|
Blistex posted:NO! These things are a waste of time, gas, wood, and money. They do not work as advertised and I've yet to meet one person who has had a good experience with these hunks of junk. The best thing to do is to find someone with a sawmill and give him the hangdog-look or some money so he'll cut the wood for you. https://www.youtube.com/watch?v=oyvGCibr7ms Slugworth fucked around with this message at 04:23 on Jun 10, 2012 |
# ? Jun 10, 2012 04:15 |
|
|
# ? May 16, 2024 18:51 |
That guy strikes me as maybe 1 part mad scientist and like 9 parts just plain old crazy. I kinda want to meet him in person, pretty sure he'd be a hoot. My favorite part of that video is right at 4:20, I think it nicely sums up the guy in his entirety. For what it's worth, I would totally consider building something myself, if I had any skill at all in the welding area. That's something I've always wanted to do, but just haven't had the wherewithal to get started on. Probably not like this guy has, as I'd want to be able to make slabs and there's just no way you're going to do that with consumer grade circular saw blades. A horizontal band saw would be absolutely tits, though. e: Oh man, you changed the video. The first one was waaaaay better for the crazy factor. Here, I'll post it myself because it was hilarious: https://www.youtube.com/watch?v=5sPu_TcUtyU ee: Well, looks like you at least posted another video from the same guy. What a nut! Bad Munki fucked around with this message at 04:26 on Jun 10, 2012 |
|
# ? Jun 10, 2012 04:23 |
On a side note: I'm really having trouble finding any woodworking suppliers around my new area. As far as I can tell, there aren't any formal clubs around here, and poking around for businesses on google has been less fruitful than I would have hoped. I don't even need anyone specializing in woodworking, really, I'd be happy just having a local supplier for materials beyond what is carried by Home Depot and Lowe's. You know, for the more interesting stuff. I'd kill for a slab of walnut right now, I want to make a fancy headboard. Erie, PA, you disappoint me.
|
|
# ? Jun 10, 2012 05:33 |
|
$700ish worth of stuff with the extension drilchuck and rest for $125 Craigslisting from people who have no idea what they have is the best
|
# ? Jun 10, 2012 19:00 |
|
Mathias at woodgears.ca did a bandsaw sawmill that looked a little more realistic: http://woodgears.ca/bandmill/index.html
|
# ? Jun 10, 2012 19:01 |
The Spookmaster posted:
Wow, that's a crazy-sweet deal. I mean, stupidly awesome.
|
|
# ? Jun 10, 2012 19:06 |
|
Yea and I even talked him down from one $150
|
# ? Jun 10, 2012 19:10 |
I'll buy that extension bed from you for a hundred bucks :P
|
|
# ? Jun 10, 2012 19:23 |
|
oh dear I'm jealous. and I thought my floor model buffalo #15 with a brand new chuck for $50 was a good deal! haven't actually got it yet, but they did say i could have it and would call when I can go get it... here's hoping they don't flake out on me...
|
# ? Jun 10, 2012 19:38 |
|
Bad Munki posted:e: Oh man, you changed the video. The first one was waaaaay better for the crazy factor. Here, I'll post it myself because it was hilarious:
|
# ? Jun 10, 2012 23:51 |
|
I've heard both ways on the alaskan mills. Some say they suck, some say they work ok. They are demanding on a saw. A dedicated rip chain and a beefy saw probably make a world of difference. At that point though, you could have hired someone to cut a several thousand board feet of lumber. Haven't done a pen in a while. So here's a pen.
|
# ? Jun 11, 2012 00:17 |
|
I am pretty decent at woodworking but no expert. This would be my biggest project thus far, but I am considering trying to make a screened in porch for my backyard. I don't want anything too fancy, but I can't seem to find blueprints or any decent advice on how to get started, especially since I've never made a large structure or anything other than small boxes and decorations. Any advice or redirection would be appreciated.
