|
FAUXTON posted:https://drinkarchetype.com/collections/archetype-coffee/products/competition-series-finca-inmaculada-coffee-eugenioides Nice. Bit rich for my blood to import, but I’d consider if I could roast it myself. Really cool stuff. Between this and C. charrieriana, interesting times.
|
# ? May 15, 2020 21:05 |
|
|
# ? Jun 8, 2024 07:39 |
|
Munkaboo posted:What's your Budget? Probably not more than $200. I was leaning towards the Knock Aergrind given it’s good value.
|
# ? May 15, 2020 21:37 |
|
i own every Bionicle posted:Thanks! I’ll do my next coffee order from them and get a bag. Perhaps if interest in it grows enough we’ll see it become more available. I used a clever dripper for the same reason but I had the wrong idea of how fast it'd drain so the extra minute I gave it steeping was lost in how fast it drained.
|
# ? May 15, 2020 21:49 |
|
i own every Bionicle posted:Please post if and when you find it, I’d love to try it too. Onyx had one very recently - sign up for their newsletter and grab it next time. I wish I had grabbed it.
|
# ? May 16, 2020 00:40 |
|
Red_Fred posted:Probably not more than $200. I was leaning towards the Knock Aergrind given it’s good value. Get a Helor, Commandante mk3 or a Lido.
|
# ? May 16, 2020 00:40 |
|
James Hoffman tested all the fancy ones and he likes the Kinu the best overall. But he also says they are all very similar in performance so I'd get the cheaper one. I love my LIDO but adjusting the grind size is a pain in the rear end to the point where I don't do it anymore. I'd probably avoid the Kinu for now as well because they want to charge another $40 to get a pour over burr upgrade. The default burrs are designed more for espresso. https://www.youtube.com/watch?v=dn9OuRl1F3k Mu Zeta fucked around with this message at 01:00 on May 16, 2020 |
# ? May 16, 2020 00:57 |
|
Ive got the Lido E but would definitely prefer the commandante or Helor.
|
# ? May 16, 2020 14:24 |
|
red19fire posted:I’ve been using the same metal pour over filter for several years. (I think it was by Hario but it’s similar to this one) I keep it clean, soap and water after every use, occasional dishwasher cycle. Lately, it completely clogs up about halfway through the pour process. It flows fine for the first minute, then slows to a drop at a time until it stops entirely with 1/4 of the water left in the basket. I have no experience with this particular issue, but have you tried using Bar Keeper's Friend? It tends to be pretty good at cleaning metal kitchen things.
|
# ? May 16, 2020 20:35 |
|
It's recommended to pretty much always roast outdoors, right? Do most people start out with a whirley pop?
|
# ? May 17, 2020 22:26 |
|
Munkaboo posted:It's recommended to pretty much always roast outdoors, right? If you don't, you'll set off smoke detectors in the best case and smoke out your house (in a bad way) in the worst case...unless you have a practically commercial vent hood. It's pretty gnarly. Popcorn machines can work, but so will a metal bowl and a heat gun (the latter will let you do slightly larger batches).
|
# ? May 18, 2020 03:14 |
|
I've got two kids at home with quarantine and zero time but I do wanna get into it. Seems like good options are: Whirley pop and buy electric hot plate Hot air popper Bowl and heat gun Comedy buy a behmor Thoughts?
|
# ? May 18, 2020 03:28 |
|
Whirley pop is great, but if you don't have a stove then idk.
|
# ? May 18, 2020 03:36 |
|
I've got a stove, just wouldn't want to use my indoor stove for it for reasons mentioned above.
|
# ? May 18, 2020 03:41 |
|
I point a box fan out the window, turn my hood fan on high, and take the battery out of the smoke detector. But I live by myself so YMMV.
|
# ? May 18, 2020 03:54 |
|
I did popcorn machine to start probably 20-30 times but then quickly moved to heat gun / dog bowl. I went from roasting 100g to 300g. Much more convenient, better roasts I found. Also you can ramp the heat up or down with a heat gun, which you can't really do as well with the popcorn machine.
|
# ? May 18, 2020 04:10 |
|
Also make sure to get at least a 2000W heatgun. Was using an old 1200W one at first and it got so much easier with the extra watts
|
# ? May 18, 2020 11:02 |
|
HG/DB here too, but I usually do smaller batches (~130g) but it's super easy. I'd definitely want to do it outside even if I had a powerful hood, the chaff that comes off is pretty crazy on some varieties.
|
# ? May 18, 2020 15:54 |
|
Is there a better place online to get green coffee then sweet Maria's? It costs 9$ to ship a pound which makes it close to roaster costs.
