|
xzzy posted:I dig it, now someone do to a Prius C. You can defeat the TCS in the Prius, it just requires a bunch of button/pedal dancing: These steps must be completed within 60 seconds. Step 1: Set the ignition switch to ON, not READY. To do this press the power button two times, without pressing the brake pedal. Step 2: While the transmission is still in park (P), fully press the gas pedal two times. Step 3: Apply the parking brake to ensure that the vehicle will not move during this step. Put the transmission in neutral (N) and fully press the gas pedal two times. Step 4: Put the transmission back in park (P) and fully press the gas pedal two times. The car will display “!Car!” in the upper left corner of the LCD screen. Step 5: Press the brake pedal and turn the ignition switch to the start position, without going back to the ready position, to start the engine. edit: fuckin awful snipe Terrible Robot fucked around with this message at 01:35 on Apr 20, 2020 |
# ? Apr 20, 2020 01:33 |
|
|
# ? Jun 1, 2024 06:03 |
|
iospace posted:https://twitter.com/m_fiat_500/status/1251736940065386498?s=19 Hmm. I have a Prius, and I would love a Tacoma hybrid... I guess this is as close as you can get?
|
# ? Apr 20, 2020 02:05 |
|
MetaJew posted:I desperately want this Twenty Thousand Dollars for a kei truck, dang. It's cool looking but lawdy. As was said though, it isn't legal. Also as was said, you can do up a kei truck like that yourself though it won't be brand new. Buy a kei truck for 4000 bucks and spend 16,000 dollars and make it cooler than that one!
|
# ? Apr 20, 2020 05:09 |
|
I'm down, but also I need access to whatever the Japanese equivalent of JC Whitney so I can buy rad headlights, diffusers/splitters, overfenders, etc.
|
# ? Apr 20, 2020 05:31 |
|
MetaJew posted:I'm down, but also I need access to whatever the Japanese equivalent of JC Whitney so I can buy rad headlights, diffusers/splitters, overfenders, etc. Yahoo Auctions
|
# ? Apr 20, 2020 20:52 |
|
See also Up Garage and the truck version of that which is called Truck Shop Jet.
|
# ? Apr 20, 2020 21:09 |
|
BlackMK4 posted:Yahoo Auctions Apparently this is the company that mods keitrucks: https://www.facebook.com/pg/jetgogo55/posts/
|
# ? Apr 20, 2020 21:18 |
|
https://ve.media.tumblr.com/tumblr_q825jqZ86E1r2ntml.mp4
|
# ? Apr 20, 2020 22:35 |
|
Yes, but no
|
# ? Apr 20, 2020 23:50 |
|
I appreciate the preflight waggle-dance he did there.
|
# ? Apr 21, 2020 00:57 |
|
Safety Dance posted:I appreciate the preflight waggle-dance he did there. I assumed he was mixing the two stroke oil in after gassing up.
|
# ? Apr 21, 2020 01:12 |
|
This is amazing https://www.youtube.com/watch?time_continue=213&v=bRs-4AXb9_U&feature=emb_logo
|
# ? Apr 25, 2020 22:55 |
|
Not quite Colin Furze level but pretty good! (Furze would have put a 600cc motor in it)
|
# ? Apr 25, 2020 23:47 |
|
Memento posted:I assumed he was mixing the two stroke oil in after gassing up. This guy gets it. That thing loving rules sorry. It's dangerous but almost anything 2 stroke is.
|
# ? Apr 26, 2020 00:04 |
|
Applebees Appetizer posted:This is amazing The amount of time just for the stop motion. Jesus why? I mean cool but.... drat.
|
# ? Apr 26, 2020 01:57 |
|
Dave Inc. posted:The amount of time just for the stop motion. Jesus why? It's his gimmick. All his videos are made that way.
|
# ? Apr 26, 2020 02:03 |
|
Dave Inc. posted:The amount of time just for the stop motion. Jesus why? Apparently he is a video maker by profession. So think of it as one hell of an impressive audtion / advertising - much like Project Binky at it's core an insane advert for the skills of Bad Obsession Motorsport.
|
# ? Apr 26, 2020 02:51 |
|
I'd hope he has someone helping otherwise that's a lot of work. Like just the amount of time to shoot one nut being removed, never mind the welding.
|
# ? Apr 26, 2020 04:32 |
|
Applebees Appetizer posted:I'd hope he has someone helping otherwise that's a lot of work. Like just the amount of time to shoot one nut being removed, never mind the welding. Nope he does pretty much everything on his own. You should all subscribe to him because the content he produces is drat good but YouTube being YouTube, some 18-year old shouting into the camera about the new luxury car he just bought with his, I mean his parents, hard earned money will get more views.
|
# ? Apr 26, 2020 05:56 |
|
Seeing the "start" picture I admit I was going to expect him filling up the barrow with gas then drive off.
|
# ? Apr 26, 2020 11:41 |
|
Applebees Appetizer posted:I'd hope he has someone helping otherwise that's a lot of work. Like just the amount of time to shoot one nut being removed, never mind the welding. As mentioned, he actually does it all himself. He even does sleep overs in the garages where the car he is working on is.
|
# ? Apr 26, 2020 12:13 |
|
If he's got a remote shutter for the camera it wouldn't be so bad... Work a bit, step away and snap, repeat
|
# ? Apr 26, 2020 12:37 |
|
NoWake posted:If he's got a remote shutter for the camera it wouldn't be so bad... Work a bit, step away and snap, repeat I suspect this might be it, there was a sequence where a whole scene was out of focus.