|
# ? Jun 11, 2012 19:24 |
|
The Spookmaster posted:
Nice score, I wish my craigslist had deals like that gently caress you I am so jealous, must be nice
|
# ? Jun 11, 2012 20:09 |
|
I don't know anything about lathes so I've been hesitant to look on craigslist or similar sites and have been just looking for new ones. Unfortunately the price is a bit prohibitive to get a decent one for $700. So lathe goons, is this a decent deal? I was thinking of offering $150 and working from there. http://toronto.en.craigslist.ca/tor/tls/3053779227.html Assuming it works. If it matters my main interest is turning bowl and anything smaller than that. Edit: Found another http://toronto.kijiji.ca/c-buy-and-sell-tools-power-tools-Ryobi-Wood-Lathe-37-plus-chisels-W0QQAdIdZ384590811 I apologize if these kind of posts aren't ideal, I just don't know where else to turn as a beginner. Help is much appreciated. keep it down up there! fucked around with this message at 21:16 on Jun 11, 2012 |
# ? Jun 11, 2012 21:03 |
|
I don't know much about lathes either but $200 + chisels + free delivery sounds good to me if he doesn't go for $150.Dassiell posted:I am pretty decent at woodworking but no expert. This would be my biggest project thus far, but I am considering trying to make a screened in porch for my backyard. I don't want anything too fancy, but I can't seem to find blueprints or any decent advice on how to get started, especially since I've never made a large structure or anything other than small boxes and decorations. Any advice or redirection would be appreciated. You might take a look at some of those home improvement books the big box stores carry. I swear I've seen projects like that in them. One piece advice before you get started is to be sure that it complies with your local zoning, ordinances, building codes, homeowners associations, etc.
|
# ? Jun 11, 2012 21:46 |
|
Don't get a bar lathe unless you want to turn predominantly spindles. They just aren't built for anything not weighted really evenly like a bowl blank may be. I would honestly look to get something like http://www.harborfreight.com/garage-shop/stationary-wood-lathes/12-inch-x-33-3-8-eighth-inch-wood-lathe-with-reversible-head-34706.html if you cant find something locally if you are just starting out. Jet/Grizzly makes a model that is basically the same thing with their logo stamped on it. I have the jet and for beginner to intermediate I personally think its great. With a few bags of playground sand on a plywood board you have the stability to rough out fairly out of balance blanks without much trouble. For tools I cant recommend http://www.pennstateind.com/store/LXWM1007.html or one of their similar sets. The price is very reasonable and they hold a really strong edge. I took some turning classes a while ago and the teacher who's been turning for 30+ years and is fairly well known couldn't say enough good things about them and I agree. You also have to keep in mind you'll need a grinder if you dont have one. You can sharpen on a regular grinder just fine but slow speed are more forgiving and lighter on your tools if you are new so keep that in mind when you are pricing things out as well. With either grinder type you are going to need turning specific wheels which can run from $30-$80. I have http://www.woodcraft.com/Product/2080939/29437/8in-Slow-Speed-Grinder.aspx Which has worked great combined with a few jigs. Turning can start to become pretty expensive so buy used as much as you can and really shop around since woodcraft/rockler/penn state/craft supplies usa all have deals every week or so.
|
# ? Jun 11, 2012 22:59 |
|
Bad Munki posted:Man, there are a lot of great logs around here. I'm genuinely considering getting one of these Granberg small log saw mills. Anyone used these, or any of their products? $130 on Amazon, doesn't seem too bad to me if it works as advertised... I bought one awhile back. It works ok but you have to have a REALLY nice chainsaw and sharpen the chain between passes to make it work reasonably. Still, if you are 100 yards from an accessible road and need to move a 600lb+ log, it might be your best option. It should be noted that I only use it to half a log, it's not going to mill it to anywhere close to a useable state.
|
# ? Jun 11, 2012 23:12 |
|
ChaoticSeven posted:I've heard both ways on the alaskan mills. Some say they suck, some say they work ok. They are demanding on a saw. A dedicated rip chain and a beefy saw probably make a world of difference. At that point though, you could have hired someone to cut a several thousand board feet of lumber. Alaskan mills are great, but you need a very, very big saw. 90% of the problems come from not enough power. A Stihl MS660 (or the equivalent Husky) is truly the minimum.
