|
The local stores don't carry Krylon so I got a cheap Maston grey. I've got a bunch of Blood Bowl elfs I did some paint crimes on years and years ago, they'll be my first project.
|
# ? Jul 5, 2022 15:17 |
|
|
# ? Jun 5, 2024 06:25 |
|
Be careful with the cheap spray paints. Always spray one model first. I did not heed that advice and sprayed a squad of second hand chaos space marines with some beautone paint and it took way too many coats anf i lost some detail
|
# ? Jul 5, 2022 15:31 |
|
Silhouette posted:Nooooooo those textured paints will fill in small details, they're basically a filler primer I thought that they might serve for large, flat panels or Paul drones Is there another way to get this effect?
|
# ? Jul 5, 2022 17:11 |
|
Professor Shark posted:I thought that they might serve for large, flat panels or Paul drones https://www.amazon.com/Vallejo-Brown-Earth-Gel-200ml/dp/B0044LDRGU Apply very thin and splotchy
|
# ? Jul 5, 2022 17:44 |
|
Professor Shark posted:I thought that they might serve for large, flat panels or Paul drones You could mask off the rest of the model and just spray the areas of interest.
|
# ? Jul 5, 2022 18:14 |
|
Spanish Manlove posted:https://www.amazon.com/Vallejo-Brown-Earth-Gel-200ml/dp/B0044LDRGU I used "dark earth" for the base of my earlier model post, you can give it some peaks and everything if you want.
|
# ? Jul 5, 2022 18:19 |
|
The vallejo textures come in different grit and finishes. All are pretty good. I like that particular one for anything <=40mm and the white pumice for anything >40mm bases.
|
# ? Jul 5, 2022 22:34 |
|
My Spirit Otter posted:Be careful with the cheap spray paints. Always spray one model first. I did not heed that advice and sprayed a squad of second hand chaos space marines with some beautone paint and it took way too many coats anf i lost some detail I bought a cheap brassy spray for some Stormcasts... I now have a fine blocky statue-like figurine that could be a small terrain piece. But only the one, I was at least that smrt.
|
# ? Jul 5, 2022 22:59 |
|
Placentaur posted:It’s pretty close to Extinction Angels, which I only know because it’s firmly in the “so bad it’s good” category of chapter/warband names First time reading about these guys and I concur that name is so bad it's loving amazing. Makes me want to start a Chaos Marine warband of them.
|
# ? Jul 5, 2022 23:13 |
|
Biggest model I've painted to date - Abomination Dragon. Loved painting this model and found painting it in pieces made it actually easier for the most part. What's great is that this guy is going to find it's way into the D&D campaign I'm currently DM'ing
|
# ? Jul 6, 2022 02:49 |
|
Did a few Stargrave minis, loot tokens really, for some easy wins. I needed something simple. I wanted to do the brain with ONLY speed paints, and well, 3 of the colors are, but I had to do the highlights with regular acrylics, namely the white and the green since there wasn't anything in the speedpaint line as saturated as I wanted.
|
# ? Jul 6, 2022 03:15 |
|
Boogity boogity boogity: a pumpukin.
|
# ? Jul 6, 2022 08:29 |
|
I will not get that punkin
|
# ? Jul 6, 2022 10:16 |
|
I'm looking to start an Escher Gang and wouldn't mind buying another box of something to convert them, recommendations? I'm interested in keeping their punk stylings but toning down the sexuality; I think in particular a "hips down" conversion would let me replace the booty shorts, fishnet stockings, and heels? I already own the Soritas kill team box and haven't yet assembled those repentia. I also have unassembled Novitiates but upon first examination the heads seem to be molded to the body and I don't think I could do anything with that. Maybe the Victoria Miniatures guard, mixing and matching pieces? Do those scale with modern Escher? Edit: I'm reviewing the Escher squad and they have pants, don't know what I was thinking earlier. I think I read some goonhammer article on the models, with pictures of them unpainted, and just misremembered. Jack B Nimble fucked around with this message at 14:12 on Jul 6, 2022 |
# ? Jul 6, 2022 14:07 |
|
Jack B Nimble posted:I'm looking to start an Escher Gang and wouldn't mind buying another box of something to convert them, recommendations? I'm interested in keeping their punk stylings but toning down the sexuality; I think in particular a "hips down" conversion would let me replace the booty shorts, fishnet stockings, and heels? Have you seen these conversions? https://youtu.be/RMi6hZ1P_pI I would think there is a better economy in buying non-GW heads like the ones from Victoria miniatures. If you know someone with a 3D printer I'm sure they'd be happy to print out as many teeny tiny mohawked heads as you want.
