|
qirex posted:I figured $2500 was a bit of a budget stretch and the LS50W don't support rear speakers. I was thinking of the Q-series, since you gave a list of $300-700 bookshelf speakers. Also there are decent floorstanders in/near that budget too
|
# ? Sep 30, 2021 17:32 |
|
|
# ? Jun 6, 2024 15:28 |
|
qirex posted:That is a lot of money for some pretty small speakers. I guess there's a lot of DSP too but spending that much on a system where the individual pieces are utterly useless the instant one thing goes wrong is a gamble. This is super helpful, gives me a starting point to research. The appeal on the Sony system was not having to run speaker wires. I’ll post a picture of the room, it’s not too unique but I’m not sure how to position speakers.
|
# ? Sep 30, 2021 17:52 |
|
Ok Comboomer posted:I was thinking of the Q-series, since you gave a list of $300-700 bookshelf speakers. There are dozens, if not hundreds of good bookshelf speakers under a grand, I was just mentioning some I'd heard good things about lately and are not on permanent backorder. savesthedayrocks posted:This is super helpful, gives me a starting point to research. The appeal on the Sony system was not having to run speaker wires. qirex fucked around with this message at 18:09 on Sep 30, 2021 |
# ? Sep 30, 2021 18:06 |
|
I need some help with preamps. I just got a record player that I want to run through my Denon avr, using that as a preamp. The turntable has a built-in preamp as well. My understanding is that if I’m going to use the Denon as the preamp then I need to connect the grounding cable, but if I’m going to use the turntable preamp then I can use any rca cable. My problem is that the included grounded cable is too short for where I want to put the turntable. I have a regular rca cable that’ll reach, but I can also buy a longer grounded cable if that’s better. I guess what I’m asking is if I should use the avr as a preamp or if the built-in one will be fine?
|
# ? Oct 1, 2021 23:43 |
|
What model turntable is it? Unless it’s atrociously bad the internal preamps on both the table and AVR are probably similar
|
# ? Oct 2, 2021 05:32 |
|
The turntable is a Fluance RT81 and my avr is a Denon s750h. Edit: problem solved, I went to a hifi store and the guy I talked to said I can just run pretty much any wire as a ground wire and use my longer rca cable. He recommended using the avr as a preamp. yoohoo fucked around with this message at 23:21 on Oct 2, 2021 |
# ? Oct 2, 2021 06:07 |
|
If anyone is looking for Atmos speaker system, Klipsch's set is on sale at Costco for $750. Which is quite the discount from the MSRP listed on their site. It makes me think these are hot garbage.
|
# ? Oct 17, 2021 22:03 |
|
Yeah that’s probably crappy. Reference premier is their good line.
|
# ? Oct 17, 2021 23:25 |
|
I've inherited a Polk Audio Omni SB1 Plus soundbar sans subwoofer. However, it was a wired subwoofer and the subwoofer out looks like an aux connection. If I have a mismatched subwoofer with RCA in, can I buy an aux to RCA cable and use the mismatched subwoofer with the soundbar?
|
# ? Oct 24, 2021 18:13 |
|
Should be fine but make sure it's amped and has an adjustable lpf
|
# ? Oct 24, 2021 19:04 |
|
I'm moving to a new place and need to buy a new set of speakers for my home theater. Running a Denon s650 receiver and want a solid 5.1/2 setup for movies, but I listen to a poo poo ton of music so that's important to me as well. Is there a best place I should be looking in Canada to buy speakers? I truly don't know what I'm doing, don't want to break the bank, but want to get something I'll be happy with. Should I be searching around for a used set of towers on Kijiji? Are there some brands/models I should search out that will give me good bang for my buck? Coming from a set of 5.1 monoprice elite speakers which are staying with the old house
|
# ? Oct 25, 2021 04:13 |
|
w00tmonger posted:I'm moving to a new place and need to buy a new set of speakers for my home theater. Running a Denon s650 receiver and want a solid 5.1/2 setup for movies, but I listen to a poo poo ton of music so that's important to me as well. what’s your budget?
