|
The way I look at it I can take a month off work and have stainless 14ga custom laser cut and brake bent into the shapes needed and weld and bolt it all together and get more drawers for less monetary loss than a snapon.
|
# ? Oct 7, 2021 01:38 |
|
|
# ? Jun 4, 2024 00:02 |
|
taqueso posted:Rad. Can you show the insides of the Douglas aircraft box? Frank Dillinger posted:That Douglas box is so drat cool. Did it come with tools? It came with a few. It's kinda a long story - After my Grandfather passed in 1997, my grandmother saw the way the wind was blowing with me and decided to give the box and its contents to me, instead of my older cousins who are 15 and 18 years older than me. If you look close at that picture you can see a pink sticker on the front of it - in pencil was written "this box and all its contents are property of lobsterboyx" - on subsiquent visits from my older cousins, half the sticker was torn off and some really nice stuff was removed from it. I paint them as monsters, but they aren't and our Grandfather was really special to all of us. What steams me the most about it is that neither of them are really in to this culture, and were more of keepsakes for them and I'm over here like "but I use this stuff.." They took some really nice old well used Starret stuff, a killer old tap and die set, and some made in LA Plomb wrenches (later proto) Last laugh is on them because I bought this house back, and now I have my grandfathers garage, and the tool box.. That photo was taken when I first got the house back and I was in the process of putting grandpa's garage back to how it was. heres more details of it: by '53 he was a foreman on the line for the DC passenger planes, he oversaw all the C-47's built during wartime thats just some of the drawers with the cooler older stuff in them - all the bicycle stuff is my doing, but he did help me service my bikes before he passed. here's my main stack today this stack is right next to my bench and contains my most used tools sadly they aren't old tools, but I do have some incomplete sets. here's another top box I keep on the rack that has all my car specialty tools plus I have 2 more of these one for knicknacks and one for my metric tools (who needs those... ) in a darker, less accessible spot also while we're in here, here are some of my 40s craftsman "king seely:" power tools, bench grinder with a really cool deco stand that I think is a delta, and the drill press and my band saw. and my dewalt radial arm saw, aka the gut splitter that we've talked about before.. super compact yo... here's my craftsman table saw thanks for coming to my ted talk - im finna post this in my thread too.. LobsterboyX fucked around with this message at 04:25 on Oct 7, 2021 |
# ? Oct 7, 2021 04:17 |
|
LobsterboyX posted:
How would one overcome the logistics of powering it in the middle of the woods?
|
# ? Oct 7, 2021 13:48 |
|
That's why the saw is in the car, the generator took up all the room in the truck
|
# ? Oct 7, 2021 14:34 |
|
I would buy several ICON branded tool chests at Hobo Freight before I even thought about the slightly excessive mark-up of Snap-on or similar. I got the $3,000 73" bottom chest compared to Snap-on $14,000. Hell I would have got the $1,400 US General branded one, but I don't like drawer latches.
|
# ? Oct 7, 2021 17:44 |
|
Expensive tool boxes are just what mechanics compare like that scene with the business cards in American Psycho.
|
# ? Oct 7, 2021 18:33 |
|
slidebite posted:That's why the saw is in the car, the generator took up all the room in the truck Probably was in earlier articles. First ones started off with hauling a tractor in, installing a belt drive on one of its wheels to power a saw mill. That allowed for either building a windmill or a waterwheel for off grid power to build the cabin. Imagine the freedom. Give the wife and kids a goodbye kiss, toss a 130 lb portable saw into your trunk and away you go to build the cabin of your dreams.
|
# ? Oct 7, 2021 19:39 |
|
um excuse me posted:Wonder if anyone has taken apart the HF "red" box (it used to only be red, and come in 26 or 44 inch varieties) and upgraded the slides and whatever else makes a toolbox over 10k. I think you'd be spending more in slides than on the chest.
|
# ? Oct 7, 2021 19:54 |
|
Are there any budget drill presses that’ll do low-ish RPM for metal, say 300? I see harbor freight has a couple that never seem to be in stock locally and there’s this porter cable at Lowe’s. I’d love to spend more like $300 though. Seems like most of the cheap ones minimum rpm are more like 600-700.
