|
Sorry for so many weird questions. I like even tried to Google this one. When cornering on a multi lane highway or twisty road, is it OK to change lanes? Depending on the direction of lane change it would make your corner sharper or more shallow. It's not something I think about in a car, I do switch lanes mostly whenever as long as it's not an intersection. A motorcycle I am thinking twice because it will use more traction reserve of the tire. Thus far I have only been planning lane switching on straight aways.
|
# ? Jun 5, 2021 16:07 |
|
|
# ? Jun 3, 2024 23:48 |
|
Change lanes in the same places/scenarios you would in a car. Don’t overthink it.
|
# ? Jun 5, 2021 16:13 |
|
Some bullet points on the topic: - in a vacuum it is better to pick a line through a turn and hold it than to weave while you're leaned over - however, on the street it is perfectly fine (correct) to change your line in a turn if you need to avoid sand or a pothole or whatever - if you are riding so hard on the street that tightening your line to change lanes would be dangerous, you are riding too hard - if you're posting in this thread you are probably using like 20% of your tire's traction reserve at most anyway, so you have nothing to worry about - if you're asking about changing lanes on broad sweeping turns, you can consider those basically the same as straight roads - if you're asking about changing lanes on tight narrow turns, i would be more concerned about sight lines than traction - one thing to always keep in the back of your head is how slippery the lane markings can be as you cross them, especially when it's raining; this is a bigger concern than the steepness of your turn. but really you should just ignore all of that stuff and moxieman posted:Don’t overthink it.
|
# ? Jun 5, 2021 16:27 |
|
Had a very pleasant two hours out today along the Ontario lakeshore. After talking through clutch in turns in here I really felt I got the right mix of traction and control such that I wasn’t coasting but also the throttle in second was very relaxed, not that I’m trying to jerk the throttle in a turn. My biggest mistake of the morning was being behind an old man who was crawling and I assumed him pulling over to the side meant he was ready to park or let me pass so moved over and began to accelerate along side him only to see his tires turn and front come out as he begins to make a wide u-turn. I gunned it through but that could have been ugly because I didn’t think for a moment he’d just swing across. Anyway, lesson learned. Also two things: I’m not gripping the tank nearly enough which I just need to work into muscle memory and, I’m making much more concerted effort to look through turns like I’m supposed to and it’s making a ton of difference. The one or two times I looked too close to the bike I was turning very hesitantly and it’s a night and day difference. some kinda jackal fucked around with this message at 17:14 on Jun 5, 2021 |
# ? Jun 5, 2021 17:11 |
|
Martytoof posted:My biggest mistake of the morning was being behind an old man who was crawling and I assumed him pulling over to the side meant he was ready to park or let me pass so moved over and began to accelerate along side him only to see his tires turn and front come out as he begins to make a wide u-turn. I gunned it through but that could have been ugly because I didn’t think for a moment he’d just swing across. Anyway, lesson learned.
|
# ? Jun 5, 2021 17:35 |
|
Perfect, thank you. I am going the speed of traffic. I think I am going to work on it a little when the roads are dead. Martytoof posted:Had a very pleasant two hours out today along the Ontario lakeshore. Speaking from the Rochester side of the Ontario lakeshore, it is great, isn't it? Also, like, so I am 35. I hang out with my friend's son sometimes who moved back to my hometown after he got into some trouble where his mom moved to. He's 19. So his uncle saw my bike, now wants a Harley, is probably going to get one. I am encouraging them both to take the MSF class if they are gonna do it. It would be cool if we could all ride. They are sorta in the country which is nice. If he gets his permit at least I'd get a Chinese Grom knockoff he could ride and he could putt around with us. For whatever reason he's not interested in getting a car or a normal drivers license but he's interested in bikes. I kinda wanna encourage it because it's fun and I guess it's a step towards self reliance. He's been riding around this little Chinese mini bike which can do 30-40 but it is totally not street legal. Might as well just do the real thing ya know? At the same time it's sus enough being a new driver in a car on roads. Tons of new drivers get into accidents. A motorcycle absolutely deserves even more respect than a car. gently caress up and you die. I dunno anyone who got a motorcycle license before a car license. SSH IT ZOMBIE fucked around with this message at 17:57 on Jun 5, 2021 |
# ? Jun 5, 2021 17:36 |
|
I'm glad I had lots of car driving experience before I got on a motorcycle. With all the mechanics going into operating a bike as a new rider taking up so much of your resources, I can imagine having to also get used to traffic on top of that would make the learning curve much steeper. Driving long enough, you find you pick up a sixth sense about the stupid things people are going to do on the road before they do them, and it was happening unconsciously by the time I started riding in traffic.
