|
KKKLIP ART posted:I ended up doing the Dewalt DWE7491RS. 10 inch, accepts a dado with the correct throat plate, and the stand is pretty heavy duty and collapses and has big rubber wheels. I do t have a shop, only a small shed, so being able to get it in and out was a must. This saw is fantastic for a jobsite saw. My only gripe is the miter slots are that weird angled dovetail kind and some styles of adjustable width miter runners do not play well, but full height runners work fine. I just picked up a sheet of HDPE and cut to size. I 3d printed a hose adapter for my shop vac and it negates like 95%+ of the dust without the blade guard, probably would get almost everything if I threw that on and figured out a y splitter.
|
# ? Jul 8, 2021 20:07 |
|
|
# ? Jun 10, 2024 12:44 |
|
FogHelmut posted:How quickly does that run out of air? We shall see! It’s been too rainy/humid to even bother with a cardboard test/calibration run, so once there is some sunshine I’ll give it a shot and report back. Worst case I get my mom to bring up the 60-gal compressor from my late dad’s workshop on her next trip, that should handle anything I throw at it. I even already put in a new gfci circuit/outlet in the best spot to stow it in the third bay. He wanted me to have any tools of his from his massive workshop that I would find useful, literally a dying wish. He sold his huge, awesome sable saw and was about to order a SawStop when he got diagnosed with aggressive cancer. He taught me so much about using tools safely and being a handy person that the best thing I can do it pass that spirit on to my kids. devmd01 fucked around with this message at 20:52 on Jul 8, 2021 |
# ? Jul 8, 2021 20:47 |
|
devmd01 posted:We shall see! It’s been too rainy/humid to even bother with a cardboard test/calibration run, so once there is some sunshine I’ll give it a shot and report back. Worst case I get my mom to bring up the 60-gal compressor from my late dad’s workshop on her next trip, that should handle anything I throw at it. I even already put in a new gfci circuit/outlet in the best spot to stow it in the third bay. You probably ought to just call mom then. If an HVLP sprayer is high volume as the name indicates, a pancake compressor is not going to cut it. They're fine for using an airbrush.
|
# ? Jul 8, 2021 20:53 |
|
Any recommendations for an inexpensive miter saw for someone who just needs to cut up 2x4s, trim, quarter round and the like now and again? Was thinking 10" sliding? edit: i'm looking at this guy https://www.amazon.com/dp/B07Y6TTYCR/ref=emc_b_5_t Deviant fucked around with this message at 22:57 on Jul 9, 2021 |
# ? Jul 9, 2021 22:50 |
|
Deviant posted:Any recommendations for an inexpensive miter saw for someone who just needs to cut up 2x4s, trim, quarter round and the like now and again? Was thinking 10" sliding? This often goes on sale for much less https://www.homedepot.com/p/RYOBI-15-Amp-10-in-Sliding-Compound-Miter-Saw-with-LED-TSS103/306939218
|
# ? Jul 9, 2021 23:06 |
|
FogHelmut posted:This often goes on sale for much less this is the other one i was looking at, thoughts on the wire wings vs the metal ones, etc?
|
# ? Jul 9, 2021 23:15 |
|
Deviant posted:this is the other one i was looking at, thoughts on the wire wings vs the metal ones, etc? They're too short to make a difference either way if you're cutting something long.
|
# ? Jul 9, 2021 23:23 |
|
Deviant posted:Any recommendations for an inexpensive miter saw for someone who just needs to cut up 2x4s, trim, quarter round and the like now and again? Was thinking 10" sliding? You don't need a slider for that, but that's a nice saw for that price. So maybe you do need a slider.
|
# ? Jul 10, 2021 02:39 |
|
I. M. Gei posted:next week I got a miter saw Yeah it’s the 780 and not the 779, but I got the $599 price tag down to $519 using Home Depot’s price match guarantee with a deal I found at another place online. Even better, the $519 deal was TAX-FREE, and I somehow managed to sweet-talk my HD into excluding the tax on my price match too. I have no idea how I pulled that off since Home Depot’s price match policy doesn’t cover sales tax exclusions, but I did it. So basically I saved about $130 total on what would have been a $648.42 purchase. I know it’s still more than what I would’ve paid for the DWS779 without the klurf laser but………. DAMMIT SOMEONE PLEASE TELL ME I DIDN’T DO A FUCKUP HERE!! I actually felt kinda proud of myself for this.
|
# ? Jul 10, 2021 05:25 |
|
I. M. Gei posted:So basically I saved about $130 total on what would have been a $648.42 purchase. I know it’s still more than what I would’ve paid for the DWS779 without the klurf laser but………. DAMMIT SOMEONE PLEASE TELL ME I DIDN’T DO A FUCKUP HERE!! I actually felt kinda proud of myself for this.
