|
Well the SV decided it had enough of its chain-and-sprocket setup and kicked the chain off a section of almost no teeth. Rear stand hadn't gotten here yet, so I just had it towed to the shop to install the new chain and sprockets. Look and feel 4000x better than they were, way smoother. Also sealed up the front spark-plug so it doesn't flood in the wonderful winter Seattle commute. Woo. Next dry day is oil change day.
|
# ? Sep 30, 2013 03:03 |
|
|
# ? May 14, 2024 06:15 |
|
Looked forlornly at it under its cover. Hasn't really stopped raining here for weeks.
|
# ? Sep 30, 2013 12:16 |
|
Late post from yesterday. Touched up a chip on the fairing from the previous factory warning sticker removal fiasco. Buffed the touch up paint and clearcoat down and it's hard to notice unless you knew the damage was there before hand. Washed the bike down and cleaned my chain. Then I brought it home a friend! Wife got a 2003 Ninja 250 that only has 4000 miles on it. It's in great shape. The PO bought it from some college kid that grabbed a handful of front break and gently laid it down. Slight scuff on the fairing and exhaust but otherwise flawless. Cleaned the chain on that too because it was pitch black and looked like it had never seen degreaser. All in all good day.
|
# ? Sep 30, 2013 14:35 |
|
Ya know what I did to my ride? I put gas in the fucker, I rode it until it needed more gas, I put more gas in, and I rode it some more. That's loving it. No fixing, adjustments, or tweaks, no putting poo poo on or taking poo poo off, no worries, no work. It seems like forever since I've had a day like that where I could just throw a leg over and get lost... and it was magnificent.
|
# ? Sep 30, 2013 16:30 |
|
Feels good, doesn't it?
|
# ? Sep 30, 2013 16:39 |
|
The_Raven posted:Ya know what I did to my ride? I put gas in the fucker, I rode it until it needed more gas, I put more gas in, and I rode it some more. That's loving it. No fixing, adjustments, or tweaks, no putting poo poo on or taking poo poo off, no worries, no work. It seems like forever since I've had a day like that where I could just throw a leg over and get lost... and it was magnificent. Wait you can ride these things?
|
# ? Sep 30, 2013 17:04 |
|
Put mine in storage , won't see it again until April.
|
# ? Sep 30, 2013 22:05 |
|
Kind of a lovely pic, but I put a cafe style seat on my 78 CB750F. I really like the look of the lines and colors (especially with the exhaust wrap), only thing now is to remove the axle-mounted brake light/plate bracket and put one on the cowl, plus turn signals. It's street legal as-is in the meantime though. A huge improvement from the $500 fixer upper I first bought in May:
|
# ? Sep 30, 2013 22:17 |
|
FireTora posted:Put mine in storage , won't see it again until April. I rode in this bike for three years solid (no car) in this place. Yes, even on the 4 degree F days. You pansy. (don't do this I should be dead oh god)
|
# ? Sep 30, 2013 22:23 |
|
Commuting before dawn: Having to chip the ice off your gauges just so you can read them
|
# ? Oct 1, 2013 02:12 |
|
I was riding home yesterday afternoon and someone decided to pull out in front of me causing me to downshift and brake fairly hard When I released the clutch lever I heard a loud Clang/Bang and assumed it was a backfire because the bike was still fairly cold I got home and gave the rear end a quick once over to check nothing was broken and I found other than the chain being a little loose, two of the bolts on the rear sprocket were loose One of the bolts was actually smaller than the others, so no idea what's going on there... All bolts now tightened up and I'll take the bike to be checked out by my mechanic some time this week
|
# ? Oct 1, 2013 08:36 |
|
Geirskogul posted:I rode in this bike for three years solid (no car) in this place. Yes, even on the 4 degree F days. You pansy. (don't do this I should be dead oh god) poo poo, that's warm. I'm in the military in Anchorage. They won't let me ride once they ban it on post for the winter in about 2 weeks. Otherwise I'd get some heated gear and studded tires and rock out all year round.
|
# ? Oct 1, 2013 18:34 |
|
After 2 years and 18000 miles or so of ownership I replaced the brake pads on my 99 VFR. I can't tell if Honda stupidly decided to use crappy pad retaining screws that aren't meant to come out or are meant to be hammered to hell with an impact driver. I was wondering what the squeaking noise was under breaking and the pads were decidedly thin :v Newer pad on top.
|
# ? Oct 2, 2013 01:41 |
|
kenny powerzzz posted:I'm not sure about 536, but 78 and triple nickle are a blast. Didn't get to 536, but yea, 555, 78 and 278 were all great. 56 however, tastes like crap, made my bike spark and is much tougher than my ankle. In keeping with the thread, I hobbled out on the crutches and looked at the broken plastic and ground down hand guard, it may be a cheap Emgo, but it did it's job well.