|
# ? Jun 11, 2012 23:21 |
|
Dassiell posted:I am pretty decent at woodworking but no expert. This would be my biggest project thus far, but I am considering trying to make a screened in porch for my backyard. I don't want anything too fancy, but I can't seem to find blueprints or any decent advice on how to get started, especially since I've never made a large structure or anything other than small boxes and decorations. Any advice or redirection would be appreciated. Houses vary so much it's hard to find anything other than the most generic plans. What you'll want to do is study up on carpentry and if possible, get someone with experience to help. I've remodeled two houses and started with nothing but a background in drafting and intellectual knowledge of carpentry but my uncle (life-long carpenter and construction worker) would stop by and accomplish more in 15 minutes than I could in a half a day. For any specific advice, you would need to post pictures of the house and how big you want to build it. Also, check on building codes. Here you can build almost anything you want as long as it isn't attached to the house or anchored in the ground but once attached it must have a permit and be inspected or they can make you tear it down. But codes vary.
|
# ? Jun 12, 2012 09:07 |
|
wormil posted:Houses vary so much it's hard to find anything other than the most generic plans. What you'll want to do is study up on carpentry and if possible, get someone with experience to help. I've remodeled two houses and started with nothing but a background in drafting and intellectual knowledge of carpentry but my uncle (life-long carpenter and construction worker) would stop by and accomplish more in 15 minutes than I could in a half a day. Well, I want to make the screen not in contact with the house anyway, and I haven't really decided exactly on the sizes yet but I am only just looking into doing it now. I'll definitely look into codes and stuff though, but I think I should be okay with that too.
|
# ? Jun 12, 2012 13:44 |
|
The Spookmaster posted:Advice Thanks so much for the advice. It helps a lot!
|
# ? Jun 12, 2012 16:33 |
|
I'm building a quick-and-dirty pedestal bed frame; no drawers or fancy finishing, it's just going to be 1x12s on edge to form the "pedestal" with 1x12s laid flat on top for the mattress surface. A bit of molding on the exposed edges of the top boards is about all I'm planning as far as finishing. Despite its self-declared "quick-and-dirty" nature, though, I'd like to do something other than ugly, boring butt joints for the pedestal pieces. I was thinking of cutting 1" fingers and doing a finger joint. In boxmaking I know it's fairly common to use a router table and jig, and run the box sides vertically through the router. With 6-plus foot boards, even if my garage were tall enough I don't think there's any way I'd be able to hold the boards steady enough to be safe, let alone get a good cut. Any tips for building a "sideways" jig or cutting aid? I'm trying to figure out a way to lay the boards flat across a couple saw horses, but not having much luck figuring out a way to keep the router perpendicular. Is it probably more time and effort than it's worth? Rocket Man fucked around with this message at 00:09 on Jun 13, 2012 |
# ? Jun 13, 2012 00:01 |
|
Rocket Man posted:Is it probably more time and effort than it's worth? Probably. You could probably jig something up but I'd wear a full face mask while doing it as the chips and dust would be flying right back at you. It would probably just be easier to saw them. Another thought would be using 2" square stock on the corners to cover the end grain, similar to crown moulding corner blocks. And use corner brackets or pocket screws to hold them together; or you could probably rig up something. http://houseoffara.com/products/base-blocks/all/OCBE8MD http://www.rockler.com/product.cfm?page=21578&site=ROCKLER
|
# ? Jun 13, 2012 00:58 |
|
The Spookmaster posted:
Missed this, disgusting thief that you are. Hope you don't enjoy having money. Chestnut roughouts from a while back were dry enough to finish out. Turned out pretty nice, but brittle and chippy.
|
# ? Jun 13, 2012 01:35 |
|
wormil posted:Another thought would be using 2" square stock on the corners to cover the end grain, similar to crown moulding corner blocks. And use corner brackets or pocket screws to hold them together That sounds like an excellent idea, as a matter of fact - I think it'll even look better than the original plan. Simple, elegant solution; thanks!