|
# ? Jun 5, 2021 18:44 |
|
I mean I just want to qualify that I 100% would have started to pass this dude in my car as well so I can’t even blame this on bike sense
|
# ? Jun 5, 2021 20:49 |
|
MSF range day one down. I ended up on a dual sport that feels just a little too tall for me though not as bad as it would have been for the lady who would have ended up on it if I hadn't swapped with her (instructor likely would have kicked one of us off a shorter bike for her anyway). Reading this forum, Proficient Motorcycling, and a couple of other books definitely helped, the lecture night was 100% review for me. My biggest challenge today was consistently finding the foot pegs and leaning adequately around turns. I was hoping to get one of the Dukes but they got snapped up before I could get over there.
|
# ? Jun 5, 2021 22:30 |
Midjack posted:MSF range day one down. I ended up on a dual sport that feels just a little too tall for me though not as bad as it would have been for the lady who would have ended up on it if I hadn't swapped with her (instructor likely would have kicked one of us off a shorter bike for her anyway). Reading this forum, Proficient Motorcycling, and a couple of other books definitely helped, the lecture night was 100% review for me. My biggest challenge today was consistently finding the foot pegs and leaning adequately around turns. I was hoping to get one of the Dukes but they got snapped up before I could get over there. You got the absolute best bike there.
|
|
# ? Jun 5, 2021 23:21 |
|
I had my first "long" rice today (around 30 miles roundtrip) and everything went as perfect as it could, but it was also my first time riding at 50+ for any extended amount of time. Wear earplugs.
|
# ? Jun 6, 2021 00:50 |
|
I've put a bit over 500 miles on the bike in that past two weeks and have had such a blast. I've been loving every second of it. I wouldn't say I'm completely confident on the bike (or at least not overly so), but riding in traffic on multi-lane highways isn't as scary as I thought it would be. I've found I need to get some waterproof gear though. I haven't been riding it to work as much as I want to this week cause there has been misty rain showers for the past few days and I hate getting rained on. Also I think my favorite thing may be when I stop at the store or something and little kids want to come look at my bike. I let one kid rev it up and the smile he got on his face warmed my cold dead heart.
|
# ? Jun 6, 2021 02:19 |
|
Has anyone taken the advance riding course before? Did you like it? Was it worthwhile?
Russian Bear fucked around with this message at 02:54 on Jun 7, 2021 |
# ? Jun 6, 2021 07:13 |
|
MSF Day 2: I passed. At the beginning I fumbled with finding the footpegs again today. I think part of my problem yesterday is I was crushing my balls on the seat so I was standing on my toes a bit when we were still and got worn out; today I didn't have that problem. I suspect I went into yesterday a little dehydrated - I was pounding water the whole time but was still wiped out at the end and was in bed at 10pm last night - a super early night for me. I'm nowhere near as wiped out today. The bike I was on was a Vitacci 250 Raven. Seemed OK but seriously what do I know about anything at this point. I managed to scuff my helmet coming under the tent a couple of times but whatever, it's going to get gravel and dead bugs all over it as soon as I start riding anyway. Things I need to get better at: everything. For anyone else taking the class : bring a camelbak if you have one. No matter when you take it, you will dehydrate like crazy. Crack your visor open a bit when riding - it's cicada season here so wide open was a bad idea but a couple of centimeters open makes it easier to hear the instructors and gives you some breeze. If your helmet and jacket have vents, open them up in the summertime. I tend to death grip everything and motorbikes are no exception; my left thumb has a blister from grabbing the bar to work the clutch. Figure out how to sit on your bike such that you aren't hurting anything. I probably need to replace my fridge before I can buy a bike plus the used market is still shithoused so I will continue to hang around here until then. Thanks everyone for your helpful posts in this thread and other places.
|
# ? Jun 7, 2021 00:02 |
|
Congrats! You’ll get better with time, also everyone could always get better at everything and anyone that thinks differently is probably not very good!
