|
Mandalay posted:How much is a cup at Intelli? "part" leads me to believe you spent $25 on a donut. $12. I also had a donut, a SO (Amigos de Buesaco, I think) macchiato, and a bag of Gichathaini Kenya.
|
# ? Jan 22, 2013 00:44 |
|
|
# ? May 9, 2024 18:42 |
|
That is....a lot of money for a cup of coffee. Guess it's worth it if it changes your life (unlike the similarly priced siphon at Blue Bottle)
|
# ? Jan 22, 2013 00:58 |
|
Mandalay posted:Ok, I'm about a week into my CCD and I'm wondering how much I need to agitate the grinds. Do I need to be doing something like the V60 here above? I'm worried that because my grinds go in at the bottom and I don't stir it too vigorously (since I broke my filter doing so), I'm not reaching the grinds at the bottom of the Clever. I've never used the CCD but as long as you don't have a ton of ground coffee floating on top I think you'd be fine. With the V60 this doesn't happen because I pre-wet the grounds and let it bloom for 30 seconds or so. I would just pour slowly at first and if you really want to agitate it I'd just jiggle the whole thing or use some sort of little wooden paddle. This is what I do with my french press and it seems to turn out fine.
|
# ? Jan 22, 2013 05:20 |
|
Mandalay posted:Ok, I'm about a week into my CCD and I'm wondering how much I need to agitate the grinds. Do I need to be doing something like the V60 here above? I'm worried that because my grinds go in at the bottom and I don't stir it too vigorously (since I broke my filter doing so), I'm not reaching the grinds at the bottom of the Clever. You don't need to do it vigorously. I just do like one sweep on the bottom and submerge any grounds floating on the top for the first stir. The second is really light. GrAviTy84 posted:Unlike Kopi Luwak and JBM (and Kona in some ways), the Geisha market is entirely for coffee super spergs. So, yeah, I think it's definitely worth trying at least once (for now) until it gets completely over blown and quality suffers because of it. It is absolutely worth trying. I'd probably have it again for $12.
|
# ? Jan 22, 2013 07:20 |
|
I'm thinking of putting together a small coffee kit to take to work, and looking at grinders on sweetmarias, would this be adequate for french press/pour over: http://www.sweetmarias.com/sweetmarias/grinders/electric-grinders/bodum-bistro-electric-mill.html I was thinking about getting a hand grinder, but if this does the job for less money and significantly less effort I'd rather go with that if I won't be able to taste a huge difference.
|
# ? Jan 22, 2013 14:52 |
|
I used a blade grinder for a while with a french press and I had so much more sludge than I do now with my Hario slim.
|
# ? Jan 22, 2013 15:34 |
|
Yeah, I really don't like using a blade grinder for french press. I used one at a friend's place and it leaves a boatload of sediment in the cup.
|
# ? Jan 22, 2013 17:35 |
|
What about for a pour-over? For a french press, does it affect the taste at all, or is really just the crap at the bottom of your cup?
|
# ? Jan 22, 2013 18:17 |
|
The Third Man posted:What about for a pour-over? For a french press, does it affect the taste at all, or is really just the crap at the bottom of your cup? You want something that will grind uniformly with a pourover. Get something with burrs. I wouldn't dick around with hand grinders. Get a baratza encore refurb right now for $85. Fyi guys, encore refurbs now on sale again.
|
# ? Jan 22, 2013 18:21 |
|
The Third Man posted:What about for a pour-over? For a french press, does it affect the taste at all, or is really just the crap at the bottom of your cup? Well, the crap at the bottom of the cup negatively affects taste in terms of bitterness. I certainly perceived it that way, at least.
|
# ? Jan 22, 2013 18:24 |
|
nm posted:Fyi guys, encore refurbs now on sale again. If I already have a Hario Slim, will a Baratza Encore offer me anything other than convenience and a weaker grinding arm?
|
# ? Jan 22, 2013 18:33 |
|
GaylordButts posted:If I already have a Hario Slim, will a Baratza Encore offer me anything other than convenience and a weaker grinding arm? Yeah, it has a much more consistent grind. I went from a slim to a maestro plus, worth every penny. A fact I'm about to be reminded of as I just broke the hopper on my mp (dropped) and have to get a new one. The encore can also go pretty fine apparently if you want to try other options.
