|
500 amps through that meter? That's gotta be fake. Over the top and amusing, but fake. Oh man, this guy's channel is great. https://www.youtube.com/watch?v=0-HYPdh744M "Don't want too much beer around high voltage!" I love it where he blows up the 80kAIC fuse! Three-Phase fucked around with this message at 01:16 on Nov 2, 2012 |
# ? Nov 2, 2012 01:07 |
|
|
# ? May 19, 2024 16:27 |
|
Three-Phase posted:500 amps through that meter? That's gotta be fake. Over the top and amusing, but fake.
|
# ? Nov 2, 2012 01:13 |
|
But running 500A through a 100A service and damaging the meter? (Wait, that wasn't the main house meter, right? That might be a little more believable.)
|
# ? Nov 2, 2012 01:18 |
|
Three-Phase posted:But running 500A through a 100A service and damaging the meter? (Wait, that wasn't the main house meter, right? That might be a little more believable.) grover fucked around with this message at 01:43 on Nov 2, 2012 |
# ? Nov 2, 2012 01:39 |
|
Photonic Induction vids are awesome. He used to have a ton more on youtube, but he flipped out and deleted all of them at one point.
|
# ? Nov 2, 2012 03:01 |
|
Ah man, I've been having brain farts all week, Grover. I wasn't sure how those things look/work in the UK either.
|
# ? Nov 2, 2012 23:56 |
|
Can you tell me what the hell happens in this video? It looks like they're trying to disconnect a breaker which arcs to earth, right? Shame about the quality, but it sounds pants-shittingly terrifying. https://www.youtube.com/watch?v=IageMUi0G80
|
# ? Nov 4, 2012 03:21 |
|
schmuckfeatures posted:Can you tell me what the hell happens in this video? It looks like they're trying to disconnect a breaker which arcs to earth, right? Shame about the quality, but it sounds pants-shittingly terrifying. Yep! Better question: How the gently caress is that guy alive?
|
# ? Nov 4, 2012 05:04 |
|
schmuckfeatures posted:Can you tell me what the hell happens in this video? It looks like they're trying to disconnect a breaker which arcs to earth, right? Shame about the quality, but it sounds pants-shittingly terrifying. Christ, that electricity is angry What the gently caress happened?
|
# ? Nov 4, 2012 17:40 |
|
Well, he's definitely trying to open some kind of isolator, it looks like, judging by the crank he's turning.
|
# ? Nov 4, 2012 21:23 |
|
Three-Phase posted:Well, he's definitely trying to open some kind of isolator, it looks like, judging by the crank he's turning. So he was trying to cut off power to that power line, and for some reason the electricity just went "gently caress NO "? That's something that happens? gently caress this poo poo I'm getting candles.
|
# ? Nov 4, 2012 21:29 |
|
FrozenVent posted:So he was trying to cut off power to that power line, and for some reason the electricity just went "gently caress NO "? I'm not sure if it was under load or not. Here's one where the SF6 breaker poles failed and the isolator was opened under load. Those switches are not meant to be open with electricity flowing through them. They open too slowly and don't have a way to "blow out" the arc that forms. https://www.youtube.com/watch?v=hIkNY5xjy5k Three-Phase fucked around with this message at 21:43 on Nov 4, 2012 |
# ? Nov 4, 2012 21:39 |
|
Is just walking up to the thing with 1000s of volts running through and flipping the switch how this normally works or just a"lol, eastern Europe" procedure? Obviously that huge arc flash isn't supposed to happen but given the possibility that it could wouldn't it be wise to use a 100 foot long stick and some PPE?
|
# ? Nov 4, 2012 23:11 |
|
stealthdozer posted:I just stumbled across this: What the hell is this video?
|
# ? Nov 5, 2012 00:32 |
|
Hah, he used video clips from the movie "Pulse".
|
# ? Nov 5, 2012 00:50 |
|
Cross-posting from the generator thread: If you paid less than a couple hundred bucks for your UPS, you can be pretty sure it will look like this, too: For those considering different ways to power your laptop:
|
# ? Nov 6, 2012 20:34 |
|
The Proc posted:Yep! Better question: How the gently caress is that guy alive? He does commercial power installs for a living. Working with high power electrical systems is literally what he does. He flipped out and deleted his old videos because people didn't understand that he IS THE EXPERT and knows what he's doing. He even understands where what he's doing will cause things like say.. spontaneous x-ray generation and the like. Most of what he does involves very, very high currents, more than very, very high voltages. Which mitigates the risk somewhat. Unless you're going out of your way to provide low resistance paths to either side of your heart, you're not going to have a heart stopping experience around a couple volts. Big sparks, lots of fun magnetics, hot things, sure. But nothing worse than working around an engine. VVVV_____ Ooops Nerobro fucked around with this message at 22:26 on Nov 6, 2012 |
# ? Nov 6, 2012 21:38 |
|
Nerobro posted:He does commercial power installs for a living. Working with high power electrical systems is literally what he does. I know who you're talking about about and he's awesome, I was asking about the crazy Russian guy in the post above mine who walked up to a live transmission line and did... something.