|
# ? Jun 13, 2012 02:29 |
|
Ok, could use some tool recommendations. I've pretty much decided that I'm buying a Jet JPS-10 tablesaw and will probably replace the existing fence with an aftermarket one, so I'll just get the 32" model with cast iron wings. I also have my eye on a Porter cable router and have found a couple plans for building my own router table. I'm really liking the looks of this Powermatic Drill Press because it's powerful enough to use for some other projects I'm interested in, and push comes to shove I can pop some mortising bits in there and use it as a mortiser until I can get a dedicated one. So, I could use recommendations for a good bandsaw and a decent planer. After taking a lathe class last weekend, I'm probably going to buy a lathe in the future, but I have too many basic tools I need to get prior.
|
# ? Jun 13, 2012 05:55 |
|
sky shark posted:Ok, could use some tool recommendations. I've pretty much decided that I'm buying a Jet JPS-10 tablesaw and will probably replace the existing fence with an aftermarket one, so I'll just get the 32" model with cast iron wings. I also have my eye on a Porter cable router and have found a couple plans for building my own router table. Did Powermatic work the kinks out of that drill press? I've seen lots of posts over at Sawmill Creek about really spotty quality on them. As far as bandsaws go, I'm a big fan of my Grizzly saw. They have a bunch of different models and you can pretty much find something for every price range.
|
# ? Jun 13, 2012 11:12 |
|
Good looking out. I've found a less expensive delta that has rave reviews instead
|
# ? Jun 13, 2012 16:58 |
|
Followup post: I've gone ahead and pulled the trigger on the Jet JPS-10 saw, Delta 18-900L drill press and a crapload of incra gear (TS-LS Combo #4, router with lift kit, miter gauge, etc) If there's interest I'll see what I can do about documenting putting this stuff together. Next up: replacement sawblades for the tablesaw. Woodgears.ca likes using 6" skillsaw blades for a lot of his work since they are thinner, but he uses the evil metric system. Has anyone had good results with anything similar, or have recommendations for decent saw blades & dado sets? Also, bandsaw needed! There's a number of sawmills nearby (or not too far away) so I'm really looking forward to working with decent wood. sky shark fucked around with this message at 04:22 on Jun 15, 2012 |
# ? Jun 15, 2012 04:20 |
|
Freud or Forrest, I've seen some good reviews on Amana blades as well. Freud makes blades in a range of quality/prices from carpentry to fine woodworking. Forrest generally squeaks out on top in reviews.sky shark posted:Woodgears.ca likes using 6" skillsaw blades for a lot of his work since they are thinner, but he uses the evil metric system. On his old saw or new saw? His new saw looks to be running a 10" but then I've never paid much attention. I think in at least one video he used smaller carpentry blades for cutting dadoes, something I've also done since I don't have a dado set. Smaller 7.25" blades are sometimes used on saws with universal motors but you can get thin kerf blades in 10" and I see no reason to go small on your saw (other than a dado set).
|
# ? Jun 15, 2012 05:13 |
|
wormil posted:Freud or Forrest Indeed. Someone gave me a pretty decent sized pecan. Two more, even larger and a giant oak as well. Trouble with those three are that they are still standing and 350 miles away back home. Edit: Yes, that is a Cat6 cable strung across the yard, from the house and into the shop I work at down here in the summer. ChaoticSeven fucked around with this message at 04:29 on Jun 16, 2012 |
# ? Jun 16, 2012 04:22 |
One man's trash...
|
|
# ? Jun 16, 2012 04:32 |
|
Love a lot of the work in this thread. Question (hope this is an appropriate spot) -- I'm getting ready to move into a new house and want to get a new dining room table. Anyone in the SoCal area and for hire? Or any recommendations on people who could do that kind of work? Really like the look of the table here - http://www.thisoldhouse.com/toh/how-to/intro/0,,20579751,00.html
|
# ? Jun 16, 2012 23:54 |
|
Cant really help you but man that table is awesome. I want one
|
# ? Jun 17, 2012 00:15 |
|
ScooterMcTiny posted:Really like the look of the table here - http://www.thisoldhouse.com/toh/how-to/intro/0,,20579751,00.html Any good handyman should be able to make that, no problem. The tricky part will be finding the right wood for the top, if you want to stick with recycled.
