|
H110Hawk posted:I bought a little baggy of mixed sizes for probably half this much at home depot. I'm 99% sure sinister was referring to a "wire nut." Nope. Leperflesh was right. Wire nuts are for covering twisted wires.
|
# ? Jan 27, 2016 03:47 |
|
|
# ? May 14, 2024 12:46 |
|
If kid sinister was referring to a wire nut, he would have said "wire nut". A Wago 773 is exactly the sort of thing he was referring to (except that you should buy the 2 conductor version for straight extensions). edit: oops, too slow.
|
# ? Jan 27, 2016 03:49 |
|
Massasoit posted:The people in the apartment above me had a door handle that was put in backwards by the contractor. The door wouldn't close unless you turned the handle because the flat part of the latch would hit the doorframe.
|
# ? Jan 27, 2016 04:23 |
|
Captain Cool posted:Even better, this means that when the door is closed and locked you can just push it open from the outside. Well the lock was also on the outside of the room.
|
# ? Jan 27, 2016 04:41 |
|
Massasoit posted:Well the lock was also on the outside of the room.
|
# ? Jan 27, 2016 04:45 |
|
kid sinister posted:Nope. Leperflesh was right. Wire nuts are for covering twisted wires. Edited it out since it's on a previous page. The shame is unbearable.
|
# ? Jan 27, 2016 05:15 |
|
NancyPants posted:Paper factory converted into loft apartments. The 2x10s for the beams are bolted together every two feet or so which hopefully counteracts the fact that many of them are split lengthwise in places. This isn't in Oakland, is it? I think I've mentioned it here before, but I used to live in a paper-factory-turned-apartment there. Pictures of the crappy construction in that place could easily fill their own thread, if I had any. My "favorite" feature was the knotholes in the floorboards that were covered with tin can lids and painted over in the same awful beige as everything else there. Except the kitchen. The kitchen had black and white linoleum tile flooring, and some of the pipes running through it were painted neon green like some kind of dystopian Mario level. Also, the floor was lower than the top of the windows in the unit below us by about two feet. My unit isn't pictured here, but you get the idea. Some of these actually look a bit nicer than my old place. http://www.petersonprop.com/47thAveStudios.html I also lived in a similarly awful loft in Berkeley for a bit that used to be warehouse space. Still had the roll-up gate and everything, except a previous tenant had cut part of it out and installed a regular door in it.
|
# ? Jan 27, 2016 11:45 |
|
Bees on Wheat posted:My unit isn't pictured here, but you get the idea. Some of these actually look a bit nicer than my old place. http://www.petersonprop.com/47thAveStudios.html From the thumbnails it looks like nice lofts with great natural light. Then you open the pictures and it looks like an urban exploration album (with less debris).
|
# ? Jan 27, 2016 13:19 |
|
Heating/cooling those lovely warehouses must cost a fortune. Notice an industrial gas furnace hanging on the ceiling, ha!
|
# ? Jan 27, 2016 14:08 |
|
Nitrox posted:Heating/cooling those lovely warehouses must cost a fortune. Notice an industrial gas furnace hanging on the ceiling, ha! It is located in a place where the year round temperature is between 40 and 80 degrees f. Heaven forbid they might have to toss on a sweater.
|
# ? Jan 27, 2016 15:12 |
Don't worry you can afford the bills as you are only paying $1850/month!
|
|
# ? Jan 27, 2016 15:35 |
|
Bees on Wheat posted:This isn't in Oakland, is it? I think I've mentioned it here before, but I used to live in a paper-factory-turned-apartment there. Pictures of the crappy construction in that place could easily fill their own thread, if I had any. My "favorite" feature was the knotholes in the floorboards that were covered with tin can lids and painted over in the same awful beige as everything else there. Except the kitchen. The kitchen had black and white linoleum tile flooring, and some of the pipes running through it were painted neon green like some kind of dystopian Mario level. Also, the floor was lower than the top of the windows in the unit below us by about two feet. Nope, Midwest. I shouldn't complain too much, it is actually a huge space, albeit a little awkwardly laid out, for what we're paying for. The walls are of course like tissue paper, so I can hear when my neighbors sneeze, eat a bag of chips, or have their dysfunctional relationship. On game night I think if they read me the dice I could easily play through the wall with them, but I don't want to because I hate them. Our upstairs neighbor's AC condensate was leaking into our apartment over the course of a few days this past summer and soaked the carpet surrounding our little utility closet. The office manager did not know how to operate a wet vac or how to use it on carpet which was very amusing to me. The "bedroom" wall (it is a loft, after all): Learned the hard way not to lean on that sucker! The ugliest vinyl tile I have ever seen, but at least it's properly installed in the kitchen: Unfortunately can't say the same for the bathroom: It's a little tough to see, but that foremost tile in the same column as the bubbly ones has already been replaced once. The others were like that at the time and I don't know why he did it as he did (actually yes I do), but I was tired of dealing with it so there you go. There was a lot of give to the subfloor at the time (still is), and obviously grout is both flexible and holds really well, so he just slapped in another tile and grouted around it. Yes, the grout has already popped back out. None of it is "going to kill me" stuff, and it's not nearly as bad as that Oakland loft. That is a really fugly space. Its just a lot of half-assed things that could be done a lot better by someone who knows what they are doing, I think. Oh yeah the only insulation in our outside wall is bats.
