|
Arsenic Lupin posted:Woddido? I AM THE LORD, THY BOSCH. THOU SHALL HAVE NO OTHER DISHWASHER BEFORE ME. First commandment, dude.
|
# ? Jun 24, 2022 04:46 |
|
|
# ? May 8, 2024 05:41 |
|
All have sinned and fallen short of the grace of Bosch.
|
# ? Jun 24, 2022 04:51 |
|
Nice report, but your mod is a godless dishwasherless heretic, bwahahaha!
|
# ? Jun 24, 2022 05:44 |
|
FISHMANPET posted:E: Also, growing up I ended up watching a fair amount of "New Yankee Workshop" and always had some little dream in the back of my head of having a nice big workshop. Whattup "New Yankee Workshop" buddy? Growing up in hot as hell Texas it was fun watching This Old House and seeing them do all this stuff with heating oil and furnaces and basement boilers and had never seen anything like that before. We didn't even have basements because the water table was like 1" underground. If you put a basement in your house it would be full of water the next morning. New Yankee Workshop ruled. Norm Abram was the real talent on that show.
|
# ? Jun 24, 2022 06:04 |
|
moana posted:Nice report, but your mod is a godless dishwasherless heretic, bwahahaha! Everyone's got a dishwasher. If you think you don't . . . well, yer it.
|
# ? Jun 24, 2022 07:38 |
|
Zarin posted:Everyone's got a dishwasher. If you think you don't . . . well, yer it. Paper Platests and their heretic plastic cutlery ways.
|
# ? Jun 24, 2022 13:09 |
|
I just discovered that eBay has a ton of old vintage hinges and outlet covers that would look great in my 111 year old craftsmen house. What a fun rabbit hole to go down.
|
# ? Jun 24, 2022 14:05 |
|
BaseballPCHiker posted:I just discovered that eBay has a ton of old vintage hinges and outlet covers that would look great in my 111 year old craftsmen house. What a fun rabbit hole to go down. Also check out your local re-store if you have one. you can probably get a bucket of those for 20bux.
|
# ? Jun 24, 2022 15:32 |
|
BigPaddy posted:Paper Platests and their heretic plastic cutlery ways. Then it's the landfill
|
# ? Jun 24, 2022 15:40 |
|
gp2k posted:Whattup "New Yankee Workshop" buddy? Also hometime. The first couple seasons focused on simple projects like patios, irrigation, decks, retiling a floor, etc.
|
# ? Jun 24, 2022 16:49 |
|
Chiming in to say This Old House is an American TV institution and I’ve learned a huge amount over the years from their archive. Hope they continue to kick rear end.
|
# ? Jun 24, 2022 16:53 |
|
Inner Light posted:Chiming in to say This Old House is an American TV institution and I’ve learned a huge amount over the years from their archive. Hope they continue to kick rear end. gp2k posted:Norm Abram was the real talent on that show.
|
# ? Jun 24, 2022 17:02 |
|
Further chiming in to say there is an This Old House channel on Pluto TV freely accessible. Makes for great background viewing while involved in a project. Just don't over-caulk as you get caught up staring dreamily at the New England hunks
|
# ? Jun 24, 2022 17:05 |
|
Arsenic Lupin posted:Welp, today was the day we gave up all hope of a Bosch. The salesman at the appliance store where we'd ordered a Bosch from in August called and said Bosch had pushed the delivery date back to January 2023 at the earliest, and he wasn't confident it would ship then. We have to have an ADA-compliant dishwasher because they're the only ones that will fit under our heavy cast countertops. He offered a Haier/GE that got Godawful reviews, including being unable to fit 10" dinnerplates without chipping them. We were grimly weighing a bad dishwasher vs. no dishwasher, so I called back and asked him to see if there were any other brands they carried that would arrive sooner than January. He came back with a Whirlpool that got a decent review in Consumer Reports and will be available July 19th, God willing, and we said, yes, let's do that. I have the top of the line Whirlpool (3rd rack, full stainless tub, 4xdb quiet) and I have zero complaints with it. It came with the house but it performs very well and I won't replace it until it dies. Now my Whirlpool wall oven is trash and I hate it so much and I consider replacing it at a cost of over 3K every time I use it.
|
# ? Jun 24, 2022 17:05 |
|
I really have tried to like my electric smoothtop range that came with the house but it’s a gigantic piece of poo poo with the oven. Any recommendations for induction ranges?
|
# ? Jun 24, 2022 17:09 |
|
nwin posted:I really have tried to like my electric smoothtop range that came with the house but it’s a gigantic piece of poo poo with the oven. Partner and I snagged the Frigidaire 30 in. 5.4 cu. ft. Front Control Induction Range with Air Fry in Stainless Steel and have been real pleased with it so far!