|
# ? Oct 2, 2013 02:41 |
|
I priced out the parts to fix up my carbs. $650. But at least I'll have a nice running bike again.
|
# ? Oct 2, 2013 04:15 |
|
Xovaan posted:I priced out the parts to fix up my carbs. $650. How many new sets of carbs do you think your bike needs to run?
|
# ? Oct 2, 2013 05:02 |
|
Xovaan posted:I priced out the parts to fix up my carbs. $650.
|
# ? Oct 2, 2013 05:17 |
|
At least seven at this rate Previous owners didn't change out the gaskets on and around the float bowls so I might as well have it replaced while in there since I'm having the bike tuned after repairs. OEM is $60 x 4 = $260 after tax. Then the Mikuni "needle jet" is a $30 part, of which I need four (the reason the bike is running rich is because the needle wore through this tube) so that's $130 right there. And I'm converting the bike to use stick coils because I haven't done anything interesting to the bike in a while so that's $100 for the Hayabusa coils and harness assembly. Add in shop labor for installation and tuning since I have zero time to do anything now. They quoted me at 2.5 hours to install and tune the bike with a wideband. They did say that's a pretty high estimate and should be less than that but it still comes out to a decent coin. I'm just trying to do as much preventative maintenance as possible since I wanna start commuting via bike again and don't wanna have to go back into my carbs if something else is already on the verge of needing replacement. In other news, I did manage to fix my girlfriend's 250. She said it was puttering and it died on her and the tank *looked* like it had gas but I guess it didn't so I put gas in it and there you go, fixed bike. I'm a loving expert over here
|
# ? Oct 2, 2013 05:24 |
|
Why can't you just buy rebuild kits? Also I've never heard of a needle jet needing replacing - how did you come to this conclusion? Did someone take a drill to them?
|
# ? Oct 2, 2013 05:35 |
|
Xovaan posted:Pricepoints
|
# ? Oct 2, 2013 05:48 |
Xovaan posted:At least seven at this rate But carbs, you see, are just as reliable as EFI and if you just maintain the bike conscientiously like xovaan does then...wait... I have carbs ohgodkillme.
|
|
# ? Oct 2, 2013 05:54 |
|
n8r posted:Why can't you just buy rebuild kits? Also I've never heard of a needle jet needing replacing - how did you come to this conclusion? Did someone take a drill to them? They'll install and tune for the same price as me getting a tune anywhere else, so I might as well just have them do it since they're twice as fast and both people have the same engine and mods that I do. Having that kind of peace of mind is worth it in my opinion. Basically the tube (called a needle jet, opposite of a jet needle) is rubbed against by the large needle since it's spring loaded. Vibration over time saws through this just enough to cause a richer mixture. Rejetting to stock will fix this since the needle is a larger diameter but doesn't remedy the original problem, which is why it often goes misdiagnosed and ultimately unnoticed. Here's to being on the road again and carbs
|
# ? Oct 2, 2013 08:04 |
|
infraboy posted:I can't tell if Honda stupidly decided to use crappy pad retaining screws that aren't meant to come out or are meant to be hammered to hell with an impact driver. Yeah, that design really sucks. I had a hell of a time with the pad retaining screws on my 93 transalp. Front brake had 2 of them. Soaked them multiple times over a week, but still needed impact driver + heat to get them loose. All in all, just a really crappy design.
|
# ? Oct 2, 2013 08:19 |
|
You're just supposed to throw out the assembly and get a new one at your local Honda dealer.
|
# ? Oct 2, 2013 13:00 |
|
I've heard of the needle jets wearing on FZR600s (according to the few FZR sites I've visited) so it is apparently a thing. I never heard of it on any other type of bike so it must be pretty drat rare.
|
# ? Oct 2, 2013 20:23 |
|
Needle jets wear down fast with a lot of highway riding. They're held up and vibrate back and forth for hours.
|
# ? Oct 2, 2013 20:35 |
|
Geirskogul posted:Needle jets wear down fast with a lot of highway riding. They're held up and vibrate back and forth for hours. So, how about an aircraft carb? Those things get stuck at constant throttle forever and don't wear out particularly. Is there a reason not to use updraft carbs on a bike (besides having to set the mixture by hand all the time)? edit: of course: only one circuit. Sucks at anything except WOT or close to it. Screw all carbs forever. EFI for life.
|
# ? Oct 3, 2013 01:33 |
|
babyeatingpsychopath posted:So, how about an aircraft carb? Those things get stuck at constant throttle forever and don't wear out particularly. Is there a reason not to use updraft carbs on a bike (besides having to set the mixture by hand all the time)? Motorcycle carb needles hang fairly freely, unlike larger automotive needles. Different systems.
