|
alternatively, fixed no brake = no rim wear
|
# ? Nov 26, 2020 01:20 |
|
|
# ? Jun 8, 2024 09:28 |
|
just knee wear
|
# ? Nov 26, 2020 01:22 |
|
Pittsburgh Fentanyl Cloud posted:dang Just don’t pull the brake lever with the wheel out. I take wheels iff all the time and never put anything in the caliper
|
# ? Nov 26, 2020 05:08 |
|
It's only an issue with hydraulic brakes and even then you just separate the pads again
|
# ? Nov 26, 2020 05:14 |
|
vikingstrike posted:Just don’t pull the brake lever with the wheel out. I take wheels iff all the time and never put anything in the caliper I'm dumb as gently caress and pull the lever when I'm not thinking the cardboard-in-the-caliper trick has saved me a bunch of times.
|
# ? Nov 26, 2020 05:47 |
|
With hydro brakes there's a chance you push a piston past the seal. If you go to your bike shop they'll give you a little plastic spacer meant for your caliper. My new bike even came with one.
jamal fucked around with this message at 07:13 on Nov 26, 2020 |
# ? Nov 26, 2020 06:29 |
|
All that’s left is dialing in the fit tomorrow. I got to sit on it tonight
|
# ? Nov 26, 2020 08:32 |
|
numberoneposter posted:while riding a bike you can do whatever you want to do as long as you arnt getting in the way of other people Dude. That is 'The Flow'. When you find it, there's nothing better.
|
# ? Nov 26, 2020 10:22 |
|
Cold out today Pretty though
|
# ? Nov 26, 2020 14:06 |
|
Guinness posted:While rim brakes are perfectly fine, in the year 2020 there's no reason to not get disc brakes for most people. If your bike sees wet and grit at all there's no discussion, discs are better. They're better, but expensive. If you buy an entry level road bike, the disc version is most likely going to be heavier, have worse components and cost more.
|
# ? Nov 26, 2020 14:37 |
|
MrL_JaKiri posted:Cold out today Nice shots. What's the logo on your neck sock from? And do you ever do anything specific for your ears? Nice giant robot in that second one.
|
# ? Nov 26, 2020 15:01 |
|
moctopus posted:What's the logo on your neck sock from? A former rowing club of mine. And my ears managed pretty fine, or maybe they went numb really soon - who can say
|
# ? Nov 26, 2020 15:19 |
|
e.pilot posted:All that’s left is dialing in the fit tomorrow. This is the first non-hideous tt bike I've ever seen
|
# ? Nov 26, 2020 16:36 |
|
HAIL eSATA-n posted:This is the first non-hideous tt bike I've ever seen I don’t know if non-hideous is the right word, but thanks lol.
|
# ? Nov 26, 2020 17:19 |
|
It's ugly but in a very good way e; Ordered a new wheelset hed belgium+ alloy rims hope rs4 hubs - purple sapim laser spokes 28/32 should be just about 1700grams HAIL eSATA-n fucked around with this message at 20:02 on Nov 26, 2020 |
# ? Nov 26, 2020 19:51 |
|
I somehow managed to break a chain in 2 places simultaneously today. Apparently I'm skilled... More importantly though, what color replacement should I get? Bike is a 2020 giant defy advance 3 in blue with a 10spd tiagra setup.
|
# ? Nov 27, 2020 04:48 |
|
G O L D
|
# ? Nov 27, 2020 07:11 |
|
Went on a fun dig through groupset history off of some old single-sided 2-bolt pedals I had: Thufir id'ed these as PD-6500, a 1997 Ultegra groupset that had SPD-SL, SPD, and clipped pedals. 348g, which is a bit heavy for today's road pedals, but still competitive with 2 sided SPD pedals. There was an earlier Dura-Ace version of this pedal, PD-7410: http://velobase.com/ViewComponent.aspx?ID=70BBC26F-D397-4EB2-8D68-F8198DEAE8FB&Enum=109&AbsPos=304 I've never seen the bolt on treads, which make a lot of sense if you're mounting to a road style sole (attn action jackson). Both descended from the A525, the 1 sided counterpart to the venerable M525. http://velobase.com/ViewComponent.aspx?ID=5550372A-3DC4-4E83-8245-7FE242C9B8D8&Enum=109&AbsPos=283 which also came in cool SNES colors The 1 sided SPD pedal lives on in A600 and ES600, which I could see going on some weight weenie gravel bike build. A totally different pedal I stumbled into: http://velobase.com/ViewComponent.aspx?ID=AA0D7C3F-3241-4402-9DC2-9F07285B751B&Enum=109&AbsPos=305 Shimano had a Dyna-Drive standard, 1" 24tpi threads. Instead of a full length pedal spindle, they had a very short one, maybe hoping the bigger bearing would be enough support? Were very light and look to be 0 stack, but I understand how hard it must be to go against one of the few sacred standards in cycling. Also it looks goofy as hell e: weird art bike potential, as you could thread that onto your 1" fork threads.