|
# ? Jun 7, 2021 00:53 |
|
Midjack posted:you will dehydrate like crazy. In my admittedly limited experience, this is just what riding's like. I get through about a liter an hour to stay hydrated in the aussie summer just riding on the highway. More if I'm actually, you know, doing anything.
|
# ? Jun 7, 2021 03:08 |
|
After numerous interruptions on the road to buying a bike of my own, mostly house expenses, I was initially thinking on a KLR 650 or DR650, but given that I'll likely never do off road riding, I was looking at an mt03, though I've yet to test ride it. Are they decent bikes so far or best avoided?
|
# ? Jun 8, 2021 19:43 |
|
The MT-03 is a great bike and I'm not biased at all because I own one.
|
# ? Jun 8, 2021 19:59 |
The KLR is terrible and nobody should ever buy one, all the owners will tell you the same thing. The other two are perfect.
|
|
# ? Jun 8, 2021 20:41 |
|
Pine Cone Jones posted:After numerous interruptions on the road to buying a bike of my own, mostly house expenses, I was initially thinking on a KLR 650 or DR650, but given that I'll likely never do off road riding, I was looking at an mt03, though I've yet to test ride it. Are they decent bikes so far or best avoided? dr650. No klrs. had a klr, hated it. killed it, did the world a service.
|
# ? Jun 8, 2021 20:43 |
|
Elector_Nerdlingen posted:In my admittedly limited experience, this is just what riding's like. I get through about a liter an hour to stay hydrated in the aussie summer just riding on the highway. More if I'm actually, you know, doing anything.
|
# ? Jun 8, 2021 21:02 |
|
Someday in the future I want an MT-09 if I don't get a sport bike. All of the MT bikes look awesome and are probably pretty comfortable. I was in a similar boat and it had me looking at the Honda CB500X and Kawasaki Versys X 300. I love my bike, but I am half regretting my choice now to not look at used DR650s after looking at some google image search stuff where people make it look a bit more adventure-ey and less dirtbike-ey. Coulda thrown some more street-ish tires on, maybe an EFI kit later if the carb ever acted up or I wanted to like touch the exhaust or something.
|
# ? Jun 8, 2021 21:48 |
|
Pine Cone Jones posted:After numerous interruptions on the road to buying a bike of my own, mostly house expenses, I was initially thinking on a KLR 650 or DR650, but given that I'll likely never do off road riding, I was looking at an mt03, though I've yet to test ride it. Are they decent bikes so far or best avoided? Ride one for sure, it's got a very low seat height which is great or not so great depending on your biomechanics/body. I love mine!!
|
# ? Jun 8, 2021 22:20 |
|
Spiggy posted:The MT-03 is a great bike and I'm not biased at all because I own one.
|
# ? Jun 9, 2021 01:28 |
|
Thanks for the advice, I'll contact the local Yamaha shop about setting up a test ride soon hopefully, if they've got an mt03 in anyway.
|
# ? Jun 9, 2021 10:36 |
|
as much as i love the full digital red backlight dashboard on my n650 the fuel gauge is hilarious in that it warns you FUEL! FUEL! FUEL! when you have 4ish liters left. Like cool your jets we can still go like almost another 100 km. been just using the trip computer to get a better idea of range.
|
# ? Jun 9, 2021 18:35 |
|
numberoneposter posted:as much as i love the full digital red backlight dashboard on my n650 the fuel gauge is hilarious in that it warns you FUEL! FUEL! FUEL! when you have 4ish liters left. Like cool your jets we can still go like almost another 100 km. been just using the trip computer to get a better idea of range. It's just excited. FUEL!
|
# ? Jun 9, 2021 23:09 |
|
My cat starts yelling at me two hours before dinner too
|
# ? Jun 9, 2021 23:25 |
|
SSH IT ZOMBIE posted:maybe an EFI kit later if the carb ever acted up or I wanted to like touch the exhaust or something. Yeah don't count on that. Successful conversions have been done by a small handful of insane people. There is no such thing as a kit, and it does anything but make your life simpler if the accounts on DRRiders and ThumperTalk are any indication. Carbs don't really act up unless they're neglected or hosed with, and a CV carb on a popular bike is a pretty simple thing to deal with. Servicing carbs is not some arcane dark art that only greybeards and Slavvy hold the knowledge to, despite how many people want to make it seem like that. It's fiddly and moderately intricate, but if you can build a Lego kit following the included instructions and floss your teeth or tie your shoes by yourself, you can service a thumper carb.
