|
That's actually the first part of my planned modding section. It's just, uh, I'm really busy at the moment. Anyways I don't think the moustache on the Turn A will have safety nubs, but if it does the process isn't that hard. Use your cutters to take off as much as you can, then sand it smooth. It doesn't have to be perfect, you just have to take those thick bits off. EDIT: Now that I have HG V2, I actually have something I can build for the guide. But aaaaah no free time. BlitzBlast fucked around with this message at 19:03 on Feb 4, 2014 |
# ? Feb 4, 2014 18:59 |
|
|
# ? May 28, 2024 15:28 |
|
If you've got experience with files, those can be used to rough the final shape in, too.
|
# ? Feb 4, 2014 21:25 |
|
S-Alpha posted:I'm actually really curious to see how this'll look. If it looks good, I may at some point on the future put a silver backing on my Banshee's green frame so it pops a bit more amongst the black plastic.
|
# ? Feb 4, 2014 21:41 |
|
muike posted:If you've got experience with files, those can be used to rough the final shape in, too. I did this for the safety nub on the Fenice's V-fin, worked like a charm.
|
# ? Feb 4, 2014 21:49 |
|
The Caletvwlch Sword is apparently getting a Build Fighters incarnation as a customizable accessory. Between the detachable parts and the replacement head fin piece, anyone else reminded of Advent Children? http://gundamguy.blogspot.com.au/2013/12/hobby-japan-may-exclusive-gundam-build.html
|
# ? Feb 5, 2014 02:20 |
|
Online exclusive SUMO. Get hyped. http://gundamguy.blogspot.com/2014/02/p-bandai-online-hobby-shop-exclusive_4.html EDIT: False alarm, it looks like it's the NG ones, not an addition to HGCC. Damnation.
|
# ? Feb 5, 2014 04:32 |
|
TARDISman posted:Online exclusive SUMO. Get hyped. If MG Turn X wasn't a thing then you'd think Bandai hated Turn A. gently caress wasting my money on the P-Bandai moonlight butterfly wings - China will have those copied and blown up to MG size in two months tops. Edit: \/\/\/ - at least they will be appropriately priced, and will still look better than anything I could hope to scratch build. TaurusOxford fucked around with this message at 05:37 on Feb 5, 2014 |
# ? Feb 5, 2014 04:59 |
|
The Chinese bootleg effect parts always look worse though.TaurusOxford posted:Edit: \/\/\/ - at least they will be appropriately priced, and will still look better than anything I could hope to scratch build. They almost never throw in bonuses like special ABs or waterslides, are almost universally lower quality, and have much worse QC. Sorry dude, but Bandai's stuff is usually appropriately priced too. It's just that you live outside of Japan and have to pay shipping + markup. Bootlegs tend to have a bunch of first print bonuses that will screw you over just like Bandai's web exclusives too. BlitzBlast fucked around with this message at 06:08 on Feb 5, 2014 |
# ? Feb 5, 2014 05:04 |
|
Has anyone ever had troubles cancelling orders from Robot4Less before?
|
# ? Feb 5, 2014 17:43 |
|
TARDISman posted:Has anyone ever had troubles cancelling orders from Robot4Less before? I went straight to a paypal dispute with them. I don't know where I read it (another site likely) but they are a real poo poo-show operation. I think I started checking around because I had an issue with them and I didn't know if it was just me or not.
|
# ? Feb 5, 2014 17:56 |
|
R4L's name is a giant lie anyways so I'm honestly not sure why anybody buys from them. The best explanation somebody could give me was that they were better for single purchases compared to Hobbywave, but now that Amazon has really kicked it into high gear there's not much point to dealing with them directly. Model Grade is way better anyways. i am a shameless shill EDIT: You know I said that offhand because my club is partnered with them, but holy poo poo they really are. Compare the MG 00S/G on Model Grade and R4L. There's an almost $20 difference. BlitzBlast fucked around with this message at 18:03 on Feb 5, 2014 |
# ? Feb 5, 2014 17:59 |
|
BlitzBlast posted:R4L's name is a giant lie anyways so I'm honestly not sure why anybody buys from them. The best explanation somebody could give me was that they were better for single purchases compared to Hobbywave, but now that Amazon has really kicked it into high gear there's not much point to dealing with them directly. I also like Model Grade.... ALOT. They were at SacAnime and while other booths were gouging they weren't. I'm thinking of moving to Sacramento and when/if I do I'm going to take advantage of their free local deliveries.