|
# ? Jul 10, 2021 11:35 |
|
I. M. Gei posted:I got a miter saw What's up team yellow big saw buddy
|
# ? Jul 10, 2021 14:36 |
|
Deviant posted:Any recommendations for an inexpensive miter saw for someone who just needs to cut up 2x4s, trim, quarter round and the like now and again? Was thinking 10" sliding? I have this saw. It cuts good. If you don't need to cut larger pieces (or do so infrequently that you can just flip the board) I'm not sure you need to pay for a slider, though. That said, the build quality of the Metabo 10" slider is way better than the static one (which was my first miter saw and is now just a portable chop saw for pressure-treated wood). I like using the slider one while the other one makes me swear. So it may be worth it if you appreciate that sort of thing.
|
# ? Jul 10, 2021 15:50 |
|
Swears are part of construction and woodworking in general, I've found. However, a tool that forces a habitual swear is *not* a good tool. It is, in fact, a goddamned bad tool.
|
# ? Jul 10, 2021 17:26 |
|
Mr. Mambold posted:Swears are part of construction and woodworking in general, I've found. However, a tool that forces a habitual swear is *not* a good tool. It is, in fact, a goddamned bad tool. *kicks Ryobi belt sander over and over and over and over again*
|
# ? Jul 10, 2021 17:33 |
|
i think i'll probably just wait for the ryobi to go on sale unless the matebo is notably better. I've seen the ryobi as low as $180
|
# ? Jul 10, 2021 17:39 |
|
Literally A Person posted:*kicks Ryobi belt sander over and over and over and over again*
|
# ? Jul 10, 2021 17:45 |
|
stealie72 posted:So its not just me, right? It's impossible to keep the goddam belt on, right? No matter how light of a touch I take on that stupid yellow wing nut thing!!!! Honestly I just needed a sander that day and wouldn't usually slum it like that but it was like $35 at the home Depot and welp.....
|
# ? Jul 10, 2021 17:47 |
|
I've been wanting to get a rotohammer for a while now. I'll mostly be using it with a clay spade bit to dig, though I do have some other uses for it. I borrow a rotohammer or demo hammer from work on occasion to do this sort of stuff around my yard. I don't love the idea of spending a couple hundred bucks to keep from having to use a pinch point bar to dig, but I hate using that thing. I have 2 questions about this. 1) is there a better tool I can look for to help me dig in hard clay soil? 2) is buying a new gen battery powered rotohammer a bad idea? Should I buy corded? I don't expect to need to use the thing for 8 hour days at a time, and I currently have an opportunity to buy a cordless one for 35-40% off retail, but only have one (moderately large) battery for that battery system Edit: the demo hammer I borrow from the office is corded, so I have no frame of reference for how a cordless one works compared to corded. It's also way too big for my needs and is a pain to borrow regularly. Xenix fucked around with this message at 18:04 on Jul 10, 2021 |
# ? Jul 10, 2021 17:51 |
|
KKKLIP ART posted:What's up team yellow big saw buddy How do we differentiate Makita from Bosch? Team Blue vs. Team Blue/Red?
|
# ? Jul 10, 2021 18:28 |
|
Mr. Mambold posted:Swears are part of construction and woodworking in general, I've found. However, a tool that forces a habitual swear is *not* a good tool. It is, in fact, a goddamned bad tool. In fairness, my swearing is mostly related to the non-slider's dogshit pretend attempt at dust collection. I don't expect miracles on a miter saw but I expect at least an attempt. It's why I keep it for pressure treated stuff though, because I don't have to lug my nice one outside and I wouldn't be caught dead cutting that stuff inside. The slider does okay with a bag and surprisingly good with a vac.
|
# ? Jul 10, 2021 20:25 |
|
ROJO posted:How do we differentiate Makita from Bosch? Team Blue vs. Team Blue/Red? Makita isn’t Team Blue, it’s Team Teal.
|
# ? Jul 10, 2021 21:47 |
|
I. M. Gei posted:Makita isn’t Team Blue, it’s Team Teal. and it's still the best drill, driver and leaf blower i've ever owned
|
# ? Jul 10, 2021 23:16 |
|
Deviant posted:and it's still the best drill, driver and leaf blower i've ever owned I can't stop buying Makita tools.
