|
But I mostly use my table saw to cut hotdogs!!
|
# ? Jan 6, 2017 03:11 |
|
|
# ? Jun 5, 2024 05:14 |
|
Look at this scrub who doesn't know the proper way to cut hot-dogs is with a bandsaw.
|
# ? Jan 6, 2017 03:24 |
|
Wish they had this back in high school. I'd have 10% of my thumb back.
|
# ? Jan 6, 2017 03:36 |
|
Trebek posted:Wish they had this back in high school. I'd have 10% of my thumb back. Apparently its not a popular safety device because it damages the machine. Because you know that's more important than making sure someone doesn't get their hand chopped off.
|
# ? Jan 6, 2017 03:56 |
|
http://i.imgur.com/Tgzady7.gifv http://i.imgur.com/ccCls5r.gifv https://www.youtube.com/watch?v=q-4mBbTUDq0
|
# ? Jan 6, 2017 03:59 |
|
Holy poo poo! I love that
|
# ? Jan 6, 2017 04:09 |
|
muscles like this! posted:Apparently its not a popular safety device because it damages the machine. Because you know that's more important than making sure someone doesn't get their hand chopped off. They're actually incredibly popular, because apart of the saw-stop feature, they're extremely high-quality tools. When they first appeared, woodworkers were a bit hesitant because the whole thing seemed gimmicky, and like you said, if the saw does engage the brake you have to get new internals for the saw. But people quickly discovered that they were really good saws beyond that too.
|
# ? Jan 6, 2017 04:17 |
|
Evan Peters?
|
# ? Jan 6, 2017 04:42 |
|
Bloody Hedgehog posted:They're actually incredibly popular, because apart of the saw-stop feature, they're extremely high-quality tools. Better than new externals for your hand.
|
# ? Jan 6, 2017 05:21 |
|
Gorilla Salad posted:I always wanted to know how they got the values for sin, cos and tan and none of my teachers could ever explain it worth a drat. Especially when we got to the more advanced stuff like that. It's all ratios. It's also how/why if you know any 3 factors (angles, sides)(Other than just angles) you can figure out the rest on a triangle pretty quickly with a²+b²=c², the sum of the 3 angles = 180, and [utl=https://www.mathsisfun.com/algebra/trig-solving-sss-triangles.html]the law of cosine[/url]. Anything more than this quickly goes WAY over my head, but if you REALLY want to know the math with more than just plugging in actual measurements and calculating, look there. If you want the complete 1-90 chart, it's out there. I just need to remember this post when I go back to school. Also
|
# ? Jan 6, 2017 05:33 |
|
My dad almost bought one of these for his woodshop. They have sensors to detect extremely small changes in current, then shoots the blade inwards fast enough to not cut your hand
|
# ? Jan 6, 2017 06:23 |
|
That's cool enough, but are there any videos of a hot dog / flesh analogue actually smacking into the blade instead of sloooooowly edging in?
|
# ? Jan 6, 2017 06:29 |
|
Potato Salad posted:That's cool enough, but are there any videos of a hot dog / flesh analogue actually smacking into the blade instead of sloooooowly edging in? http://i.imgur.com/Q1RiVF2.gifv http://i.imgur.com/gG4XHqt.gifv I saw videos about this years ago and just happened to run into the sausage one today, so glad some others could actually talk about it. This thing's going to change my life since I no longer need pants to do shop work anymore.
|
# ? Jan 6, 2017 06:46 |
|
Potato Salad posted:That's cool enough, but are there any videos of a hot dog / flesh analogue actually smacking into the blade instead of sloooooowly edging in? If you dig around, one of the main salesmen did an interview where he demonstrated it with his hand. I don't think he really likes to do it because it freaks everyone out (including himself) a ton
|
# ? Jan 6, 2017 06:49 |
|
w00tmonger posted:If you dig around, one of the main salesmen did an interview where he demonstrated it with his hand. I don't think he really likes to do it because it freaks everyone out (including himself) a ton Weak. Shoulda used his ballsack.
|
# ? Jan 6, 2017 06:53 |
|
It's often harder on the saw than it is on the sausage.
|
# ? Jan 6, 2017 09:23 |
|
Somfin posted:Weak. Let me show you all how safe our saws are! *saw brake slams down on donger*
|
# ? Jan 6, 2017 09:56 |
|
Bloody Hedgehog posted:When they first appeared, woodworkers were a bit hesitant because the whole thing seemed gimmicky, and like you said, if the saw does engage the brake you have to get new internals for the saw. But people quickly discovered that they were really good saws beyond that too. I mean...the "new internals" are just a new blade and the stopping mechanism, right? And since it's designed around those parts needed to get replaced when it triggers, I cab't imagine it's that hard or expensive to replace them. And this, or similar, tech is being used on other brands now, too. I saw a segment of "Ask This Old House" where a Bosch table saw had a similar mechanism. Not sure if it's their own design or licensing out the SawStop patent, but still cool that other manufacturers are deciding that safety is good. One thing I'm still not clear on is how they do with wet wood...wasn't there an issue with false positives because wet wood has a capacitance similar to skin?
