|
My wife wants Ryobi's hand vac. for the car to go with the batteries in the drill her grandfather left and my backup tools. So I ordered the $99 set of lantern, quarter sheet sander, jigsaw, and vacuum from Home Depot. Don't much care if the sander is crap, gonna give it to her since she wants to learn drywaling in a room that needs it. Oughta do fine for at least making life easier after mudding. Then I'll have a cheap lantern and beater jigsaw the kids can learn on to save the corded Bosch I still need to buy.
|
# ? Jan 16, 2019 01:27 |
|
|
# ? Jun 8, 2024 09:37 |
|
Butch Cassidy posted:My wife wants Ryobi's hand vac. for the car to go with the batteries in the drill her grandfather left and my backup tools. So I ordered the $99 set of lantern, quarter sheet sander, jigsaw, and vacuum from Home Depot. Don't much care if the sander is crap, gonna give it to her since she wants to learn drywaling in a room that needs it. Oughta do fine for at least making life easier after mudding. Then I'll have a cheap lantern and beater jigsaw the kids can learn on to save the corded Bosch I still need to buy. Good lord, don't use any kind of power sander, even a lovely one to sand drywall....unless it's got some sort of monstrous vacuum attached to it.
|
# ? Jan 16, 2019 02:12 |
|
I just know her well enough that she's going to try it since it'll be right there, next to the drill. Best she does so with a cheapie. The kids'll be easy enough t hand a sanding block and tod to put some elbow into it.
|
# ? Jan 16, 2019 03:51 |
|
Mr. Mambold posted:Good lord, don't use any kind of power sander, even a lovely one to sand drywall....unless it's got some sort of monstrous vacuum attached to it. Disagree (partially.) I use the Horrible Freight oscillating multitool (lauded/jeered upthread) with a triangle sanding pad for drywall finishing, and it has changed my life. It's especially useful for tight areas and patches, which is the bulk of my drywall fixes. That said, one hand holds the sander, and the other holds the nozzle of a shop vac where it can grab the Tony-Montana-sized piles of white powder flying off. Drywall sanding is messy business no matter what, and if I'm going to be rapidly moving my arm up and down for 10 minutes, it's not going to be holding a sanding block.
|
# ? Jan 16, 2019 03:54 |
|
I need a new Random Orbit Sander. I have a simple Bosch one, which is fine, but I think its time to upgrade to a nicer one with variable speed. I'm still very upset I never got the cheap Festool PRO 5 LTD Sander they sold for $100 like 2 years ago. They never brought it back at that price either.
|
# ? Jan 16, 2019 16:49 |
|
Cross-posting from the home ownership thread. If anyone isn't already bought into a power tool system, Home Depot has a killer deal going on right now in their stores. Check the website to see if your location has this item: https://www.homedepot.com/p/Ryobi-1...P1837/305439006 If they do, you can get it and any two items from an extensive list of bare tools and batteries for $199 total. That's 5 tools and two batteries for under $200. You can also use this deal to expand your tool collection. When you buy a multiple tool deal like this in store, the receipt should list a maximum refund value, which is based on the percentage of the total before the free tool discount. You can then return one or two of the items and get that amount back. Put simply, if you buy the kit and get two $99 tools for free, you can return the tools and get $50 a piece back bringing the kit to $100. Truth be told, you can probably craigslist or eBay some of the extra tools for more than the return value, so that might be a better option as well.
|
# ? Jan 17, 2019 04:06 |
|
BeastOfExmoor posted:Cross-posting from the home ownership thread. I just bought this deal. Worth noting that these are all the new brushless tools. Haven't had time to compare performance, but the benefits of brushless sure sound great on paper. I went with the jigsaw and recip saw as my two adds for all the cutting power.
|
# ? Jan 17, 2019 15:50 |
|
BeastOfExmoor posted:Cross-posting from the home ownership thread. You sure that's right right deal? All the ones with the free tools are showing to me as separate deals for $229: Maybe it's just my local store has a higher price point? I wish I had Ryobi stuff already, because I'd totally do it for two free tools that I don't have, then return the drill+driver+saw "core" kit since I already have those (and a couple other things) for Makita. But if I did that, I'd then have to still get a battery+charger set for the two tools I was left with. Or go all in on Ryobi and try to sell my Makita stuff to get the money back... DrBouvenstein fucked around with this message at 16:26 on Jan 18, 2019 |
# ? Jan 18, 2019 16:24 |
|
DrBouvenstein posted:You sure that's right right deal? All the ones with the free tools are showing to me as separate deals for $229: I personally would keep the Makita as it’s a lot higher quality. They have similar sales on Makita around the Christmas holiday and Father’s Day.