|
# ? Jan 22, 2013 18:37 |
|
nm posted:Fyi guys, encore refurbs now on sale again. Sold. Thanks. Bodum Bistro, gettin' replaced in record time
|
# ? Jan 22, 2013 19:31 |
|
The Third Man posted:What about for a pour-over? For a french press, does it affect the taste at all, or is really just the crap at the bottom of your cup? For coffee extraction there are compounds in the bean that contribute off tastes and a bad bitterness. You don't want everything in the bean. There's a good chart in the OP showing this. Anyway, when you start to extract the unwanted stuff you get a cup that is considered "overextracted". We're all probably pretty familiar with that bitter burnt cardboard taste of awful office/hotel/church/conference coffee. That's overextraction. What does this have to do with grinder? Coffee spergs like to rant on and on about grind consistency. All this means is that we want as little variation is coffee granule size from granule to granule. This translates into even/consistent extraction of the bulk of the coffee and therefore we are more able to avoid over extraction. It's especially bad for press pot because of the aforementioned sludgecup. It will still definitely affect pourover. It will affect every brew method. I use a hand grinder for travel coffee with pourover or sometimes aeropress. It's not optimal, there's some play in the grinder shaft so I wouldn't recommend it as a dedicated everyday use grinder, but it's better than a blade grinder. The Baratza Encore/Maestro Refurbs and the Capresso Infinity are the cheapest grinders recommended for daily use duty.
|
# ? Jan 22, 2013 19:41 |
|
Mandalay posted:Sold. Thanks. Bodum Bistro, gettin' replaced in record time Guess there was only 1. They're sold out now. You're lucky. Enjoy, even the cheap grinders they make are great.
|
# ? Jan 22, 2013 19:52 |
|
nm posted:Guess there was only 1. They're sold out now. Thanks man. May there be no stop signs in your roundabouts. EDIT: Is it normal for there to be a seam between the CCD and its filter? Mandalay fucked around with this message at 20:11 on Jan 22, 2013 |
# ? Jan 22, 2013 20:09 |
|
No. Are you wearing Allen Edmonds Delrays?
|
# ? Jan 22, 2013 20:29 |
|
Mandalay posted:EDIT: Is it normal for there to be a seam between the CCD and its filter? I usually fold and crease the seamed edges, the one alone the side and the one along the bottom, before putting into any filtercone. Should fix your problem.
|
# ? Jan 22, 2013 20:36 |
|
^^^ e: I'll try that thanksnm posted:No. Can't seem to get the dry filter to conform to the CCD circle without dampening it first, which creates an unsightly pool of water at the bottom. And these are Waltons, good call on noticing the AE blucher.
|
# ? Jan 22, 2013 20:41 |
|
Mandalay posted:Can't seem to get the dry filter to conform to the CCD circle without dampening it first, which creates an unsightly pool of water at the bottom. You should be washing paper filters (twice) with hot water to remove paper fines from manufacturing. I will usually crease filter, put in filtercone, add water, swirl, dump (you can pour it out the top, wetting the filter when it's in the cone will make it stick to the filtercone), add more water swirl, dump, then add the ground coffee and continue. Same with Aeropress.
|
# ? Jan 22, 2013 20:44 |
|
Mandalay posted:^^^ e: I'll try that thanks I always wet it in the CCD. I put about a cup of boiling water in with the filer and keep it there for a bit. Warms up the equipment. I then drain it into my coffee cup and warm up my coffee cupwhile brewing. It warms things up (keeps temps up for brewing) and reduces paper taste. I am a big AE fan. They make a lot of split toes, hard to tell apart. I'm wearing my cream and brown Broadstreets because I'm a criminal defense attorney, which means basically the louder the better.
|
# ? Jan 22, 2013 20:47 |
|
The Third Man posted:I'm thinking of putting together a small coffee kit to take to work, and looking at grinders on sweetmarias, would this be adequate for french press/pour over: http://www.sweetmarias.com/sweetmarias/grinders/electric-grinders/bodum-bistro-electric-mill.html If you're doing a coarse grind for the French Press it should take like 30 seconds to manually grind for one cup. You can do it while waiting for water to boil.