|
# ? Oct 8, 2021 02:14 |
|
I got the Wen tabletop press with adjustable RPM which does a good job. I've used a 2 inch hole saw on some mild steel with it and it did okay. Just gotta use lots of cutting fluid. WEN 4208T 2.3-Amp 8-Inch 5-Speed Benchtop Drill Press https://www.amazon.com/dp/B08ZVT5JKC/
|
# ? Oct 8, 2021 02:17 |
|
powderific posted:Are there any budget drill presses that’ll do low-ish RPM for metal, say 300? I see harbor freight has a couple that never seem to be in stock locally and there’s this porter cable at Lowe’s. I’d love to spend more like $300 though. Seems like most of the cheap ones minimum rpm are more like 600-700. I can't see the price in your link, but I've got one of those at work and I can tell you that its a goddam good drill press for the money. I think we paid between 4 and 500 Canuck bucks several years ago for it. Its been worth the money. Took me 4 hours, but I got through a piece of 1 1/4" steel plate with a 2 3/4" hole saw with that poo poo.
|
# ? Oct 8, 2021 02:32 |
Any vendor recommendations on a flight case (checked luggage) for field service in the US? Just started a new job a few weeks ago and still need to order one. Would be for hard hat, fall arrest system, other PPE, and hand tools for electro-mechanical work on ASRS (automated storage and retrieval systems—think a crane that puts materials in and out of racks in a warehouse) and AGVs (automatic guided vehicles—think Roombas that move materials around warehouse) and associated conveyor style materials handling motion power poo poo The other guys are all using PelicanAir 1615TRVL which seems OK but kind of a pain to drag around job sites. The availability is limited as well. The guys on my crew aren’t exactly high speed low drag FSTs so I’m wondering if there’s a better way Klein 55473RTB seems pretty good Klein 5185ORA seems cool too tho idk how it’d do on baggage claim. My personal carry-on is a spinner so a backpack style is appealing. Plus there’s a lot of climbing to this job Anyone have any other vendor / product ideas I could look at?
|
|
# ? Oct 8, 2021 12:28 |
|
I'm guessing that's either a 1903 or M1 carbine stock standing up on the left. How close am I?
|
# ? Oct 8, 2021 13:44 |
|
eighty-four merc posted:Anyone have any other vendor / product ideas I could look at? I get why you’d want something other than that Pelican — I do video stuff and travel to job sites quite a bit and wouldn’t want to drag that around — but those Klein things don’t look that much better to me. The roller weighs 32 lbs dry, which even with the bigger wheels is gonna be a pain, and the backpack just looks like a kindof janky backpack and I would not probably want to send that through a baggage carousel. One option I do sometimes is bring a backpack + other bags ready for use inside a bigger unpadded pelican case and then unload them on site. This is a photo version that’s made to do that, but I just use my own bags in a bigger case.
|
# ? Oct 8, 2021 13:59 |
|
Anyone looking for hammers? Wilton has their 11109 B.A.S.H set on sale - but there's a better deal for $165 through Warehouse Deals. https://www.amazon.com/dp/B07D2TT1DM
|
# ? Oct 8, 2021 18:51 |
|
Does anyone have experience with compound miter saws that have the folding armature instead of the sliding rods? Looking at a 12" Delta Cruzer, but I'm worried that it's a gimmick that isn't as robust as the rods are
|
# ? Oct 8, 2021 21:14 |
|
you might glean some info from the comments here: https://toolguyd.com/delta-cruzer-sliding-miter-saws/
|
# ? Oct 8, 2021 21:18 |
|
The Door Frame posted:Does anyone have experience with compound miter saws that have the folding armature instead of the sliding rods? I hadn't seen that Delta design, but it looks similar to what Bosch did. If you're looking for something that can fit close to the wall like those saws do, check out Metabo's sliding miter, it has the rods in the front of the tool, so you can put it right up against the wall and get full stroke.
|
# ? Oct 8, 2021 21:20 |
|
BigPaddy posted:Expensive tool boxes are just what mechanics compare like that scene with the business cards in American Psycho. it even has usb power delivery
|
# ? Oct 8, 2021 21:36 |
|
The Door Frame posted:Does anyone have experience with compound miter saws that have the folding armature instead of the sliding rods? Dual axis elbowed arms are cool, and can certainly be more rigid and handle more weight, but it's a solution to a problem that doesn't exist. Saws aren't heavy enough to need them. Their description suggests gimmick more than actual performance gains.