|
# ? Jun 24, 2022 17:11 |
|
Johnny Truant posted:Partner and I snagged the Frigidaire 30 in. 5.4 cu. ft. Front Control Induction Range with Air Fry in Stainless Steel and have been real pleased with it so far! Three questions because that’s an amazing price. 1) can you lock the front controls? I’ve got a toddler that would love to start everything up. 2) how easy/hard is it to adjust the heat on a burner? I’m used to knobs and pushing a button down a bunch seems like it would be a pain. 3) any of your pans make an annoying hum? I’ve got a cheap hot plate that’s induction and some of my pans do that. It’s like the met vibrating super fast.
|
# ? Jun 24, 2022 17:41 |
|
nwin posted:Three questions because that’s an amazing price. 1) yup! I haven't tried it myself since we don't have a toddler, but if I remember I'll lock it then try to get my partner to make something lol 2) it took a little getting used to, cause I'm used to knobs as well. takes maybe a 1 to 1.5 second press to turn the burner on, but then it's much easier to adjust after the initial start 3) we haven't really noticed specific pans, but if you put it on the 'P' setting for "powerheat my poo poo FAST" it is definitely audible within 1, maybe 2ft of the stove. There's also a version with the controls in the back, if you wanted another level of toddler protection.
|
# ? Jun 24, 2022 18:21 |
|
Inner Light posted:Chiming in to say This Old House is an American TV institution and I’ve learned a huge amount over the years from their archive. Hope they continue to kick rear end. Tom Silva is weirdly active on Tik Tok, along with his daughter
|
# ? Jun 24, 2022 18:52 |
|
Johnny Truant posted:1) yup! I haven't tried it myself since we don't have a toddler, but if I remember I'll lock it then try to get my partner to make something lol Thanks! One review said that the interface was hard to understand and they needed the manual to figure things out. Is that accurate at all?
|
# ? Jun 24, 2022 18:53 |
|
I love This Old House so much. Though they're at least partially to blame for inspiring confidence in me to tackle projects larger than I ought to.
|
# ? Jun 24, 2022 18:55 |
|
Tiny Timbs posted:Tom Silva is weirdly active on Tik Tok, along with his daughter This is a blessing and a curse to know about, and overall saddens me. Maybe this will get me to understand how to use TikTok?
|
# ? Jun 24, 2022 19:03 |
|
nwin posted:Thanks! One review said that the interface was hard to understand and they needed the manual to figure things out. Is that accurate at all? I haven't had to bust the manual out yet, but I'll hazard a guess that since you're coming from knobs/buttons like I did, it'll be a slight learning curve for a range. And seeing as every stove we've dealt with previously had 0 learning curve, it is definitely weird. I think the only thing that took a couple tries before really figuring out is you have to press the like, ON/START button more than you would think, lol. Oh, and the timer was weird to start... think its minimum increment is 1 minute, not seconds? I kind of forget that one, but can check when I get home if you'd like.
|
# ? Jun 24, 2022 19:12 |
|
Johnny Truant posted:I haven't had to bust the manual out yet, but I'll hazard a guess that since you're coming from knobs/buttons like I did, it'll be a slight learning curve for a range. And seeing as every stove we've dealt with previously had 0 learning curve, it is definitely weird. Nah, the timer doesn’t bug me. I’m mainly seeing some confusion about the lock button. Some people say it only locks oven controls and other people say it locks everything (cooktop and oven). Also-have you used the oven yet? Some reviews say it’s loud and you can hear the fan rattling when you use convection/airfry. I’d really like the GE Profile but it’s $3500 and it’s backordered for a few months so I’ll pass on that.
|
# ? Jun 24, 2022 19:21 |
|
nwin posted:Nah, the timer doesn’t bug me. I’m mainly seeing some confusion about the lock button. Some people say it only locks oven controls and other people say it locks everything (cooktop and oven). Ah yeah, I haven't tried the lock function yet. I'm about to bounce from work so I'll check it when I get home and report back. Used the oven and the air-fryer, and I mean you can hear the fan sure? Doesn't rattle imo, it's just the sound of a muffled fan. Can't really hear it farther than... 6ft maybe?
|
# ? Jun 24, 2022 19:33 |
|
I read a bunch of reviews on that unit and I came to the conclusion that a number of units seemed to suffer enough jostling in transit and/or the units aren't properly packed from the factory, so there can be some oddities like heating elements shifting under the glass, or some kind of bending or movement that will cause the convection fan to rattle. Or the quality control at the factory is abysmal and they leave the factory like that. If I ever convince my wife to go to induction, I'd buy it from my local appliance place, and talk to them about my concerns about the prior handling of the unit, and get some kind of guarantee that take care of any issues that were present at the time it was delivered. They've done right by me so far, replacing a defective door switch in my fridge that was defective when they delivered it. I'm getting my second appliance from them delivered tomorrow, and so far I've been very happy to go with a local place that uses their own employees for delivery, vs going to a big box store. And the prices are the same anyways, so it's a win-win for me.
|
# ? Jun 24, 2022 19:59 |
|
Back to the dehumidifier I posted about. If I’m going to connect the AC condensate line to the pvc pipe I’ll drill through the foundation, where would be a good place to drill through? Think I’d be safe drilling right above the window or should I go to the left/right of window?
