|
The MGS1 Rex being basically two pages with pics saying "yeah here's a camo guide, have fun" is the main reason I went for the black version with the waterslides.
|
# ? Nov 19, 2023 22:36 |
|
|
# ? May 23, 2024 15:17 |
|
Deviant posted:My buddy in Vegas got me something called Be careful sanding because anything with a special "finish" will have that finish rub off when sanding. Also, the nub marks will always lack the finish.
|
# ? Nov 20, 2023 01:23 |
|
Good call. I'll try to be extra careful to minimize sanding if any. Ideally an rg will do a lot of under gate to minimize it
|
# ? Nov 20, 2023 05:16 |
|
Deviant posted:Good call. I'll try to be extra careful to minimize sanding if any. Ideally an rg will do a lot of under gate to minimize it Be sure to do any tests on the runner, first.
|
# ? Nov 20, 2023 05:55 |
|
been working on the schwartzette tonight im too tired to finish it but my initial impressions are that i love the hoof feet. they're unique, they look cool, and they feel really sturdy as far as posing is concerned. A+ design
|
# ? Nov 20, 2023 06:32 |
Speaking of undergating - the nightingale was the first kit I've done to noticably feature it, and the vast majority of cuts on it were undergated, and I have to say I kind of like it a lot. I find them easier to cut cleanly and even if I gently caress it up, the scars are rarely ever visible.
|
|
# ? Nov 20, 2023 07:50 |
|
Pretty much all of the PG Exia was under-gated and it made the build so much nicer.
|
# ? Nov 20, 2023 09:31 |
|
"These Acguy iron nails are hilariously blunted I'll file them all nice and sharp." *later* "gently caress you past me"
|
# ? Nov 20, 2023 10:43 |
|
Nuebot posted:Speaking of undergating - the nightingale was the first kit I've done to noticably feature it, and the vast majority of cuts on it were undergated, and I have to say I kind of like it a lot. I find them easier to cut cleanly and even if I gently caress it up, the scars are rarely ever visible. Yeah, the GGG has a lot of undergating and it's mostly on areas that'll just be seams so it's not super visible
|
# ? Nov 20, 2023 14:31 |
|
Goddamn why's the HG Acguy kit go so hard with all this incredible detail that just gets covered up by armor plates?
|
# ? Nov 21, 2023 13:17 |
|
Because Acguy is literally the best. Check out the detail on the MG version, too.
|
# ? Nov 21, 2023 13:55 |
|
Kibner posted:Because Acguy is literally the best. This. And also the second part too. I've been trying to reduce my gunpla collection recently but MG Acguy is staying for sure.
|
# ? Nov 21, 2023 14:00 |
|
Wasn’t MG Acguy the first kit Dalong gave a score of 100 to? (I’m planning an armor cutaway build for mine)
|
# ? Nov 21, 2023 14:46 |
Finished my Gypsy Avenger from the second Pacific Rim movie. Pretty great kit overall and pretty simple paint color ratios, and only really two colors plus the gold for the visor to paint. Only issue I have is that I'll have to wait to pose it any other way because it needs an action base 2 connector and I only have base 5s.
|
|
# ? Nov 22, 2023 04:41 |
|
Kibner posted:A holding tray for wet decals: http://plamokojo.com/archives/product/decalingquicktray Trip report: I managed to get one of these in my last Suruga-ya order (I apparently snagged the only one up, or else I would have posted a link), and finally got around to using it last night. It definitely speeds up the decal process by a lot. Being able to prepare multiple decals at once means I can get a MG done in just one sitting or two (non ver. Ka, of course). Putting a mug warmer underneath it also ensures that I don't have to periodically change the water. I did quickly learn not to fully submerge the sponge with the decals on it since it scattered them all over after raising it back up. Obvious in hindsight, but at least nothing was ruined. The included plastic tweezers are trash so I'm sticking with my angled ones. The curved scissors are nice for when you're feeling lazy and don't want to use a hobby knife to cut out a decal. The little bin for used backing paper is a nice bonus, too. I'm sure there's cheaper DIY solutions, but for $15 shipped, I can't complain, especially in the drastic time saving.
|
# ? Nov 22, 2023 07:03 |
|
tip if you have pets, really really vacuum before applying chrome paint.
|
# ? Nov 22, 2023 08:10 |
|
All GaoMachines done gently caress this boy's fingers Up next is watersliding, then Final Fusion
|
# ? Nov 22, 2023 23:53 |
|
Less than two weeks later and I have my suruga-ya order. Everything's basically as new, just with some store stickers on them! The walker machine surprised me. I thought it'd be bigger but it was half the size I was expecting. --- now I'm being more precise with my work I'm finding im sanding and cutting more parts to fit better and now i'm worrying that my microplastics consumption has gone through the roof. Synthbuttrange fucked around with this message at 10:06 on Nov 23, 2023 |
# ? Nov 23, 2023 10:02 |
|
So is surugaya the better place to order nowadays? Any particular pros/cons compared to the usual suspects like HLJ? I'm in Europe if it makes any difference or anybody had experience ordering from there.