|
# ? Oct 8, 2021 21:39 |
|
The Door Frame posted:Does anyone have experience with compound miter saws that have the folding armature instead of the sliding rods? I would play around with it in store if you can, but I can see it having the same issues as the Bosch saw. I really like my Makita 10" compound mitre and the rods are adjustable. The big question is what you'll be doing with it because a compound saw will cost more and weigh more.
|
# ? Oct 8, 2021 22:17 |
|
Bulk Vanderhuge posted:I would play around with it in store if you can, but I can see it having the same issues as the Bosch saw. Alternately, buy more of a tool than you need, because you may need it. I bought that 12" Metabo sliding compound miter saw several months back to replace my standard 10" Craftsman compound miter. I thought it'd be way more than I'd ever need, yet today I was cutting some 11" wide x 2" thick hard rock maple and the Metabo was showing strain even doing it in 3 passes. That begs the question of whether I "need" something even bigger, but you get to a point where you work with "enough." What was I doing with them? Making live edge spalted maple tops for hall tables: First one is about 36" finished length: Second one is about 53" finished length: meatpimp fucked around with this message at 22:40 on Oct 8, 2021 |
# ? Oct 8, 2021 22:36 |
|
What blade did you have in it? John Heitz on YouTube seems to use his quite a bit, but has noted blade choice is important.
|
# ? Oct 9, 2021 00:11 |
|
meatpimp posted:Alternately, buy more of a tool than you need, because you may need it. I'm on board with this idea as it's pretty much my philosophy, but again what's the intended usage? Are you going to be cutting a lot of 2x stock in a workshop? Or do you need something to lug around for shoe moulding? I thought I was going to use the mitre saw a lot before I gutted our kitchen but it's sat in the shed for the most part. For one thing it's massive and unwieldy so I don't want to drag it across my backyard everytime. The other thing is that I've been able to use a cordless circular saw and portable tablesaw for almost all of my cutting needs. I think it'll be useful eventually once I have a shop space set up and move onto furniture.
|
# ? Oct 9, 2021 00:31 |
|
the spyder posted:What blade did you have in it? John Heitz on YouTube seems to use his quite a bit, but has noted blade choice is important. It's gotta be a Diablo blade, nothing else compares for me.
|
# ? Oct 9, 2021 00:47 |
|
eighty-four merc posted:Any vendor recommendations on a flight case (checked luggage) for field service in the US? Pelican, Storm (owned by Pelican and has superior latches), or SKB. Everything else doesn't hold up. I ran a 1510 for a decade, and still have one with all my oceanographic tools for field service calls. It's been frozen on deck in Alaska and boiled in the deserts of Bahrain.
|
# ? Oct 9, 2021 03:02 |
|
StormDrain posted:It's gotta be a Diablo blade, nothing else compares for me. Hail Satan.
|
# ? Oct 9, 2021 06:20 |
|
Are the $17 hot knives on amazon going to be better than a $20 hot knife from Harbor Freight? My gut is to avoid HF because this is an electrical tool, but all it has to do is get hot so it seems like HF could figure that out? Just for cutting case foam.
|
# ? Oct 9, 2021 07:14 |
|
StormDrain posted:It's gotta be a Diablo blade, nothing else compares for me. I second this. I bought a Diablo 12” 80T for doing fine cuts on baseboard and quarter round and it’s life changing how clean it cuts. My cousin who was running the saw was also impressed and put one on her wish list then and there. Irwin’s are good too but this thing is bi-metallic bullshit and sorcery of the first kind.
|
# ? Oct 9, 2021 07:42 |
|
MomJeans420 posted:Are the $17 hot knives on amazon going to be better than a $20 hot knife from Harbor Freight? My gut is to avoid HF because this is an electrical tool, but all it has to do is get hot so it seems like HF could figure that out? Just for cutting case foam. Wouldn't be surprised if it's literally the same tool
|
# ? Oct 9, 2021 09:42 |
|
All else equal, I trust twenty dollars at Harbor Freight over seventeen dollars on Amazon. They might both be poo poo, but at least Harbor Freight sources their own poo poo. Amazon will sell anything, no questions asked.
