|
Kaddish posted:Never even heard of it but I'll check it out! I've never heard of fuckin Qumulo either lmao can anyone else vouch for them? Seems they've been around for a decade but literally never heard of them until now.
|
# ? Apr 19, 2023 20:25 |
|
|
# ? May 10, 2024 00:27 |
|
Qumulo is fine. It’s Isilon 2.0. There are some performance edge cases to be careful with.
|
# ? Apr 19, 2023 20:27 |
|
No idea if things have changed or if your budget accommodates it but I was looking around a couple years back and Qumulo said they're a six-figure price tag.
|
# ? Apr 19, 2023 20:31 |
|
They used to have just one class of storage, now it's cheaper depending on the amount of flash and interface speed. The mid tier is what used to be their only tier, you can go all nvme and pay a lot or have very little flash and that's the cheaper Archive tier
|
# ? Apr 19, 2023 20:41 |
|
Qwijib0 posted:They used to have just one class of storage, now it's cheaper depending on the amount of flash and interface speed. The mid tier is what used to be their only tier, you can go all nvme and pay a lot or have very little flash and that's the cheaper Archive tier Do you work for Qumulo or are just a big fan? Wondering cos your only posts in this thread are to rep them.
|
# ? Apr 19, 2023 20:50 |
|
Pile Of Garbage posted:Do you work for Qumulo or are just a big fan? Wondering cos your only posts in this thread are to rep them. I am a fan, I discovered this thread late so that's why it's all qumulo now. I ran a VNX unified and a nimble prior.
|
# ? Apr 19, 2023 22:15 |
|
I'm a little jealous of people who get to play with cool/large storage poo poo. Feel like that's easily my biggest technical blind spot. Somehow all of my jobs have been one of 1) No major storage needs beyond like a Synology NAS 2) Boss pathologically opposed to the concept of shared storage because it's a single point of failure or other weird excuses (running critical workloads on a single host with a big rear end disk array hanging off it is better because ????????) 3) Petabytes of NetApp but there was already a dedicated and awesome storage engineer so I never really had to deal with it These days I'm entirely working in the cloud and the only interesting aspect of storage is explaining to management how the hell they racked up a 6 figure monthly S3 bill
|
# ? Apr 19, 2023 22:50 |
|
Docjowles posted:I'm a little jealous of people who get to play with cool/large storage poo poo. Feel like that's easily my biggest technical blind spot. Somehow all of my jobs have been one of Very easily, lol.
|
# ? Apr 19, 2023 23:34 |
|
Docjowles posted:I'm a little jealous of people who get to play with cool/large storage poo poo. Feel like that's easily my biggest technical blind spot. Somehow all of my jobs have been one of My companies s3 bill is 7.5 figures.
|
# ? Apr 20, 2023 01:10 |
|
Good morning storage havers, we've got three weeks to scrape Imgur. https://forums.somethingawful.com/showthread.php?threadid=4030290&perpage=40&noseen=1 e: woops mistook this for the similarly titled NAS thread shame on an IGA fucked around with this message at 11:38 on Apr 20, 2023 |
# ? Apr 20, 2023 11:35 |
|
Methanar posted:My companies s3 bill is 7.5 figures. We're 6 figures in our cloud bill already and not even doing anything in it yet.
|
# ? Apr 20, 2023 13:39 |
|
CommieGIR posted:We're 6 figures in our cloud bill already and not even doing anything in it yet.
|
# ? Apr 20, 2023 15:09 |
|
shame on an IGA posted:Good morning storage havers, we've got three weeks to scrape Imgur. It's Waffleimages all over again
|
# ? Apr 20, 2023 15:55 |
|
I see they’ve reached the stage that every image host in history gets to eventually, no matter their initial good intentions: accceptance that storing trillions of images completely free is not a viable business model. They made it longer than most.
|
# ? Apr 20, 2023 17:13 |
|
Docjowles posted:I'm a little jealous of people who get to play with cool/large storage poo poo. Feel like that's easily my biggest technical blind spot. Somehow all of my jobs have been one of In my last job which was a decade ago now I got to do a lot more storage stuff and I do miss it. I really enjoyed doing FC fabric design and config with IBM SANs (DS-series and StoreWize V7000) and FC switches/MPRs which were just Brocade devices with IBM logos stuck to them. Coolest implementation I did was a V7000 deployment across two sites with the FC fabric extended between the sites using FCIP over a dark fibre link so that the V7000s could replicate LUNs: The IBM/Brocade FC gear was hilariously expensive. The MPRs cost AU$30k each for just the hardware and then you had to pay more for the license to enable VE ports for the backbone fabric. Also the FC switches came in 24 and 48 port models however they only came with a license to enable 8 ports so if you want to use more than 8 ports you had to buy port activation licenses in 8-port bundles. Great devices to work with though with an excellent GUI and CLI, far better than Q-Logic.