|
# ? Jun 10, 2021 20:36 |
|
HenryJLittlefinger posted:if you can build a Lego kit following the included instructions and floss your teeth or tie your shoes by yourself, you can service a thumper carb. I think this is a higher bar than you realize, but if someone can't service a carb they probably can't do an EFI conversion. But yeah, the easiest way to convert a bike to EFI is to sell it and buy one that comes with fuel injection. Phy posted:My cat starts yelling at me two hours before dinner too
|
# ? Jun 10, 2021 20:40 |
Carb to EFI is the bike version of the automotive fantasy of putting a turbo on a non-turbo car; it is always easier to just get a turbo car, and it's only cheaper if you already have a bunch of turbo hardware and knowledge accrued. And to drop the analogy, putting EFI on a carb bike gains you little to nothing. If you want convenience and reliability, you won't find it in DIY EFI conversion, I should know I've loving got one and it still doesn't run. A single carb is the most reliable and robust fueling system on this gay earth in the grand scheme of things, EFI just deteriorates slowly and is tamper resistant so most people never see the drawbacks.
|
|
# ? Jun 10, 2021 21:03 |
|
When a 2000-era fuel injected bike is 50 years old like early UJM’s are today you can bet there will be posting and gnashing of teeth about fueling problems on future forums. Fuel injection can power through some of the issues that carbs have but there are limits. When you pull an ancient R6 out of a cyberbarn in 2050, it’s gonna need fuel work just like a carb would. Beve Stuscemi fucked around with this message at 00:44 on Jun 11, 2021 |
# ? Jun 11, 2021 00:39 |
Jim Silly-Balls posted:When a 2000-era fuel injected bike is 50 years old like early UJM’s are today you can bet there will be posting and gnashing of teeth about fueling problems on future forums. Yeah this, and that work is drastically more painful, involved and complicated. That's not even mentioning the computer touching elements of ecu's etc. I've dealt with a few 00's era EFI bikes that heavy mileage + heavy abuse and it's a loving nightmare, I'd rather have carbs in that situation.
|
|
# ? Jun 11, 2021 00:51 |
|
https://www.youtube.com/watch?v=VYUHmpBY3jI
|
# ? Jun 11, 2021 01:13 |
Carb to EFI conversion: six months. Getting the throttle response just right: the next six years.
|
|
# ? Jun 11, 2021 01:17 |
|
I know it doesn't really gain anything over the carb but it's one step closer to my dream of a remastered Hawk GT Sagebrush fucked around with this message at 01:21 on Jun 11, 2021 |
# ? Jun 11, 2021 01:18 |
|
Slavvy posted:Carb to EFI conversion: six months. It's some German guy and he's been working on it forever. But yeah that last few inches is going to take a loooong time.
|
# ? Jun 11, 2021 01:20 |
I'M NEVER TOUCHING ANOTHER PILOT SCREW AGAIN *spends years converting to EFI, plays with the mapping for the rest of his life chasing the sweet sweet carb response* E: I'll bet Erik Buell converted a bike to EFI when he was younger and talked his mates' ears off about how much better it was while they all rode off to have fun on their working bikes E2: while I'm on the topic, there's also Harley's amazing back to front bikes circa 99-01 wherein they have a carb and cdi yet also have a cam position sensor, map sensor, tip-over switch and check engine light. They developed the bike for efi but when it came to actually riding the thing they found the throttle response and other aspects completely unacceptable, so they just bodged the cdi and carb from the earlier model on there until the bugs were worked out. Only Honda, Harley and Yamaha operate this way afaict. Slavvy fucked around with this message at 01:27 on Jun 11, 2021 |
|
# ? Jun 11, 2021 01:21 |
|
It would be easier to cram the EFI SV650 motor in there.
|
# ? Jun 11, 2021 01:26 |
|
|
# ? Jun 3, 2024 23:48 |
|
Why is it so hard to get EFI throttle response right? It seems like it should be easier as you have an easily programmed computer vs dealing with the laws of physics, but obviously that's not the case
|
# ? Jun 11, 2021 02:18 |