|
# ? Apr 26, 2020 16:53 |
|
NoWake posted:If he's got a remote shutter for the camera it wouldn't be so bad... Work a bit, step away and snap, repeat A lot of cameras have a stop motion mode, so for the shots he's not in, he'd just need to set the frame interval and set up a beeper to remind him to move every 30 seconds or whatever.
|
# ? Apr 26, 2020 20:12 |
|
KakerMix posted:I suspect this might be it, there was a sequence where a whole scene was out of focus. https://www.youtube.com/watch?v=4bW5BLPFS7s&t=65s This is how he does it
|
# ? Apr 27, 2020 00:55 |
|
Applebees Appetizer posted:This is amazing Ye it is! Not only did he do a whole bunch of work to bring back a Range Rover from cancer, he did those amazing stop motion films while doing it, with a bit of humor as well. The best part is that this was just practice - so he could do a better job on a Lotus.
|
# ? Apr 27, 2020 02:16 |
|
https://www.youtube.com/watch?v=GhrLg6mZQIo some crazy dude making an inline 6 out of 2 inline 4 motorcycle engines.
|
# ? Apr 30, 2020 00:08 |
|
Powershift posted:https://www.youtube.com/watch?v=GhrLg6mZQIo Nice find
|
# ? Apr 30, 2020 00:12 |
|
Powershift posted:https://www.youtube.com/watch?v=GhrLg6mZQIo JFC this is absolulty amazing Edit : That whole channel is a "What the gently caress????" on Binky levels. He made a Viper V10 powered motorbike ?????? CAT INTERCEPTOR fucked around with this message at 04:02 on Apr 30, 2020 |
# ? Apr 30, 2020 03:58 |
|
https://www.youtube.com/watch?v=kdO8Yrj2oMk And a V12 Kawasaki. Holy crap this guy is out of his goddamn mind
|
# ? Apr 30, 2020 04:16 |
|
Powershift posted:https://www.youtube.com/watch?v=GhrLg6mZQIo Jesus, who is this guy? That 5 liter (!!) V-twin he built is awesome.
|
# ? Apr 30, 2020 14:19 |
|
And a V Twin made out of an aircraft radial engine https://www.youtube.com/watch?v=nnrzZQVtkeM There's not a big enough
|
# ? Apr 30, 2020 15:03 |
|
Thanks for pointing those out. I find them awesome. Funny thing is the first one I watched I'm asking myself "my god, this guy doesn't have a bandsaw while he uses a hacksaw to saw through a cylinder head." Then later he does have a bandsaw. Sure loves his swiss army knife scissors. I just figure he is mocking everyone on his abilities. edit: Should add, being humble and him just showing how a few simple machines such as a BBQ grill, dremel, welder, press, mill etc. can turn out the stuff. Colostomy Bag fucked around with this message at 15:32 on Apr 30, 2020 |
# ? Apr 30, 2020 15:21 |
|
Colostomy Bag posted:Thanks for pointing those out. I find them awesome. The video on his 100-year-old lawnmower is good, too. He just delights in machines.
|
# ? Apr 30, 2020 15:48 |
|
Powershift posted:https://www.youtube.com/watch?v=GhrLg6mZQIo Oh, wow. CAT INTERCEPTOR posted:https://www.youtube.com/watch?v=kdO8Yrj2oMk Oh, MY. Unrelated to the above, but super-cool. Cross-posting from the EV thread: Finger Prince posted:Check this oot: In the spirit of the Millyard videos above, note Webb's use of a drill press, with wooden cross-slides, as a bargain basement mill in video #4.
|
# ? Apr 30, 2020 20:51 |
|
Life goals
|
# ? Apr 30, 2020 22:03 |
|
Colostomy Bag posted:Thanks for pointing those out. I find them awesome. He is proof that you can have all the CNC machines, all the computerised lathes, all the electronic measuring and data accquisition, all the computers and applications and think you are king poo poo - then some old guy with a sliderule, a hammer, a hacksaw, a couple of files and pencil is going to make you look like a right fool. I just loooove how old school it all is. Using a BBQ to heat a cylinder head before working on it? Taking to the surface with a file? Doing everything by eye? Well that's how it used to be done and as people can see it it works spectacularly well. The extension he made to the I6 Kawaski's clutch housing cover was just a work of art and even if I knew exactly how he was going to do it I'm still cheering as each step just gets more old fashioned and the results.... oh they are just soooooo good.
|
# ? May 1, 2020 10:57 |
|
Ladas were always cool and I'm glad you now agree. https://twitter.com/petrany/status/1256164449070862337?s=19
|
# ? May 1, 2020 14:16 |
|
Olympic Mathlete posted:Ladas were always cool and I'm glad you now agree. Imagine how poo poo-terrified the guy in the back seat was by the end of the lap.
|
# ? May 1, 2020 14:52 |
|
|
# ? Jun 1, 2024 06:03 |
|
Seat Safety Switch posted:Imagine how poo poo-terrified the guy in the back seat was by the end of the lap. Reminds of the movie "Rush" where Lauda drives a crap box when some fans pick him up. Also a good one to watch is Senna basically looking at the original NSX, gets in wearing loafers and well owns. https://www.youtube.com/watch?v=8By2AEsGAhU
|
# ? May 1, 2020 15:18 |