|
gradenko_2000 posted:I wonder if anyone has ever tried to make a gimmick of a single case fan that's as large as the whole side-panel of the case If you consider the bottom of the case to be the side of the case, sure. It's the only fan mount in the entire case though https://www.monsterlabo.com/the-first (in active configuration, not passive)
|
# ? Jul 19, 2021 13:41 |
|
|
# ? Jun 5, 2024 03:12 |
|
gradenko_2000 posted:I wonder if anyone has ever tried to make a gimmick of a single case fan that's as large as the whole side-panel of the case I think most people just leave the side panel off a standard case with the box fan pointed at it though.
|
# ? Jul 19, 2021 13:50 |
|
I believe Silverstone pioneered the single-bottom-fan chimney design with the FT-03 and the FT-03 Mini.
|
# ? Jul 19, 2021 13:54 |
|
Crunchy Black posted:Its a limitation of the platform as it is, currently. Electronics create heat. If that is unconscionable to you, vote with your It's dumb that apple can sell me a whole laptop with no fans but these motherboards can't live without it.
|
# ? Jul 19, 2021 14:49 |
|
it kind of annoys me that the solution isn't some kind of standardized (idk 90 or 120mm?? smaller? idk) fan mount designed to put over the board, I'm sure there's some way to implement that design objective. that way you could add extra cooling if you wanted (similar to how blower style CPU coolers provide some cooling) with whatever properties make you happy. the problem isn't the existence of the fan, it's that the hardware design paradigm - a proprietary moving part - is something the industry has moved away from in the PC space for compelling reasons. anyone who fixes anything will have a story of a fan that went, or a friend who does. your motherboard going is the most PITA part in your pc to replace, absolute most if your PSU is modular. I mean personally my mobo doesn't even have heatsinks let alone active cooling and it works great so different products for different roles I guess!
|
# ? Jul 19, 2021 15:07 |
|
Kazinsal posted:The OG Pentium was the first x86 CPU family that really needed active cooling, but I think if you took one of the later P5 optimizations and downclocked them a bit down to the first versions' clock speeds you'd get the same performance as the originals at like a third of the TDP, so you could run them passive at like 5 watts instead of 15. Mine started clicking on my Asus x570 board. We took it apart, "fixed" it, and it worked perfectly fine for several months. Now it is clicking again. They are dumb and I hate them.
|
# ? Jul 19, 2021 15:18 |
|
gradenko_2000 posted:I wonder if anyone has ever tried to make a gimmick of a single case fan that's as large as the whole side-panel of the case Thermaltake Core V1, and it's the best case on the planet for the money
|
# ? Jul 19, 2021 15:20 |
|
Crunchy Black posted:I continue to lol at goons goonin' over something so spergy and stupid as an extra small, controllable fan. I used to work in a major multinational's NOC. I tell you the truth, fan noise of any kind is the LAST thing I wish to hear, ever. And I don't wear over-the-ear headphones because they make my ears hot and me grouchy.
|
# ? Jul 19, 2021 17:27 |
|
Crunchy Black posted:Do you all have your computers situated 4 inches from your head and never wear headphones? Look, my VR rig may not be ""comfortable"" by most peoples standards but the latency is sick and my neck is getting stronger every day
|
# ? Jul 20, 2021 18:01 |
|
CFox posted:It's dumb that apple can sell me a whole laptop with no fans but these motherboards can't live without it. I have an old, very low-powered fanless laptop. But it's certainly better option than my work laptop that I can't let do any work because of the fan.
|
# ? Jul 20, 2021 20:09 |
|
future ghost posted:The last times chipset fans were used (socket 939/775) most of them died early. More than the noise, it's introducing a tiny lovely point of failure a few years down the line, or best case adding a part that needs to be replaced. Even if you want to swap it out for a better chipset heatsink you'll need to deal with the headache of pulling the board. Not defending mobo fans but I personally have never kept an AMD board for more than 3 years. I just get the $100 Motherboard special and throw it away when it’s time to upgrade. With zen 2 tho I’m starting to stop seeing amd builds as disposable beaters.