|
# ? Jan 27, 2016 17:21 |
|
CopperHound posted:It is located in a place where the year round temperature is between 40 and 80 degrees f. Heaven forbid they might have to toss on a sweater. It climbed up to 40° in Philly and I'm out in a t-shirt, goddamn.
|
# ? Jan 27, 2016 17:34 |
|
Nitrox posted:It climbed up to 40° in Philly and I'm out in a t-shirt, goddamn. Living near Philly and spending as much time in SF for work as I do I find it hilarious to see what people wear in the morning when it's "cold" (i.e. 52). They're in winter jackets, hats and scarves. And complain they they are melting when it goes over 80.
|
# ? Jan 27, 2016 17:52 |
|
Motronic posted:Living near Philly and spending as much time in SF for work as I do I find it hilarious to see what people wear in the morning when it's "cold" (i.e. 52). They're in winter jackets, hats and scarves. And complain they they are melting when it goes over 80. I took a trip from Chicago to Southern California last Christmas, and my wife pointed out the really weird sweater + shorts + ugg boots combo everybody seemed to be wearing.
|
# ? Jan 27, 2016 17:54 |
|
Safety Dance posted:I took a trip from Chicago to Southern California last Christmas, and my wife pointed out the really weird sweater + shorts + ugg boots combo everybody seemed to be wearing. Was stuck in LA from Friday to Monday because of Snowpocalypse and cancelled flights. Can confirm this is still going on.
|
# ? Jan 27, 2016 18:41 |
|
NancyPants posted:Nope, Midwest. I shouldn't complain too much, it is actually a huge space, albeit a little awkwardly laid out, for what we're paying for. Adhesive vinyl tile in a bathroom or other frequently-wet space is always a construction fail.
|
# ? Jan 27, 2016 20:10 |
|
kid sinister posted:Nope. Leperflesh was right. Wire nuts are for covering twisted wires. Just outta curiosity, which one would you recommend for Joe homeowner to use around the house? I've been using wire nuts because I read that backstabbed receptacles tend to loosen up over time because of thermal expansion/contraction (and indeed have noticed that replacing the backstabbed receptacles in my own house), and it seemed that the push in connectors were a similar mechanism... I take it that's not a relevant concern with these newer connectors? If that's the case, is there a compelling reason to use one or the other? ...TIA
|
# ? Jan 28, 2016 00:12 |
|
The big downside of the push in connectors like that is that they're significantly more difficult to disassemble. They are more reliable than back stab outlets. If you're willing to spend a bit extra to get the good poo poo, go for Wago 221 lever nuts.
|
# ? Jan 28, 2016 00:29 |
|
Zhentar posted:The big downside of the push in connectors like that is that they're significantly more difficult to disassemble. They are more reliable than back stab outlets. I loving LOVE LEVER NUTS
|
# ? Jan 28, 2016 00:47 |
|
OSU_Matthew posted:Just outta curiosity, which one would you recommend for Joe homeowner to use around the house? I've been using wire nuts because I read that backstabbed receptacles tend to loosen up over time because of thermal expansion/contraction (and indeed have noticed that replacing the backstabbed receptacles in my own house), and it seemed that the push in connectors were a similar mechanism... I take it that's not a relevant concern with these newer connectors? If that's the case, is there a compelling reason to use one or the other? ...TIA Wire nuts are still the best that I've used. The only time I recommend push in connectors are for this specific circumstance, when wires are cut too short in the box. Push in connectors don't work with very finely braided wires. That being said, I've never used lever nuts. I can see them working better than push ins though, due to the fact that it's the lever that makes the wires contact internally, not a spring like with push ins. They look like they would work with very finely braided wires too. The only downside I see to lever nuts are their size.
