|
McSpergin posted:Nice! What's the material on the handles? All the chef knives are various stabilized (some dyed) woods. The steak knife is acrylic. I'll post the full stats (including specifics about the handle materials and where I got them) when I post the full finished knives.
|
# ? Dec 18, 2019 23:44 |
|
|
# ? May 9, 2024 09:25 |
|
From the top: a kit blade I made grip scales for from from black walnut from my great-grandpa's sawmill. Bottom: one of these cheap machetes I cut down to a cruiser bow. Middle two: a knife and a WIP blade made from the bit I cut off the machete. I showed them to my father, who made a few knives from kits himself back in the day, and has always been a proponent of "always have a good knife on you, in case you have to carve out a civilization." He was very appreciative of them, and said "Now make me an ulu." I think he mostly meant it as a joke challenge, but he's getting the middle one here as a Christmas present: Found an ancient (well, older than me, at least, probably late '70s) seized-up 7.5" B&D circular saw in his shed, took the blade off and gave it an overnight bath in Evaporust (not sponsored, just a satisfied customer of sufficiently advanced technology), then cut the teeth off and cut the finger slots out of the center. All have at least four coats of Danish oil, the handles I made for the the blades made from trash are made from whatever cutoffs happened to be the proper size and nearest the top of the scrap box (they live out in the boonies, so instead of a "gently caress it bucket" Mom has a largish cardboard box for wood scraps and a bin for trash that can't be burned at home, idea being you can just take the box of wood scraps and throw it on the burnin' pile when you get enough yard waste to justify a bonfire.*) I think the filet knife and the ulu are from the same bit of standard pine 1x ripped down for some project of mom's, she putters around in the shop when she's off work, Dad is old and feeble and retired for some time, so has put his puttering skills into gardening and Asian cuisine, hence asking me to make him a kitchen knife. (*And yes, she does call the local authorities and warn them before lighting it.) Edit: Should've included something for scale, but the ulu is about 5" or a bit less between points.These are not large knives. (Well, I guess one of the ones mentioned that spawned two of the others is, but you know.) Chillbro Baggins fucked around with this message at 03:01 on Dec 24, 2019 |
# ? Dec 24, 2019 02:12 |
|
I finished the knives and gave them to my family for Christmas. They were totally floored. I was up until 3am the night before Christmas Eve finishing them, but got 'em done. Hand-forged from 80crv2 and tempered at 375F (twice for 2 hours each time). Left to right: 8 1/4" blade, stabilized redwood lace burl, 126g 8" blade, stabilized pink & blue dyed maple burl, 135g 7.5" blade, stabilized purple dyed maple fiddleback, 137g 7" blade, stabilized redwood lace burl, 93g 7" blade, stabilized green dyed curly mango, 107g
|
# ? Dec 27, 2019 07:59 |
|
Some good rear end knives in here
|
# ? Dec 31, 2019 00:02 |
|
So I'm about to take a foray into making my first knives. A fellow Aus goon works at a blacksmith near Canberra, and has kindly sorted me out with 4x 1075 offcuts. All around 300mm long, in varying thicknesses and widths. It should be enough to make a couple steak knives and a few kitchen knives. Thanks to my woodworking and axe restoration project, I have a ton of timber offcuts I can use to make handles. I'll keep you posted!
|
# ? Jan 7, 2020 00:02 |
|
McSpergin posted:So I'm about to take a foray into making my first knives. A fellow Aus goon works at a blacksmith near Canberra, and has kindly sorted me out with 4x 1075 offcuts. All around 300mm long, in varying thicknesses and widths. It should be enough to make a couple steak knives and a few kitchen knives. Thanks to my woodworking and axe restoration project, I have a ton of timber offcuts I can use to make handles. Awesome! I have found it to be a very addictive hobby that I'm constantly trying to learn more about. This upcoming weekend I'll be taking a 3-day class making a raindrop-pattern damascus chef knife, and will also have enough of a billet left over afterwards to make a second one at my home shop! I'm really excited for all the things I'l be working on this year in knifemaking. A friend into jewelry-making is interesting in making mosaic pins to collaborate with me on knives, too!
|
# ? Jan 7, 2020 00:24 |
|
Kenshin posted:A friend into jewelry-making is interesting in making mosaic pins to collaborate with me on knives, too! Good friend imo
|
# ? Jan 7, 2020 02:28 |
|
I just had day 1 of my damascus chef knife class at Fire Horse Forge. We created our raindrop damascus billets today, each enough for two knives, though we'll only be forging one in the class. Tomorrow we'll forge out the knives and get them heat treated, Sunday we'll finish them.