|
# ? Jul 20, 2021 22:24 |
|
gradenko_2000 posted:I wonder if anyone has ever tried to make a gimmick of a single case fan that's as large as the whole side-panel of the case That and tarantulas or goldfish Then they grew up got jobs and neon
|
# ? Jul 20, 2021 23:01 |
|
I had I think an nForce 2 board with a chipset fan, and first the fan bearing seized and it stopped spinning, then everything melted, and finally that fan fell out of the side of my PC one day when moving it for a lan party.
|
# ? Jul 20, 2021 23:13 |
|
Twerk from Home posted:I had I think an nForce 2 board with a chipset fan, and first the fan bearing seized and it stopped spinning, then everything melted, and finally that fan fell out of the side of my PC one day when moving it for a lan party. Last time I had a chipset fan may have been nForce 2 or maybe slightly earlier. I just remember at some point after a few years of use something went wrong and it sounded like a poker card in the spokes of a bicycle except instead of the bicycle being a lovely Huffy BMX wannabe it was some professional Motocross monster tearing rear end through a world championship race. Hats off to that lovely little fan for making such an impressive amount of noise I guess. Like the world's tiniest high RPM chainsaw with throttle full open.
|
# ? Jul 21, 2021 03:18 |
|
Gwaihir posted:At the risk of going well over the top in to land, I had a hearing test 3 months ago, had no impariment at all, and in my beQuiet! (I was in fact going for silence with this build) case under my desk the whole system is almost below the room's noise floor with AC on. (I'm in Florida, so that's sorta the default state of things). Without it on, the chipset fan on my MSI x570 is still well below the minimum discernable difference. Like, cmon lol.
|
# ? Jul 22, 2021 12:16 |
|
NoDamage posted:I just put together a new build with the Asus Strix X570-I. The chipset fan spins at 6000 rpm and makes a high pitched whine and is easily the loudest thing in the case. So, I guess it depends a lot on the motherboard? I'm going to have to send this thing back and eat the restocking fee. There are differences from board to board, and there are also huge differences from person to person not just in terms of how good their hearing is but also in how much noise they think is okay, which is how we get these two camps thinking the other position is completely outlandish. Like that guy is all "what are you talking about I can barely hear my computer with the ac on" and I'm over here thinking "you can hear your computer with the ac on? That sounds awful."
|
# ? Jul 22, 2021 14:09 |
|
VorpalFish posted:There are differences from board to board, and there are also huge differences from person to person not just in terms of how good their hearing is but also in how much noise they think is okay, which is how we get these two camps thinking the other position is completely outlandish. The most important thing is to use the direct to CPU M2 socket for the SSD. Dont give the chipset anything to do and all is good. If there isnt a 0RPM mode patched in, just return the board.
|
# ? Jul 22, 2021 20:40 |
|
I finally got around to checking my fan curves for my Gigabyte Aorus Elite, and set the chipset mode to silent, which the curve auto set to turning on around 60 degrees or higher. Now it isn't spinning all the time. Am I going to cook my mobo? I have all the other fans set to run higher than default to avoid the whole ramp issue, so I'm thinking I'm okay.
|
# ? Jul 22, 2021 21:01 |
|
Max recommended operating temperature for the x570 is apparently 90 C. 60 should be safe.
|
# ? Jul 22, 2021 21:15 |
|
AutismVaccine posted:The most important thing is to use the direct to CPU M2 socket for the SSD. Dont give the chipset anything to do and all is good. If there isnt a 0RPM mode patched in, just return the board. you may also possibly just be able to take it apart and yank the chipset fan's plug from the mobo socket. Depending on the motherboard it may squawk about a failed fan, not sure if there's an easy electrical way to bypass that? in fact depending on the motherboard you may be able to remove the lovely plastic GAMER ARMOR entirely and this in fact may improve thermals. I was looking at the X570 Phantom Gaming TB/3 (being one of the only AM4 mITX boards with onboard TB3) with regards to the chipset fan and one of the comments someone made was that their thermals actually improved when they took the whole chipset fan assembly off - the lovely plastic shroud was screwing up thermals. I think manufacturers like it because of the "clean lines" but I'm actually getting to the point where I loathe those stupid plastic covers. They pretty much hurt more than they help, if you're too cheap to put a real metal heatsink on it then just loving leave it off.