|
# ? Jul 6, 2022 14:16 |
|
I hadn't; they look great from what I can see skimming the video, though I wish it'd showcase them more.
|
# ? Jul 6, 2022 14:32 |
|
I painted some stuff for Rangers of Shadow Deep and Silver Bayonet Some undead creatures from the long forgotten past. Giant flies, because my old models sucked and I finally figured out how to get reliable results from my 3D printer.
|
# ? Jul 6, 2022 14:53 |
|
Anyone have ideas about hobbyist-level seamless backdrops? I've been thinking about a moonscape and a cityscape, but not sure how to buy or print something that big. I was looking at like >1m width, like a good size painting. more like a small diorama backdrop. ^the above totally reminded me that I was trying to look into this, not going to pretend otherwise
|
# ? Jul 6, 2022 17:00 |
|
Any great way to desaturate a color after the fact? glazes? I have a bunch of dead knights on a base I've tinted with some contrast, but they are much too colorful. I'm already darkening them with some agrax earthshade and plan on hitting them with a drybrush of a dark metallic for some weathering.
|
# ? Jul 6, 2022 17:04 |
|
Vaporware posted:Anyone have ideas about hobbyist-level seamless backdrops? I've been thinking about a moonscape and a cityscape, but not sure how to buy or print something that big. I was looking at like >1m width, like a good size painting. more like a small diorama backdrop. Are you trying to use it for pictures or for use in a diorama? For pictures just go to any craft store with fabric and pick something you think looks cool. Then just drape it on something or use painters tape to secure it to something like the wall behind your desk or two paper towel holders https://www.walmart.com/ip/Mainstay...ectedSellerId=0 You can also get cheap posterboard and do the same thing.
|
# ? Jul 6, 2022 17:12 |
|
w00tmonger posted:Any great way to desaturate a color after the fact? glazes? Look up “filters” with respect to miniature painting, basically very dilute glazing. I think oils tend to work better that dilute, but you can get away with it using acrylics, especially with an airbrush instead of regular brushing. Could be worth consulting some colour theory in addition to using black or muddy tones to darken, a complementary colour layered overtop might be more effective at changing your overall vibrancy instead of looking like you put mud overtop a really bright colour.
|
# ? Jul 6, 2022 17:29 |
|
Indolent Bastard posted:I painted some stuff for Rangers of Shadow Deep and Silver Bayonet Where are these from? I need a set!
|
# ? Jul 7, 2022 14:55 |
|
Zark the Damned posted:Where are these from? I need a set! https://gamedecor.com/undead-heroes-of-the-realm.html (This is a digital product for use with 3D printers and is provided via direct download from GameDecor.com This is NOT a physical product.)
|
# ? Jul 7, 2022 15:09 |
|
I'm looking to get a better light for my painting setup. There's this one light from amazon I see everyone recommend but it's too big for my space. So would I be able to get by okay if I just bought a desk lamp with a clamp and got some daylight bulbs for it?
|
# ? Jul 7, 2022 15:12 |
|
Should be fine, that's basically what I use. I just have 3 of them. left, right and overhead
|
# ? Jul 7, 2022 15:14 |
|
Good news everyone: https://www.youtube.com/watch?v=pPLHZKPR9Bc how to all the techniques.
|
# ? Jul 7, 2022 20:42 |
|
Anyone have advice for making bases with a crushed glass effect? I want something that looks like the Dark Angels Dread Wing just absolutely blasted the place; nothing but fine dust and a landscape turned almost to glass.
|
# ? Jul 7, 2022 22:05 |
|
Maybe try crushed glass medium? Might be too uniform for your needs though.