|
# ? Oct 9, 2021 10:22 |
|
the spyder posted:What blade did you have in it? John Heitz on YouTube seems to use his quite a bit, but has noted blade choice is important. Stock blade that has cut some LVT, so I'm not really attached to it, but it cut through the 8" x 8/4 maple fine, the extra 3" in width loaded it up. StormDrain posted:It's gotta be a Diablo blade, nothing else compares for me. Yup, that'll be next cut.
|
# ? Oct 9, 2021 12:37 |
|
MomJeans420 posted:Are the $17 hot knives on amazon going to be better than a $20 hot knife from Harbor Freight? My gut is to avoid HF because this is an electrical tool, but all it has to do is get hot so it seems like HF could figure that out? Just for cutting case foam. I've got a much more expensive one: https://smile.amazon.com/dp/B07MGC3R8T/ It was $60 when I bought it. It's... Fine. The fan runs continuously when it's plugged in. I see that as a feature, because it means you won't accidentally leave it plugged in, but it's a bit annoying. I use it to cut closed cell polyethylene foam all the time, and it's holding up pretty well. The blades get caked with burnt plastic but they're easy enough to clean off in acetone.
|
# ? Oct 9, 2021 13:28 |
|
The harbor freight one is easier to warranty when it breaks in the middle of a time sensitive project.
|
# ? Oct 9, 2021 16:32 |
|
A lot of the stuff on Amazon feels like AliExpress stuff to me, and If I’m plugging it into mains power, I’d rather buy from HF than AE.
|
# ? Oct 9, 2021 18:45 |
|
um excuse me posted:Dual axis elbowed arms are cool, and can certainly be more rigid and handle more weight, but it's a solution to a problem that doesn't exist. Saws aren't heavy enough to need them. Their description suggests gimmick more than actual performance gains. It's mostly because my workbench is too short to fit a conventional compound saw, but it definitely is a very niche product or just a weird gimmick meatpimp posted:I hadn't seen that Delta design, but it looks similar to what Bosch did. If you're looking for something that can fit close to the wall like those saws do, check out Metabo's sliding miter, it has the rods in the front of the tool, so you can put it right up against the wall and get full stroke. The Metabo looks good, but ever since I talked to their rep at a trade show, I've been wary of their products. According to her, the light green Metabo is a cheaper, rebranded company they bought out to compete in the home market and the dark green is classic Metabo for professionals. I don't know if that's still the standard, but that green is kind of ambiguous to me... BraveUlysses posted:you might glean some info from the comments here: Good to hear that it's more rigid than it looks. I was suspicious of it
|
# ? Oct 9, 2021 19:01 |
|
um excuse me posted:Dual axis elbowed arms are cool, and can certainly be more rigid and handle more weight, but it's a solution to a problem that doesn't exist. Saws aren't heavy enough to need them. Their description suggests gimmick more than actual performance gains. I think the use case is about how much room they take up, not weight. They fit closer to the wall than the sliding arm saws.
|
# ? Oct 9, 2021 20:09 |
|
Unless you're using a dust collector the sawdust bag has stuck out more in every instance I know of
|
# ? Oct 9, 2021 22:33 |
|
The Door Frame posted:The Metabo looks good, but ever since I talked to their rep at a trade show, I've been wary of their products. According to her, the light green Metabo is a cheaper, rebranded company they bought out to compete in the home market and the dark green is classic Metabo for professionals. I don't know if that's still the standard, but that green is kind of ambiguous to me...
|
# ? Oct 9, 2021 22:59 |
|
|
# ? Jun 4, 2024 00:02 |
|
The Door Frame posted:It's mostly because my workbench is too short to fit a conventional compound saw, but it definitely is a very niche product or just a weird gimmick The Makita LS1019 is the one I have and you're able to fit it up against the wall (without the dust bag.) I do think the Bosch has better adjustment ergonomics but I was wary of all the comments about accuracy.
|
# ? Oct 9, 2021 23:40 |