|
CrazyLittle posted:IIRC win8.1 x64 and win10 should have backwards compatibility modes for most x86 software. If that doesn't work, try running the worst offenders in a Virtualbox Virtual Machine? I've thought about it but expecting a bunch of high schoolers and Luddite professors to do anything with that. It's just too much of a hassle to mess with.
|
# ? Jan 31, 2017 23:14 |
|
|
# ? Jun 5, 2024 04:04 |
|
CrazyLittle posted:This is so dumb. I can't think of any reason why you'd want both ports of a wifi access point to be plugged into the same LAN segment considering that the current crop of harware will never get close to 1-gigabit speeds let-alone 2-gig/sec. There's no reason to ever aggregate the two ports of an access point, and yet I've seen this exact scenario play out multiple times with different wifi AP vendor's hardware. I disagree with that. We've seen 1.4gb/sec out of our Extreme AP 3935s in front of the larger conference rooms. They're hooked up via LAG to the edge.
|
# ? Feb 1, 2017 01:44 |
|
DigitalMocking posted:I disagree with that. We've seen 1.4gb/sec out of our Extreme AP 3935s in front of the larger conference rooms. They're hooked up via LAG to the edge. How are you getting 1.4gb/sec unless you're using 80mhz wide channels, also is that a number derived from adding tx/rx duplex together? The "1.73gb/sec" numbers cited in ads and tech-specs are a fiction derived from multiplying the channel width theoretical bandwidth times the number if MIMO streams. In your AP's case they're taking the theoretical max rate of 802.11ac 80mhz wide channels "433.3mb/sec" and multiplying it times four. You'll never hit that number in real world use. You'll never hit that number in HALF DUPLEX. CrazyLittle fucked around with this message at 02:37 on Feb 1, 2017 |
# ? Feb 1, 2017 02:31 |
|
CrazyLittle posted:How are you getting 1.4gb/sec unless you're using 80mhz wide channels, also is that a number derived from adding tx/rx duplex together? I can only tell you what we're getting from SNMP monitoring of the LAG, peak is 1,234,418 kbit/s recorded about a month ago during a sales meeting, with ~60 or so clients accessing it. So a little less than I thought, that's about 1.1gb/sec. That number is in and outbound bandwidth of the LAG. DigitalMocking fucked around with this message at 16:04 on Feb 1, 2017 |
# ? Feb 1, 2017 15:56 |
|
DigitalMocking posted:I can only tell you what we're getting from SNMP monitoring of the LAG, peak is 1,234,418 kbit/s DigitalMocking posted:That number is in and outbound bandwidth of the LAG. 1 Gigabit ethernet is capable of 2gbit/sec aggregate bandwidth in + out.
|
# ? Feb 1, 2017 16:46 |
|
CrazyLittle posted:1 Gigabit ethernet is capable of 2gbit/sec aggregate bandwidth in + out. In theory.
|
# ? Feb 1, 2017 19:13 |
|
DigitalMocking posted:In theory. The point is that you don't need LAG to achieve 1.2gbps in + out
|
# ? Feb 1, 2017 20:44 |
|
Employment came in. Started in the service desk of a rather large mining equipment company, with decent pay and a 6-month limited contract (which might be extended) and I feel like I'm learning actually useful stuff, after Applecare. AD, Altiris, Office 365, user rights management and other related stuff, also some things still running in Lotus Notes. A particular bonus is the fact that this is in the top of a 9-story building where they spent quite a bit to soundproof the place. There is a major highway very close, but you cannot hear it at all. I feel like this going be a good springboard to better things, either internally or elsewhere.
|
# ? Feb 1, 2017 20:59 |
|
In our ticketing system pressing the enter key to begin a search doesn't work, and instead it reloads the page with a ~50% chance of logging you out. After 2 years I really should be used to that by now, but it still trips me up a few times a week. I'm just so used to pressing enter to initiate search on every other tool I use.
