So I actually did file complaints with OSHA and OSHA is actually quick! Here are my complaints and the "solutions": Complaint: People standing and walking on roller conveyors and smooth metal ramps about 10 feet high. Not maintenance employees or anything, just people wanting to take a looky-loo or unjam plastic bins. Solution: Supervisors have a meeting to tell people not to do it. People still do it with supervisors witnessing and not doing anything. This is somewhat "encouraged" because the line jams up constantly and who the heck has time to call maintenance!? Complaint: The main exit that people know about is locked from the inside and needs a proximity key to unlock it. There are emergency exits but in an emergency I promise you everyone is going to head to the exit they primarily use. Oh crap there is a malfunction and the door won't unlock!? A wave of people make it impossible to unlock if? People in a panic mode don't notice the lock release lever three feet over? There is absolutely no legitimate reason for that door to be locked and they clearly do it to track employee breaks with the proximity cards. Solution: Double down on the bullshit and tell people about the electronic release lever that will totally not fail ever you guys. Complaint: The roller conveyors are loud enough to cause hearing damage. Solution: None. Complaint: Eyewash station and pedestrian pathways are blocked. Solution: Tell people to not do it. Havent seen a blockage since thankfully. The first page of the letter OSHA sent was posted asking about these complaints. At my old workplaces, complaints would be posted as well as the company's response and solution so I don't know if that's a requirement. I have since noticed a few more issues. Supposedly just a few days after the don't touch the conveyor talk, a supervisor fell and broke her arm. I have only heard this as a maybe, but she does have her arm in a sling. If it was an injury from the conveyor, then it was almost certainly not reported. Still have the 140 days worked without an injury thing posted and it is going up. Lockout tagout doesn't seem to be a thinmeant least not as I know it. As I know it, any sort of energy source must be locked in an off position disabling it completely along with a tag saying who is in where for how long when someone can be potentially harmed by said source of energy. Simply turning off the machine is not good enough. Here is how my company does it. There are these series of racks, 30ish feet high and very narrow. Between these racks are rails upon which this "robot" moves back and forth very quickly and elevating to remove boxes from the racks. There are control panels for each rail and robot. Frequently, (at least 10 times per shift) a box jams up and someone has to go in these aisles to unjam it. This is not a maintenance person, just a warehouse picker. Before they leave, they take a key from the control boxes which supposedly turns it off but the electrical energy is still enabled. I know this because under each control box, there are power boxes with big switches with holes in them clearly meant for lockout. I don't know enough about the machines or lockout tagout to make a complaint, but I am going to try to learn tomorrow. I want to know what taking the key out of the control box actually does and if it counts as a lockout tagout situation.
|
|
# ? Mar 27, 2016 21:12 |
|
|
# ? May 28, 2024 15:55 |
|
My Favorite OSHA story: In the 70s, Malaysia was the biggest miner of tin in the world, accounting for 1/3 of all production. Come the mid 80's tin prices dropped, so miners attempt to make up the price shortfall by getting it out of the ground at the lowest cost possible, even if that easy-to-reach tin happens to be found in sea-ward wall of an open-cut mine right next to the Indian Ocean Now, despite this mine having been in operation for decades, one day in 1993, the owner notices some pretty waterfalls have sprung up overnight, and (smartly) orders all the equipment moved out (I'm guessing the workers too, but perhaps as an afterthought). He then calls a friend and tells him he thinks the mine might be about to collapse - the friend grabs a video camera and hurries over: https://www.youtube.com/watch?v=aa3nFLZIvbU Google Maps of the new cove formed afterward: https://www.google.com/maps/@4.4004273,100.5889835,1041m/data=!3m1!1e3?hl=en
|
# ? Mar 28, 2016 00:01 |
|
Serak posted:My Favorite OSHA story: holy loving poo poo that's amazing
|
# ? Mar 28, 2016 00:06 |
|
JFairfax posted:holy loving poo poo that's amazing Christ almighty. Does anyone have a guess about how much water it would take to fill that mine or how long it would take to fill? From the google maps, that seawall looks like it was a third of a mile long.
|
# ? Mar 28, 2016 02:24 |
|
Hot Karl Marx posted:Yes I know they will, but have you moved the base with the boom fully extended while in the basket? I can't tell if you're being dumb on purpose or not. You quoted my post where I said that's exactly what they do. The only way to drive a boom lift is from in the basket. There are no drive controls on the ground, only boom controls.
|
# ? Mar 28, 2016 03:31 |
Tangentially related, my company is having a meeting this week and we've got a very high ranking OSHA representative speaking to us via WebEx or a phone about the new crane operator training ruling. Turns out the guy who's supposed to be speaking doesn't even know for sure if he is because nobody is telling anyone anything!