|
# ? Feb 5, 2014 18:27 |
|
R4L used to be good. They had a pretty constant 20% off coupon that stacked and great customer service. Now they have neither and a completely different staff. Place is crap now.
|
# ? Feb 5, 2014 19:26 |
|
One thing I hate about living in MN, the nearest hobby shop for me got the hell out of Gunpla right around 00's release so outside of going to downtown my only options for local shops are conventions, which gouge the hell out of prices. 80 bucks for MG Infinite Justice is a goddamn crime.
|
# ? Feb 5, 2014 19:26 |
|
That's around average for my hobby shop Nu is $120, PG 00 Raiser was $350 something, FA Unicorn was selling for $150... I didn't even look when there was a titanium coat Banshee in stock. Their HGs are usually okay priced though, but I much prefer building MGs to HGs. Even paying for shipping to here it's generally cheaper for me to buy online, especially with 1999s / HLJs constant discount on gunpla.
|
# ? Feb 5, 2014 21:31 |
|
My local Hobbytown hasn't had anymore stock than 5 SEED HG's for the last 2 months. It's not even main suits, just stuff like the Calamity.
|
# ? Feb 5, 2014 21:56 |
|
I don't even have a local hobby shop. This is currently an issue because I seem to have misplaced all my panel line markers, and to a lesser extent, my airbrush.
|
# ? Feb 5, 2014 22:31 |
|
I have a hobby shop that has like 4-5 gunpla in stock at any given point. Usually a piss poor selection, and with a rather unnerving penchant for Exias, but I'd rather go there than go the the anime shop that we have in town and then have to take a shower when I get back. They both gouge to poo poo though. 110 bucks for a Sinanju Stein.
|
# ? Feb 5, 2014 23:22 |
|
S-Alpha posted:I have a hobby shop that has like 4-5 gunpla in stock at any given point. Usually a piss poor selection, and with a rather unnerving penchant for Exias, but I'd rather go there than go the the anime shop that we have in town and then have to take a shower when I get back. Yeah I love supporting my local Hobbytown, but they are the same way. The only good deal we ever got was the MG RX-78 3.0 when it first released for 50.00 plus tax.
|
# ? Feb 6, 2014 01:34 |
|
S-Alpha posted:I have a hobby shop that has like 4-5 gunpla in stock at any given point. Usually a piss poor selection, and with a rather unnerving penchant for Exias, but I'd rather go there than go the the anime shop that we have in town and then have to take a shower when I get back. I've got four local stores that stock Gunpla to various degrees . The only problem I have is that the big hobby store seems to be favouring AGE kits over SEED and 00 ones at the moment, and they don't have any Build Fighters stuff at all.
|
# ? Feb 6, 2014 01:40 |
|
If they have a G-Xiphos you should totally grab it
|
# ? Feb 6, 2014 01:44 |
|
muike posted:If they have a G-Xiphos you should totally grab it I only buy a couple kits a year due to storage space, and for the moment the only current-release ones I'm after are a Kampfer Amazing and an Overflag or Graham's Custom FLAG (they're pretty much the same kit and I like the massive fuckoff rifle over the standard one, so it's just a case of whichever I find first). After that it's a wait for the Exia RG in April, as well as the inevitable HGCE Buster and HGAC HeavyArms.
|
# ? Feb 6, 2014 01:52 |
|
S-Alpha posted:
Ha. You think that's bad? Try this. No one in my small city carries gunpla. One time the local comic book store got a couple of kits in. Guess how much he wanted for an mg sinanju stein? $175 He said his prices were "fair."
|
# ? Feb 6, 2014 02:58 |
|
Man, I don't think I've really seen anything over 7000 yen in Japan.
|
# ? Feb 6, 2014 05:53 |
|
MG The O. Not having to deal with shipping and mark ups makes everything look ridiculously cheap in Japan. Like, the blue MG FA Gundam that's coming out? 5400 yen in Japan. America? GG Infinite's asking for $80. Incidentally, MG FA Gundam is 5000 yen in Japan. So no ludicrous Bandai markup or anything.
|
# ? Feb 6, 2014 06:06 |
|
GSAM has the HCM-Pro Triple Dom "Jet Stream Attack" set on sale this week for a substantial discount, if anyone's interested in that sort of thing.
