|
I wonder what is up with Phison after MaxLinear walked away from buying them. That seemed like a horrible plan to me, MaxLinear doesn’t seem the type to get into sub consumer grade ssd controllers.. they’re more kinda crappy enterprise stuff!
|
# ? Nov 16, 2023 03:43 |
|
|
# ? May 13, 2024 10:43 |
|
I have an adata drive that doesn’t work with pcie passthough. So cheap drives are bad at server stuff.
|
# ? Nov 16, 2023 05:58 |
|
There aren’t any 4TB M.2 2230 drives yet, right? New Steam Deck on the way in a few weeks and I thought I might be able to put 4TB in it by now.
|
# ? Nov 16, 2023 20:42 |
|
derp, misread
|
# ? Nov 16, 2023 20:52 |
|
I think the biggest are still 2TB but iirc Micron put out 2TB NAND parts last year and 2 of those would fit on a 2230.. but nothing yet on Crucial.
|
# ? Nov 16, 2023 21:01 |
|
Subjunctive posted:There aren’t any 4TB M.2 2230 drives yet, right? New Steam Deck on the way in a few weeks and I thought I might be able to put 4TB in it by now.
|
# ? Nov 17, 2023 04:18 |
|
Does the 4TB Samsung 990 Pro have the same potential longevity bug the 1TB and 2TB ones do? There's some pretty good deals on them right now but I can't seem to find solid info other than apparently there's currently no driver updates for the 4TB model. Wondering if it's worth just paying a bit more for the WD Black SN850X 4TB.
|
# ? Nov 19, 2023 20:22 |
|
I've got a Dell laptop that I'm decommissioning, and it's too old to have the in-built ATA Secure Erase (yes it's I know diskpart will do it the hard way, but sequential overwrite of even that vintage of SSD seems needlessly tedious. Shumagorath fucked around with this message at 05:13 on Jan 28, 2024 |
# ? Nov 19, 2023 21:50 |
|
Shumagorath posted:I've got a Dell laptop that I'm decommissioning, and it's too old to have the in-built ATA Secure Erase (yes it's M.2 SATA not NVMe). Is there an NVMe-CLI equivalent for ATA, or am I stuck trying to get the manufacturer's tool to boot? The drive is two-factor BitLockered, so I could just clear the TPM, but the thing still works after nearly 10 years so I'm hoping to donate it to a local electronics reuse centre rather than send it for scrap. Yup, hdparm Edit: though why would clearing the TPM be a cause for it to be scrapped? With a bitlockered drive, clear TPM -> format drive -> reinstall windows. Secure erase not needed because leftover data was encrypted by a key that no longer exists. Mr Luxury Yacht posted:Does the 4TB Samsung 990 Pro have the same potential longevity bug the 1TB and 2TB ones do? The current 3B2QJXD7 firmware for the 990 pro came out back in May, and the 4TB model didn't come out until last month. So all 4TB drives will have the newest firmware (and therefore not have updates). AFAIK the 990 Pro problem wasn't that big a deal -- it was ticking down the wear-out number way too fast, but that was not real wear on the drive. Very annoying, but it wouldn't cause actual longevity problems. Klyith fucked around with this message at 22:49 on Nov 19, 2023 |
# ? Nov 19, 2023 22:46 |
|
Mr Luxury Yacht posted:Does the 4TB Samsung 990 Pro have the same potential longevity bug the 1TB and 2TB ones do? I just ordered the 4TB SN850X for $20 less than the 990 Pro, FYI ($229 for the SN850X, $249 for the 990 Pro). Looking at pcpartpicker that seems to be the prices at most online retailers as of now. In the US, that is.