|
# ? Jan 22, 2013 21:31 |
|
nm posted:I'm wearing my cream and brown Broadstreets because I'm a criminal defense attorney, which means basically the louder the better. This sounds terrifying to someone who's never been in a courthouse btw On topic: I know Orphan Espresso sells bearing mods for the Kyocero/skerton grinder (not the minislim) that supposedly makes the wobble much better, but I haven't tried it myself. Also, the encore is awesome; I brought back the refurb I scored thanks to this thread back to my folks in Korea and they love it. Unfortunately I haven't been able to get another so I "had" to get myself a virtuoso refurb in order to get a nice electric grinder. Is the Virtuoso with preciso burrs good enough yet for espresso, or does it still lack the fine adjustment needed for that? It's fine for me if it isn't, since I already enjoy pourover and press coffee and don't want to spend money on espresso gear until I can get it right.
|
# ? Jan 22, 2013 22:50 |
|
Archer2338 posted:This sounds terrifying to someone who's never been in a courthouse btw Don't drop your grinders people. Thankfully, it just broke my hopper (which is $10), but I have to use by crappy hario slim for a week or so. So much play.
|
# ? Jan 23, 2013 03:25 |
|
Jesus, $12 a cup. I thought AUD$5.50 for a Colombia Geisha here was a bit steep. Content: Jamaica Blue Mountain RSW Estate peaberry in my new 1-cup glass V60. Extremely impressed with how my Mazzer Mini can switch between drip and espresso grinds without freaking out like my Baratza used to.
|
# ? Jan 23, 2013 06:21 |
|
Shouting Melon posted:Jesus, $12 a cup. I thought AUD$5.50 for a Colombia Geisha here was a bit steep. Intelligentsia isn't exactly cheap, even with real stuff.
|
# ? Jan 23, 2013 06:35 |
|
Archer2338 posted:On topic: I know Orphan Espresso sells bearing mods for the Kyocero/skerton grinder (not the minislim) that supposedly makes the wobble much better, but I haven't tried it myself. Has anyone here tried this? I like my Skerton for travel, but it'd be really nice to cut down on the fines.
|
# ? Jan 23, 2013 09:27 |
|
nm posted:I always wet it in the CCD. I put about a cup of boiling water in with the filer and keep it there for a bit. Warms up the equipment. Yeah, none of this is happening because the nearest sink involves going through a blood draw station with syringes and all kinds of human samples. Gravity's simple suggestion to fold helped. Had a call and accidentally brewed in the CCD for 12 minutes today. Still tastes OK--not enough to throw it out. Good use of these Guatemala Santa Clara beans that I disliked on the Aeropress (from Stumptown). AE Chat: my fav AE shoe has to be their boot, the Long Branch. Took it to Asia for two weeks as my only footwear and drat if it doesn't look good while being fairly rugged in the snow/countryside/etc.
|
# ? Jan 23, 2013 18:00 |
|
So I think this might have been asked before but I can't find it. Does anyone have any opinions on electric burr grinders available in the UK? (preferably on amazon as I got a £10 voucher for christmas!). Even though it'd be nice to be able to grind espresso I don't think I can really afford to splash out on something that can do it at this point in time, so I just need to be able to grind for pour over and press coffee. This is one I've been looking at for a while and seems quite affordable: http://www.amazon.co.uk/gp/product/...&pf_rd_i=468294 There's also Dualit, Bodum and Cuisinart ones that I've seen on there.
|
# ? Jan 23, 2013 21:13 |
|
Mr N posted:So I think this might have been asked before but I can't find it. Does anyone have any opinions on electric burr grinders available in the UK? (preferably on amazon as I got a £10 voucher for christmas!). Even though it'd be nice to be able to grind espresso I don't think I can really afford to splash out on something that can do it at this point in time, so I just need to be able to grind for pour over and press coffee. I can't comment on any of the others, but the Cuisinart is poo poo. Don't buy it.
