|
leica posted:Hopefully I'll have it in the driveway tomorrow and I'll take pics Sweeeeeeeeeeet. You know there is that wreck MS6 around here. You could do a MS6 wagon conversion.
|
# ? Nov 15, 2012 05:45 |
|
|
# ? May 10, 2024 13:24 |
|
Deal ain't gonna happen for now, waiting on an offer for my Vic and the guy that owns the wagon is farther away than I thought, so I'm not gonna go without cash in hand. Might not get this one, but I'm pretty sure I'm going to end up with a 6 wagon as I can't find anything better for my needs within in my budget. http://tinyurl.com/akh49uj Applebees Appetizer fucked around with this message at 06:57 on Nov 15, 2012 |
# ? Nov 15, 2012 06:55 |
|
Finally time for front brakes ..Just short of 115 K miles. My local Mazda store is crazy on prices ; $246 for front PADS ..Akebonos from rockauto were just under $80 Any leads on good OEM pricing ?
|
# ? Nov 15, 2012 17:12 |
|
leica posted:Deal ain't gonna happen for now, waiting on an offer for my Vic and the guy that owns the wagon is farther away than I thought, so I'm not gonna go without cash in hand. Might not get this one, but I'm pretty sure I'm going to end up with a 6 wagon as I can't find anything better for my needs within in my budget. You must be close, I was looking at that exact wagon and ad for the past 3 weeks but ended up getting a 94 BMW e34 touring instead. There was also an 87 Volvo 240 dl wagon with a 5 speed in Port Charlotte a week or so ago but it was sold before I found the ad.
|
# ? Nov 16, 2012 19:19 |
|
e: Like I said, it's filthy from road grime. White cars: looks dirty quickly, cleans up quickly. Bonus: Why I'm driving an MPS and not my old 2L: Poor thing got sandwiched between a hilux and a GMC. Phy fucked around with this message at 10:07 on Nov 17, 2012 |
# ? Nov 17, 2012 06:59 |
|
Gorgeous!
|
# ? Nov 17, 2012 07:10 |
|
I rarely see the white ones driving around. That looks so nice!
|
# ? Nov 17, 2012 07:27 |
|
flacoman954 posted:Finally time for front brakes ..Just short of 115 K miles. My local Mazda store is crazy on prices ; $246 for front PADS ..Akebonos from rockauto were just under $80 Goddamn, mine didn't go half that long and that was with the rotors warping twice in there. The OEM pads are spendy as gently caress and I don't have anything better for you on pricing on those, but I went with Hawk HPS - a great deal less expensive, and FAR less dusty than the OEM. You do give up a very small amount of initial bite, just enough to notice. Alternatively, I've heard that the Hawk HP+ (or whatever the step up from HPS is) is even grippier than the OEM pads for about the same dust level. Also, yes, now about 500 miles in those mounts are still smoothing out more and more. The more they do, the more I like the car, since I wasn't expecting that much of an increase (I guess the culprit for me is the passenger mount) but even as they soften up I've noticed no change in how much better a job they do at holding the engine down.
|
# ? Nov 17, 2012 21:44 |
|
I drive 100 mi/day ,almost all highway,so this is typical for my cars. 29 MPG average also. Ordered the Akebono pads , hope the rotors aren't too far down; no pulsation . Did spark plugs again and went back to stock,made that little miss at idle go away.
|
# ? Nov 18, 2012 04:28 |
|
leica posted:Deal ain't gonna happen for now, waiting on an offer for my Vic and the guy that owns the wagon is farther away than I thought, so I'm not gonna go without cash in hand. Might not get this one, but I'm pretty sure I'm going to end up with a 6 wagon as I can't find anything better for my needs within in my budget. So I've been doing some looking and there's exactly 1 6 Wagon with a stick in a 300 mile radius of me while there's 28 MS6's in the same range. Who knew a 5speed Wagon variant would be the rarer model?
|
# ? Nov 18, 2012 06:34 |
|
Well Mazda did give up making the wagon in stick after a while.
|
# ? Nov 18, 2012 12:20 |
|
How practical is doing an MS6 swap on one of those? I assume the engine is straightforward. Does the underbody have the appropriate clearance for the AWD driveshaft, etc?
|
# ? Nov 18, 2012 20:04 |
|
I already posted this in the PYOR thread, but I picked this up yesterday off craigslist for a friend. '80 Mazda 626 5-speed. The thing is a loving time capsule that belongs in a museum. Always garaged and never seen rain. One of my friends is a huge Mazda nut and I bought it for him... he's going to have it shipped to St. Louis and put it on display inside his house. It has 90k miles on it, but you would never know it. toaster_pastry fucked around with this message at 01:31 on Nov 19, 2012 |
# ? Nov 19, 2012 01:27 |
|
Seat Safety Switch posted:How practical is doing an MS6 swap on one of those? I assume the engine is straightforward. Does the underbody have the appropriate clearance for the AWD driveshaft, etc? From what I gather it wouldn't take much work on the rear to do it. And there is a wrecked MS6 here locally...