|
# ? Feb 1, 2017 23:43 |
|
I need a vacation. We lost our internet connection at 10:30 this morning. Verified everything on our end was working as it should. The AT&T circuit had no transmission activity on the fiber. I called in to open a ticket and they said to give them an hour to run tests and get in touch with local techs. I call back an hour and a half later and ask about an update on the ticket. The ticket says "customer request ticket closed, no issue to report." I most certainly did not. I tell her to reopen the drat ticket and get this figured out. She says to give them an hour to run tests and get in touch with local techs. I lose it and tell her I've got an entire school that has been without internet for hours. On top of everything, we've got a shitload of national tests being taken today, and it requires internet. I can't possibly wait another hour on this, so please elevate me to your superior so I can get something scheduled sooner. Put on hold for 30 minutes and then the call is dropped. It's now 4:45. We still don't have internet. Last I heard the tier 2 techs were reviewing test results on our circuit. I've been pushing for a backup connection since I started. Director won't approve an extra $1200 a year to almost guarantee we don't have to deal with this again. It's apparently easier to just blame it all on me and get really pissed off every other month this happens. *grumble grumble*
|
# ? Feb 1, 2017 23:44 |
|
Hungry Computer posted:In our ticketing system pressing the enter key to begin a search doesn't work, and instead it reloads the page with a ~50% chance of logging you out. After 2 years I really should be used to that by now, but it still trips me up a few times a week. I'm just so used to pressing enter to initiate search on every other tool I use. I can't use keyboard shortcuts for nearly anything in our software and it trips me up daily.
|
# ? Feb 1, 2017 23:48 |
|
Blue_monday posted:I can't use keyboard shortcuts for nearly anything in our software and it trips me up daily. Our ticketing system hijacks the right click menu and make it difficult to select text, pretty sure it's slowly killing me. Other than that it's a really powerful tool and I don't have many other complaints about it. We're moving to another system pretty soon.
|
# ? Feb 1, 2017 23:59 |
|
larchesdanrew posted:I need a vacation. I really don't get how Major ISPs don't get shot up more often.
|
# ? Feb 2, 2017 00:13 |
|
They probably hide themselves well on Google Maps
|
# ? Feb 2, 2017 00:17 |
|
Also they don't use signage on their critical buildings, so all you see is a nondescript office building, not a neon-lit extravaganza.
|
# ? Feb 2, 2017 00:27 |
|
larchesdanrew posted:I need a vacation. I don't understand why some schools have such crummy internet. We support a bunch, and some of them go down pretty frequently. These schools have backup data circuits, and they STILL go down from time to time. To make you jealous, they actually run 3 different circuits: a cable or fiber connection (whatever's available), a backup circuit (that also handles guest wifi), AND a VOIP circuit. The phones get frequently screwed up, and we have to forward calls to someone's cell phone during the day :/
|
# ? Feb 2, 2017 00:31 |
|
Johnny Aztec posted:I really don't get how Major ISPs don't get shot up more often. Do American ISP's not have SLA's in their contracts for schools and companies?
|
# ? Feb 2, 2017 01:44 |
|
Can you go to the paper or local news sta.... Can you go to the paper? Tell them about how the school lost their internet connection on test day and Big Business AT&T gave poor little giu $county_school the runaround all day, and won't even pay back for the service outage!
|
# ? Feb 2, 2017 01:53 |
|
Neddy Seagoon posted:Do American ISP's not have SLA's in their contracts for schools and companies?
|
# ? Feb 2, 2017 02:38 |
|
Thanks Ants posted:They probably hide themselves well on Google Maps I know for a while it was a constant battle for the local TWC call center to not be flagged on the map. TWC would get it removed and disgruntled or ex-employees would just add it right back. Not that I ever did anything like that.
|
# ? Feb 2, 2017 03:08 |
|
A Pinball Wizard posted:Can you go to the paper or local news sta.... That sounds like a great way to lose advertising dollars.