|
# ? Apr 20, 2023 18:44 |
|
Silkworm was the best product name that ever could have been invented for an FC switch, and marked the high point of Brocade as a company
|
# ? Apr 20, 2023 18:47 |
|
Pile Of Garbage posted:were just Brocade devices with IBM logos stuck to them. Seems to be very common, HPE does the same thing with StoreFabric. I guess when you don't want to be responsible for developing something as critical as Fibre channel switches, you just resell Brocade gear, especially as they're such an established player.
|
# ? Apr 20, 2023 18:48 |
|
Thanks Ants posted:Silkworm was the best product name that ever could have been invented for an FC switch, and marked the high point of Brocade as a company Brocade got acquired by Broadcom yeah? I haven't worked with them in over a decade but I'm guessing they're now probably much worse.
|
# ? Apr 20, 2023 19:01 |
|
Pile Of Garbage posted:Brocade got acquired by Broadcom yeah? I haven't worked with them in over a decade but I'm guessing they're now probably much worse.
|
# ? Apr 20, 2023 19:27 |
|
Pile Of Garbage posted:Brocade got acquired by Broadcom yeah? I haven't worked with them in over a decade but I'm guessing they're now probably much worse. I think the products are fine, but the rituals you have to perfom to get access to the firmware updates...
|
# ? Apr 20, 2023 19:34 |
|
Pile Of Garbage posted:In my last job which was a decade ago now I got to do a lot more storage stuff and I do miss it. I really enjoyed doing FC fabric design and config with IBM SANs (DS-series and StoreWize V7000) and FC switches/MPRs which were just Brocade devices with IBM logos stuck to them. Coolest implementation I did was a V7000 deployment across two sites with the FC fabric extended between the sites using FCIP over a dark fibre link so that the V7000s could replicate LUNs: My only Brocade exposure was to some of their traditional ethernet network equipment and MY GOD was it a heap of poo poo. I don't remember the details but we had an issue where running certain traffic through it from a host would cause the switch to go into a reboot loop until the host was physically disconnected from the device. Which was certainly something The FC stuff sounds like it was cool and good though.
|
# ? Apr 20, 2023 19:40 |
|
Docjowles posted:My only Brocade exposure was to some of their traditional ethernet network equipment and MY GOD was it a heap of poo poo. I don't remember the details but we had an issue where running certain traffic through it from a host would cause the switch to go into a reboot loop until the host was physically disconnected from the device. Which was certainly something Yeah their standard Ethernet stuff was always trash, but they had Fiberchannel down to a science. Sadly that hosed them in the long run.
|
# ? Apr 20, 2023 20:32 |
|
HalloKitty posted:I think the products are fine, but the rituals you have to perfom to get access to the firmware updates... I just went through this with HDS supported Brocade directors and it was a nightmare getting the code.
|
# ? Apr 20, 2023 21:17 |
|
HalloKitty posted:I think the products are fine, but the rituals you have to perfom to get access to the firmware updates... WHY is it so loving difficult?! So glad to have gotten out of storage/IT operations...
|
# ? Apr 21, 2023 02:59 |
|
Welp, just bought a NetApp c250. I haven't used Ontap in like....10 years. Looks like there's been a few changes! Learning about LUN configuration and what a SVM even is like a little baby. Edit - Looks like I need to manually enable space_alloc if I'm going to thin provision, thanks admin guide! Any Ontap gurus here have any tips for an Ontap newbie? This will be 90% Windows client general use. Kaddish fucked around with this message at 13:21 on Jun 1, 2023 |
# ? Jun 1, 2023 13:16 |
|
Is there any training/professional services hours or something included in your support agreement? Does the outfit that sold it to you provide anything like that? I'd look into that tbh. I'd hope your employer woulda factored this in when purchasing the thing.
|
# ? Jun 6, 2023 16:46 |
|
Pile Of Garbage posted:I'd hope your employer woulda factored this in when purchasing the thing.