|
# ? Nov 19, 2012 01:32 |
|
toaster_pastry posted:'80 Mazda 626 5-speed. The thing is a loving time capsule that belongs in a museum. Always garaged and never seen rain. One of my friends is a huge Mazda nut and I bought it for him... he's going to have it shipped to St. Louis and put it on display inside his house. Where are the original wheels though? Aren't those Konig Rewinds? Not that I'm complaining, because they look really good on it. Also, that's RWD, isn't it...
|
# ? Nov 19, 2012 17:49 |
|
Dropped the Akebonos on ; Initial bite is not as good as stock, might still be bedding in , I suspect. Funny thing ,there was about 2-3 mm of pad left!
|
# ? Nov 30, 2012 17:51 |
|
flacoman954 posted:Dropped the Akebonos on ; Initial bite is not as good as stock, might still be bedding in , I suspect. Funny thing ,there was about 2-3 mm of pad left! I need to do pads soon in my MS3, but keep hearing that about almost all aftermarket pads. I would hate to lose that initial bite, I love the stock brakes, but the OEM pads are way too expensive. Any recommendations?
|
# ? Nov 30, 2012 18:14 |
|
Hm, looks like the new 2013s have the option of the same touchscreen navi/pandora/HD radio/ipod control/track info etc system as the CX-5. No word if the unit is swappable into 2010-2012s. I'm really hoping so.
|
# ? Nov 30, 2012 21:37 |
|
If it is, I'm totally getting one.
|
# ? Nov 30, 2012 21:58 |
|
opengl128 posted:I need to do pads soon in my MS3, but keep hearing that about almost all aftermarket pads. I would hate to lose that initial bite, I love the stock brakes, but the OEM pads are way too expensive. Any recommendations? Hawk HP+ instead of HPS, supposedly.
|
# ? Nov 30, 2012 22:05 |
|
Cygni posted:Hm, looks like the new 2013s have the option of the same touchscreen navi/pandora/HD radio/ipod control/track info etc system as the CX-5. No word if the unit is swappable into 2010-2012s. I'm really hoping so. Man, I want that. Think you could call the dealership and ask and have them tell you?
|
# ? Nov 30, 2012 22:39 |
|
IOwnCalculus posted:Hawk HP+ instead of HPS, supposedly. I thought the Hawk pads were terrible?
|
# ? Nov 30, 2012 22:40 |
|
I have the HPS pads and love them - there's a tiny bit less bite than the OEM, but not enough to actually notice in practice (if you really want to hit the brakes, they're still just as much there) and there's a shitload less dust.
|
# ? Nov 30, 2012 22:43 |
|
IOwnCalculus posted:I have the HPS pads and love them - there's a tiny bit less bite than the OEM, but not enough to actually notice in practice (if you really want to hit the brakes, they're still just as much there) and there's a shitload less dust. Good to know. Just another to add to the buy pile. I got my first Christmas gift today, a $500 gift card that has "Car Stuff" written in sharpie across the front. Hello Corksport Turboback Exhaust!
|
# ? Nov 30, 2012 23:12 |
|
hunter x az posted:Man, I want that. Think you could call the dealership and ask and have them tell you? Judging by past dealings with my local dealers, you will ask a salesman and they won't even believe it exists, until you take them back to their storage lot and show them it in some cars fresh off the truck. This seriously happened to me when I was asking about some stuff on the 2012s. Theres some issues I can see right off the bat for pulling one of the touchscreens out. For example, the navi (at least in the CX-5) has a little SD card slot in a breakout box installed by the hood release. And I imagine the internet module probably has an antenna unit installed somewhere else in the car. All that said, I'll be the first to try a swap into my 11+Bose as soon as I can get my hands on one.
|
# ? Dec 1, 2012 03:04 |
|
Anyone have a recommendation for all-seasons for a Mazda 3 Sport? It's got the P205/50R17 88 tire size. It's for Ontario, so slush/snow are a consideration.
|
# ? Dec 1, 2012 03:43 |
|
Get proper snow tires.
|
# ? Dec 1, 2012 03:58 |
|
IOwnCalculus posted:Hawk HP+ instead of HPS, supposedly. HP+ have squealed like crazy on every car I've put them on. Never again will I do that. I'll grab a set of track pads and a set of street pads. Yes, they're decent pads that you can do track days with, but they're not a good street pad. They dust like crazy too.