|
# ? Feb 2, 2017 05:00 |
|
Thought about ya'll when I saw this news today. Someone troubleshooting at gitlab.com managed to wipe a live database accidentally. Then they found that none of their backups were reliably working. They happened to have a manual snapshot from earlier in the troubleshooting, so they lost 6 hours of data instead of 24. https://about.gitlab.com/2017/02/01/gitlab-dot-com-database-incident/ quote:At 2017/01/31 23:00-ish team-member-1 thinks that perhaps pg_basebackup is refusing to work due to the PostgreSQL data directory being present (despite being empty), decides to remove the directory. After a second or two he notices he ran it on db1.cluster.gitlab.com, instead of db2.cluster.gitlab.com. quote:Regular backups seem to also only be taken once per 24 hours, though team-member-1 has not yet been able to figure out where they are stored. According to team-member-2 these don’t appear to be working, producing files only a few bytes in size. quote:The replication procedure is super fragile, prone to error, relies on a handful of random shell scripts, and is badly documented
|
# ? Feb 2, 2017 05:02 |
|
Volmarias posted:That sounds like a great way to lose advertising dollars. I doubt AT&T bothers to advertise in the local paper of nowheresville, but there also are probably not many readers of that local paper either.
|
# ? Feb 2, 2017 05:34 |
|
A ticket didn't come in. 1st line agent spent an hour on a password reset call with a partner, then didn't open or record any call information, then told him local support had been informed and would fix it promptly and hung up. Agent didn't check the calendar to see local support was scheduled on important work in another office all week, didn't contact local support either, and as they didn't open a ticket, there wasn't even anything in the queue. I come into the office and get jumped on by partner's PA about why the problem hasn't been fixed. Fix it in 5 minutes for the partner as it sounds like he hasn't had a great morning. I now have a recording of the call, this should be an interesting listen.
|
# ? Feb 2, 2017 06:17 |
|
Emails didn't come in. Monday at 3:40pm mail went down. The helpdesk got some calls and...emailed the server room. I'm the Jr sysadmin and was out sick, the Sr went home for the day at 3:30. Things worked fine on network or on the vpn, but not otherwise (nothing could hit the webmail proxy from off our network). The helpdesk emailed the server room list but of course neither of us saw it because we were off-site. Helpdesk manager didn't hit up the on-call numbers. Me and the Sr separately noticed around 7pm. We're currently running onprem exchange 2013 in hybrid and ramping up moving people to O365 and there was a large-ish move of people (40?) on Monday. Something like 300 of 3000 boxes have been moved so far. Over the weekend before, we had logged a LOT of attacks on our domain admin accounts which finally calmed down and ceased on Monday morning (they are well secured and this happens once in a while). Exchange consultant who built the cluster was called. Tons of connection resets reported on the cluster. Firewall Stack looked ok but had failed over (everything else behind it and talking through it worked). Failing it back over to primary fixed mail for about 15 minutes then it went down again. Decided couldn't do anything that night so slept on it. Tuesday morning, the consultant who set up the sonicwall HA pair was called (4600's) and we went through upgrading firmwares and checking everything. All looked ok. Tried running on one, or the other server the cluster or one or the other firewall and the problem continued. The only thing that seemed to fix it for any length of time was making any change to the sonicwall stack. Exchange and sonicwall consultants stumped. Calls went in to sonicwall and microsoft. Both blamed each other. Exchange consultant starts to think the cluster might be compromised somehow so virus scans are run. Found nothing, didn't feel like that was it anyways. After the firewalls were updated, our uptime went to about an hour before going down so it was left at that for Wednesday night since we could just reboot the things and be back up for another hour to keep people happy. Being home sick I was mostly out of the minute-to-minute but also being off site I could watch connection changes and reported them if I wasn't passed out. Talked to the Sr and brainstormed possibilities and got updates every so often and still the only thing that really changed was those mailbox moves to the cloud which I always pointed back to as being the root cause, even if wildly indirectly. This ended up being the case. The problem was found and fixed early Wednesday morning. What was it? Running hybrid exchange we have to keep autodiscover pointed to our onprem servers until all mailboxes are moved (people really whine when they have to manually enter stuff for their mobile devices). Cloud mailboxes cause a lot more connections than onprem, and the last batch of moves brought us over the magic number windows built-in firewall could handle, it would max out and poo poo itself. Windows firewall turned off and its all peachy. 32k was the number thrown around. They're behind hardware and on an isolated network from other stuff so they're pretty safe. Windows stuff was on as extra precaution since some developers also have vpn access back there. Even as stressful as it would have been, I would have preferred being at work instead laid up with this awful stomach bug. Felt better today though, just in time for everything to be fixed
|
# ? Feb 2, 2017 07:37 |
|
Isn't Windows Firewall off by default on server 2008/2012?