|
# ? Jan 11, 2020 09:32 |
|
That sounds like a great course!
|
# ? Jan 11, 2020 14:08 |
|
Finished knife after a coffee etch (in addition to the initial acid etch) 52 layers of 1080 & 15n20 steel with a raindrop pattern natural Ho wood (magnolia) & buffalo horn ferrule Wa-style handle (I didn't make the handle) I did make the damascus billet (with a hydraulic press) and hand-forge and finish the knife 83g total weight Done at class at Fire Horse Forge, Ballard, Seattle run by owner David Tuthill. Kenshin fucked around with this message at 04:03 on Jan 14, 2020 |
# ? Jan 14, 2020 02:43 |
|
Kenshin posted:Finished knife after a coffee etch (in addition to the initial acid etch) This absolutely owns and I'm excited for the day I get around to doing something similar
|
# ? Jan 14, 2020 05:32 |
|
I made another chef knife using the other half of that damascus billet, and I'm quite happy with it. This one I did the handle on--this is the second hidden tang handle I've made. The first one was last week when I finished a filet knife for myself (maybe I'll show off pictures of it later, it's fine but I was mainly using it as a practice piece). Second damascus knife. 1080/15n20, 52 layer raindrop pattern damascus blade, brass bolster + g10 spacer + stabilized multi-dyed black ash burl handle 6.5"/16.5cm blade, 4.7oz/134g total weight Kenshin fucked around with this message at 04:46 on May 18, 2020 |
# ? May 7, 2020 06:02 |
|
^ Holy moly! Everything about that is just Or actually
|
# ? May 7, 2020 19:37 |
|
Kenshin posted:I made another chef knife using the other half of that damascus billet, and I'm quite happy with it. I think I follow you on insta because that maker's mark looks familiar
|
# ? May 8, 2020 02:18 |
|
McSpergin posted:I think I follow you on insta because that maker's mark looks familiar It's possible. @wing.on.wing
|
# ? May 8, 2020 02:42 |
|
Made a few more knives recently this is the one im most proud of.
|
# ? Jun 16, 2020 18:22 |
|
r00tn00b posted:Made a few more knives recently this is the one im most proud of. Nice job! Where'd you get the billet from? Looks like Damasteel or XHP?
|
# ? Jun 16, 2020 18:48 |
|
Kenshin posted:Nice job! Where'd you get the billet from? Looks like Damasteel or XHP? I made it myself... edit - I also made the aluminium myself as well, well melted it down from cans and poured and shaped it. r00tn00b fucked around with this message at 20:19 on Jun 16, 2020 |
# ? Jun 16, 2020 20:12 |
|
r00tn00b posted:I made it myself... Whoa, drat, it looked so tight and consistent I thought it looked like one of the Damasteel patterns I'd seen! Nice job on the Damascus then! Which two steels? Kenshin fucked around with this message at 16:46 on Jun 17, 2020 |
# ? Jun 16, 2020 20:26 |
|
r00tn00b posted:I made it myself... It's freaking amazing!
|
# ? Jun 17, 2020 14:04 |
|
Kenshin posted:I made another chef knife using the other half of that damascus billet, and I'm quite happy with it. That is quite the pattern! What do you use for your grinding? I just took the ABS intro to bladesmithing course last month, so now I'm trying to upgrade my piddly blacksmith setup for knife work. I have a bunch of ugly rear end pictures of a bunch of ugly rear end knives to post, but not tonight
|
# ? Jul 16, 2020 07:36 |
|
BLARGHLE posted:That is quite the pattern!