|
# ? Jan 18, 2019 16:57 |
|
DrBouvenstein posted:You sure that's right right deal? All the ones with the free tools are showing to me as separate deals for $229: The website shows only the pre-chosen kits and that's the only way you can buy them online. In-store the 3 tool kit should be $199 and you can choose from any of the eligible tools for free. Here's some photos of the eligible tools: https://slickdeals.net/forums/showpost.php?p=124534996&postcount=141
|
# ? Jan 19, 2019 20:29 |
keep it down up there! posted:I need a new Random Orbit Sander. I have a simple Bosch one, which is fine, but I think its time to upgrade to a nicer one with variable speed. I got this Bosch and am fairly happy with it. Variable speed, two different sized pads and even when I lean reasonably heavily on it it doesnt bog down. The only thing that annoys me is the bit where you attach your dust collection to is not a standard fitting so you have to bodge something together. NPR Journalizard fucked around with this message at 07:12 on Jan 21, 2019 |
|
# ? Jan 21, 2019 07:09 |
|
Ryobi 4-tool kit arrived. Jigsaw - Sucks. But much better foot than my old Craftsman with comparable power, weight, and better blade tracking. Primary complaint would be the on/off trigger with speed control via drum on top ot the handle. Really just has me itchy to get my chainsaw and some kid tools out of the way so I can get around to a corded Bosch on the priorities list. Quarter sheet sander - Is quarter sheet sander with some attempt at dust mitigation. We'll see how it holds up to my wife's currently low use as I gave it to her. Hand vacuum - Works well so far. Still spoiled by my grandmother's awesome corded old handheld sweeper vac. that finally gave up the ghost but it doesn't seem any jankier than most current cordless. 330 lumen lantern with USB phone charging port - This will come in handy what with my pootly lit old mill house lacking both lighting and sufficient outlets. I'd say the kit was worth it for this with the rest considered as filler to justify the price. Phone battery is low so gonna check the charging after hitting post. And there's the first impressions no one cared about regarding Ryobi's grab bag of what feels like random old models they want off their hands. Wouldn't suggest it unless you specifically want something within for aome reason. Wife wanted the vacuum and I currently have an urge to assemble some lighting that uses my cordless tool batteries so it was a good buy. Can't really complain about the beater saw and clunky sander when they were all but free if going by the cost of buying bare tools individually.
|
# ? Jan 22, 2019 04:16 |
|
Does anyone have a jigsaw they are happy with? I have the ryobi mentioned above and agree with the assesment.
|
# ? Jan 23, 2019 05:37 |
|
sweet_jones posted:Does anyone have a jigsaw they are happy with? I have the ryobi mentioned above and agree with the assesment. Brushless model or no?
|
# ? Jan 23, 2019 05:44 |
|
sweet_jones posted:Does anyone have a jigsaw they are happy with? I have the ryobi mentioned above and agree with the assesment. I mean if you want a stronger saw, a reciprocating saw should do the job.
|
# ? Jan 23, 2019 06:29 |
|
I just picked up a 99 ford ranger that I'm going to start doing some work on. One of the things I've been meaning to buy is a torque wrench. If I'm doing automotive type stuff, is the cheap rear end harbor freight one good enough, or do I go middle or top of the line?
|
# ? Jan 23, 2019 16:16 |
|
HF torque wrench is fine
|
# ? Jan 23, 2019 16:30 |
|
HF torque wrenches are one of their better values, and the vast majority of automotive fasteners allow for a much greater tolerance on torque than the HF wrench needs.
|
# ? Jan 23, 2019 18:34 |
|
AFewBricksShy posted:I just picked up a 99 ford ranger that I'm going to start doing some work on. One of the things I've been meaning to buy is a torque wrench. What's up, 99 Ranger buddy? (Ok, technically I have a Mazda B4000, but it's the same truck.)
|
# ? Jan 23, 2019 21:56 |
|
DrBouvenstein posted:What's up, 99 Ranger buddy? I actually just found that out when I got the Haynes manual in the mail today. It’s an awesome little truck. I picked it up last Wednesday. AFewBricksShy fucked around with this message at 12:00 on Jan 24, 2019 |
# ? Jan 24, 2019 01:15 |
|
Picked up my 2000 4x4 v6 back in Octoberish, $300, driveable but needs a clutch and a couple leaks fixed. Slated to be a spare truck/beater/hunting truck so I can keep my Colorado nice.
|
# ? Jan 24, 2019 02:46 |
|
Hell yes, good trucks.
|
# ? Jan 24, 2019 04:37 |
|
sweet_jones posted:Does anyone have a jigsaw they are happy with? I have the ryobi mentioned above and agree with the assesment. I like my corded Dewalt DW331K, it's powered through a fair bit of 1/4" mild steel and 7000-series aluminum and the only damage was to my hearing. I particularly like the speed control, you can set a limit and ease into it, which is nice for starting. Blade changes are easy, just pull the lever and the hot blade drops on the floor. My only complaint is that on really thick wood it doesn't quite cut square and it's probably because the guides aren't super rigid. Maybe Bosch does that better, it looks like their side support is better.