|
# ? Nov 6, 2012 22:13 |
|
grover posted:Cross-posting from the generator thread: Cool stuff. Does my laptop charger care much about these waveform abnormalities?
|
# ? Nov 7, 2012 00:44 |
|
Guy Axlerod posted:Cool stuff. Does my laptop charger care much about these waveform abnormalities? Id really like to see a comparison that shows how this effects the output of the laptop charger. I'm guessing it doesnt.
|
# ? Nov 7, 2012 01:09 |
|
Guy Axlerod posted:Cool stuff. Does my laptop charger care much about these waveform abnormalities?
|
# ? Nov 7, 2012 01:47 |
|
grover posted:Cross-posting from the generator thread: This is neat, I always wondered how car inverters generate a nice sine wave. The answer is they don't!
|
# ? Nov 7, 2012 01:48 |
|
peepsalot posted:This is neat, I always wondered how car inverters generate a nice sine wave. The answer is they don't! grover fucked around with this message at 01:58 on Nov 7, 2012 |
# ? Nov 7, 2012 01:55 |
|
peepsalot posted:This is neat, I always wondered how car inverters generate a nice sine wave. The answer is they don't! I don't know what kind of alternator is used for those plots, but if you use a synchronous generator and the prime mover is providing a constant rotation, your output will be a pretty perfect sine wave. That plot was using a crappy home generator that most likely uses brushes or something to output a single phase residential voltage. A car alternator is going to be three phase to provide better DC rectification through a diode bridge. That output will not be as jagged, though also not a constant frequency. Grover: For a home generator, you can just plug into a 6-30R (or whatever) mounted on the bottom of the panel and wire a neutral/ground wire from the genset to panel neutral/ground bus, right? Those portable generators are bonded, and the utility service bond will be outside the house, correct? Also, if a portable home generator puts out 240V, is it a true split single phase in that you will get 240V from each lead and 120V to the neutral? A few people were asking me about this and I wasn't too familiar with those home depot specials.
|
# ? Nov 12, 2012 03:15 |
|
Cheesemaster200 posted:Grover: As you're aware (but others reading this thread may not be), every electrical system in the US is required to have one, and exactly one, point where the neutral is bonded to ground. This places the neutral at ground potential, and increases safety. It's important in fault clearing, because if a short circuit energizes an exposed piece of metal (all of which are required to be grounded), it will create a short circuit path back to the panel, tripping a breaker, and preventing anyone from getting shocked. If the neutral were to be bonded at multiple places, that would place the ground path in parallel with the neutral, and would cause current to flow not only through the ground wire, but the backfeed through every grounded piece of metal in incidental contact with earth- water pipes, enclosures, etc. It's a safety risk that electrical codes are designed to prevent. Every portable generator sold in the US is going to have a neutral-ground bond. You need to carry both the neutral and ground from the generator into your panel for proper ground-fault clearing, so you need to use 4 wires and a 4W plug (EG, L16-30 vice L6-30). When transfer switches are installed for use with portable generators, they'll switch the neutral and deal with the issue that way. If you hook it directly to your panel, though, you end up with two neutral-ground bonds, and current flowing through the ground wire. With voltage drop over the generator cable, sets up potential for ground loops. To really do it "right", if not disconnecting the neutral in your panel, you should be removing the neutral-ground bond from the generator whenever you connect it to your home, and replacing it whenever you're using it standalone. If you haven't seen it, I talked a bit about this all in the generator thread, too. grover fucked around with this message at 16:48 on Nov 12, 2012 |
# ? Nov 12, 2012 03:43 |
|
Maybe a silly question but I've never gotten an answer... Years back me and some friends would sometimes walk through a field/walkway right next to those big hydro lines. One spot specifically of about 15 feet by 15 feet where, I noticed I would always get a headache, sort of like right between the eyes, kind of tingling and throbbing. It was between where two of the lines/connector things would arc over the path. Everyone told me it was just my imagination and that they can't cause headaches from so far up above us. But I swear, it happened two or three times in the exact same spot. Admittedly, it was only me who ever claimed to feel anything out of the four of us. Is such a thing possible? or was it just my imagination?
|
# ? Nov 12, 2012 09:24 |
|
I just graduated with an EE degree with a specialty in power systems this May, and I've been hoping to break into the energy industry. I received an offer with Schneider Electric as a Junior Engineer which would have put me on that path, but I had to turn them down because of issues with my living situation (renewed my lease the day before I got the offer, still hate myself for that one). I currently work at a government contractor that specializes in electromagnetic sensor testing and analysis. While it's pretty interesting stuff, I still want to switch over to power systems. Will my work with sensors have any relevant applications for when I apply for those jobs, or am I kind of starting from square one with my time-eroded degree specialty?
