|
I was too busy to spend loving years (three minutes) grinding 18gm of beans for a v60 for the past almost month. The almost month being about a month past the six-week "best before" from the date the beans were roasted on. They were roasted just before Christmas, so I figured they were good until around the start of February, now it's almost March. I just made a cup with the most "delicate" of the beans. They have lost almost all nuance to them and it tastes like an OK coffee you'd get in a decent café that buys proper beans from a good roaster but haven't a clue about actually making the coffee or what's going into the cup (coffee.) I don't have much of these four 250gm bags of beans left, so it's not a huge problem, but the fall-off in quality is really surprising. Amazingly surprising to the point it was almost worth letting them lay idle just to see how much the six weeks from roast date is worth (a lot.) Now this means I'm going to have to rush through the back that was roasted at the end of January, spending loving years grinding (three minutes) to make however many single cups.
|
# ? Feb 25, 2022 08:54 |
|
|
# ? May 28, 2024 16:36 |
|
What are good roasters/coffee places in Calgary?
|
# ? Feb 25, 2022 12:05 |
|
Mrenda posted:I was too busy to spend loving years (three minutes) grinding 18gm of beans for a v60 for the past almost month. The almost month being about a month past the six-week "best before" from the date the beans were roasted on. They were roasted just before Christmas, so I figured they were good until around the start of February, now it's almost March. Whenever I get really good beans I batch out a bunch of small freezer portions with a foodsaver vacuum. The storage bags come in a long roll you cut and seal to size so you can portion out a few days' worth of beans into a bag without wasting any of the roll. I do this pretty much immediately when I get home and from there they go right into the freezer (minus whatever I'm drinking that week). Whenever I open a frozen package they go into a vacuum canister (probably overkill but my sister got it for me for Christmas). I don't think this stops the degradation process completely but it does really, really stretch it out. They're not like day-of fresh, but I've had beans go for a few months and were really good all the way up to the end.
|
# ? Feb 25, 2022 17:03 |
|
Do the bags puff up a bit since they off-gas CO2 so soon after roasting? Still good to vacuum seal because no oxygen though.
|
# ? Feb 25, 2022 17:57 |
BrianBoitano posted:Do the bags puff up a bit since they off-gas CO2 so soon after roasting? Still good to vacuum seal because no oxygen though. If you throw 'em in the freezer right away it'll slow down off-gassing so much that I never notice it. But also yeah, as you say, there really shouldn't be much oxygen left so even if it puffs up when you leave it out at room temp it's not a big deal.
|
|
# ? Feb 25, 2022 19:09 |
|
Pentecoastal Elites posted:Whenever I get really good beans I batch out a bunch of small freezer portions with a foodsaver vacuum. I think I would be thrown out a window if I bought another gadget for the kitchen. I'll just have to dial down to two bags of beans at a time and go to the effort of making a pourover regularly.
|
# ? Feb 26, 2022 06:21 |
|
BrianBoitano posted:Do the bags puff up a bit since they off-gas CO2 so soon after roasting? Still good to vacuum seal because no oxygen though. a very little bit after a while, just enough to get the beans a little looser rather than fused to the bag but it won't puff up on you after a few weeks in the freezer. Mrenda posted:I think I would be thrown out a window if I bought another gadget for the kitchen. I know the feeling but that thing plus a cheapo home depot chest freezer have saved me so much money
|
# ? Feb 26, 2022 06:28 |
|
NomNomNom posted:Coffee thread is long, confusing, and full of over-caffeinated weirdos. Our Oxo on-brain 9 cup dripper has lasted about 5 years and died and we need a new drip pot. Having a timer is a plus but not required. Bonavita was involved in some lawsuits and I think someone bought the brand? They are relaunching soon with the brewers and drippers.
|
# ? Feb 26, 2022 07:12 |
|
bolind posted:What are good roasters/coffee places in Calgary? I haven’t spent much time in Calgary, but I get coffee from Phil and Sebastian pretty often, and I always really enjoy it. I’ve also met a few people from Rosso, who have always been super cool, I want to check them out if I’m ever back out that way.
|
# ? Feb 26, 2022 14:08 |
|
Gunder posted:I've been making V60 pour-overs pretty much every day for the last two years. Until Hoffman's ultimate technique, I never really managed to get anything all that good out of my Aeropress. The pour-overs always tasted much better to me. The V60 can be pretty unforgiving though, and small inconsistencies or errors in technique will vary the outcome by quite a bit. Hey thought I'd chime in on this: Been doing this technique since you posted the video for it. Working with the v60 decanter. It's really good! Nothing I haven't done with Hoffman's, and they're not really terribly different, but the consistency on reaching that upper end of delicate flavours has been much higher. Helped the aroma a little bit too, which is something I never really expected.