|
# ? Oct 25, 2021 05:10 |
|
Ok Comboomer posted:what’s your budget? Probably looking at around $1k cad, but I honestly dont about where that lands me on the curve of lovely audio to crackpot audiophile to know what's reasonable. I'm not in a rush so happy to hunt for deals, happy to take my time and build it piece by piece as well
|
# ? Oct 25, 2021 06:39 |
|
w00tmonger posted:Probably looking at around $1k cad, but I honestly dont about where that lands me on the curve of lovely audio to crackpot audiophile to know what's reasonable. If you’re kitting out a full 5.1.2 system of brand new gear with $1k CAD that lands you more on the budget side of things than crackpot side, I’m afraid. Seven speakers, a sub, and a receiver all-in for $1k CAD is doable but it’d be much much better and easier if you could extend your budget to $1500 or even $2k. A decent ATMOS receiver (and I don’t mean something fancy, I mean a Yamaha from COSTCO) is going to run you like $300-$800 CAD just on its own. Edit: reread your post. You already have a receiver. Ok $1000 Canadian for 5.1.2 still isn’t the greatest budget. You’re pretty much exclusively limited to the bottom of everybody’s product stack, and that’s assuming that you really cheap out on the subwoofer. Assuming you spent $100/speaker, $200/pair, give or take (you’d probably want to spend more on the front trio and less on surrounds and height channels) you’d still have about $300 left over for a sub. trilobite terror fucked around with this message at 11:16 on Oct 25, 2021 |
# ? Oct 25, 2021 11:09 |
|
Ok Comboomer posted:If you’re kitting out a full 5.1.2 system of brand new gear with $1k CAD that lands you more on the budget side of things than crackpot side, I’m afraid. I think you misread what they posted. They are looking for 5.1 or 5.2, not an atmos set up. e: w00tmonger posted:I'm moving to a new place and need to buy a new set of speakers for my home theater. Running a Denon s650 receiver and want a solid 5.1/2 setup for movies, but I listen to a poo poo ton of music so that's important to me as well. You might be able to find some tower speakers for a steal on kijiji. I think they are cheaper to get 2nd hand since they are so loving big that people can't really sell them online as easily as the shipping fees will be huge. Otherwise just look for bookshelf speakers. For buying them new, you don't really have that many options in Canada, especially at that budget. Amazon.ca is probably your best bet, or seeing if the retailer sells direct like Fluance, Edifier and JBL do. I'd just grab this Jamos s803 set and this BIC America F12 sub. Comes in under budget which leaves you some to buy things like speaker wire(16 gauge is probably enough), an RCA cable to hook up your sub and wirecutters if you need them. I heard that the Sony SSCS5 speakers(get the matching center) and Dayton Audio Sub-1200 are also good. Someone will definitely have a better suggestion than mine. CAPTAIN CAPSLOCK fucked around with this message at 14:10 on Oct 25, 2021 |
# ? Oct 25, 2021 13:17 |
|
Thanks for the tips, I'll dig around. Yeah looking at a 5.1 or 5.2 setup. I can. Sink more than $1k into it, but moving means I have a couple other priorities as well so I'm trying to to go too hard right away. I'll see if I can sneak some sale together or go second hand on some towers to start out at least Looking around online if I'm buying new I'm probably looking at 2-300 a speaker, but I can 100% do better on Kijiji or some closeout sale w00tmonger fucked around with this message at 15:29 on Oct 25, 2021 |
# ? Oct 25, 2021 14:15 |
|
Building a system over time can work better. Maybe just start with a good pair of stereo speakers and go from there. I wouldn't be too concerned about matching speakers but I also wouldn't cheap out on a center channel if you're going to use one, it's the most important speaker for surround content by far. I would say you could get good 5.0 for a grand but unless you get a screaming deal on a good sub 5.1 is probably pushing it. There's a lot of good Canadian speaker brands like Paradigm, PSB, Axiom or Totem you might be able to get a good deal on.
|
# ? Oct 25, 2021 16:18 |
|
qirex posted:There's a lot of good Canadian speaker brands like Paradigm, PSB, Axiom or Totem you might be able to get a good deal on. All these guys will have big sales in a month
|
# ? Oct 25, 2021 20:40 |
|
Ok Comboomer posted:All these guys will have big sales in a month whats the place to look? bestbuy?
