|
yes, I know of that episode, but iirc brunt et al aren't rear end men
|
# ? Apr 20, 2024 02:45 |
|
|
# ? May 28, 2024 15:57 |
|
EVGA Longoria posted:the only real format for lora is safetensors, so i'd be surprised if it's expecting anything else, is it failing to import, not loading, or just not producing results? it goes through the import dialog but the progress bar just sits at, idk, about 90% i guess. it's not a huge file so i thought it might be processing it into coreml or something, but i left my ipad on that screen when i went out with my dog earlier, and came back about 15 minutes later to it locked and asleep and draw things was still at the same percentage lol that was after force-quitting it after i thought it got stuck the first time, too e: importing even a big LoRA (or model pack, for that matter) generally doesn't take more than a couple seconds btw e2: huh looking at it again i guess it's because the lora and training data are separate? i don't think draw things lets you manually import them individually, although i know its own downloader does that for models in its pre-populated list because it shows you what it's downloading lol Beeftweeter fucked around with this message at 03:15 on Apr 20, 2024 |
# ? Apr 20, 2024 03:03 |
|
Agile Vector posted:yes, I know of that episode, but iirc brunt et al aren't rear end men i don't think they ever say what they do find attractive about ferengi
|
# ? Apr 20, 2024 03:10 |
|
Agile Vector posted:dang, gonna shelve my dreams of a fully caked up quark i can draw you a coked up quark if you want. its not gonna be pretty but i have a ballpoint pen and an envelope
|
# ? Apr 20, 2024 03:15 |
|
Agile Vector posted:dang, gonna shelve my dreams of a fully caked up quark https://civitai.com/models/253431/quark-sdxl (e: i haven't tried this either, but it's only one file and so might work? i will give it a try also) i also found these for sd 1.x: https://civitai.com/models/26458/terok-nor-21 and https://civitai.com/models/58470/terok-nor-lora you can probably tell from the urls that one is a model pack and one is a LoRA (they have the same creator and afaict the same training data). i haven't tried either one because SDXL is just so much better lol but i probably will give it a try Beeftweeter fucked around with this message at 03:23 on Apr 20, 2024 |
# ? Apr 20, 2024 03:20 |
|
Beeftweeter posted:it goes through the import dialog but the progress bar just sits at, idk, about 90% i guess. it's not a huge file so i thought it might be processing it into coreml or something, but i left my ipad on that screen when i went out with my dog earlier, and came back about 15 minutes later to it locked and asleep and draw things was still at the same percentage lol training data is irrelevant, someone just uploaded it with the model. the safetensors is all you need. If you're trying to download through the app, civitai sometimes requires logins for some models and that seems to be one, i gave it a download directly and loaded it into my phone fine with sdxl base, so that one should totally work
|
# ? Apr 20, 2024 03:23 |
|
EVGA Longoria posted:training data is irrelevant, someone just uploaded it with the model. the safetensors is all you need. If you're trying to download through the app, civitai sometimes requires logins for some models and that seems to be one, i gave it a download directly and loaded it into my phone fine with sdxl base, so that one should totally work hmm i'll give it a try again
|
# ? Apr 20, 2024 03:23 |
|
also i just tried draw things on my iphone (se3) and lmao the interface is terrible, it's way better laid out on ipad (plus you can multitask with stage manager)
|
# ? Apr 20, 2024 03:25 |
|
kvark on coke, realizing you did not mean "coke"
|
# ? Apr 20, 2024 03:30 |
|
Beeftweeter posted:https://civitai.com/models/253431/quark-sdxl (e: i haven't tried this either, but it's only one file and so might work? i will give it a try also) yesss, thanks! the quark-sdxl is fun. trying it with my usual nixonian drinking prompt gave me: tfw you're stuck on the hu-mon homeworld and you remember rom is running ferenginar
|
# ? Apr 20, 2024 05:20 |
|
I asked ChatGPT 4 for a work safe goatse close enough
|
# ? Apr 21, 2024 02:38 |
|
it’s got a gape, a manhole, and a ring… close enough in my book
|
# ? Apr 21, 2024 03:57 |
|
i mean, as far as both intent and classic requirements, that's a solid 10/10
|
# ? Apr 21, 2024 04:01 |
|
akadajet posted:I asked ChatGPT 4 for a work safe goatse WHAT IS THAT MAN DOING TO HE AINESS
|
# ? Apr 21, 2024 04:03 |
|
Video Nasty posted:WHAT IS THAT MAN DOING TO HE AINESS
|
# ? Apr 21, 2024 04:51 |
|
Carthag Tuek posted:i request an image of "tweetin beef, beeef tweet tweet" lol i fell asleep yesterday while this last one was rendering (it doesn't take that long, i was just tired) the first one used juggernaut xl with the quark LoRA, it doesn't seem to have known what to do with the prompt so for the next one i removed the quark LoRA and used dreamshaper xl turbo. it seems to have gotten the idea better, e: yet again pretty good for a model supposedly not for photorealism. but lmao @ worshirsko and odo'brien having a tweetin' beef there i also didn't sharpen these deliberately but i guess it turned out to be fine for the first one and too much for the second. incidentally i had it enabled (keep in mind these are downscaled; i had the sharpen thing at around 3.2) for some upscaling tests earlier and didn't notice it still had it enabled, oh well. i'll give the SD 1.x stuff a try in a little while Beeftweeter fucked around with this message at 15:38 on Apr 21, 2024 |
# ? Apr 21, 2024 15:11 |
|
incidentally i saw a real, actual ds9 padd prop irl and it doesn't look anything like that, lol, so i suppose they're using federation twitter or something
|
# ? Apr 21, 2024 15:15 |
|
oh also just from some limited testing that didn't turn out very funny, imo restoreformer ("face restoration") does suck. just turn it off, your results will be better off for it, the models seem to know what they're doing with faces better than whatever this thing is does
|
# ? Apr 21, 2024 15:26 |
|
Edward_Tohr posted:it’s got a gape, a manhole, and a ring… close enough in my book and a couple of fissures
|
# ? Apr 21, 2024 16:52 |
|
ok so i couldn't get the "Terok Nor (2.1)" model to output anything that wasn't just an incredible amount of noise with the prompt "tweetin beef, beef tweet tweet", no matter what settings i tried (no negative prompt) but using the LoRA works with other models (surprisingly though it doesn't work with its own model, lol), so this is what "AbsoluteReality" spit out: i could try some others with it to see what happens but i have a feeling they'd be similar. gimme some other prompts to try i guess?