|
# ? Jul 16, 2020 08:59 |
|
Kenshin posted:I have a 2x72 belt grinder made by Origin Blade Maker out of Oregon at the shop at my friend's house. Ah. That's the same one we used in class, and on the cheaper end of 2x72 grinders, so that's probably what I'll be getting
|
# ? Jul 17, 2020 00:03 |
|
Some stuff from the ABS class- Rope cut Didn't get any pictures of the actual 2x4 hacking, but we hacked a bunch of 2x4s They all survived the bend test Ugly roughed out handle on an ugly chef knife Less ugly, but still certainly not pretty. Desperately in need of some sanding, but sharp as gently caress We had one 19 year old kid in the class who was wildly talented and had been making his own stuff in the most primitive/free setting possible for a couple of years. His knives are immediately above my french chef approximation/abomination at the bottom of the picture, and the instructor's (Scott McGhee of Guinea Hog Forge) is the black handled one right above his work. I would have to go find his name, but I have a feeling we'll be seeing a lot more of him in the coming years. BLARGHLE fucked around with this message at 07:54 on Jul 18, 2020 |
# ? Jul 18, 2020 05:20 |
|
BLARGHLE posted:Let me know if you can see the pics or not, because I can never see them in my own posts when I use imgur. Sometimes they show up, sometimes they don't! The images aren't loading because you are linking to an imgur page rather than to the actual image. After uploading an image, you have to click on it and click share links and then click bbcode link and then copy that link. or, right click the image and copy the URL of the image. For example, you posted code:
code:
Note that in addition to using the timg tag, imgur provides several scaled image sizes you can use instead. You get them by adding a letter to the end of the file name, before the extension. I know at least s=small, m=medium, l=large, and h=huge work, not sure if there's more. code:
|
# ? Jul 18, 2020 06:50 |
|
Leperflesh posted:The images aren't loading because you are linking to an imgur page rather than to the actual image. After uploading an image, you have to click on it and click share links and then click bbcode link and then copy that link. or, right click the image and copy the URL of the image. Thank you very much! I will go back and edit my post to fix that In the past people have just been like "use imgur dipshit," which has been supremely unhelpful.
|
# ? Jul 18, 2020 07:07 |
|
Man, that is cool as hell! Thank you for sharing. The last picture, does that pinky-ring knife style have a name or specific purpose? Been thinking about getting a garden knife and that looks ideal, if I can find a way to carry it around without sticking myself.
|
# ? Jul 20, 2020 01:49 |
|
TheNothingNew posted:Man, that is cool as hell! Thank you for sharing. Looks sort of like a karambit. They are Filipino fighting knives but were originally farmer's knives, agricultural tools. You can hold it either with your index finger through the ring or your pinky--the normal grip is with the index finger through it. Holding it like that you can see how useful it is to cut plants (as well as what a deadly fighting knife it is)
|
# ? Jul 20, 2020 01:52 |
|
Kenshin posted:Looks sort of like a karambit. It does, doesn't it? Karambits only register as weapons in my head, so I wasn't making that connection. Thanks.
|
# ? Jul 20, 2020 04:38 |
|
TheNothingNew posted:It does, doesn't it? Karambits only register as weapons in my head, so I wasn't making that connection. Thanks. The tiny twisty one next to the dagger? I don't remember exactly what the kid called it, but he was trying to base it on some historical european/mediterranean design, rather than the karambit. It was for his girlfriend to use in the garden, if I recall correctly.
|
# ? Jul 20, 2020 23:01 |
|
BLARGHLE posted:The tiny twisty one next to the dagger? I don't remember exactly what the kid called it, but he was trying to base it on some historical european/mediterranean design, rather than the karambit. It was for his girlfriend to use in the garden, if I recall correctly. Yeah, that's the one. Ah! Knowing where it came from/what it's used for got me "boline". But possibly a historical style, not the crescent moon not-actually-usable-as-a-knife ritual blade. Thanks!
|
# ? Jul 21, 2020 00:21 |
|
TheNothingNew posted:Yeah, that's the one. I honestly have no idea. He showed me a picture of what he was working towards, and it looked more or less like what he ended up with. It had a tighter coil in the handle, but was otherwise basically what you see above.
|
# ? Jul 26, 2020 04:52 |
|
After a couple months of scrimping and saving I finally got the cash together for a belt grinder which means now I can finally get to knife making! I went with an 84 Engineering 2x48 on the recommendation of Zubraman on here, who works at Tharwa Valley Forge in the ACT here in Australia. The seller does them with a few options, primarily with motors and VFD's but I got mine without motor and VFD and with a heavy pedestal stand. I know enough electricians that I can give them a bottle of booze to do the hookup for me and I can order in whichever motor and VFD I want Linky
|
# ? Aug 2, 2020 02:53 |
|
I've been experimenting with some forging at work on my breaks. I have access to acetylene torches there which is pretty nice. This is made from a car suspension coil spring that my friend gave to me after he upgraded. It measures about 10 1/2" long. I feel like I want to take up to an inch off of the blade length for proportions but everyone I ask says it looks good this long. What do you guys think?