|
|
# ? Mar 28, 2016 03:44 |
|
Sockington posted:I had to climb this 280' tower when I was an apprentice. I was loving whipped by the end of climbing and pulling up tools every few decks. I kind of wish there was some sort of netting/protection at the top to stop the possibility of any dropped items theres often temporary netting put in place in plants i work at but probably just as often not
|
# ? Mar 28, 2016 04:02 |
|
EKDS5k posted:I can't tell if you're being dumb on purpose or not. You quoted my post where I said that's exactly what they do. The only way to drive a boom lift is from in the basket. There are no drive controls on the ground, only boom controls. About 2 seconds of thought should reveal why ground level driving controls would be a terrible idea for a boom lift. Literally the best outcome is that lift lurches away from the dumbass ground operator, preventing them from going anything worse. jetz0r fucked around with this message at 05:02 on Mar 28, 2016 |
# ? Mar 28, 2016 04:59 |
|
jetz0r posted:About 2 seconds of thought should reveal why ground level driving controls would be a terrible idea for a boom lift. Yeah I'm no expert, but I'm pretty sure they have ground and remote control panels for example https://www.youtube.com/watch?v=pCaGTBwAV5I&t=198s EDIT: i'm the idiot who missed you were talking specifically about driving controls. nevermind!!!!! Slanderer fucked around with this message at 05:56 on Mar 28, 2016 |
# ? Mar 28, 2016 05:51 |
|
In other news, a petition is circulating to force the allowance of the open carry of firearms at the Republican National Convention . So, how much would you have to get paid to empty the trashcans at this event?
|
# ? Mar 28, 2016 06:30 |
|
EKDS5k posted:I can't tell if you're being dumb on purpose or not. You quoted my post where I said that's exactly what they do. The only way to drive a boom lift is from in the basket. There are no drive controls on the ground, only boom controls. doesnt matter, I know jobsites won't let you drive them around with the boom fully extended, I know you're misreading me on purpose
|
# ? Mar 28, 2016 10:29 |
|
Fasdar posted:In other news, a petition is circulating to force the allowance of the open carry of firearms at the Republican National Convention . They try so hard to focus on the most irrelevant issues
|
# ? Mar 28, 2016 14:09 |
|
astrollinthepork posted:I want to know what taking the key out of the control box actually does and if it counts as a lockout tagout situation. This is a situation that requires a risk assessment, and possibly a LOTO procedure to protect the worker. I'm personally torn on how I would approach this, without knowing all the details; however, I don't think the worker should be the one to pull and keep the key. I also don't think it is ever wrong to push for a LOTO procedure. Assuming the key is an interlock that effectively isolates the robot overlord from being able to assimilate the worker, and that interlock completely isolates ALL potential energy (electrical, hydraulic, mechanical, etc.) from the worker, than that could be a good place to deploy a LOTO device. You mentioned that it happens often during the shift, often enough that I might just write a procedure for clearing the debris. Supervisor secures the robot by removing the key and guarding the console, supervisor tells worker to clear the path, worker reports when done, supervisor installs the key and turns on the robot overlord. This all hinges on the magic key being an effective isolation; which, needs to be proven through technical manuals, equipment drawings, and manufactures technicians. Tribal knowledge is never enough. If there is any doubt then a LOTO procedure should be required.
|
# ? Mar 28, 2016 14:21 |
|
HughGRect posted:This is a situation that requires a risk assessment, and possibly a LOTO procedure to protect the worker. I'm personally torn on how I would approach this, without knowing all the details; however, I don't think the worker should be the one to pull and keep the key. I also don't think it is ever wrong to push for a LOTO procedure. The supervisor should only touch LOTO when it becomes cross function (operators locking out for maintenance or maintenance performing isolation steps) or will extend for greater than one shift. Making the supervisor touch every single LOTO is a very popular training wheels step that they forget to take out when everyone knows how to LOTO and also a good way to get people to say gently caress that and just skip it because when has a supervisor ever had a free minute? Operators clearing blockages is the perfect situation for an entirely operator handled single source if the engineering is feasible. Even if there's a handful of sources, since its solely in the operators wheelhouse and something that gets done within one shift, its a very good candidate for a low administrative overhead lockout where the operator denergizes and locks the energy sources under his own direction with a local lockbox. A risk assessment is the right request, especially because if all the safety organs are functioning correctly, it should trigger a root cause analysis about why it needs manually cleared so often in the first place and the bosses can be happy when they improve production by an iota by fixing that concurrent with making the clearing process take longer.
|
# ? Mar 28, 2016 14:40 |
|
How to start then put out an electrical fire. Step 1: Let it be winter. https://www.youtube.com/watch?v=X_r4NALv0Ao
|
# ? Mar 28, 2016 18:58 |
|
ReagaNOMNOMicks posted:How to start then put out an electrical fire. I'll freely admit my ignorance for industrial electric stuff, but I feel like "I don't know what happened, lets throw some snow on it" is the mentality that might have caused this problem in the first place.
