've found they lead to a noticeable drop in pressure whereas the plastic Gilmour's at least flow well.
|
# ? Mar 24, 2023 21:26 |