|
# ? Oct 3, 2013 01:46 |
|
Broke the front left blinker. . Was getting off the bike at Walmart and my pant leg caught the pillion handle and the momentum of me turning and only one leg on the ground, with a full backpack, I lost all balance and I tumbled over. It landed on me kinda, 2 people jumped over to help but I couldn't tell if they caught it or not. Broken blinker, scratched mirror plastic, and that's it. There's a tiny scuff on the tank but it was rubbing off. Brand new, CBR500R, owned 90 days. It was bound to happen, thankfully it wasn't any worse.
|
# ? Oct 3, 2013 02:27 |
babyeatingpsychopath posted:So, how about an aircraft carb? Those things get stuck at constant throttle forever and don't wear out particularly. Is there a reason not to use updraft carbs on a bike (besides having to set the mixture by hand all the time)? Carbs: letting people down since the battle of Britain.
|
|
# ? Oct 3, 2013 03:30 |
|
Virtually all motorcycle carbs have a slide with a needle, quite a few other types of engines have no slides or needles. Many just have a butterfly.
|
# ? Oct 3, 2013 03:39 |
|
Geirskogul posted:Needle jets wear down fast with a lot of highway riding. They're held up and vibrate back and forth for hours. No they don't. It's large intake pressure fluctuations that's hard on them. Big bore singles at idle or low RPMs wears them down pretty fast, while highway riding with a pretty constant intake pressure won't wear much on the emulsion tubes.
|
# ? Oct 3, 2013 06:34 |
|
Sir Cornelius posted:No they don't. It's large intake pressure fluctuations that's hard on them. Big bore singles at idle or low RPMs wears them down pretty fast, while highway riding with a pretty constant intake pressure won't wear much on the emulsion tubes. Xovaan posted:Took my bike to a shop today. Poway Motorcycles is loving legit though. The service counter guy had a Katana with a GSXR1100 motor with the same bore kit my bike has and the tech races a 400lb fuel injected ZZR1200 pushing 160whp/100tq but ANYWAY From a few pages ago. Yes, constant use and pressure wears them down, but free hanging needle jets (they always have quite a bit of sideways play) do wear down over many highway miles. I have friends with 100K+ Goldwings that have experienced similar.
|
# ? Oct 3, 2013 06:39 |
|
Geirskogul posted:From a few pages ago. Yes, constant use and pressure wears them down, but free hanging needle jets (they always have quite a bit of sideways play) do wear down over many highway miles. I have friends with 100K+ Goldwings that have experienced similar. I don't see where you contradict what I said. 100K miles is pretty low wear. On a large thumper that mostly experience low RPMs you'll see similar wear at 10K miles.
|
# ? Oct 3, 2013 06:46 |
|
Slavvy posted:Carbs: letting people down since the battle of Britain. And yet without carbed Merlin engines we'd never have had Miss Shilling's Orifice, which so many brave young men of the RAF experienced and were grateful for.
|
# ? Oct 3, 2013 11:01 |
|
goddamnedtwisto posted:And yet without carbed Merlin engines we'd never have had Miss Shilling's Orifice, which so many brave young men of the RAF experienced and were grateful for. And what a magnificient orifice it was E: I didn't do anything to my ride(s) today, but I did mod my helmet. I added a couple of strips of black electrical tape to the top of my visor. It made a huge difference in comfort now that I'm not completely blinded by the low-hanging October sun anymore. KozmoNaut fucked around with this message at 16:33 on Oct 3, 2013 |
# ? Oct 3, 2013 12:13 |
|
http://www.factorypro.com/tech/needle_jet_wear.html So yeah, I guess this is common. I'm just surprised most rejet kits don't come with emulsion tubes or tell people to replace them too.
|
# ? Oct 4, 2013 00:11 |
|
Put brand new sprockets and a fancy gold DID x-ring chain on the DRZ today with the help of a buddy. Thankfully he was there, because my cooler makes a pretty lovely dirt bike stand. No real damage due to blowing up the previous chain other than a small gouge in the case right where the splined clutch rod goes down and a cracked plastic countershaft cover. Time for a fancy Zeta aluminum unit I guess. I definitely lucked out though, looking at that little gouge that could have been the end of the season for me really makes me thankful.
|
# ? Oct 4, 2013 00:31 |
Mounted up a new Dunlop BT016 on the rear, it was past time. They're supposed to be good tires for the money, guess I'll find out. The previous Michelin Power Pure was damned good but I can't find them anymore. I got somewhere around 5000 miles on it.
|
|
# ? Oct 4, 2013 01:32 |
|
|
# ? May 14, 2024 06:15 |
|
Slavvy posted:But carbs, you see, are just as reliable as EFI and if you just maintain the bike conscientiously like xovaan does then...wait... The trick, in my book, is less than three. My XS750's carb refresh has been on indefinite hold for reasons I cannot fathom... I should put those two last pieces into them, bench sync them, and get that bike going/sold. I could use sold bike money for a weber side draft intake set up or an engine for that stupid rotary nightmare I just bought.
|
# ? Oct 4, 2013 02:09 |