|
# ? Feb 6, 2014 06:25 |
|
I think the most I over paid for a kit at Hobbytown was around 120 for my MG Full Armor Unicorn, when it was available on Amazon for like 90 shipped. Outside of that, there was a local convention selling the MG Sandrock for 80, which I turned down. Besides that price gouging isn't too terrible here except on older video games.
|
# ? Feb 6, 2014 07:08 |
|
I paid one hundred forty US dollars for my MG Sazabi. In 1999. I'd have had little fondness for that kit regardless, but the exorbitant price of entry didn't help matters.
|
# ? Feb 6, 2014 08:59 |
|
I'm currently looking around HobbySearch's tool section for a pair of nippers to go with the Sazabi I'll be ordering from them, and their selection is... Nothing if not impressive. Are there any particular recommendations for nippers, concerning brand, shape and so on?
|
# ? Feb 6, 2014 12:13 |
Seconding that. I have a pair of Citadel sprue cutters and it's like using a pair of garden shears instead of a pair of scissors. So many messy denubs and damaged parts.
|
|
# ? Feb 6, 2014 13:00 |
|
Bloody Pom posted:Seconding that. I have a pair of Citadel sprue cutters and it's like using a pair of garden shears instead of a pair of scissors. So many messy denubs and damaged parts. GOD HAND be careful, it might be too sharp Can be bought in left-handed and the website has some ridiculous spiel about katana metal being used in the cutting edges. Fauxtool fucked around with this message at 14:43 on Feb 6, 2014 |
# ? Feb 6, 2014 14:40 |
|
On the note of ridiculous pricing my sazabi ver ka cost about £100 (about $160) after shipping and customs charges. Edit: sazabi not saxabi.
|
# ? Feb 6, 2014 15:02 |
|
Luminaflare posted:saxabi. I've just gotten an idea for my next mod.
|
# ? Feb 6, 2014 15:15 |
|
The big advantage of the God Hand nippers that I can see is the thin blades - most hobby nippers seem to have really thick, wedge-shaped blades and tend to put a lot of stress on the sprues when they're being cut, which can result in marred or broken parts. I wasn't that impressed with the quality of the cuts in the video, though. Good, but not great or anything. The Micro-Mark Despruing Tweezer is still my favorite cutting tool, hands down. I recently bought another and I can confirm that they do wear out, sadly, but 20 bux a year is a small price to pay for the single best tool in my arsenal.
|
# ? Feb 6, 2014 16:46 |
|
Terry van Feleday posted:Are there any particular recommendations for nippers, concerning brand, shape and so on? God Hand is supposedly the best quality money can buy, but it's pricey. Xuron 170s make a good budget option, but are somewhat oversized in my experience. Xuron 410s are supposed to be better but I've never tried them. Tamiya's stuff is, as is generally the case with all modeling goods, pretty good. Personally I've been using a pair of MGM diagonal cutters for like twenty kits now and I've had no issues. It's gotten a little duller and can't make as sharp a cut as it did when I first got it, but I just use a hobby knife to supplement it. EDIT: Really though, unless you are using straight up scissors or some wire cutters, the nippers you use really shouldn't affect your end result much. You still have to sand away the nub after all. BlitzBlast fucked around with this message at 16:58 on Feb 6, 2014 |
# ? Feb 6, 2014 16:52 |
|
Fauxtool posted:I upgraded from the citadel safety scissors too I've been looking at getting one of these before I get my Phenex, and it's backordered everywhere. Hopefully HLJ/1999 will get some in soon.
|
# ? Feb 6, 2014 16:55 |
|
I've used a pair of cheap nippers that I got from radioshack for like 8 dollars for 4-5 years now. Still work fine, and I can't understand people shelling out more then 20 bucks for these things.
|
# ? Feb 6, 2014 19:12 |
|
The better your cutters are, the less time you have to spend sanding. Though honestly if you spent $20 on your nippers they're probably pretty drat good.
|
# ? Feb 6, 2014 19:34 |
|
I spent 10 bucks on mine, and they are pretty loving sharp, didn't have to do a lot of sanding on the Fenice when i was building that. Then again, these are nipper for cutting model train tracks so they might be a bit sharper than they should be.
|
# ? Feb 6, 2014 19:39 |
|
|
# ? May 28, 2024 15:28 |
|
Did anyone actually receive their MG Gundam X from that Amazon Prime offer from a while back? Almost four weeks in here and still no revised shipping date.
|
# ? Feb 6, 2014 19:54 |