|
# ? Nov 12, 2012 14:18 |
|
The Cleaner posted:Maybe a silly question but I've never gotten an answer... Not a Children posted:I currently work at a government contractor that specializes in electromagnetic sensor testing and analysis. While it's pretty interesting stuff, I still want to switch over to power systems. Will my work with sensors have any relevant applications for when I apply for those jobs, or am I kind of starting from square one with my time-eroded degree specialty? grover fucked around with this message at 17:08 on Nov 12, 2012 |
# ? Nov 12, 2012 17:04 |
|
Not a Children posted:I just graduated with an EE degree with a specialty in power systems this May, and I've been hoping to break into the energy industry. I received an offer with Schneider Electric as a Junior Engineer which would have put me on that path, but I had to turn them down because of issues with my living situation (renewed my lease the day before I got the offer, still hate myself for that one). Sensors in power systems are mostly limited to measuring voltage & current, using ancient technology that will never change. I could talk about measuring currents using light or other magnetic sensor gimmicks but they all suck hardcore and forever will. Depending on what you do now, knowing how how to test stuff/write proper test procedures is a great skill to have because all power equipment is going to be tested at least twice before put into service. Getting in as a commissioning engineer (if you can bear the travel) of some sort isn't a bad way to get a lot of practical experience fast.
|
# ? Nov 12, 2012 22:27 |
|
The Cleaner posted:Is such a thing possible? or was it just my imagination? I have to walk under four sets of energized 500kV lines to get to work in the morning never felt a thing. You can never say that the EMF isnt doing something as it is pretty substantial. However the EMF from an MRI machine is probably several million times stronger and people routinely stick there heads in there for extended periods of time with no ill effects.
|
# ? Nov 12, 2012 23:47 |
|
The Cleaner posted:Is such a thing possible? or was it just my imagination? Could you show us where that is on a map? Maybe there's something going on that you might not be thinking of.
|
# ? Nov 13, 2012 02:07 |
|
Three-Phase posted:Could you show us where that is on a map? Maybe there's something going on that you might not be thinking of. Sure here's a Google Map satellite of the spot. The upper left is the football field, below it houses, to the upper right is the power station, and right in the middle there is the little dirt path where we would cut through everything walking underneath the powerlines electric hydro thingamajigs cables. Ya any info would be appreciated, even if you think it was all just co-incidence and maybe I just got a short-lived headache by chance each time. I suppose that's possible, despite it not being a regular headache. I've thought about going back there to stand under it again as an experiment but I wanna check you guys first.
|
# ? Nov 13, 2012 07:44 |
|
Most likely explanation is the nocebo effect.
|
# ? Nov 13, 2012 07:48 |
|
The Cleaner posted:Ya any info would be appreciated, even if you think it was all just co-incidence and maybe I just got a short-lived headache by chance each time. I suppose that's possible, despite it not being a regular headache. I've thought about going back there to stand under it again as an experiment but I wanna check you guys first.
|
# ? Nov 13, 2012 11:39 |
|
The Cleaner posted:Sure here's a Google Map satellite of the spot. Placebo/psychosomatic effect. I used to get this too, even though I knew it was new-age bullshit about "waves". I finally made myself sit under the power lines for a few minutes, the feeling went away, and it hasn't happened again. This was despite knowing logically that it was all bullshit. Your brain tricks you and knowing it's a trick doesn't always remove the illusion.
|
# ? Nov 13, 2012 16:47 |
|
Thanks, good to know guys. Though are you serious about the fluorescent light bulb?
|
# ? Nov 13, 2012 19:25 |
|
I've never tried it but I have heard that they will light up under the high voltage power lines. There's a substation almost next door to me, I need to take a light out by it sometime and see if it will light up. I've also heard you can stick some sort of coil under those lines and pick up free electricity off of it. It's also supposed to be highly illegal so don't try it.
|
# ? Nov 13, 2012 22:25 |
|
The Cleaner posted:Thanks, good to know guys. Though are you serious about the fluorescent light bulb?
|
# ? Nov 13, 2012 22:30 |
|
Maniaman posted:I've also heard you can stick some sort of coil under those lines and pick up free electricity off of it. It's also supposed to be highly illegal so don't try it.
|
# ? Nov 14, 2012 00:40 |
|
|
# ? May 19, 2024 16:27 |
|
grover posted:Yes! Works best with an old-school T12, but even a CFL will glow. Holy.. crap. So uh.. there is really nothing to those studies that show cancer rates living near power lines and such? That seems pretty crazy I kinda wanna try that though. Just bring a box of lightbulbs out there and see what happens.
|
# ? Nov 14, 2012 09:27 |