|
# ? Jun 6, 2023 17:18 |
|
Pile Of Garbage posted:Is there any training/professional services hours or something included in your support agreement? Does the outfit that sold it to you provide anything like that? I'd look into that tbh. I'd hope your employer woulda factored this in when purchasing the thing. Ha, no there was not. We don't usually get training for stuff like this. It's happened like twice in my career.
|
# ? Jun 13, 2023 12:36 |
|
Kaddish posted:Welp, just bought a NetApp c250. I haven't used Ontap in like....10 years. Looks like there's been a few changes! Learning about LUN configuration and what a SVM even is like a little baby.
|
# ? Jun 13, 2023 18:59 |
|
As someone who has used a handful of arrays from only a few different vendors (Dell/EMC, Nimble, Pure), how much manual fuckery is needed now a days setting up a new app for block storage?
|
# ? Jun 17, 2023 21:07 |
|
Moey posted:As someone who has used a handful of arrays from only a few different vendors (Dell/EMC, Nimble, Pure), how much manual fuckery is needed now a days setting up a new app for block storage?
|
# ? Jun 20, 2023 15:28 |
|
evil_bunnY posted:Up your max inodes. By a lot. Will do, learned this same lesson when dealing with IBM Unified. I'm guessing any *nix based file is the same.
|
# ? Jun 20, 2023 15:35 |
I've been out of the enterprise storage industry for a while, which I haven't been posting much ITT - but this 30TB 2.5" U.2 Kioxia drive did catch my attention, because 40PB/rack does sound pretty good, even if the 4KB QD64 and 16KB QD32 random IOPS aren't very good, the NVMe interface still offers 2^16 queues with 2^16B each, and the sequential IOPS is pretty alright. Only real downside is that it's got a DWPD of only 1.
|
|
# ? Oct 20, 2023 18:41 |
|
BlankSystemDaemon posted:I've been out of the enterprise storage industry for a while, which I haven't been posting much ITT - but this 30TB 2.5" U.2 Kioxia drive did catch my attention, because 40PB/rack does sound pretty good, even if the 4KB QD64 and 16KB QD32 random IOPS aren't very good, the NVMe interface still offers 2^16 queues with 2^16B each, and the sequential IOPS is pretty alright. I think the PB/1RU density is for the ruler drives; I think supermicro u.2 servers top out at like 24 per U which leaves you at a paltry 30PB per rack.
|
# ? Oct 20, 2023 19:42 |
in a well actually posted:I think the PB/1RU density is for the ruler drives; I think supermicro u.2 servers top out at like 24 per U which leaves you at a paltry 30PB per rack.
|
|
# ? Oct 21, 2023 01:30 |
|
Do any of you run on-prem object stores (±1PB) you're happy with?Kaddish posted:Any Ontap gurus here have any tips for an Ontap newbie? This will be 90% Windows client general use. check your inode limits evil_bunnY fucked around with this message at 10:35 on Oct 27, 2023 |
# ? Oct 27, 2023 10:32 |
|
evil_bunnY posted:Do any of you run on-prem object stores (±1PB) you're happy with? Quite a few more petabytes than that in a Spectra tape library that is overall good, although there have been some definite pains with the separate S3 frontend software. It is definitely a "good for what it is good for, don't get sold it expecting what it isn't" deal.
|
# ? Oct 31, 2023 02:08 |
|
evil_bunnY posted:Do any of you run on-prem object stores (±1PB) you're happy with? Ceph. It’s fine. Kinda fte intensive.
|
# ? Oct 31, 2023 02:46 |
|
OnceIWasAnOstrich posted:Quite a few more petabytes than that in a Spectra tape library that is overall good, although there have been some definite pains with the separate S3 frontend software. It is definitely a "good for what it is good for, don't get sold it expecting what it isn't" deal. in a well actually posted:Ceph. It’s fine. Kinda fte intensive. looking at canonical and RH now (surely it’ll go better THIS TIME) evil_bunnY fucked around with this message at 09:20 on Oct 31, 2023 |
# ? Oct 31, 2023 09:17 |
|
|
# ? May 10, 2024 00:27 |
|
Yeah. Vendored Ceph is expensive and a real pain in the rear end if you’re not in sync with mainline Ceph development.
|
# ? Oct 31, 2023 15:09 |