|
SUPERMAN'S GAL PAL posted:Is that whole thing quartz? Can a big sheet of crystals with custom colors be produced these days? Quartz the countertop material is manmade. Assuming that shower wall is equally manmade. It's still gorgeous, though I could do without the gold fixtures and trim.
|
# ? Mar 19, 2019 00:34 |
|
|
# ? Jun 3, 2024 21:44 |
|
SUPERMAN'S GAL PAL posted:Is that whole thing quartz? Can a big sheet of crystals with custom colors be produced these days? I got curious, so I went looking for the designer, and found out that that's a vinyl decal of a picture of agate over a fiberglass panel, coated with epoxy resin. Absolutely cool idea, and beautifully executed. A bit disappointed to find out it isn't actually stone, but I'm impressed with its cleverness
|
# ? Mar 19, 2019 00:44 |
|
I mean lol. Obviously that's not a real piece of stone?! Imagine how awful you'd have to be to be rich enough to have a piece of stone like that and waste it in a shower like that. I would think this thread, more than any, would understand a decent bathroom when it saw one.
|
# ? Mar 19, 2019 00:48 |
|
Does a geode that big even exist? Like, in a museum or otherwise?
|
# ? Mar 19, 2019 00:53 |
|
NotJustANumber99 posted:I mean lol. Obviously that's not a real piece of stone?! Imagine how awful you'd have to be to be rich enough to have a piece of stone like that and waste it in a shower like that. I would think this thread, more than any, would understand a decent bathroom when it saw one. I see slabs of countertop stone that big at stone wholesalers' yards all the time. Carrera marble is generally the most expensive natural stone people regularly use for countertops, and it sells at $50+/- per sq ft (generally). Visually, the wall pictured in the shower looks to be 9-10'X6' or about $2700-$3000 to do in a single piece of actual marble. I know that my perception is colored by the fact that I deal with very rich people every day, but that is not prohibitively expensive. People spend double and triple that on kitchen countertops alone
|
# ? Mar 19, 2019 01:01 |
|
Geodes around that size exist and they are worth millions upon millions of dollars.
|
# ? Mar 19, 2019 01:03 |
|
People make designs with, like, poly on countertops like that. So there might be more than one way to get your rock crystal wall done.
|
# ? Mar 19, 2019 01:04 |
|
mutata posted:Geodes around that size exist and they are worth millions upon millions of dollars. Well, that would explain why I've never seen agate slabs lol
|
# ? Mar 19, 2019 01:14 |
|
value-brand cereal posted:
How long does it take to charge it
|
# ? Mar 19, 2019 01:49 |
|
HardDiskD posted:How long does it take to charge it A JO crystal that size? You'd have to whack your meat for about 30 years without stopping to charge it up.
|
# ? Mar 19, 2019 01:55 |
|
Pigsfeet on Rye posted:
Look at this thing, you gotta be inserting something into that gaper.
|
# ? Mar 19, 2019 02:16 |
Pigsfeet on Rye posted:A JO crystal that size? You'd have to whack your meat for about 30 years without stopping to charge it up. Sweet, almost there
|
|
# ? Mar 19, 2019 02:22 |
|
Breath Ray posted:id love to read a post like that I'm a bit tipsy after grilling dinner while sippin', but I'll start off with my boiled down version: I love metal. I want to make some tables and chairs. Excuse me if I ramble. I work in a metal shop and have an intrinsic appreciation for the material. Mild steel, aluminum, and stainless steel are the three metals I (and most) work with all the time. It shapes the way I think. I look at every piece of metal construction critically. I judge the way it's put together, the welds, the geometry of the joints, the intent behind it. Metal tends to be used in very function-first applications. It has a job to do and it will do that job first and foremost. I-beams in a skyscraper, guard rails on a road, bulkheads of the Staten Island ferry, chassis of your car. Metal is a functional material. Thinking of furniture like chairs and tables, you see a lot of wood, leather, and woven fabric. Not that these materials can't be strong, but I'd say they're form over function. The role of each can be taken over by another material in a better way. Didn't FLW make chairs out of plywood because it made it accessible? I'll admit, I was just looking at mid century modern furniture one day in a google/youtube rabbit hole. You know how it is, start looking at stuff and get lost looking at more and more. Usually when I do this, I get into the mindset of "Well I don't need to buy this, I can just make it." I'm not saying I have the ability to do it, but that's where my mind goes to. Now with my job, I get to thinking about making everything out of metal if possible. It's just where I'm at, how I work, and how I think. If you look up "metal furniture" right now, you're gonna see a lot of poo poo made with 2" square tube or industrial bullshit like that. I don't think there's necessarily anything wrong with that, but it's not my cup of tea at all. Stools made with 2" square tubing and not trying to hide that at all. A dining room table made with I beams and thick-rear end reclaimed dinged up pine isn't a look for me either. There's something about using metal stock as-is that bothers me. I don't know why it is. It just looks so off the shelf, maybe? Then there's the tables that want to look like they're using a big