|
# ? Jul 22, 2021 21:21 |
|
Dr. Video Games 0031 posted:Max recommended operating temperature for the x570 is apparently 90 C. 60 should be safe. Well, it's already turned itself back on so I think before I put a fuckoff huge 2070 Super in the chipset fan didn't run or rarely ran. Once it had a Volkswagen-sized video card hanging over it the fan seemed to get more active. I should probably blow the dust out, too, now that I think of it.
|
# ? Jul 22, 2021 21:25 |
|
Alternatively, reconfigure your airflow situation to make sure there's a case fan blowing directly over the chipset, if there isn't one already.
|
# ? Jul 22, 2021 21:38 |
|
Paul MaudDib posted:They pretty much hurt more than they help, if you're too cheap to put a real metal heatsink on it then just loving leave it off. Especially because metal vs plastic is probably like a $0.50 difference if that.
|
# ? Jul 22, 2021 21:59 |
|
SourKraut posted:Especially because metal vs plastic is probably like a $0.50 difference if that. If you sell 10,000 units of a board that's $5,000...these things matter to the bean counters
|
# ? Jul 23, 2021 03:11 |
|
AutismVaccine posted:The most important thing is to use the direct to CPU M2 socket for the SSD. Dont give the chipset anything to do and all is good. If there isnt a 0RPM mode patched in, just return the board. So why buy a mobo with an expensive, feature-loaded chipset if you are actively trying to avoid using the features?
|
# ? Jul 23, 2021 05:04 |
|
Nomyth posted:If you sell 10,000 units of a board that's $5,000...these things matter to the bean counters But now Fire Asus QA people until you are profitable again. Everyone is gonna buy your poo poo on market inertia anyways. lol buy another yacht.
|
# ? Jul 23, 2021 06:27 |
|
Ihmemies posted:So why buy a mobo with an expensive, feature-loaded chipset if you are actively trying to avoid using the features? Front USB C, Bios Flash Button, PCIe4.0, "cheapish" --> has a fan
|
# ? Jul 23, 2021 12:55 |
|
Paul MaudDib posted:you may also possibly just be able to take it apart and yank the chipset fan's plug from the mobo socket. Depending on the motherboard it may squawk about a failed fan, not sure if there's an easy electrical way to bypass that? More like GARBAGE ARMOR Plus all the loving fans are exactly covered by the new 3slot wide GPUs. I looked at all available Mobos (Jan2021), the MSI tomahawk had the best fan placement, it was like only 50% obstructed . You cant even easily mod it with a better (wider) fan, cause there is just no space. --> The whole fan fiasko is used to help selling 500$ Mobos with no fans. Or pure trolling.