|
# ? Feb 2, 2017 09:34 |
|
Collateral Damage posted:Isn't Windows Firewall off by default on server 2008/2012? I doubt it, it's on by default in 2016. Haven't setup an earlier OS in a bit, but I'm pretty sure 2008 and 2008 R2 also had it enabled would be weird for 2012 not to.
|
# ? Feb 2, 2017 11:16 |
|
Collateral Damage posted:Isn't Windows Firewall off by default on server 2008/2012? Definitely enabled by default in 2012 R2.
|
# ? Feb 2, 2017 12:41 |
|
Enterprise-wide email: Hey everyone, we're upgrading to Office 2016 by the end of First Quarter. Here are some awesome online training resources, and also some quick start guides for Word, Excel, and Outlook. Multiple C-Levels in Multiple Important Meetings: I HAVE HEARD AWFUL THINGS ABOUT WINDOWS 10 WHY ARE WE SWITCHING TO WINDOWS 10 CAN I OPT OUT MY TEAM THIS IS BAD Edit: We are in fact upgrading to Windows 10 but much later this year, and we haven't said a peep about it publicly.
|
# ? Feb 2, 2017 15:06 |
|
I wish we sent out emails when we upgraded people to new Office. We just do it and tell them to STFU.
|
# ? Feb 2, 2017 15:11 |
|
He internet is still out. The solution is that the AT&T router doesn't have the port configured correctly for the new circuit. I've been telling them this for months. No one will check the port configuration. Kill me.
|
# ? Feb 2, 2017 18:21 |
larchesdanrew posted:He internet is still out. Escalate repeatedely
|
|
# ? Feb 2, 2017 18:24 |
|
ConfusedUs posted:Escalate repeatedely I think that repeated de-elevation of a hammer would work to solve the problem more.
|
# ? Feb 2, 2017 18:40 |
|
larchesdanrew posted:He internet is still out. Scream incoherently into the phone until you get someone on the phone that isn't an idiot.
|
# ? Feb 2, 2017 18:40 |
|
I have a tech out here who agrees. We seriously can't find one single person in the organization who is willing to give us the login credentials to the router. This is absurd.
|
# ? Feb 2, 2017 18:49 |
|
larchesdanrew posted:I have a tech out here who agrees. We seriously can't find one single person in the organization who is willing to give us the login credentials to the router. Well clearly you are getting a free replacement and a free month of service for all the trouble! See if the tech can make at least the first part happen.
|
# ? Feb 2, 2017 18:50 |
|
A whole bunch of projects came in: We have a developer on our team who is generally a good developer, but she has been a bit flaky for the past year, and I've had to pick up the pieces on projects she has dropped the ball on due to personal/family issues. She has now been AWOL for about 2 weeks now. No one has heard from her or been able to get ahold of her, including my manager. Every project that she was working on just got assigned to me, on top of the stuff I'm already assigned to. Whee.
|
# ? Feb 2, 2017 19:13 |
|
larchesdanrew posted:I have a tech out here who agrees. We seriously can't find one single person in the organization who is willing to give us the login credentials to the router. Take a hammer to it.
|
# ? Feb 2, 2017 19:22 |
|
Khisanth Magus posted:A whole bunch of projects came in: By "AWOL for 2 weeks" you mean "Fired for job abandonment," right? And also all your projects take precedent over hers, and they have a revised timeline?
|
# ? Feb 2, 2017 19:24 |
|
|
# ? Jun 5, 2024 04:04 |
|
Avenging_Mikon posted:By "AWOL for 2 weeks" you mean "Fired for job abandonment," right? And also all your projects take precedent over hers, and they have a revised timeline? I'm assuming she is going to be fired, although she hasn't officially been at this point to my knowledge. And hahahahaha @ the projects having revised timelines. That is amusing.
|
# ? Feb 2, 2017 19:37 |