|
# ? Nov 19, 2023 23:12 |
|
Klyith posted:Yup, hdparm
|
# ? Nov 19, 2023 23:17 |
|
sirbeefalot posted:I just ordered the 4TB SN850X for $20 less than the 990 Pro, FYI ($229 for the SN850X, $249 for the 990 Pro). Looking at pcpartpicker that seems to be the prices at most online retailers as of now. In the US, that is. Opposite here in Canada it seems. The cheapest SN850X is $374 CAD and the cheapest 990 Pro is $340 CAD. Like the 990 Pro had great reviews it's just that weird firmware issue had me wary. Especially since most posts on Reddit I can find from owners of the 4TB one say the installed and only available firmware is registering as the same revision as the problematic one, but Samsung support is claiming it's just a coincidence and it's actually a newer firmware which seems, iffy considering how much IIRC they danced around the original issue earlier this year. Mr Luxury Yacht fucked around with this message at 23:50 on Nov 19, 2023 |
# ? Nov 19, 2023 23:38 |
|
Shumagorath posted:I meant as a courtesy of giving them a truly blank drive rather than something that wakes up asking for a recovery key because that's enough to secure my data. That would be taken care of by a regular drive wipe / diskpart clean after clearing the TPM, wouldn't it? The bit that's asking for the recovery key is the windows bootloader, not the BIOS. Regardless, a hdparm secure erase will accomplish the same thing, and if you're familiar with nvme-cli then is not much more difficult. Unless this laptop has the thing where getting the drive unfrozen is a PITA.
|
# ? Nov 19, 2023 23:50 |
|
Klyith posted:That would be taken care of by a regular drive wipe / diskpart clean after clearing the TPM, wouldn't it? The bit that's asking for the recovery key is the windows bootloader, not the BIOS. e: Anyway, I don't mean to split hairs over what ends up at the e-Goodwill. Thanks for the lead; going to give it a shot now. Shumagorath fucked around with this message at 02:23 on Nov 20, 2023 |
# ? Nov 20, 2023 00:39 |
|
I got a Samsung 990 Pro 2 TB off a deal and I'm probably picking it up tomorrow. My Windows 11 is currently installed on a WD Blue SN550 NVMe (500 gb). Should I bother reinstalling/moving the installation to the 990 Pro? I'm also moving the WD Blue to a PCIe 3 slot, while the Samsung will be on a PCIe 4. I know the 990 Pro by specs is 2-3x a jump I think but as far as I know that doesn't really directly translate into real life difference. I might end up doing the moving to another drive next year though since life is so hectic right now. Maybe on the off-chance the file explorer popping out of nowhere -bug gets fixed on a clean reinstall, supposedly the latest major patch was supposed to fix it but it keeps happening. edit: I need to look into how to update the firmware on the 990 Pro asap, supposedly they're prone to brick without an update?
|
# ? Nov 20, 2023 01:54 |
|
Dessel posted:I got a Samsung 990 Pro 2 TB off a deal and I'm probably picking it up tomorrow. My Windows 11 is currently installed on a WD Blue SN550 NVMe (500 gb). Should I bother reinstalling/moving the installation to the 990 Pro? I'm also moving the WD Blue to a PCIe 3 slot, while the Samsung will be on a PCIe 4. I know the 990 Pro by specs is 2-3x a jump I think but as far as I know that doesn't really directly translate into real life difference. I would not bother at all. Even the things that do have some measurable performance boost from faster drives, you probably wouldn't be able to tell without pulling out a stopwatch. The SN550 is already a gen 3 drive, so it's not getting any worse from the move. Throw your games on the new big fast drive. Dessel posted:edit: I need to look into how to update the firmware on the 990 Pro asap, supposedly they're prone to brick without an update? The current 3B2QJXD7 firmware for the 990 pro came out back in May, and the manufacturers start shipping out drives with new firmware pretty much immediately. So unless you get one from the back of the shelf that's been sitting around for months, it'll be good out of the box. You can check the firmware revision with crystaldisk, or with samsung magician. (I'd use crystaldisk since it's a small & useful app.) You can update the firmware with samsung magician, or by making a bootable USB stick from the ISOs on their firmware page with rufus.
|
# ? Nov 20, 2023 02:26 |
|
Dessel posted:I got a Samsung 990 Pro 2 TB off a deal and I'm probably picking it up tomorrow. My Windows 11 is currently installed on a WD Blue SN550 NVMe (500 gb). Should I bother reinstalling/moving the installation to the 990 Pro? I'm also moving the WD Blue to a PCIe 3 slot, while the Samsung will be on a PCIe 4. I know the 990 Pro by specs is 2-3x a jump I think but as far as I know that doesn't really directly translate into real life difference. I might end up doing the moving to another drive next year though since life is so hectic right now. Maybe on the off-chance the file explorer popping out of nowhere -bug gets fixed on a clean reinstall, supposedly the latest major patch was supposed to fix it but it keeps happening.