|
# ? Jul 23, 2021 13:02 |
|
AutismVaccine posted:More like GARBAGE ARMOR Or, it's a first generation PCIe 4.0 chipset with a 15w TDP that either requires active cooling or a larger passive heatsink (Aorus Xtreme). The X570s refresh is legit efficiency improvements to lower the cooling budget of the chipset. Just watercool it bro
|
# ? Jul 23, 2021 13:18 |
|
"AMD CPU and Platfrom Discussion: chipset fans blow"
|
# ? Jul 23, 2021 13:20 |
|
AutismVaccine posted:More like GARBAGE ARMOR the motherboard I was referencing was a $300 one and the problem is shared on $500 ones too
|
# ? Jul 23, 2021 14:25 |
|
NoDamage posted:I just put together a new build with the Asus Strix X570-I. The chipset fan spins at 6000 rpm and makes a high pitched whine and is easily the loudest thing in the case. So, I guess it depends a lot on the motherboard? I'm going to have to send this thing back and eat the restocking fee. Like others said, it depends on the board+user+environment. I have the same board: the chipset fan hangs out around 5k RPM and I can't hear it, but I know the instant my GPU gets above 55C because I can hear its much larger fans kick on at 2k RPM ¯\_(ツ)_/¯
|
# ? Jul 23, 2021 16:49 |
|
these aren't really new per se but I haven't checked Asrock's Department of Weird poo poo in a while Threadripper TRX40 ATX format board with IPMI - for your high-clocked epyc workloads. Curious what you'd see if you took that VRM shield off, just a 5-phase? micro-ATX Epyc board, tons of SAS connectivity Naples-based Epyc Embedded for some kind of edge server maybe? (interestingly this is one of only a handful of whitebox server boards with onboard SFP! has tons of oculink and mini SAS as well.) the classic epyc socket in a mildly ITX (deep-itx) candy shell B550 with IPMI - quad Intel NICs, this would probably make an interesting little router B550 deep-itx with dual 10gbe (not really getting the point of this one, the IO seems very limited)[/url]
|
# ? Jul 23, 2021 21:51 |
|
Paul MaudDib posted:these aren't really new per se but I haven't checked Asrock's Department of Weird poo poo in a while https://www.asrockrack.com/general/productdetail.asp?Model=X570D4U-2L2T#Specifications look ma, no chipset fan. I'm tempted but ultimately for my purposes that's paying $300 for IPMI since I can get the rest cheaper.
|
# ? Jul 24, 2021 23:08 |
|
Harik posted:I'm tempted but ultimately for my purposes that's paying $300 for IPMI since I can get the rest cheaper. After all the time I've spent with IPMI on Dell, HPE and Supermicro servers, I conclude that it sucks so much I wouldn't invest on it for home use. Normal use must be possible without it and the couple times per year that it's necessary I would rather lug in a monitor and keyboard than deal with software poo poo.
|
# ? Jul 25, 2021 01:19 |
Saukkis posted:After all the time I've spent with IPMI on Dell, HPE and Supermicro servers, I conclude that it sucks so much I wouldn't invest on it for home use. Normal use must be possible without it and the couple times per year that it's necessary I would rather lug in a monitor and keyboard than deal with software poo poo. lol wot If you're doing this for work you're doing it wrong.
|
|
# ? Jul 25, 2021 02:20 |
|
Saukkis posted:After all the time I've spent with IPMI on Dell, HPE and Supermicro servers, I conclude that it sucks so much I wouldn't invest on it for home use. Normal use must be possible without it and the couple times per year that it's necessary I would rather lug in a monitor and keyboard than deal with software poo poo. Exactly. Even if it were trivial to use it's ultimately not worth a $300 upcharge. I've used the supermicro IPMI exactly twice, once for the initial install and once when doing a fairly complicated flash procedure of an ancient raid card that I wanted to have the .pdf instructions open while doing it. For my next NAS upgrade i'm just going to budget in the bits for a tinypilot or a similar setup. The only real upside to ipmi is it's an integrated console when you don't need graphics, saving you a precious pcie slot or from having to buy a processor with an igpu. maybe there's a pcie x1 cirrus logic or similar out there i could use.
|
# ? Jul 25, 2021 02:29 |
|
Harik posted:maybe there's a pcie x1 cirrus logic or similar out there i could use. https://smile.amazon.com/dp/B01E9Z2D60
|
# ? Jul 25, 2021 02:44 |
|
the fact that a card only fit to be a framebuffer still costs $60 is why I said 'cirrus logic'. You can still get matrox 550s used and that's way more than you need for a console.
|
# ? Jul 25, 2021 05:04 |
|
|
# ? Jun 5, 2024 03:12 |
|
Harik posted:Now this is pretty much perfect for a mini homelab server. dual 10gbe, ipmi, 2x m.2 nvme and dual PCIe 4.0 x8 for raid controllers. This is the board I have for my home server. But I bought it refurbed for $180 off of eBay. It is a good board, feature wise.
|
# ? Jul 26, 2021 17:47 |