|
# ? May 19, 2020 12:31 |
|
Buy more than a pound? Green coffee keeps. Alternately check around in your area.
|
# ? May 19, 2020 13:22 |
|
My local roaster mayorga organics sells green coffee too. They always have a deal of you order over $50 you get free shipping.
|
# ? May 19, 2020 13:30 |
|
Munkaboo posted:Is there a better place online to get green coffee then sweet Maria's? It costs 9$ to ship a pound which makes it close to roaster costs. ebay* *better in this case meaning cheaper
|
# ? May 19, 2020 16:33 |
|
mediaphage posted:If you don't, you'll set off smoke detectors in the best case and smoke out your house (in a bad way) in the worst case...unless you have a practically commercial vent hood. It's pretty gnarly. Popcorn machines can work, but so will a metal bowl and a heat gun (the latter will let you do slightly larger batches). Isn't there also a serious fire safety issue with roasting indoors?
|
# ? May 19, 2020 18:32 |
|
You’ll blow lots and lots of chaff everywhere if you’re using a popcorn machine or heat gun/dog bowl. It’s theoretically possible that it could spark and ignite something but really it just makes a gigantic mess e: unless you are dumb and blast your beans until they are literally on fire Clark Nova fucked around with this message at 18:42 on May 19, 2020 |
# ? May 19, 2020 18:37 |
|
nivdes posted:Isn't there also a serious fire safety issue with roasting indoors? Eh, define serious. I'd argue it's less dangerous than a deep fryer, especially if you're doing one of the hack roasting methods. Even the purpose-built roasters are generally less likely to start fires than a toaster oven if you're paying attention.
|
# ? May 19, 2020 18:57 |
|
I've roasted in my normal oven on a sheet pan before. It's a mess but it never occurred to me that it was dangerous. Not any more than roasting a turkey.
|
# ? May 19, 2020 19:28 |
|
Mu Zeta posted:I've roasted in my normal oven on a sheet pan before. It's a mess but it never occurred to me that it was dangerous. Not any more than roasting a turkey. Agree. But then, you’ll have those who want to deep fry frozen turkeys on their counter.
|
# ? May 19, 2020 19:37 |
|
mediaphage posted:Eh, define serious. I'd argue it's less dangerous than a deep fryer, especially if you're doing one of the hack roasting methods. Even the purpose-built roasters are generally less likely to start fires than a toaster oven if you're paying attention. I know it's different with purpose-built roasters, seeing as most commercial roasters operate indoors, but I've always understood roasting coffee with air poppers and whatnot to be a huge fire hazard. Mu Zeta posted:I've roasted in my normal oven on a sheet pan before. It's a mess but it never occurred to me that it was dangerous. Not any more than roasting a turkey. It helps that ovens are also designed to contain fires provided you don't do anything stupid (i.e. open the door when a fire is raging in it)
|
# ? May 19, 2020 20:16 |
|
nivdes posted:
Well how else are you gonna throw a handful of flour onto the fire to put it out
|
# ? May 19, 2020 20:39 |
|
nivdes posted:I know it's different with purpose-built roasters, seeing as most commercial roasters operate indoors, but I've always understood roasting coffee with air poppers and whatnot to be a huge fire hazard. Like I said, the level of hazard depends on the user, in all seriousness. If you're remotely paying attention, it's not a fire hazard at all. If you're the type to walk away from a skillet full of grease while the stove's on, maybe don't roast coffee inside.
|
# ? May 19, 2020 20:56 |
|
Good call on ordering more than a pound. Got Ethiopia Organic Sidama Keramo and Ethiopia Dry Process Suke Quto Daannisa from Sweet Maria's. Also got a Furno 500 heat gun from home depot.
|
# ? May 19, 2020 21:12 |
|
Munkaboo posted:Good call on ordering more than a pound. Got Ethiopia Organic Sidama Keramo and Ethiopia Dry Process Suke Quto Daannisa from Sweet Maria's. I've ordered sidamas before (from a different source) and really enjoyed it.
|
# ? May 19, 2020 21:31 |
|
Nephzinho posted:Does a fine job once you figure out how to cycle the machine just right. I really should've installed a PID.
|
# ? May 20, 2020 17:50 |
|
Abner Assington posted:Yeah, I've had my Silvia for a little over a month now and am wavering on either installing a PID, or upgrading even further to something completely buck wild like the Rocket Appartamento. I'm getting consistently good shots, but the steam wand is still an inconsistent, sputtering nightmare. I just installed a PID on my Gaggia Classic, and I'm pretty happy with the results. I'll have to find time for an effort post on it later, but it seems much more consistent in the taste.