|
# ? Feb 26, 2022 19:26 |
|
I decided to try my hand at making some coffee water with the Hendon Water recipe off Barista Hustle and realized after the fact that I took out only 100 out of the 130ml that's called for. Luckily there's no way that this can be worse than Texas tap water, but I'm a little mad at screwing up my first try. I'm probably going to be in the market for a new espresso machine before long. Right now I've got it narrowed down between the ECM Classika and the La Pavoni Professional. I almost never make milk drinks, so the Classika has basically all the features I would want (PID with integrated timer, easy access to pressure valve, flow rate upgrade) within my price range. A lever machine sounds extremely fun to learn, but the temperature control supposedly isn't the best plus I'd have to rebuy accessories. Anyone have any opinions on the two or recs that fall around/under the $1.8k-ish range?
|
# ? Feb 28, 2022 02:05 |
|
Spiggy posted:I decided to try my hand at making some coffee water with the Hendon Water recipe off Barista Hustle and realized after the fact that I took out only 100 out of the 130ml that's called for. Luckily there's no way that this can be worse than Texas tap water, but I'm a little mad at screwing up my first try. Maybe check out the Lelit MaraX? It's the machine I wish I'd bought when I got my first "proper" espresso machine. Edit: Also, look at the much fancier Lelit Bianca, although that might be out of your price range, I'm not sure what they charge for that in the US. Gunder fucked around with this message at 12:00 on Feb 28, 2022 |
# ? Feb 28, 2022 11:56 |
|
Mu Zeta posted:Bonavita was involved in some lawsuits and I think someone bought the brand? They are relaunching soon with the brewers and drippers. https://www.modernretail.co/retailers/the-rise-fall-and-potential-resurrection-of-a-coffee-brewing-legend/
|
# ? Mar 2, 2022 00:55 |
|
My wonderful child just dropped our porlex hand grinder and the ceramic burrs shattered. What hand grinder should I buy for travel mokapot and backup espresso for like €100 or less?
|
# ? Mar 3, 2022 19:00 |
|
Check out 1zpresso. They have a travel grinder for just a bit above your budget.
|
# ? Mar 4, 2022 04:34 |
|
other people posted:My wonderful child just dropped our porlex hand grinder and the ceramic burrs shattered. dang kid's a real stickler for optimal extraction huh
|
# ? Mar 4, 2022 04:42 |
|
So my morning French Press routine is changing, and I'm looking into buying a bigger one -- and a bigger kettle to go along with it. Currently I have a press that I think is 1L full capacity (I usually get 800 ml of coffee out of it, which I can stretch to 900 if I leave the top loose). And I have a stovetop gooseneck kettle that also appears to be about 1L. I see that Bodum sells up to 1.5L French presses, and I can even find a 1.75L on Amazon (SterlingPro -- not a brand I'm familiar with). For the kettle, I still want temperature control, so at that capacity I'm thinking maybe an electric kettle is the way to go. But it's hard to find any that have close to 1.5L of water and also a gooseneck. I could definitely do without the gooseneck if necessary, but it'd be nice. Any recommendations from personal experience? Or conversely, is there any issue with doing >1L of French press that I should be aware of?
|
# ? Mar 4, 2022 14:49 |
|
Sir Lemming posted:So my morning French Press routine is changing, and I'm looking into buying a bigger one -- and a bigger kettle to go along with it. Currently I have a press that I think is 1L full capacity (I usually get 800 ml of coffee out of it, which I can stretch to 900 if I leave the top loose). And I have a stovetop gooseneck kettle that also appears to be about 1L. I don’t think there are any gooseneck electric kettles that big, tbh. Might be worth picking up an inexpensive but high-volume non-GN if you plan to use it every day. It’s not like you need the gooseneck precision for French press nearly as much as for, say, pourover. FWIW, my roommate and I use a non-gooseneck kettle for French press and even pourover/clever and it works fine for my needs, I assume it works fine for his. I’d love to get a Stagg, and will probably do so in time, but until then the Oster has digital temp control up to like 220 degrees and holds a ton of water
|
# ? Mar 4, 2022 15:27 |
|
Sir Lemming posted:So my morning French Press routine is changing, and I'm looking into buying a bigger one -- and a bigger kettle to go along with it. Currently I have a press that I think is 1L full capacity (I usually get 800 ml of coffee out of it, which I can stretch to 900 if I leave the top loose). And I have a stovetop gooseneck kettle that also appears to be about 1L. Bonavita appear to make a 1.7L temperature controlled gooseneck electric kettle, though it’s out of stock everywhere I can find at the moment. That said I think it’s kind of an unnecessary luxury for French press unless you’re using dark roasts, as water just off the boil will be fine for light or medium. Is there any particular reason you want to keep using the press for this much volume? 1.5L is almost exactly the capacity of a 9-cup drip machine (the oxo gets good reviews), which seems like an easier way to get that. If you do want to stick with press, 1.5L is enough that I’d want to get a thermal carafe to transfer it to once it’s brewed, and maybe even a fancy ember mug to drink it. Those would be my priorities over throwing a hundred bucks or more at a giant temp controlled kettle.