|
# ? Nov 27, 2020 09:27 |
|
The cleat on the right looks like it could be a Star Wars bounty hunter
|
# ? Nov 27, 2020 09:32 |
|
alnilam posted:Yeah a fuckload of grit in the winter and spring for sure. Pittsburgh Fentanyl Cloud posted:I was worried about this too, once I figured out that I could fold a piece of cardboard and stick it in the caliper when I took the wheel off it wasn't such a big deal e.pilot posted:All that’s left is dialing in the fit tomorrow. evil_bunnY fucked around with this message at 15:15 on Nov 27, 2020 |
# ? Nov 27, 2020 15:12 |
|
If you’re riding in the wet and grit all the time make sure you wipe your rims and pads off every ride if you’re worried about rim life
|
# ? Nov 27, 2020 17:08 |
|
Levitate posted:If you’re riding in the wet and grit all the time make sure you wipe your rims and pads off every ride if you’re worried about rim life Point taken. It's hard to do when the ride is 2x5 days a week and bike storage on both ends is often in sub freezing temps though
|
# ? Nov 27, 2020 17:24 |
|
A quick spray down will leave a protective layer of ice on your rims
|
# ? Nov 27, 2020 19:40 |
|
Recommendations for good cold weather gloves? I need something with good dexterity for gravel riding down to 5C. I lost my old PI winter gloves.
|
# ? Nov 27, 2020 20:29 |
|
gamera009 posted:Recommendations for good cold weather gloves? I need something with good dexterity for gravel riding down to 5C. If you’re medium or small: https://www.amazon.com/Answer-Sleestak-Cold-Weather-Gloves/dp/B0873DXGSW I’ve gotten these for 30 before; 16 shipped is a good deal.
|
# ? Nov 27, 2020 20:38 |
|
kimbo305 posted:If you’re medium or small: Unfortunately, I have wide palms and fat fingers. Typically a large for me but I’ll dig up their sizing chart. Danke.
|
# ? Nov 27, 2020 21:17 |
|
What's worth spending money on for a kids bike? My 3 year old has completely mastered her Strider, and is just barely tall enough for a 16" bike so we can skip 14" like I was hoping to. I'm trying to figure out pros and cons of a Woom 3 vs a Priority Start vs something much cheaper. I'm fairly certain that I'm willing to pay more for hand brakes vs a coaster, and lighter weight within reason. It looks like wanting hand brakes instantly puts me into a $270+ bracket, at which point the extra $100 for the woom starts to feel sane. Woom Pros: * Weight, ~12lbs total * Nice chainguard * Kickstand really far back, less likely to cause crashes if she uses it wrong. Woom Cons: * Price, crazy expensive for a kids bike. Can amortize this across multiple kids, at least. * 16 spoke wheels? I'm a little concerned about durability, given that it's going to be abused Priority Start Pros: * Belt drive * Tougher wheels * $70 cheaper Priority Start Cons: * Good bit heavier (17lbs vs 12lbs).
|
# ? Nov 27, 2020 21:38 |
|
gamera009 posted:Unfortunately, I have wide palms and fat fingers. Typically a large for me but I’ll dig up their sizing chart. They must be selling elsewhere in all sizes. I’m able to ride those to mid 30s F with bar mitts, though I do prefer bar mitts below that temp.
|
# ? Nov 27, 2020 21:46 |
|
Twerk from Home posted:What's worth spending money on for a kids bike? My 3 year old has completely mastered her Strider, and is just barely tall enough for a 16" bike so we can skip 14" like I was hoping to. Go full retard like i did and buy a 16” full bmx for the kid to grow into. I got my 3.5yo one of these (sounds like you got a big little kid like me) and he was riding it on his own in three months. Lots of room to grow into a bmx since they’re designed to ride small. Not super cheap, i got a We The People Seed and spent more on it than I did my own bmx.
|
# ? Nov 27, 2020 22:58 |
|
I had a nice Thanksgiving ride. I made some adjustments on my '53 Galmozzi and went for a 20 mile cruise. Steel + wood rims + 75psi tubulars = comfy.
|
# ? Nov 27, 2020 23:28 |
|
Decided to give cold weather (5-10C) riding a try. Castelli Perfetto RoS gets recommended a lot as a top. What about the rest? Will bib shorts with separate leg pieces work or do I need long bib pants?