|
# ? May 20, 2020 18:35 |
|
I mean, there's definitely user error still on my part, so there's that. I think the totally rudimentary design of the Silvia is both awesome (because simple, well-built things are cool) and infuriating (because the only thing on the machine to tell me it's at a certain temperature is a goddamn orange light and it isn't entirely accurate, suffice to say).
|
# ? May 20, 2020 19:59 |
|
Abner Assington posted:I mean, there's definitely user error still on my part, so there's that. I think the totally rudimentary design of the Silvia is both awesome (because simple, well-built things are cool) and infuriating (because the only thing on the machine to tell me it's at a certain temperature is a goddamn orange light and it isn't entirely accurate, suffice to say). This is why I bought one and installed it. I've had my Gaggia for years now, I got it as a gift. I was alright at making espresso with it, but it wasn't until recently I had time to really learn how to try to pull good shots. I did a lot of research and noticed how what I was doing was affected more than I thought by the temperature. The PID seems to have solved that, and it also adds a couple things that I probably would never really bother with like automatic shot timing/pre infusion (although I plan to take another morning to eventually figure these out). The install took me a few hours as I am not the most mechanically savvy person but it taught me exactly what you said - these machines are very simple. I also used the opportunity to turn down the OPV to get me closer to 9 bars instead of the Classic's standard setting of something like 11 or 12. In my cost/benefit analysis, it made sense to me to keep with what I have and pay the 200 bucks for this (and another ~50 for other things like a bottomless portafilter and new gaskets and such). If I wanted to get better experiences with a stand alone machine, I'd have to come out of pocket nearly 10 times that much. I like espresso, but not that much. Separate question for the group - now that I have a bottomless portafilter basket, I get to see how my tamping method is pretty terrible. The puck gets channeled and I spurt out espresso in every direction, so I've been reading up on portafilter distributors, these gadgets that basically try to evenly spread the espresso in the basket. I've even watched a couple videos where some people are saying they are ditching tamping altogether and will just stick with the distributor. What has been the hive mind's experience with these? Some of them are pretty expensive...
|
# ? May 21, 2020 15:39 |
|
Just buy a cheap one from ebay/aliexpress/amazon. I bought one and was surprised at the difference it made. I used to stir with a cocktail stick to break up clumps then bang the portafilter to distribute but now I just grind into the portafilter and spin the thing. It pretty much completely stopped any channeling I used to get. I still like to tamp to get a flat top to the puck although I don't know if it makes much difference.
|
# ? May 21, 2020 15:44 |
|
There have been studies that show that distributors actually serve to lower extraction, not increase it. So take any pro-distributor testimonials with a grain of salt.
|
# ? May 21, 2020 16:38 |
|
Homie S posted:This is why I bought one and installed it. I've had my Gaggia for years now, I got it as a gift. I was alright at making espresso with it, but it wasn't until recently I had time to really learn how to try to pull good shots. I did a lot of research and noticed how what I was doing was affected more than I thought by the temperature. The PID seems to have solved that, and it also adds a couple things that I probably would never really bother with like automatic shot timing/pre infusion (although I plan to take another morning to eventually figure these out). I should look into a PID but, like you, I'm also not entirely savvy with that kind of work. I do have a budget for something like an Appartamento (what money I'd saved for travel, which isn't exactly happening any time soon), and am down with a machine that can pull a shot and steam simultaneously, but I don't know if I want to spend the money like that (an ongoing battle in my head for the last few weeks).
|
# ? May 21, 2020 17:32 |
|
Abner Assington posted:I ended up getting a bottomless filter within a week of getting the Silvia just so I could diagnose what I was doing wrong with my shot pulling. Agreed, it's a personal decision, and the other thing that went into my choice was that I'm not a big latte drinker and I usually just drink double shot espresso. If I was more into doing other styles of drinks I'd probably give it closer attention. I've got a steam wand, although it's considered the worst one in the industry... Gunder posted:There have been studies that show that distributors actually serve to lower extraction, not increase it. So take any pro-distributor testimonials with a grain of salt. Good to know, thanks. Perhaps the distribution + tamper method may be best?
|
# ? May 21, 2020 17:37 |
|
|
# ? Jun 8, 2024 07:39 |
|
Abner Assington posted:I should look into a PID but, like you, I'm also not entirely savvy with that kind of work. I do have a budget for something like an Appartamento (what money I'd saved for travel, which isn't exactly happening any time soon), and am down with a machine that can pull a shot and steam simultaneously, but I don't know if I want to spend the money like that (an ongoing battle in my head for the last few weeks). Homie S posted:Good to know, thanks. Perhaps the distribution + tamper method may be best?
|
# ? May 21, 2020 18:16 |