|
# ? Jan 24, 2019 20:56 |
|
So I need someone to explain to me why a Stanley No. 6 has no real benefit over a No. 5. (I should really spend less money on beautiful antique hand tools)
|
# ? Jan 25, 2019 08:42 |
|
Blistex posted:So I need someone to explain to me why a Stanley No. 6 has no real benefit over a No. 5. (I should really spend less money on beautiful antique hand tools) The No 5. or "Jack" plane can be used for lots of different things, roughing, smoothing, flattening, jointing. The 6 gives you quite a bit more length which is good for surface flattening and edge jointing. If you arent going to flattening large surfaces you really wouldnt need the 6. Get both, regardless.
|
# ? Jan 25, 2019 14:48 |
|
If anyone is interested in picking up a saw stop saw, do it before Friday, a price increase is going into effect on 2/1. https://www.highlandwoodworking.com/sawstop-price-increase.html
|
# ? Jan 28, 2019 13:24 |
|
AFewBricksShy posted:If anyone is interested in picking up a saw stop saw, do it before Friday, a price increase is going into effect on 2/1. I wonder if this has to do with being owned by Fe$tools or that under the Festools name a "cheap" flesh tech saw is being released.
|
# ? Jan 28, 2019 17:32 |
|
Well thats a bummer. Im looking into buying one, but not for another 2-3 months
|
# ? Jan 28, 2019 17:35 |
|
JEEVES420 posted:I wonder if this has to do with being owned by Fe$tools or that under the Festools name a "cheap" flesh tech saw is being released. I don’t know but it was enough to make me finally pull the pin. That, plus it being available in Delaware (tax free shopping) plus some visa gift cards from Christmas means I have safe fingers now. I also picked up the dust collection port too. I went to woodcraft to pick it up. It would be trivially easy to spend about a million dollars in that place, it’s amazing. AFewBricksShy fucked around with this message at 23:50 on Jan 28, 2019 |
# ? Jan 28, 2019 23:48 |
|
If you have $75 extra pick up a spare break since those are going up too. Not saying you will trip it but if you do doesn't hurt to have a spare break on hand. Also make sure you look over the no cut list, anything conductive in the slightest can trigger the break.
|
# ? Jan 29, 2019 00:22 |
|
JEEVES420 posted:If you have $75 extra pick up a spare break since those are going up too. Not saying you will trip it but if you do doesn't hurt to have a spare break on hand. Also make sure you look over the no cut list, anything conductive in the slightest can trigger the break. First thing you should do to make sure it works is run a hotdog through it, good idea or great idea?
|
# ? Jan 29, 2019 00:58 |
|
do those still work on disposable cartridges? I thought they invented one that was re-useable.
|
# ? Jan 29, 2019 01:43 |
|
MRC48B posted:do those still work on disposable cartridges? Bosch had one that simply dropped the blade below the table instantly, but I think SawStop sued it away. Edit: Apparently the lawsuit is still going, and Bosch is still selling it. Slugworth fucked around with this message at 01:54 on Jan 29, 2019 |
# ? Jan 29, 2019 01:48 |
|
SawStop-We want to save everyone’s fingers by making sure that nobody else can save any fingers.
|
# ? Jan 29, 2019 04:27 |
|
Didn’t the inventor try to license the technology to established saw manufacturers and they told him to gently caress off so he started his own company?
|
# ? Jan 29, 2019 07:28 |
|
Platystemon posted:Didn’t the inventor try to license the technology to established saw manufacturers and they told him to gently caress off so he started his own company? The guy has always struck me as a bit of a dick. It's fine if he wants to save people's fingers, but then be a bit more reasonable with your licensing expectations. And alternatively, it's fine if you wanna get filthy rich off your invention, but then stop trying to legally mandate your richness under the guise of being worried about people's fingers.
|
# ? Jan 29, 2019 13:27 |
|
Slugworth posted:Bosch had one that simply dropped the blade below the table instantly, but I think SawStop sued it away. The Bosch didn't ruin the blade, the SawStop does. They both use disposable cartridges, but with the Bosch, you get two firings per cartridge. Also, Bosch is still selling their Reaxx saw internationally, but SawStop got an injunction preventing Bosch from selling the saw in the US.
|
# ? Jan 29, 2019 14:10 |
|
Yeah, my impression of the SawStop inventor is that they legitimately did come up with an important new safety measure, but then they tried to use it to get rich in the most hamfistedly evil way possible. I can appreciate not wanting to be exploited by the companies you license the tech to, but dude you really need to get better at negotiating. Or hire someone who's better at negotiating.
|
# ? Jan 29, 2019 15:26 |
|
Harry Potter on Ice posted:First thing you should do to make sure it works is run a hotdog through it, good idea or great idea? gently caress him, I use my bandsaw for frozen meat. You can take my bandsaw when you pry my cold dead buffalo wings off it.
|
# ? Jan 29, 2019 17:25 |
|
|
# ? Jun 8, 2024 09:37 |
|
Mr. Mambold posted:gently caress him, I use my bandsaw for frozen meat. You can take my bandsaw when you pry my cold dead buffalo wings off it. Valid use case checks out:
|
# ? Jan 29, 2019 17:29 |