|
# ? Nov 27, 2020 23:34 |
|
Twerk from Home posted:Woom Pros: Hand brakes are very good provided they can squeeze them.
|
# ? Nov 27, 2020 23:41 |
|
gamera009 posted:Recommendations for good cold weather gloves? I need something with good dexterity for gravel riding down to 5C. 45NRTH Nokken have been great for me.
|
# ? Nov 27, 2020 23:42 |
|
rope kid posted:
This is a cool bike. How well do wood rims work and hold up to wear and tear? Also drat that is a tiny cassette and a not very small chainring. Climbing must not be a sit and spin affair on that thing. Gosh modern gearsets have made me soft.
|
# ? Nov 28, 2020 02:51 |
|
BraveUlysses posted:G O L D I like the cut of your jib. Gold chain it is!
|
# ? Nov 28, 2020 03:44 |
|
Dictator. posted:Decided to give cold weather (5-10C) riding a try. Castelli Perfetto RoS gets recommended a lot as a top. Roubaix bib tights (eg), a long sleeve thermal jersey and a wind shell would be enough for moderate temps like that. Add a base layer for below 5. gamera009 posted:Recommendations for good cold weather gloves? I need something with good dexterity for gravel riding down to 5C. Sealskinz are my go to for winter gloves. But if I lost them tomorrow, I'd probably go try one of those knit ones like theirs or the Showers Pass version.
|
# ? Nov 28, 2020 05:58 |
|
I'm really happy with my full bib tights (Pearl Izumi amfib). The only issue is having to do laundry to ride every day when it's cold but I probably don't really need two pairs of them. Also you wear enough poo poo on one ride in the winter so there's plenty to put in the washing machine. The other thing I'm really liking are the new winter shoes. Been out on rides in the 20s and the feet stay comfy. Only downside, I'm tall, and can feel the cold air on my ankles. My poc thermal gloves are nice but they're probably overpriced at retail. I was worried they were too tight at first but after wearing them a few times they fit perfectly now. Good dexterity, warm enough for low 30s. I expect I'll eventually wear a hole on the edge of my right index finger, that's where all my gloves fail and I wish mfgs would put a little reinforcement strip there where you're rubbing the edge of the brake/shift lever. Maybe I should do that myself with aquaseal or something. They don't quite cut it on really cold days but I feel like you just need bar ends at that point. Something like those big lobster gloves would be nice but am unsure on how that's going to work on the mtb where I want my middle finger around the bars. The pearl izumi pro insulated jacket is light and warm, but missing a few features that would make it better. it's a little boxy and shapeless for a "pro" level piece, and also doesn't have wrist closures so they just kind of hang open and funnel cold air up your sleeves. The front pockets are also useless for riding and have tiny zipper pulls that you can't really open with gloves. There is a rear pocket that holds a phone pretty well at least. I wish I'd noticed that poc thermal jacket or the giro one. I get a pretty solid deal on both and they both seem to be cut a little better for riding a bike and the giro has neat wrist sleeve things and better pockets. jamal fucked around with this message at 07:13 on Nov 28, 2020 |
# ? Nov 28, 2020 06:48 |
|
Guinness posted:This is a cool bike. How well do wood rims work and hold up to wear and tear? Yeah I went for something that wasn't too gnarly, gearing-wise. I originally struggled trying to get some wide range nonsense going and it just wouldn't work with the derailleurs/clearance of the frame. It's 50/38 in front and 13-24 in back, IIRC. I haven't done any wild climbing on it yet, but it seems fine.
|
# ? Nov 28, 2020 09:00 |
|
Dictator. posted:Decided to give cold weather (5-10C) riding a try. Castelli Perfetto RoS gets recommended a lot as a top. Rather than bib tights, I have a couple of pairs of unpadded over tights. I wear them over the top of my regular bib shorts which means I get a few wears out of them before they need a wash (because you just wash the bib shorts as usual). Handy if you winter ride but don’t want to buy multiple pairs of winter bibs - the unpadded tights tend to be a fair bit cheaper too. Make sure you have something for your hands and feet.
|
# ? Nov 28, 2020 10:04 |
|
|
# ? Jun 8, 2024 09:28 |
|
Pantsmaster Bill posted:Rather than bib tights, I have a couple of pairs of unpadded over tights. I wear them over the top of my regular bib shorts which means I get a few wears out of them before they need a wash (because you just wash the bib shorts as usual). Handy if you winter ride but don’t want to buy multiple pairs of winter bibs - the unpadded tights tend to be a fair bit cheaper too. This Also I use thinner tights meant for running under my bib shorts when the temps are in the low teens, the bib shorts keep them up, and a toilet stop isn’t too fraught.
|
# ? Nov 28, 2020 10:35 |