gently caress-off piece of 1890's industrial steam-driven heavy machinery as a base for your loving dining room table. But now I'm thinking back to the mid century modern stuff. How would metal work as mid century modern? Yeah, there are metal MCM pieces, but for the most part, those are exceptions. Mid century modern pieces are, I guess, stereotypically made of wood frame with a stain finish or otherwise grain present. Metal can be textured kind of however you want, and it's something I've been playing with a lot recently. Sanding, burnishing, polishing, sandblasting, all in a way to make the same alloys look and feel differently. Something else I've really noticed about the MCM furniture is the shape of the structure. Metal furniture, like I said before, tends to be made of stock material, like 2" square tube, round tube, or other quickly identified stock. Something like the z chair has a very angular structure but look at those dang intersections! The joints are not where the natural intersections are. And how can you even tell where the intersections are? Because of the wood grain and color. Now if you constructed the "same" thing of metal, I'm sure you could replicate the angles with square or rectangle tubing, cut on a bandsaw, and weld together without too much trouble at all. But look at the shapes of each individual element! There are tapers and compound contours that would make your french curve blush at your drawing board. Some art deco or industrial metal pieces look to be solid extrusions and kind basically be understood in totality in (two) 2D projections, whereas MCM pieces have enough complex compound geometry that they can and should be found interesting from many angles. I've got it stuck in my head that I'm going to recreate mid century modern furniture in a material that is not conducive to that goal. Unless you work in solid metal, you can't really just shave away bits and bits and slivers of material until you get the profile you want. Not only would it be time-consuming and expensive, it would be heavy as gently caress. I feel the need to make something as compelling in a material considered inferior for the task. I need to make an interesting texture while also considering the very fun aspect of how it will be constructed. Something like splayed legs for a nightstand might not be too complicated, but well, some forms might be tougher to force on to a functional material like steel or aluminum. And yeah, some things might be completely derivative and/or straight up copies, but I'm not selling poo poo for profit, this is for adventures sake.
|
# ? Mar 19, 2019 03:28 |
|
Pigsfeet on Rye posted:
I guess we know why it’s located in a shower then.
|
# ? Mar 19, 2019 04:01 |
|
Sending love to the former owners of my new house that glued down carpet on the heart pine floor forever ago, ripped it up and proceeded to put down some other carpet. It’s all getting removed and refinished you fools, it wants to be free. https://imgur.com/a/Hv4CCBF And the loving poo poo laminate in the kitchen is going too!
|
# ? Mar 19, 2019 04:59 |
|
Rotten Cookies posted:I want to make some tables and chairs. I got a haircut this morning and the shop was completely furnished from this company, they must have spent $30,000 on all the tables, shelves, racks and chairs. https://www.truck-furniture.co.jp/furniture/index.html They also had a TRUCK shop supply catalog, full of $300 plain racks and $100 coat hooks. Sorry this is the only example they have online. https://www.truck-furniture.co.jp/shop/products_oth0009.html This is probably different than what you're hoping for, but go for it!!! Make things! Someday you can separate coffee beardos from lots of money. peanut fucked around with this message at 05:12 on Mar 19, 2019 |
# ? Mar 19, 2019 05:09 |
|
Pigsfeet on Rye posted:
Is this too long for a thread title? Because I love it.
|
# ? Mar 19, 2019 06:25 |
|
Interior Design Thread: Look at the beautiful marbling of my J/O crystal prison.
|
# ? Mar 19, 2019 06:26 |
|
value-brand cereal posted:
I just wanna point out that there are three showerheads
|
# ? Mar 19, 2019 06:37 |
|
Rotten Cookies posted:Thinking of furniture like chairs and tables, you see a lot of wood, leather, and woven fabric. Not that these materials can't be strong, but I'd say they're form over function. The role of each can be taken over by another material in a better way. I like the rest of your post but I gotta take issue with this- we use those materials because they are also warm and soft and behave as insulators in ways that metal generally does not.
|
# ? Mar 19, 2019 07:35 |
|
My brain was trying to make a point of metal=strong, monolithic, utilitatian Leather/wood/fabric=comfortable, organic, not (as) strong. Then going back and saying "but what if I were to try and make more organic looking metal tables and poo poo?" not trying to make a point that those materials are all inferior and shouldn't be used. Best I got for ya.
|
# ? Mar 19, 2019 09:17 |
|
The monobloc chair is a triumph of functionalism.
|
# ? Mar 19, 2019 09:36 |
Rotten Cookies posted:I'm a bit tipsy after grilling dinner while sippin', but I'll start off with my boiled down version: I love metal. I want to make some tables and chairs. Excuse me if I ramble. That was a good ramble. Anyone interested in metal furniture will probably enjoy this podcast episode about this chair.