|
# ? Jun 17, 2012 08:22 |
|
Bad Munki posted:One man's trash... I know. They'd already started cutting the smaller limbs into firewood. Thankfully they didn't get to the big stuff. After a 70 hour work week I wasn't sure I'd feel like loving with turning today, but turns out I did. First I grabbed one of the smaller crotch pieces and cut it in half. Turned two rough outs from the halves, but only photographed one. Both are around 13"x4". Then I cut into one of the larger round pieces that looked promising. Dark heartwood, light sapwood. Did you know pecan heartwood kinda smells like chewing tobacco? Not snuff or Skoal. Like Redman. Not really unpleasant. Anyway, I bought these giant dividers that can sketch out circles up to 36" in diameter. I scribed a 20" circle, the maximum swing of my lathe without moving the headstock to the end. I'm going to turn a truly absurd bowl later on, when I get a 6" faceplate and a bigger chuck to support the blank. Anyway, I used the chainsaw to cut this mostly round. I also made the cuts slanted to cut even more waste away before mounting it. I didn't feel like wrestling something this big on the (relatively) small bandsaw table. When I did mount it, it was surprisingly close to true and I was able to start out at around 400-500, a big help. Here it is, with the outside shape done. I've just pulled the tailstock back in preparation to true up the tenon for the chuck. Now I've flipped it around and mounted it in the chuck. Since my chuck and chuck jaws are kind of undersized for something this large I've brought up the tailstock and left a central column for support. Once I got the outer walls done and started moving closer to center where the cutting forces and my pushing were more focused toward the chuck I turned off this column with a long series of light cuts. Here it is roughed out. It's about 18.5" by 6.25".
|
# ? Jun 17, 2012 22:58 |
|
Dude. Yes. I have a halfie. Saw this resaw video posted by someone and it reminds me of that wild inventor woodsman guy who I think Spookmaster posted earlier.. anyway apparently gently caress bandsaw jigs, just do this (no please don't): https://www.youtube.com/watch?v=TiJGmwyYK8k
|
# ? Jun 18, 2012 02:34 |
|
Here is a table that I have been working on for a while now. The tops are from a walnut crotch and the legs are made from ash. There was a cut in the end of one of the slab from when it was milled. Originally I wanted to fill it with ebony, but I couldnt find a piece large enough. Instead I laminated some maple veneer together and crammed it in there. It was pretty difficult but I'm happy with the results. A few months back I made a smaller table with a piece from the same walnut crotch as a prototype. Here is mama and baby. My favorite thing about this table is the figuring in the top slab, I think it is beautiful. Originally I had completely filled the large void in the top with epoxy, but I didnt like the way it turned out so I removed it.
|
# ? Jun 18, 2012 02:44 |
|
A local guy has a Delta #28-560, 16" throat depth, 1/2HP, 3 wheel bandsaw for sale, wants $150. The pic he sent is blurry but I'm going to see it tomorrow. Any thoughts on 3 wheel bandsaws? I've never use a 3wheel and am not very familiar with them. Edit: after reading up I'm going to look at one of the many 12" Craftsman bandsaws selling locally. Looks like the 3wheels are prone to blade breakage and suck rear end at resawing. wormil fucked around with this message at 06:11 on Jun 20, 2012 |
# ? Jun 20, 2012 05:48 |
|
|
# ? May 16, 2024 18:51 |
|
I bought a One Way Talon Chuck from Rockler and they gave me a threaded insert for a stronghold chuck. I look online to see they are back ordered till July 6th for the right insert. Talk about blue balls dropping the money on the chuck only to have to wait almost a month
|
# ? Jun 21, 2012 03:23 |