|
# ? Jan 6, 2017 16:19 |
DrBouvenstein posted:I mean...the "new internals" are just a new blade and the stopping mechanism, right? And since it's designed around those parts needed to get replaced when it triggers, I cab't imagine it's that hard or expensive to replace them. A replacement brake cartridge is like $70, plus the replacement blade which can be anywhere from $20 to $200 depending on what you're running in there, but that's a hell of a deal compared to losing a finger. I think some people manage to recover their blades from the brake, too. Not sure I'd want to, but there it is. There are other options out there that only require a reset, but I'm not sure if they stack up quite as well as the sawstop. That being said, the sawstop guy(s?) is an rear end in a top hat, he came up with his great idea, and then tried to get it mandated that all new saws licensed his kit, by law. I don't really care if the tech becomes required in new saws, but if that's going to be the case, you can't force people to license that poo poo, you have to open it up. At least that's what I recall happened. He didn't succeed in his plan, at least. And yes, you can get false positives with conductive materials.
|
|
# ? Jan 6, 2017 16:30 |
|
Most safety and environmental regulations are centered on patent exploitation so the only reason he isn't par for the course is that he isn't a megacorp consortium who can buy legislative committee votes and have ins to the regulatory bodies.
|
# ? Jan 6, 2017 16:44 |
|
Bad Munki posted:And yes, you can get false positives with conductive materials. True, but there's a bypass mode so you can run the saw without the safety brake, plus there's a little LED that'll light up if the item your testing in bypass mode is conductive. I think the wood has to be absolutely sopping wet to be conductive anyway. Slightly moist wood generally shouldn't set it off, and if you're shelling out the cash for a quality saw-stop unit, you're probably not cutting damp wood in the first place.
|
# ? Jan 6, 2017 16:48 |
|
To replace all the parts that get hosed up is a few hundred bucks, but the thought is most people would rather have part of their finger
|
# ? Jan 6, 2017 17:36 |
|
Bloody Hedgehog posted:True, but there's a bypass mode so you can run the saw without the safety brake, plus there's a little LED that'll light up if the item your testing in bypass mode is conductive. Didn't know this, that's cool. We've been pining for one at our shop but we occasionally cut aluminum with the table saw and thought that would be a deal breaker.
|
# ? Jan 6, 2017 17:44 |
|
|
# ? Jan 6, 2017 17:49 |
|
pity he didn't fake an epileptic fit.
|
# ? Jan 6, 2017 17:54 |
|
Lol
|
# ? Jan 6, 2017 17:58 |
|
I think they're playing the Nokia ringtone, too.
|
# ? Jan 6, 2017 18:39 |
|
Maleh-Vor posted:I think they're playing the Nokia ringtone, too. I'm telling myself they're playing the Psycho theme.
|
# ? Jan 6, 2017 20:17 |
|
Bloody Hedgehog posted:When they first appeared, woodworkers were a bit hesitant because the whole thing seemed gimmicky, and like you said, if the saw does engage the brake you have to get new internals for the saw. But people quickly discovered that they were really good saws beyond that too. I would be willing to bet that people are, ironically, more safety-conscious when using those things for fear of setting it off and loving up their nice saw.
|
# ? Jan 6, 2017 22:35 |
|
http://i.imgur.com/6TsvFsi.gifv https://i.imgur.com/odt8hZw.gifv http://i.imgur.com/38Rds1B.gifv
|
# ? Jan 6, 2017 23:02 |
|
Somfin posted:Weak. http://i.imgur.com/fFbr4qF.gifv
|
# ? Jan 6, 2017 23:45 |
|
|
# ? Jan 7, 2017 00:13 |
|
New season of Xtreme Parking Wars is looking great.
|
# ? Jan 7, 2017 00:26 |
|
Slide down window extend key back out find other parking spot
|
# ? Jan 7, 2017 00:33 |
|
tbh the shitlord there is the white car, if someone stops like that so they can back up into a spot, you don't do that.
|
# ? Jan 7, 2017 00:56 |
|
Really should've used a spoiler tag for that gif.
|
# ? Jan 7, 2017 03:07 |
|
http://i.imgur.com/ifVcrAO.mp4
|
# ? Jan 7, 2017 04:20 |
|
["Clair de Lune" fades in softly]
|
# ? Jan 7, 2017 06:58 |
|
QuasarIntheMist posted:["Clair de Lune" fades in softly] The new car boys is a really good one
|
# ? Jan 7, 2017 07:50 |
|
|
# ? Jun 5, 2024 05:14 |
|
https://www.youtube.com/watch?v=uub0z8wJfhU
|
# ? Jan 7, 2017 08:32 |