|
# ? Mar 5, 2022 15:50 |
|
Aeropress costs $40 now. It was $30 just a few days ago
|
# ? Mar 5, 2022 17:30 |
|
I see Ember decided to start making mugs the size one would actually drink from rather than their tiny poo poo, but drat, nearly $200 for the pretty ones. Think I got mine for $80 (then promptly gave it away bc it’s fuckin tiny)
|
# ? Mar 5, 2022 17:33 |
|
I see them all the time at costco, $100 for the 14oz size. I had one in my cart last time I was there but put it back on the shelf at the last minute so I’ll be bummed if they’ve raised the price
|
# ? Mar 5, 2022 17:47 |
|
This is probably an incredibly dumb question but at what point do you start getting diminishing returns from WDT? I'm currently using a small paperclip to do WDT. I know that the little WDT tools with multiple needles are probably better since you cover a lot more area, and I was thinking about making one with some cork and 4 mm acupuncture needles. Is there any reason to "upgrade" past that?
|
# ? Mar 5, 2022 17:53 |
|
AnimeIsTrash posted:This is probably an incredibly dumb question but at what point do you start getting diminishing returns from WDT? No. This super spergy dude I know uses 4mm on the bottom of his espresso and 2mm at the top. I don’t see the need for that.
|
# ? Mar 5, 2022 18:27 |
|
Not related to needle size, but you can 3d print a nice holder. Many libraries and universities let you print for pennies, or I think there are sites that will print and ship. I did DIY with a cork before this was available. I had to add hot glue to stop them from slipping around.
|
# ? Mar 5, 2022 19:37 |
|
AnimeIsTrash posted:This is probably an incredibly dumb question but at what point do you start getting diminishing returns from WDT? Depends on how clumpy the grounds are, honestly. My Specialita doesn't clump much so I basically do a very quick stir, but with something more prone to static it'd probably be worth being more thorough. If what you have works well enough to make your grounds mostly homogenous in a short time, the reasons for upgrading are largely aesthetic. E: for reference I use this:
|
# ? Mar 5, 2022 19:46 |
|
gotta give props, I thought Stumptown was too mainstream and beneath me but their Homestead blend really does taste like milk chocolate
|
# ? Mar 6, 2022 00:38 |
|
did someone say stumptown https://www.youtube.com/watch?v=fl8hPfs3o8c
|
# ? Mar 6, 2022 00:47 |
|
Doesn't matter what method of brewing you use, if you aren't chanting to yourself "three tablespoons, just three tablespoons" during preparation then you are doing it wrong.
|
# ? Mar 6, 2022 00:53 |
|
mistermojo posted:gotta give props, I thought Stumptown was too mainstream and beneath me but their Homestead blend really does taste like milk chocolate The stumptown beans are great if you can get them in reasonable timeframe from roast. The issue is most people buy em in the supermarket at they’re olds.
|
# ? Mar 6, 2022 03:25 |
|
hypnophant posted:Bonavita appear to make a 1.7L temperature controlled gooseneck electric kettle, though it’s out of stock everywhere I can find at the moment. That said I think it’s kind of an unnecessary luxury for French press unless you’re using dark roasts, as water just off the boil will be fine for light or medium. Well the gooseneck is definitely the least important thing by far, I honestly wasn't even sure what it does, I just like the feel of the small stovetop one I have. I guess it's a similar answer for French press vs. drip machine -- I've just been using the press for so long at this point. The last time I used a drip machine I was still buying pre-ground. So maybe I just have an unfairly negative perception of it.