|
# ? Aug 2, 2020 07:49 |
|
I'd agree with everyone you've shown it to: looks good to me!
|
# ? Aug 2, 2020 16:14 |
|
McSpergin posted:After a couple months of scrimping and saving I finally got the cash together for a belt grinder which means now I can finally get to knife making! Looks nice, especially with the stand!
|
# ? Aug 14, 2020 04:57 |
|
Ziggy Smalls posted:I've been experimenting with some forging at work on my breaks. I have access to acetylene torches there which is pretty nice. The proportions look ok, or actually if anything I'd have made the blade a bit longer and wider. Currently the handle dominates visually. How's the balance?
|
# ? Aug 14, 2020 05:04 |
|
I'm working on putting together a new, larger forge. My old one was a plaster/sand paint can body with a bernzomatic ts8000, which was entirely adequate for mokume gane, mild steel work, even some welding; but can't quite accommodate blade sized stuff, at least not as I was taught to make them. Old forge with bricks. I'm not sure how many hours I ran it like this (over a year), but a longer than usual forging day forced me to rethink my setup! Old forge without bricks. Had to adjust the brick setup a bit after a tiny fire was caused by the downdraft from the tilted bricks at the opening... The first couple of mokume gane billets I made a few years ago. Not sure why I don't have pics of anything more recent? It's pretty easy to tell which one I stacked while wearing gloves, and which one I didn't. Not pretty welds by any means, but they were a start! I'm going to be making a Tim Lively-style washtub forge. Appliance and plumbing problems have gotten in the way for the last few weeks, but hopefully my little brother and I will be able to adobe it up next weekend. Aside from digging it out of the ground (I have a tiny townhouse back yard, and my brother lives with his in-laws), "natural" kitty litter was the most accessible source of clay I could find. Cheaper than oil dry, oddly enough! I also got a new anvil a few months back, although I haven't gotten around to finishing the stand yet. Aside from the ABS class, I haven't forged anything this year... The hardy hole is kind of a mess, so I'm not sure what we're going to do about that yet. Other than that, it's supposed to be a passable anvil- 30kg, cast steel, may or may not have a hardened face, 1/4-1/2 of the price of the NC Tool anvils, depending on various factors (although if the NC Tool stuff had been as cheap in May as I'm seeing now, I may have just spent the extra $175 on one of those). BLARGHLE fucked around with this message at 05:36 on Aug 14, 2020 |
# ? Aug 14, 2020 05:31 |
|
BLARGHLE posted:Looks nice, especially with the stand! I worked out I can save $800 on it by getting the grinder body and stand as a kit, then buying a motor and VFD separately. I know enough electricians to get it done for the cost of a couple beers I love the brand 84 Engineering too. it's a bloke from regional NSW here in Australia, he lost his buildings in the bushfires so has now rebuilt a better shed and done earthworks and such around his property to isolate said shed workshop from future bushfires. He's worth a follow on socials too, they're rebuilding bigger and better with CNC machines. Also Alec Steele grinders are his grinders rebadged and running US spec motor and VFD 😎. Because of the Steele orders and time taken getting back on their feet, there's a waitlist as they do production runs of batches, so I'm on the list at the local distributor and was told about 3-6 weeks. Hoping sooner rather than later!
|
# ? Aug 15, 2020 00:54 |
|
|
# ? May 9, 2024 09:25 |
|
I've finally gone ahead and rented my own workshop space, which I'll get on September 7th. I went ahead and ordered a grinder for the space (since I don't want to remove my current grinder from my best friends' house where our forge is) and since we already have the Origin Blade Maker 2hp grinder with the VFD, I went ahead and ordered Origin Blade Maker's new rotating grinder with the same full kit. I also just epoxied up a 9" chef knife to its bolster and handle today, I should be able to grind the handle to shape tomorrow at my friends' place and then finish hand sanding the handle this weekend. I'm gonna give it as a gift to the guy who runs the Mexican food truck a few blocks from my apartment because having delicious Mexican food whenever I need it during this whole pandemic poo poo has been a life saver. 80crv2 + aluminum bronze bolster, FR4 spacer, stabilized black ash burl handle (hidden tang). I'll post pictures in a few days when I'm done with it. Kenshin fucked around with this message at 01:06 on Aug 15, 2020 |
# ? Aug 15, 2020 01:03 |