|
# ? Jan 28, 2016 01:36 |
|
Zhentar posted:The big downside of the push in connectors like that is that they're significantly more difficult to disassemble. They are more reliable than back stab outlets. Oh, those look nice. I just used wire nuts for the last run I put in, but I made sure I used the correct ones for the circuit I did. I think next time, I may use those. Who am I kidding. The conduit was such a pain in the rear end to run to the breaker box and down the walls from the attic I'm just getting an equity loan and hiring an electrician. I discovered some questionable wiring when I was adding in my circuit, so I think I want it all gone over anyway.
|
# ? Jan 28, 2016 01:43 |
|
kid sinister posted:The only downside I see to lever nuts are their size. That's the magical thing about the new 221s - the size isn't a down side anymore.
|
# ? Jan 28, 2016 02:44 |
|
At $0.57 a piece, those 221s are better suited for those projects, where wires are cut too short to twist or something...
|
# ? Jan 28, 2016 13:38 |
|
I just found this on imgur. "Shitter's clogged."
|
# ? Jan 30, 2016 17:28 |
|
Drake_263 posted:
Looking at the handle, I'm inclined to think it's a hotel, but still, how does the septic system backfill like that?? Unless it's Sochi, please tell me this is from Sochi
|
# ? Jan 30, 2016 17:40 |
|
Might want to cover the fart fan exhaust on the roof before pouring concrete repairs up there.
|
# ? Jan 30, 2016 17:43 |
|
Drake_263 posted:"Shitter's clogged." Jesus Christ.
|
# ? Jan 30, 2016 17:45 |
|
Drake_263 posted:I just found this on imgur.
|
# ? Jan 30, 2016 17:49 |
|
Motronic posted:Might want to cover the fart fan exhaust on the roof before pouring concrete repairs up there. It looks like concrete and for my own sanity I will continue to think that it is such.
|
# ? Jan 30, 2016 17:50 |
|
My reaction was the exact same but ya, that is concrete. Dude fixing up the roof didn't cover the toilet exhaust vent.
|
# ? Jan 30, 2016 18:30 |
|
How do you even begin to clean something like that up? Shovel as much as you can before it sets, then...???
|
# ? Jan 30, 2016 18:48 |
|
Call their insurance and get a new bathroom remodel would be my guess.
|
# ? Jan 30, 2016 18:52 |
|
Close and seal the door. Then finish the pour. Make a modern cask of amontillado and seal that bathroom up. As the door gets sealed you hear a sad flush that sounds softly of sorrow and pain as the rest of the concrete comes down.
|
# ? Jan 30, 2016 18:54 |
|
30 Goddamned Dicks posted:How do you even begin to clean something like that up? Shovel as much as you can before it sets, then...??? Grab a ton of sugar and start shoveling and mixing the sugar in
|
# ? Jan 30, 2016 19:11 |
No amount of shoveling is going to fix the problem, because the pipes are also full of concrete themselves, which means a looooooooot of pipe is going to have to get replaced, meaning walls and floors torn up, etc. Who even knows how far downstream from the toilet that concrete made it. Whoever was doing that pour is going to have a tough time with their insurance premiums going forward.
|
|
# ? Jan 30, 2016 19:33 |
|
It looks like the toilet lid's closed, so maybe they got lucky
|
# ? Jan 30, 2016 19:36 |
|
Bad Munki posted:No amount of shoveling is going to fix the problem, because the pipes are also full of concrete themselves, which means a looooooooot of pipe is going to have to get replaced, meaning walls and floors torn up, etc. Who even knows how far downstream from the toilet that concrete made it. Whoever was doing that pour is going to have a tough time with their insurance premiums going forward. That appears to have come in from the ceiling (i.e. through the vent fan) so it's unlikely any pipe will need to be replaced. But they're gonna need some serious floor/wall work depending on how quickly they get sugar in there or just remove the crete.
|
# ? Jan 30, 2016 19:39 |
|
What's the sugar for? And would you say there's about 400lbs there, or more?
|
# ? Jan 30, 2016 20:01 |
|
|
# ? May 14, 2024 12:46 |
|
Cakefool posted:What's the sugar for? It “poisons” the concrete and prevents it from setting as fast or as hard.
|
# ? Jan 30, 2016 20:02 |