|
# ? Nov 23, 2023 12:17 |
|
The prices are half of what I'd pay for retail here if I'm ordering on the free shipping events. Took two weeks but thats fine im not in a rush. Apparently they were buried under extra orders so that may have been later than usual for them.
|
# ? Nov 23, 2023 12:21 |
|
Markovnikov posted:So is surugaya the better place to order nowadays? Any particular pros/cons compared to the usual suspects like HLJ? I'm in Europe if it makes any difference or anybody had experience ordering from there.
|
# ? Nov 23, 2023 12:40 |
|
It also varies a lot between different brands. Bandai prices (especially for MGs) are pretty close to local retail (at least for non pbandai kits) but kotobukiya kits seem much cheaper. For example the upcoming zone of the enders Anubis kit is like $90 on us based online retailers but $65 if I were to preorder it from Suruga-ya.
|
# ? Nov 23, 2023 18:49 |
|
Waffleman_ posted:
did you buy seperate water slides? The sticker arent bad, i just do not have the dexterity or patience for slides.
|
# ? Nov 23, 2023 18:54 |
|
Yeah, I bought a sheet of slides. I'm not going to do all of them, just the bigger details.
|
# ? Nov 23, 2023 18:58 |
Pbandai keeps adding more poo poo I want. I think I'm going to have to grab that Virunvee to go with the dunbine I preordered a while back.
|
|
# ? Nov 24, 2023 08:34 |
|
Got my Moderoid El Dora V coming in the mail, and turns out the Gundam Marker metallic set 2 has literally all the right shades for it, so obviously I had to get that too...
|
# ? Nov 24, 2023 08:45 |
|
I'm off to Japan next week and the day I'm going to the yokohama factory is 1 day before their xmas lighting event kicks off. I'm semi-near the place a few days later when we come back from Fukuoka is it worth swinging around again or is it the same as normal but in festive colours?
|
# ? Nov 24, 2023 10:40 |
|
Digihazard posted:I'm off to Japan next week and the day I'm going to the yokohama factory is 1 day before their xmas lighting event kicks off. I'm semi-near the place a few days later when we come back from Fukuoka is it worth swinging around again or is it the same as normal but in festive colours? Can't tell you about the lighting event, but if you want to get the docking tower tickets make sure to reserve them online - when I was there a month ago they were only available on-site for the earliest time slot, all the rest was prebooking only (they're also super expensive, but if you're going all the way out there you might as well do it right!)
|
# ? Nov 24, 2023 11:08 |
|
I went to the Yokohama Gundam last month and I would suggest going up if only because there isn't too much to do on the ground TBH.
|
# ? Nov 24, 2023 11:56 |
|
Digihazard posted:I'm off to Japan next week and the day I'm going to the yokohama factory is 1 day before their xmas lighting event kicks off. I'm semi-near the place a few days later when we come back from Fukuoka is it worth swinging around again or is it the same as normal but in festive colours? Fukuoka is a neat place, and has better things to see than Yokohama. It even has a better (though immobile) Gundam statue
|
# ? Nov 24, 2023 13:02 |
|
RillAkBea posted:It even has a better (though immobile) Gundam statue Can’t be helped — its soles are weighed down by gravity.
|
# ? Nov 24, 2023 17:23 |
|
I didn't realize there was a Gunpla thread. I think I've looked before in the Hobbies forum. Anyways, just reposting this boy.Saint Freak posted:I think we are successfully burning red.
|
# ? Nov 24, 2023 23:17 |
|
That was very cool! Also lol that huge box.
|
# ? Nov 24, 2023 23:51 |
|
oh, my new roommate arrived today.
|
# ? Nov 25, 2023 02:58 |
They've finally started construction on the new don quijote really close to where I live. It'll be great to not have to drive halfway across the island to look at all the gunpla I can't afford.
|
|
# ? Nov 25, 2023 03:57 |
|
Numero6 posted:That was very cool! It is an incredibly stupid box
|
# ? Nov 25, 2023 04:14 |
|
The Gojulas is a legitimately incredible kit. Enjoy!
|
# ? Nov 25, 2023 05:59 |
I'm about to make my first purchase on suruga-ya (getting myself the efreet custom I've been wanting for ages for my birthday) and the sheer temptation to order more poo poo because of free shipping is deeply tempting. But outside of novelties like 7-11 gundams I can't really think of anything else, that I could afford, that I'd want. I'm still mad I missed the pre-order time for pbandai's ghost gundam.
|
|
# ? Nov 25, 2023 08:27 |
|
Deviant posted:oh, my new roommate arrived today. Aww yeah. Be sure and set the mood for your build sessions. Cook yourself a nice meal. Pour yourself a glass of wine. Set the lighting just right. Put some Barry White on or something like that. Don't just turn the lights up and grab tools. Treat yourself, and the PGU, right. Show some love. Show some respect.
|
# ? Nov 25, 2023 09:01 |
|
|
# ? May 23, 2024 15:17 |
|
Saint Freak posted:It is an incredibly stupid box I'm really curious to see how big that thing actually gets. If I had the space, and the money, I'd absolutely get one. Godspeed on your 1400-piece journey to assemble it.
|
# ? Nov 25, 2023 09:19 |