|
# ? Jan 23, 2013 21:16 |
|
Mr. Glass posted:I can't comment on any of the others, but the Cuisinart is poo poo. Don't buy it. Oh dear, what problems did you have with it?
|
# ? Jan 23, 2013 21:43 |
|
Mr. Glass posted:I can't comment on any of the others, but the Cuisinart is poo poo. Don't buy it. I used the linked Cuisinart for a year or two. I'm not claiming that it's an amazing grinder but It was fine for French press, aeropress, and drip. It does leave some fines but you can kind of scoop around them for the most part. My biggest complaints were that it was a bit of a pain to clean and that the collection chamber seemed to suffer from electrostatic cling so you have to completely brush it out every time you use it. That said, if you can get it for a good price it seemed perfectly acceptable.
|
# ? Jan 23, 2013 22:00 |
|
Mr N posted:Oh dear, what problems did you have with it? Uneven grind (worse than a good blade grinder). Static electricity everywhere. Impossible to get a coarse enough grind for a french press without producing 50% dust that clogs the filter. Impossible to get an even enough grind for espresso. I'd take a Bodum blade mill over it any day. It looks like you can get them in the UK: http://www.amazon.co.uk/dp/B003WT15TQ/. In that price range, I might also suggest a Hario hand-crank mill, if you can get those in the UK.
|
# ? Jan 23, 2013 22:09 |
|
I have a question. My wife wants to use the Aeropress to make "lattes". Basically just make a small amount of the coffee and then dump the milk in it. I'm just wondering what the best way to heat up the Milk would be? We don't have anything other than an old drip machine and the new aeropress I bought last week and I have 0 desire to make a "latte" for myself. Would it be worth it to get some sort of cheap-ish espresso style maker and just use the steamer it comes with to heat up the milk for her drinks? or is just filling a mug and putting in the microwave for a few minutes ok?
|
# ? Jan 23, 2013 23:46 |
|
smokmnky posted:I have a question. My wife wants to use the Aeropress to make "lattes". Basically just make a small amount of the coffee and then dump the milk in it. I'm just wondering what the best way to heat up the Milk would be? We don't have anything other than an old drip machine and the new aeropress I bought last week and I have 0 desire to make a "latte" for myself. Nuke it in a press pot then use the plunger to rapidly froth it. https://www.youtube.com/watch?v=aOmeJ9q4xX0
|
# ? Jan 23, 2013 23:51 |
|
If you just nuke the milk without frothing it you can call it a cafe au lait.
|
# ? Jan 24, 2013 00:05 |
|
You can make "decent" microfoam in a pinch using a Bodum turbo whipper thingie on some milk in a mug - then tossing it into the microwave for 30 seconds - then pour your hot coffee in.
|
# ? Jan 24, 2013 00:23 |
|
Baratza has refurbished grinders back in stock. I ordered the last Virtuoso "with Preciso burr" they had, although the comparison sheet seems to indicate that the Virtuoso and Preciso use the same burr. Maybe I threw away , but I'm so tired of the sludge in my press pot from a lovely Cuisinart grinder that I just don't care.
|
# ? Jan 24, 2013 08:12 |
|
Loucks posted:Baratza has refurbished grinders back in stock. I ordered the last Virtuoso "with Preciso burr" they had, although the comparison sheet seems to indicate that the Virtuoso and Preciso use the same burr. Maybe I threw away , but I'm so tired of the sludge in my press pot from a lovely Cuisinart grinder that I just don't care. I think the Virtuoso with preciso burr distinguishes between a newer version of the virtuoso which uses the preciso burrs and an older version which does not.
|
# ? Jan 24, 2013 08:20 |
|
|
# ? May 9, 2024 18:42 |
|
gwrtheyrn posted:I think the Virtuoso with preciso burr distinguishes between a newer version of the virtuoso which uses the preciso burrs and an older version which does not. I see. Then I feel even better about my decision. The Vario-W is what I really want, but can't justify the price. I imagine any Baratza grinds at a more consistent speed than my Cuisinart though, which should minimize the guesswork.
|
# ? Jan 24, 2013 08:29 |