|
# ? Jul 10, 2021 23:23 |
|
Literally A Person posted:
i love the leafblower for day to day cleanup driveway poo poo, but the best use so far is my roommate said to me: "hey, i have a work meeting tomorrow at 2pm i dont wanna do, can you just make a bunch of noise so i can claim my landlord is being a gently caress and drop off/mute?" to which i said "yes, yes i can." and that is the story of how my makita leafblower got a tour of the living room and bedrooms
|
# ? Jul 10, 2021 23:25 |
|
ROJO posted:How do we differentiate Makita from Bosch? Team Blue vs. Team Blue/Red? You don’t, but one for 18v and the other for 12v like I did.
|
# ? Jul 11, 2021 01:28 |
|
Deviant posted:i love the leafblower for day to day cleanup driveway poo poo, but the best use so far is my roommate said to me: Good thing your roommate doesn't have NVidia Voice.
|
# ? Jul 12, 2021 02:23 |
|
Deviant posted:and it's still the best drill, driver and leaf blower i've ever owned Drill, driver, circular saw, oscillating multi tool, sawzall, jigsaw, and angle grinder here. Just don’t show them my dewalt miter saw, they might get jealous.
|
# ? Jul 12, 2021 08:19 |
|
I. M. Gei posted:Makita isn’t Team Blue, it’s Team Teal. Lmao. Days later and I still love this quote.
|
# ? Jul 12, 2021 16:22 |
|
I bought that 90 degree drive yesterday. Used it exactly once to drive a 6" lag screw, and now I can't get the loving thing out. Anyone else have this issue, or is there something I'm missing to get this out? I'm considering bringing this whole thing back to Lowes and bitching at them that this piece of poo poo broke my hammer driver.
|
# ? Jul 12, 2021 16:42 |
|
SouthShoreSamurai posted:
What’s the attachment method? Is the locking system jammed? Try getting a narrow spanner on the exposed part of the hex and wiggling it back and forth.
|
# ? Jul 12, 2021 16:54 |
|
SouthShoreSamurai posted:
It's probably a tighter fit and/or has a burr on it so the clamp thing in the chuck isn't releasing. Pull the collar out on the drill and with a wrench (even a small adjustable) on the shaft of the attachment and wiggle. Also try pushing it further in with the collar out. Put some silicone or dry lube in the drill chuck to help with this in the future.
|
# ? Jul 12, 2021 17:01 |
|
SouthShoreSamurai posted:
Using a 90° with a hammer drill strikes me (don't, please) as very unsound fundamentals. Like you're begging for something bad to happen to the shaft.
|
# ? Jul 12, 2021 17:08 |
|
Mr. Mambold posted:Using a 90° with a hammer drill strikes me (don't, please) as very unsound fundamentals. Like you're begging for something bad to happen to the shaft. Sure, but I'd expect the gears that make the 90 to be the things that get destroyed. The shaft part that goes into the hammer drill is the same poo poo you put into a hammer drill with basically any other bit.
|
# ? Jul 12, 2021 17:12 |
|
Motronic posted:Sure, but I'd expect the gears that make the 90 to be the things that get destroyed. The shaft part that goes into the hammer drill is the same poo poo you put into a hammer drill with basically any other bit. I think it's detrimental to use a drill that hammers horizontally to have that force exerting practically oscillating in the socket- which word I should have used instead of shaft. I mean that's why the thing got stuck. Or I could just be woofing. <sjhrug>
|
# ? Jul 12, 2021 17:23 |
|
Try putting the driver in reverse (or forward, whichever is opposite from how you had it) and hold the end of the 90 adapter with a pair of pliers. Don't go crazy, but a few light dugga-duggas in the opposite direction usually loosens those up for me.
|
# ? Jul 12, 2021 17:31 |
|
B-Nasty posted:Try putting the driver in reverse (or forward, whichever is opposite from how you had it) and hold the end of the 90 adapter with a pair of pliers. Don't go crazy, but a few light dugga-duggas in the opposite direction usually loosens those up for me. Tools: Don't go crazy, but a few light dugga-duggas in the opposite direction usually loosens those up for me.
|
# ? Jul 12, 2021 17:34 |
|
I've had a Makita lock up just like that and it was addressed with the aforementioned duggas
|
# ? Jul 12, 2021 17:58 |
|
Have you given it a little tippy tap on the collar with some pliers or a hammer?
|
# ? Jul 12, 2021 18:21 |
|
Rufio posted:Have you given it a little tippy tap on the collar with some pliers or a hammer? As they say, "when in doubt, hammer it out".
|
# ? Jul 12, 2021 18:42 |
|
|
# ? Jun 10, 2024 12:44 |
|
El Jebus posted:As they say, "when in doubt, hammer it out". Also, when in need smoke some weed. Not tool related but still good advice.
|
# ? Jul 12, 2021 19:03 |