|
# ? Nov 20, 2023 02:31 |
|
FLUSH testing is probably something that needs to be taken in to account with recommendations, but there needs to be more models tested. https://twitter.com/xenadu02/status/1495693475584557056 quote:Fun story: I tested a random selection of four NVMe SSDs from four vendors. Half lose FLUSH’d data on power loss. That is the flush went to the drive, confirmed, success reported all the way back to userspace. Then I manually yanked the cable. Boom, data gone.
|
# ? Nov 22, 2023 04:55 |
|
For fun you can do this yourself with spdk, a quarch, and manually managing the queues yourself MY PRODUCTS DIDNT HAVE THIS ISSUE!!! WhyteRyce fucked around with this message at 05:56 on Nov 22, 2023 |
# ? Nov 22, 2023 05:41 |
|
I wonder if the failing drives all use the same controller
|
# ? Nov 22, 2023 05:46 |
|
priznat posted:I wonder if the failing drives all use the same controller https://twitter.com/xenadu02/status/1496290369184874497
|
# ? Nov 22, 2023 05:57 |
|
it doesn't sound like he's harvesting and verifying the queues which is absolutely needed to say the drive is losing data due to power loss. but it wouldn't surprise me if there is a miss by some controllers since power loss verification is hard and I suspect vendors focus more on the "kill power and make sure drive comes back alive" and less on the "verify the accepted transactions are flushed". the former is easy to blast away at with fio and a quarch, the later is more difficult to setup. not sure if applies to client drives that have no cap, but technically if the controller can guarantee what's in the cache will be written to media during power loss (all enterprise drives), then it is considered non-volatile and flush command is a no-op WhyteRyce fucked around with this message at 10:30 on Nov 22, 2023 |
# ? Nov 22, 2023 06:18 |
|
shadow puppet of a posted:I'll post benchmarks when it arrives in three and a half months. Alright here it is the hotly awaited year-over-year comparison of aliexpress'sesses cheapest 1TB 2.5 ssd being sold over the eleventy elevents week sale. Last year was the 1TB sonnambulist which posted this: This year its the 1 TB xRayDisc which shows a marked improvement over the sonnamby and easily takes the crown as the new king of $33ish cdn ssds.
|
# ? Nov 23, 2023 02:38 |
|
WhyteRyce posted:it doesn't sound like he's harvesting and verifying the queues which is absolutely needed to say the drive is losing data due to power loss. but it wouldn't surprise me if there is a miss by some controllers since power loss verification is hard and I suspect vendors focus more on the "kill power and make sure drive comes back alive" and less on the "verify the accepted transactions are flushed". the former is easy to blast away at with fio and a quarch, the later is more difficult to setup. I wonder if a lot of the m.2 vendors are just hoping/assuming the majority of the drives will go into laptops anyway so a power cut is less likely with the internal battery. Surprised the SK Hynix one was a problem one but I think that's a pretty bargain level drive so gotta compete with the phison junk.
|
# ? Nov 23, 2023 02:44 |
|
priznat posted:Surprised the SK Hynix one was a problem one but I think that's a pretty bargain level drive so gotta compete with the phison junk. Nah the P31 was, at time of release, a fairly premium drive and holds the title of "fastest gen 3 drive". (But it also came out very late in the gen 3 cycle, so it's not that You may be thinking of the P41, which was the cheaper drive based on Intel QLC tech trading on the name of the previous gen, versus the good model being the P41 Platinum. So I guess conclusion is, now we know why the P31 was so fast. And also, curious for someone to test the P41 Platinum and see if it has the same thing.
|
# ? Nov 23, 2023 04:56 |
|
Ah yeah the P41 was the el cheapo. But still gold! Confusing branding imo.
|
# ? Nov 23, 2023 05:00 |
|
I'm using a few of those 2TB Gold P31's
|
# ? Nov 23, 2023 06:45 |
|
Canned Sunshine posted:I'm using a few of those 2TB Gold P31's I would lose exactly zero sleep about it. 1. How often do you have power loss / hard shutdown events? 2. How often will you be writing critical data at the moment of power loss, in a way such that the final write that went unflushed because the drive is cheating was the difference between good and bad outcomes? (3. Is it even a real thing? One tweet thread with zero description of methods or rigor is not a conclusive case. Was this really testing the drive, or the OS / filesystem? I'd want independent confirmation by experts before really believing.) Basically, if this is real I think it is bad. But it's bad in the way that video cards cheating on their drivers so that quake3.exe gets better performance than quack3.exe is. The badness is more about cheating the spec than the lottery-ticket odds that it will ever really make a difference. Consumer drives are already pretty meh about data integrity during a power loss. And if you are still worried, I'd suggest that what you want is an enterprise drive with true power loss protection, not a slightly different consumer drive.