|
# ? Jul 7, 2022 22:10 |
|
Gato The Elder posted:Anyone have advice for making bases with a crushed glass effect? I want something that looks like the Dark Angels Dread Wing just absolutely blasted the place; nothing but fine dust and a landscape turned almost to glass. Do you want like big shards of glass like you broke a bottle? Or a ton of little shards like broken safety glass (think car wreck)? Former: take a blister pack and cut the plastic up into shards, glue with some clear Elmer's glue that you can find at office Depot, Walmart, or anywhere with a school supply section. Then you can use gloss varnish to make them shiny. Latter: clean out your coffee grinder or spice grinder, put some clear hard plastic in there like from a chessex dice box. Wear an n95 and chem goggles, also do this outside if you can, and grind that poo poo up. Glue with that clear glue, gloss varnish. Then thoroughly clean that grinder.
|
# ? Jul 7, 2022 22:11 |
|
I think you could probably get away with a standard crackle paint painted gloss black with some dark weathering dust in the cracks, or if you found a transparent enough crackle medium you could paint that straight over a painted base and see what it gets you.
|
# ? Jul 7, 2022 22:13 |
|
You could use Mordant Earth and paint it to simulate broken glass or mirror pieces or whatnot. I am using it to make a broken ice base and that is kind of similar.
|
# ? Jul 7, 2022 22:14 |
|
Gato The Elder posted:Anyone have advice for making bases with a crushed glass effect? I want something that looks like the Dark Angels Dread Wing just absolutely blasted the place; nothing but fine dust and a landscape turned almost to glass. What about something like one of GW's technical paints, like Mordant Earth (seen below, making lava). Paint it all black, with some light blue-green highlights, and then a very glossy coat or two over the top.
|
# ? Jul 7, 2022 22:15 |
|
Jack B Nimble posted:I hadn't; they look great from what I can see skimming the video, though I wish it'd showcase them more. It's your lucky day. Warhammer 40k Army Showcase. Punk Rock Sisters of Battle https://youtu.be/bdcTuFSC5oI
|
# ? Jul 7, 2022 22:33 |
|
I know Mordant Earth was my first suggestion, because that is what I have on hand, but I think some of these crackle paints would work even better. They have white and clear ones: https://www.viva-decor.com/en/paints/effect-paints/texture-effect/166/artline-crackling-color-250-ml-6-colors You could do the clear over a small circular mirror and it might be cool!
|
# ? Jul 8, 2022 00:04 |
|
Did some Legion models last month. The weathering on the bottom of the AT-ST...box didn't really pan out the way I was hoping, but it was a learning experience.
|
# ? Jul 8, 2022 00:34 |
|
Lucinice posted:I'm looking to get a better light for my painting setup. There's this one light from amazon I see everyone recommend but it's too big for my space. So would I be able to get by okay if I just bought a desk lamp with a clamp and got some daylight bulbs for it? I have two of these on my desk https://www.ikea.com/jp/en/p/tertial-work-lamp-dark-grey-80343891/ Put in a big strong white LED bulb and they're fantastic. Cheap in price, not in quality
|
# ? Jul 8, 2022 01:56 |
|
EAThief posted:Did some Legion models last month. Love the green on the dewback and the weathering on the AT-ST looks great to me!
|
# ? Jul 8, 2022 02:57 |
|
Printed and painted up one of Fabelzel's 4th ed styled Chaos Dwarfs. They've absolutely nailed the aesthetic. https://www.instagram.com/p/CfvAozAh3vv/?igshid=YmMyMTA2M2Y= Big Willy Style fucked around with this message at 03:40 on Jul 8, 2022 |
# ? Jul 8, 2022 03:34 |
|
are the Raphael 8404 still in stock for USA? I heard something about them not being?
|
# ? Jul 8, 2022 03:37 |
|
|
# ? Jun 5, 2024 06:25 |
|
GreenBuckanneer posted:are the Raphael 8404 still in stock for USA? I heard something about them not being? where would they be in stock? your question makes no sense Spanish Manlove fucked around with this message at 04:26 on Jul 8, 2022 |
# ? Jul 8, 2022 04:24 |