|
# ? Jun 24, 2022 20:03 |
|
nwin posted:
I'd probably drill near the top of the window for height but towards one side with the expectation that the outlet on the outside will run down away from the house. You'll want a rotary hammer drill and a masonry bit (that's compatible with the drill, most are SDS, SDS+ or SDS Max) to get through concrete, and there's the fun part of potentially hitting the steel supports inside of it. I'd make it as small as you can get away with, sloping away from the house, and give some thought to pest intrusion if it's PVC going through. Here we have the condensate pump tube and the AC condenser tubes and power all running through this cinderblock. On the outside the tube runs 10+ feet out and it hasn't been a problem unless it freezes up in the winter and the humidifier is trying to drain through it. I think the HVAC guys did this run in the 80s and reused the hole 20 years ago when it was redone. The AC was replaced last year but I doubt the replaced the copper because look at all that green corrosion. I'm sure that won't be a problem very soon.
|
# ? Jun 24, 2022 23:36 |
|
nwin posted:
I see your oil fill and vent there. Rather than blowing through your foundation it's probably going to be a lot easier to go through the rim joist like those two things almost definitely are. Track them down inside and see if you have access to do it that way rather than going all SDS drill and poo poo. As to where? As close to that corner on the left as you can get it, because you should pipe it right into that underground downspout extension which is taking water very very far away from your house, already exists, and is a gravity drain.
|
# ? Jun 25, 2022 00:38 |
|
Looks like it's a matter of moving a bit of insulation aside, unless it's blocked off to the right of what's shown in the above pic.
|
# ? Jun 25, 2022 01:04 |
|
Here’s a quick picture without moving the insulation: I’ll have to do some research on going into the rim joist unless it’s as simple as someone used a hole saw on the side of the house to get those two pipes through it. If that’s the case, maybe just use the same hole or a new hole next to the existing ones? I’ll also have to figure out how to tap into that pvc drain-great catch in noticing that! As an aside…I see these shims all over the top of the basement. Any idea what they are for?
|
# ? Jun 25, 2022 01:12 |
|
nwin posted:I’ll have to do some research on going into the rim joist unless it’s as simple as someone used a hole saw on the side of the house to get those two pipes through it. If that’s the case, maybe just use the same hole or a new hole next to the existing ones? New holes. Now you know where you can make them. And yes, it's that simple. Since you have wood siding you want to go from the outside so the finished hole looks nice out there. The shims are literally shimming your rim joist level on the block foundation. You can cut them off where they hang over if you like. The business end of them are clamped between the frost wall and where the wood part of your house starts.
|
# ? Jun 25, 2022 01:19 |
|
My guess is the top of the foundation walls isn't perfectly flat and they used shims so the sill plate would actually sit flat, but it's weird they didn't cut off the parts of the shim that are sticking out so that could be a bad guess. Also yes, you can go right through the beam that pipe is going through, as long as you leave enough of the wood intact that it retains sufficient strength. So don't completely saw through the beam, and if it looks like it's already pretty compromised you can move over a bit to the next span between the ceiling joists. e. yeah what he said. I guess it's the rim joist and not a sill plate?
|
# ? Jun 25, 2022 01:20 |
|
Leperflesh posted:e. yeah what he said. I guess it's the rim joist and not a sill plate? Probably shimming the sill (technically sole) plate, yeah. I'm being imprecise as I've had quite a day. (I installed a new service and panel to a friends barn and finished exactly 15 minutes after the wedding rehearsal began - wedding is tomorrow. Nothing like last minute cable pulling and panel installs)
|
# ? Jun 25, 2022 01:27 |
|
Motronic posted:Probably shimming the sill (technically sole) plate, yeah. I'm being imprecise as I've had quite a day. My goodness how much beer does that cost with the wedding tax?
|
# ? Jun 25, 2022 01:50 |
|
H110Hawk posted:My goodness how much beer does that cost with the wedding tax? To be fair it's not my best/cleanest work. My miniex and dump trailer are also sitting up there still from digging the trench for the conduit. It's that kind of friend. (I will be re-dressing that panel when this is all over)
|
# ? Jun 25, 2022 02:08 |
|
Did you do it in a tux, or did that come after? And what kind of beer was your pay? And I guess did the beer arrive during or after work?
|
# ? Jun 25, 2022 02:25 |
|
Alarbus posted:Did you do it in a tux, or did that come after? And what kind of beer was your pay? Wedding is tomorrow so no tuxes. Also, I had to work in a hot panel on the house side that feeds this new panel so no beer. It was offered of course but I'd rather not die.
|
# ? Jun 25, 2022 02:31 |
|
An eventful morning full of progress! The calvery: Action! To be continued Monday:
|
# ? Jun 25, 2022 03:56 |
|
|
# ? May 8, 2024 05:41 |
|
That’s some dope crane content OP. Big logs
|
# ? Jun 25, 2022 04:13 |