|
# ? Nov 23, 2023 14:40 |
|
Klyith posted:And if you are still worried, I'd suggest that what you want is an enterprise drive with true power loss protection, not a slightly different consumer drive. there’s a lot that has to go wrong there in a specific timed sequence for you to lose important data. And if you slap the system on a UPS that’s a big mitigation right there.
|
# ? Nov 23, 2023 17:24 |
I asked about a Kingston a few pages ago and got recommended better alternatives, but none of them were discounted for Black Interval of Time. This (different) Kingston does have a discount, however. For a few more hours. https://www.komplett.no/product/1201391/datautstyr/lagring/harddiskerssd/ssd-m2/kingston-fury-renegade-pcie-m2-nvme-ssd-2tb Still risky business, or could this one be good?
|
|
# ? Nov 26, 2023 19:15 |
|
Black Griffon posted:I asked about a Kingston a few pages ago and got recommended better alternatives, but none of them were discounted for Black Interval of Time. This (different) Kingston does have a discount, however. For a few more hours. I'd say that more expensive Kingston is okay, cheaper ones I would think twice.
|
# ? Nov 26, 2023 20:13 |
makere posted:I'd say that more expensive Kingston is okay, cheaper ones I would think twice. Do you reckon this one falls into the "more expensive" category? Just for clarity.
|
|
# ? Nov 26, 2023 20:32 |
|
Black Griffon posted:Do you reckon this one falls into the "more expensive" category? Just for clarity. Yeah, that's kingston's most premium drive. It's not super special -- bog standard phision e18 controller, performance a step below the top-tier gen4 drives like a 850X or P44 Pro -- but totally fine. In the US they are overpriced, but that looks like a good price for the drive relative to norway prices.
|
# ? Nov 26, 2023 23:39 |
Cool beans, going for it then. Thanks!
|
|
# ? Nov 27, 2023 01:39 |
|
Is there any way to make things easier if I’m looking to pull the contents of a couple of drives onto a single one? Even if it’s fairly straightforward to pull anything from Steam across nowadays, I’ve realised there’s a ton of shortcuts to things and stuff like emulators with “d:\blah\things\discs” in their configs.
|
# ? Nov 27, 2023 10:06 |
|
Kerbtree posted:Is there any way to make things easier if I’m looking to pull the contents of a couple of drives onto a single one? Even if it’s fairly straightforward to pull anything from Steam across nowadays, I’ve realised there’s a ton of shortcuts to things and stuff like emulators with “d:\blah\things\discs” in their configs. If there aren't better fix, the command 'subst' can be used to make a virtual D-drive.
|
# ? Nov 27, 2023 14:49 |
|
https://www.amazon.com/HP-FX900-Pro...C86&sr=1-2&th=1 (HP FX900 Pro 4TB @ $184.99) Looks like it's got DRAM caching, a bit unclear about which controller it's using. Worth considering at all?
|
# ? Nov 28, 2023 00:36 |
|
Killer_B posted:https://www.amazon.com/HP-FX900-Pro...C86&sr=1-2&th=1 The "HP" branded SSDs are a little weird -- they're not really made by HP, but by some chinese company (BiWinTech) that did a name license deal. This means that warranty on retail drives is not done by the real HP, for example. HP does use them in their products though. So if you're looking for a major brand for extra reliability insurance, this isn't really that. I'd class them similar to Adata: not as good as the big 4, but better than the average chinesium. But that's a good price for a 4TB TLC drive with decent gen4 performance. Everything else sub-$200 is QLC or awful. Killer_B posted:a bit unclear about which controller it's using. the InnoGrit IG5236. what, haven't you heard of the InnoGrit IG5236? (ssd controllers are whatever, even realtek made a competent one)
|
# ? Nov 28, 2023 02:17 |
|
a surprising number of ssd reviews don't test sustained speeds.
|
# ? Nov 28, 2023 03:01 |
|
|
# ? May 13, 2024 10:43 |
|
where in the tier list is Team Group? paul is a big fan, which counts for something with me generally, but I don’t know much about them
|
# ? Nov 28, 2023 03:16 |