|
# ? Apr 21, 2024 17:44 |
|
Beeftweeter posted:incidentally i saw a real, actual ds9 padd prop irl and it doesn't look anything like that, lol, so i suppose they're using federation twitter or something hatescrolling @RealGulDukat no doubt
|
# ? Apr 21, 2024 20:15 |
|
so i was trying out some other sdxl models i found on civit and my ipad ran out of space. well, ok, these things are saved as pngs and draw things seems to have its own thumbnails (and also doesn't delete ones you delete from the gallery, btw), so i just blasted the whole folder. hm, ipad says there's still no space. ok, so i deleted all the models i'd downloaded before, thinking draw things saves its own copy (the app was keeping ~27 gb in some sql db). hmm, ipad still says it's out of space. so i went to recently deleted, hit select all, delete. and then that finally freed it up but oops, turns out draw things actually stored the models there too. and loras. so all of those were just permanently deleted, lol ...however, the ipad says draw things is still somehow taking up 37 gb, so i just had it delete the app and rebooted. either way i had to start over, bleh but at least now i kinda know which ones are garbage and which ones aren't bad. but i also should keep an eye on managing the files better, lol e: also, to me, the 8-bit models really don't seem to have much of a loss in quality (if at all), at least for SD 1.x. i've tried fewer in SDXL but am downloading those in 8-bit now to see what they're like, but i don't really expect it to be much different. the output pngs are all 8-bit either way Beeftweeter fucked around with this message at 20:46 on Apr 21, 2024 |
# ? Apr 21, 2024 20:41 |
|
8 bit? what are you, pampered royalty? *laughs in 2.25 bit llm*
|
# ? Apr 22, 2024 11:37 |
|
Cybernetic Vermin posted:8 bit? what are you, pampered royalty? *laughs in 2.25 bit llm* draw things has quantized models in its prepopulated list. they just added juggernaut XL X (version 10 lol) in fact, and it works pretty well
|
# ? Apr 22, 2024 16:14 |
|
|
# ? Apr 22, 2024 23:12 |
|
apple released some llm's (well, small side) https://huggingface.co/apple/OpenELM. something's weird though as some of the numbers are real bad. notably their biggest tuned model scores 24.8% on mmlu, which is 4-way multiple choice, so it is worse than random. other scores are good so i'd guess it is some error. but hardly demonstrates attention to detail in the effort. i'd bet some variant of this is intended to be on the iphone 16, 3B parameters is not a very usual size, but it is one that you can easily imagine putting on a phone. so not entirely without relevance.
|
# ? Apr 24, 2024 09:17 |
|
Cybernetic Vermin posted:apple released some llm's (well, small side) https://huggingface.co/apple/OpenELM. something's weird though as some of the numbers are real bad. notably their biggest tuned model scores 24.8% on mmlu, which is 4-way multiple choice, so it is worse than random. weird, you'd expect them to put more of an effort into getting it to be in decent shape if it's meant to be some headline feature still, if it's an early release then i suppose it's early days, lol. maybe it'll improve but a 24.8% accuracy rate (yeah yeah i know if doesn't necessarily map) would be right around where siri is now lol
|
# ? Apr 24, 2024 14:28 |
|
|
# ? Apr 25, 2024 07:30 |
|
lmao
|
# ? Apr 25, 2024 14:24 |
|
what really sells it is the historical context
|
# ? Apr 28, 2024 05:16 |
|
Is he supposed to be from Louisiana? Lot of levels to the lols here
|
# ? Apr 28, 2024 05:37 |
|
ADINSX posted:Is he supposed to be from Louisiana? Lot of levels to the lols here Queensland, Australia. lol
|
# ? May 2, 2024 11:27 |
|
From 2000AD Prog477 'The Art of Kenny Who?', published in 1986
|
# ? May 4, 2024 21:42 |
|
NoneMoreNegative posted:
yeah back in 1986 they had to use those huge machines. today you can run stable diffusion on your telephone
|
# ? May 5, 2024 00:34 |
|
i just had an idea... has anyone tried hooking up a superintelligent ai system to the stock market yet as a way to earn money?
|
# ? May 9, 2024 08:21 |
|
thats my idea btw. do not steal
|
# ? May 9, 2024 08:21 |
|
fart simpson posted:i just had an idea... has anyone tried hooking up a superintelligent ai system to the stock market yet as a way to earn money? i asked my paper-based fortune teller ai (patent pending) if anyone has done this and it just says you have cooties?
|
# ? May 10, 2024 03:40 |
|
|
# ? May 11, 2024 21:45 |
|
now let’s see what’s in the pulp fiction suitcase
|
# ? May 11, 2024 21:47 |
|
|
# ? May 28, 2024 15:57 |
|
polyester concept posted:now let’s see what’s in the pulp fiction suitcase
|
# ? May 11, 2024 23:12 |