|
# ? Dec 1, 2012 04:59 |
|
IOwnCalculus posted:I have the HPS pads and love them - there's a tiny bit less bite than the OEM, but not enough to actually notice in practice (if you really want to hit the brakes, they're still just as much there) and there's a shitload less dust. I guess I'll give em a whirl. Though I only need to do my rears right now, is it normal for them to wear out first? I have about 35K on my 08.5.
|
# ? Dec 1, 2012 05:12 |
|
Seconding the HPS pads. I don't have any experience with them on a MS3 but they've been excellent on my Focus. Might not be the same on a heavier car but they did just fine in a couple of autocrosses and during a HPDE.
|
# ? Dec 1, 2012 07:27 |
|
I'm looking into this new radio... I want to put it in my wife's 2010 3GX. Edit: the price new will be astronomical of course. SiB fucked around with this message at 21:06 on Dec 3, 2012 |
# ? Dec 3, 2012 17:37 |
|
My dad's first Miata, I slammed into the (closed) garage when I was 12. He followed it up by hitting a deer at 75mph, totaling it out. My mom's first MPV burned up in a garage fire. Her second skipped its timing, eating the engine. Her third (newer model) did the same, this engine replaced under warranty. My dad then decided things were too quiet with the family of Mazdas, so he bounced a deer off the hood of his second Miata. It soared over him, landing on his trunk and caving it in; not declared a total loss. I just drove this Speed 6 home from the dealer today. Am I going to die? Somebody fucked around with this message at 19:04 on Dec 4, 2012 |
# ? Dec 4, 2012 05:55 |
|
Revvik posted:My dad's first Miata, I slammed into the (closed) garage when I was 12. He followed it up by hitting a deer at 75mph, totaling it out. My mom's first MPV burned up in a garage fire. Her second skipped its timing, eating the engine. Her third (newer model) did the same, this engine replaced under warranty. Yes, but it'll be worth it.
|
# ? Dec 4, 2012 06:01 |
|
Totally. Welcome to the club!
|
# ? Dec 4, 2012 06:16 |
|
Revvik posted:Am I going to die? Yes, for not timg-ing your pics t Like that color, especially since as far as I know they never made the 6 in the Correct color (being either True Red or Velocity Red, take your pick)
|
# ? Dec 4, 2012 19:06 |
|
opengl128 posted:I need to do pads soon in my MS3, but keep hearing that about almost all aftermarket pads. I would hate to lose that initial bite, I love the stock brakes, but the OEM pads are way too expensive. Any recommendations? Quick update : The Akebono pads have gotten to about 90% of the initial bite and get even grabbier as you get a little heat into them. The OE pads have a EH hardness rating , the Akebonos are GG.
|
# ? Dec 4, 2012 19:46 |
|
flacoman954 posted:the Akebonos are GG. I love Akes.. they're so much better than stock.
|
# ? Dec 4, 2012 19:49 |
|
Revvik posted:My dad's first Miata, I slammed into the (closed) garage when I was 12. He followed it up by hitting a deer at 75mph, totaling it out. My mom's first MPV burned up in a garage fire. Her second skipped its timing, eating the engine. Her third (newer model) did the same, this engine replaced under warranty. Am I reading that sticker correct at $12699? If so wow, MS6s are getting down into a price range I can handle used wise. The last time I looked they were up near $20,000. Love the color! I think you will love it. Franco Caution fucked around with this message at 02:41 on Dec 5, 2012 |
# ? Dec 5, 2012 02:38 |
|
It ended up being $13k out the door, with 70k on the odometer. And yeah, this is really the best color. I'm 27 and needed a cosigner, so my dad offered with the catch that he had final say on what I bought. He said the only problem with this car is that he doesn't own it. He was partly right. The driver's side power window controls don't seem to work on any of the passenger windows, the paint is not even close to being perfect, and I have a hard time believing the stock exhaust is supposed to sound this... intimidating. But I was grinning ear to ear the entire 2 hour drive home. I'm going to give it six months until I start putting money into modification - plenty of time to learn about everything I would want to do with it. Edit: I was cross-shopping WRXs, Infiniti G35s, and some BMWs when someone reminded me that Mazda made more than Miatas. I really only regret not getting to test the MS3. Revvik fucked around with this message at 05:27 on Dec 5, 2012 |
# ? Dec 5, 2012 05:25 |
|
|
# ? May 10, 2024 13:24 |
|
Speed 6 is a great car. Welcome. I still prefer the speed3, but as a family man, maybe the 6 would have been a better option. haha
|
# ? Dec 5, 2012 05:33 |