|
# ? Mar 28, 2016 22:27 |
|
That took longer to trip than I am comfortable with. But... Russia amirite?
|
# ? Mar 28, 2016 22:47 |
|
Big Steveo posted:That took longer to trip than I am comfortable with. But... Russia amirite? Is that what happened? It didn't seem like it was ever going to cut out, so I thought he must have yelled it to death.
|
# ? Mar 28, 2016 22:53 |
|
The guy carefully checking the sheet in front of him just before all the magic smoke got let out reminds me of that bit from the Chernobyl disaster: "We've tried following the emergency shutdown procedure but half of the items are crossed out" "...do all the things that are crossed out then"
|
# ? Mar 28, 2016 23:56 |
|
ReagaNOMNOMicks posted:How to start then put out an electrical fire. I like how the guy strongly suspects something will go wrong, you can see him flinching initially when the guy does what he is about to do
|
# ? Mar 29, 2016 00:21 |
|
https://www.youtube.com/watch?v=r0phCrgRwBM
|
# ? Mar 29, 2016 00:30 |
|
Oh my god his website is the best thing I've ever seen http://www.strokerengine.com/intro.html
|
# ? Mar 29, 2016 00:35 |
|
Come on, man. It's not like cameras are rocket science
|
# ? Mar 29, 2016 00:42 |
|
Hot Karl Marx posted:doesnt matter, I know jobsites won't let you drive them around with the boom fully extended, I know you're misreading me on purpose Ok, so you are being dumb on purpose. You never said anything about jobsite rules, only that you can't drive them from the basket with the boom fully extended. Obviously that's wrong, as I have, without being catapulted out of the basket. If a site has a rule against it then it's probably because some idiot operator didn't bother to make sure he was driving on flat ground and launched himself. I'm dropping this argument because I just scrolled through your post history in this thread, and I see that you're an ~*equipment operator*~ and in my experience operators know best about everything and don't need advice from actual trained mechanics.
|
# ? Mar 29, 2016 05:11 |
|
Propaganda Hour posted:Oh my god his website is the best thing I've ever seen http://www.strokerengine.com/intro.html Yes, yes it does. Also: Edit: Not osha, but it was just around the corner from the explosive truck. Although I guess it could be osha in a way. Great job blurring out the phone number google. ChesterJT fucked around with this message at 06:08 on Mar 29, 2016 |
# ? Mar 29, 2016 06:03 |
|
http://i.imgur.com/x8em3tW.gifv
|
# ? Mar 29, 2016 11:23 |
|
That's a grade A+ fencing response. Ouch.
|
# ? Mar 29, 2016 11:30 |
|
Some pretty serious decorticate posturing going on, dude probably got turned into a vegetable RIP
|
# ? Mar 29, 2016 13:10 |
|
Ok usually these don't affect me much but this one is hosed up. The question then, for this man, is how long until we turn off the ventilator?
|
# ? Mar 29, 2016 13:19 |
|
ChesterJT posted:
Something tells me this guy makes a drat good engine though.
|
# ? Mar 29, 2016 13:21 |
|
I bet he's got a cool workshop with lots of neon signs and stuff
|
# ? Mar 29, 2016 13:26 |
|
Seems almost too perfect to be real with all the cameras around
|
# ? Mar 29, 2016 13:45 |
|
Uh yeah I did some quick calculations and that's like a 15 kg log being flung at about 100 km/h. Guy might have survived just a hit from the log, but the crush against the trailer almost certainly shattered his skull.
|
# ? Mar 29, 2016 13:47 |
|
VectorSigma posted:Uh yeah I did some quick calculations and that's like a 15 kg log being flung at about 100 km/h. And that pose on the way down is sign of a bad coma.
|
# ? Mar 29, 2016 13:49 |
|
Allegedly his skull was fractured, but he lived. No word on brain damage.
|
# ? Mar 29, 2016 14:37 |
|
dis astranagant posted:And that pose on the way down is sign of a bad coma. Yeah, that's some grade A decorticate response. It's a pretty good indicator of "Brain be hosed".
|
# ? Mar 29, 2016 15:01 |
|
Platystemon posted:No word on brain damage. He was a labourer. It was a pre-existing condition
|
# ? Mar 29, 2016 15:04 |
|
https://zippy.gfycat.com/GaseousAcceptableCoral.webm
|
# ? Mar 29, 2016 15:13 |
|
I sunk my battleship!
|
# ? Mar 29, 2016 15:17 |
|
|
# ? May 28, 2024 15:55 |
|
I like how with a simple pan you can almost tell the exact moment the camera operators goes from worrying about the missile loving up to worrying the fact the entire front of their ship appears to be on fire.
|
# ? Mar 29, 2016 17:10 |