|
# ? Mar 6, 2022 04:09 |
|
AnimeIsTrash posted:This is probably an incredibly dumb question but at what point do you start getting diminishing returns from WDT? i used a nice cork with a wooden knob end and some bits of old guitar wire. been working perfectly fine for years
|
# ? Mar 6, 2022 05:31 |
|
withak posted:Doesn't matter what method of brewing you use, if you aren't chanting to yourself "three tablespoons, just three tablespoons" during preparation then you are doing it wrong. That line will stick with you even through ego death
|
# ? Mar 6, 2022 12:45 |
|
Sir Lemming posted:Well the gooseneck is definitely the least important thing by far, I honestly wasn't even sure what it does, I just like the feel of the small stovetop one I have. Cheap drip machines (your classic mr coffee, for instance) aren’t great, since they don’t really put out consistent water temps and have uneven showerheads. They’re usually impossible to clean properly too. The nicer tier of oxo or bonavita machines do a good job though, and then there’s the top end of technivorm or breville which make something on par with or close to a really good pourover. If you love the french press there’s no need to switch, but they make sense and do a good job for a larger quantity of coffee. Gooseneck- the nice thing about a gooseneck kettle is that you can deliver a smooth stream of water right where you want it, which makes pourovers (especially v60-style) easier. It’s not really necessary even for the v60 and for an immersion brew like french press I’d say it’s total overkill.
|
# ? Mar 6, 2022 14:58 |
|
hypnophant posted:Cheap drip machines (your classic mr coffee, for instance) aren’t great, since they don’t really put out consistent water temps and have uneven showerheads. They’re usually impossible to clean properly too. The nicer tier of oxo or bonavita machines do a good job though, and then there’s the top end of technivorm or breville which make something on par with or close to a really good pourover. If you love the french press there’s no need to switch, but they make sense and do a good job for a larger quantity of coffee. where does the idea of good drip machines making coffee close to a good pourover come from. they make good coffee, but definitely not close to a good pourover
|
# ? Mar 6, 2022 16:29 |
|
sugar free jazz posted:where does the idea of good drip machines making coffee close to a good pourover come from. they make good coffee, but definitely not close to a good pourover my understanding was that they could hit comparable ey% but I admittedly do not own either of the models I mentioned and haven't had a cup off them
|
# ? Mar 6, 2022 16:50 |
Need an assist on my coffee game, goons. Current setup is: * Braun BrewSense drip maker with thermal carafe, for when I need many coffee * Delonghi Dedica for espresso * pourover carafe * pourover dripper * cosori gooseneck kettle * oster burr grinder We mostly buy grocery store beans and the vacuum sealed espresso packs because I've yet to find a convenient local roaster, and mostly use preground for workday morning beans. We're currently at our wit's end with the Braun because the carafe gets the air outlets plugged up while brewing, causing 75% of the brew to end up on our kitchen counter. We'd like to change things up, and I'm wondering how best to optimize the value proposition here. I know that my choice of beans and grinder are holding me back from getting really good pourover, but my wife generally doesn't care so long as home coffee is better than work coffee (and she's got a muldoons machine at work, so that's not difficult). We've also got a baby, which means that lots of coffee with minimal intervention is important, so the drip maker gets a lot of use and there are many mornings where a quick pot is more important than a good pot. Given this setup, what're your opinions on the most effective places to spend money or add effort to get better coffee. Also, are there any grinders that can do drip and espresso grinds? Everything I read seems to say that if you have a a grinder that claims to do both, it'll generally do one well and one lovely.
|
|
# ? Mar 13, 2022 15:41 |
|
ChickenWing posted:Need an assist on my coffee game, goons. I’d say beans are the easiest upgrade (and cheapest). How much do you want to spend? How fiddly can your process be? Do you care about tweaking it? A new drip machine is pretty easy and will get you good coffee for minimal effort. Personally I wouldn’t go wild on a grinder if you want mostly drip
|
# ? Mar 13, 2022 16:27 |
Sweeper posted:I’d say beans are the easiest upgrade (and cheapest). How much do you want to spend? How fiddly can your process be? Do you care about tweaking it? For drip coffee, minimum fiddle. I like to grind my beans on weekends but generally low fuss low muss. For the rest, I'm happy with a fiddly process and moderate expense. Not necessary budget but not super enthusiast either. Happy to tweak processes Beans as the cheapest upgrade is surprising because goddamn they seem to be expensive locally
|
|
# ? Mar 13, 2022 17:12 |
|
|
# ? May 28, 2024 16:36 |
|
I got my parents the oxo 9-cup and they really like it. Good coffee, very simple UI. Solid thermal carafe too. It's about twice the price of your Braun but worth it, I think
|
# ? Mar 13, 2022 17:30 |