|
|
# ? Mar 19, 2019 09:49 |
|
Turtlicious posted:Interior Design Thread: Look at the beautiful marbling of my J/O crystal prison. My geode must be acknowledged
|
# ? Mar 19, 2019 10:10 |
Urcher posted:That was a good ramble. Can confirm this podcast is good
|
|
# ? Mar 19, 2019 11:32 |
|
Electric Bugaloo posted:I like the rest of your post but I gotta take issue with this- we use those materials because they are also warm and soft and behave as insulators in ways that metal generally does not. Unless you put them in the sun, where they will burn the gently caress out of you, much like the metal playground slides of my childhood. 99% Invisible is one of the two best podcasts out there (the other one is Reply All but they don't really do much in the way of design and so are exempt from this conversation).
|
# ? Mar 19, 2019 13:13 |
|
Rotten Cookies posted:My brain was trying to make a point of One of my greatest regrets is not buying this amazing cast iron chair I saw at a flea market for 200 bucks. I will forever be attoning for this. I would be all over a patio set made of square stock in a danish mid century style. And it's infinitely re-styleable, just rattlecan it whatever style is in at the moment, or strip it back to raw and clearcoat it when the distressed look comes back in a 100 years.
|
# ? Mar 19, 2019 14:23 |
|
First project. Excuse my loving mess of a shop. A small coffee table roughly 30" across. Made of 3/32" aluminum sheet and 1/2" aluminum roundbar. Not anything wild, really, but I wanted to get my feet wet. I liked the idea of splayed legs, and really went for the typical wire-leg table that you see. Those legs are usually painted, and typically with a wood top. Like I said, I wanted to try and showcase the metal I made it with. No matter how much I sand and get it looking good in person, the camera really shames me and makes the surface look like, well..... that. Good thing I'm not a furniture maker, but this first project was fun and humbling. It now sits in the reception area of my shop's office and made the secretary very happy, so I'm happy. My next project in mind is another coffee table and is a bit more...... ambitious. EDIT: ^^^^ Something like this? Rotten Cookies fucked around with this message at 15:28 on Mar 19, 2019 |
# ? Mar 19, 2019 15:24 |
|
Pigsfeet on Rye posted:
that's why you JO with a bro, duh. solo JOing produces very little power
|
# ? Mar 19, 2019 15:36 |
|
Rotten Cookies posted:
The edges remind me of cafeteria trays, I like it though. Polishing that up with a series of grits would take a frustrating length of time, then someone would go and put something on it, maybe lacquer it?
|
# ? Mar 19, 2019 15:42 |
|
Nice! How much does the top flex? I'd think that 3/32" aluminum would have some give to it, but maybe it's more rigid than my imagination expects. As someone who works with clay, I sympathize on the photography front. Shiny stuff (like metal or glazes) just doesn't photograph well without a lot of careful setup.
|
# ? Mar 19, 2019 16:00 |
|
The cafeteria tray bends make it a bit more rigid, but by virtue of being thin aluminum it's still gonna flex if I put my weight down on it. And it totally does remind me of a lunch tray, but gently caress it, I ran with it. It's gonna get destroyed even in the reception area because the guys coming back from the field are gonna be throwing all sorts of dirty, heavy poo poo on it. I wanted it to look nice, but I'm not gonna be wasting too much time on it. Next table is gonna be for me personally, so it's gonna get a bit more care. Thanks for the replies and looking at my dumb words and beginner table.
|
# ? Mar 19, 2019 16:18 |
|
God drat I'm in love with those epoxy resin shower wall treatments.
|
# ? Mar 19, 2019 16:37 |
|
Urcher posted:That was a good ramble. this is the #3 on the 'poo poo I see fake copies of all over' list, next to the eames dsw and the tolix stools
|
# ? Mar 19, 2019 17:32 |
|
Urcher posted:That was a good ramble. Enjoyable pod, up until the talk of these jokers claiming ownership of the design and suing people over a chair designed in the 40s by someone who’s now dead. IP rights should not be perpetual, get hosed emeco.
|
# ? Mar 19, 2019 19:32 |
|
wooger posted:IP rights should not be perpetual, get hosed emeco. You’re helping the by using the term “intellectual property”. It’s a false analogy to land and personal property.
|
# ? Mar 19, 2019 19:40 |
|
or how about companies just make some decent original designs instead
|
# ? Mar 19, 2019 20:18 |
|
PRADA SLUT posted:or how about companies just make some decent original designs instead They fired all their artists years ago as an unnecessary and unpredictable expenditure.
|
# ? Mar 19, 2019 20:20 |
|
Platystemon posted:You’re helping the by using the term “intellectual property”.
|
# ? Mar 19, 2019 20:21 |
|
|
# ? Jun 3, 2024 21:44 |
|
Functional things like furniture and clothes can't be copyrighted, so the only IP protections available are patents (invent a novel way of putting together a chair?) and trademark (create a distinctive look that is not derivitive of prior art and is clearly indicitive of your brand). The latter is very very difficult, which is why for example fashion designers sometimes try to work a unique print with their trademarked logo into it, or based on an original work of art for which they have copyright, to prevent it being re-used. For all practical concerns though, there is no functional intellectual property right to a furniture design. You can argue that perhaps there ought to be, or that people reproducing your design are "ripping you off," but this is the reality we all have lived in for a couple of centuries and it's not likely to change any time soon.
|
# ? Mar 19, 2019 20:30 |