|
# ? Oct 25, 2021 21:14 |
|
w00tmonger posted:whats the place to look? bestbuy? Probably on their own websites or maybe amazon.ca Not sure if Bestbuy stocks any of those brands.
|
# ? Oct 26, 2021 00:42 |
|
w00tmonger posted:whats the place to look? bestbuy? probably not Best Buy Does Crutchfield sell in Canada? A lot of these places (PSB, Fluance, etc) have their own stores on their websites. And they often also list partner dealers in various places. Never hurts to email Canadian (or other) manufacturers and ask about dealers in your area. I know there are big specialty audio retailers in Canada, I’m just not super familiar being in the US myself.
|
# ? Oct 26, 2021 00:59 |
|
I would absolutely look around for used setups, HT people love to upgrade when they don't have to. Check canuckaudiomart, you might need to take some time to put something together from some individual purchases but it's nice to avoid the depreciation and the tax. If you absolutely want new, Elac debut 2.0 series are nice, you could get the 5.0 setup using bookshelves as fronts and rears for about $900 canadian and keep an eye out for a sub later on.
|
# ? Oct 27, 2021 15:25 |
|
The Denon AVR-S760H popped into existence out of nowhere last month and seems to be the moderately priced HDMI 2.1-compatible receiver I've been looking for. The one thing that sticks out to me on the spec sheet is that it outputs 75W per channel compared to 100W from my current Sony STR-DN1040. My instinct is that shouldn't matter because I never go anywhere near max volume. Are there other considerations with wattage? Or any obvious pitfalls I'm overlooking?
|
# ? Oct 27, 2021 16:08 |
|
It won't matter. Most speakers can do ~90+ dB off 1 watt. Volume is logarithmic, so to go 10dB louder, you need 10x the power.
|
# ? Oct 27, 2021 16:16 |
|
Thoom posted:The Denon AVR-S760H popped into existence out of nowhere last month and seems to be the moderately priced HDMI 2.1-compatible receiver I've been looking for. If you take a look at the back of the Sony and the back of the Denon you'll see the actual UL/CSA writing by the power cable shows the Sony will top out pulling 240W from the wall and the Denon is 400W. Regardless of the Sony's alleged ability to pump 100W into one channel it doesn't have the power supply to actually do it for any length of time across more than one channel. Looks like the Denon is a little more stout. Did a little more poking around, the Sony lists that 100W per channel into a 6 ohm load, two channels driven with 0.09% THD, the Denon lists 75W per channel into an 8 ohm load at 0.08%THD. They're very very very close in output with the Denon having more reserves from a better power supply by the looks of things. If anything you'll see improvements.
|
# ? Oct 27, 2021 16:32 |
|
Nice! It will be great to finally have a receiver that doesn't force me to use headphones with my PS5.
|
# ? Oct 27, 2021 16:39 |
|
Based on the model # I'd wager it's the successor to the 750 which is/was widely recommended
|
# ? Oct 27, 2021 18:11 |
|
Yeah as far as people can tell these new Denons work correctly up to 4k120 [with a caveat that PCs and receivers have never been friends]. This is nice because apparently Onkyo's supply is all stuck on parked container ships off of Long Beach.
|
# ? Oct 27, 2021 18:38 |
|
DoesNotCompute posted:I would absolutely look around for used setups, HT people love to upgrade when they don't have to.
|
# ? Oct 30, 2021 18:40 |
|
I do all my selling on USAudioMart. It’s free for non-commercial sellers, so you tend to find a lot. You can also use HifiShark to search every other site.
|
# ? Oct 30, 2021 20:51 |
|
I hope this is the right thread for this question. I was wondering if there were any suggestions for a universal remote? The remote for my Samsung TV is going and would like to get something to control the TV and Denon receiver. A harmony remote probably would've been perfect but they've been discontinued.
|
# ? Oct 31, 2021 04:30 |
|
Set up the Denon S760H yesterday and it does exactly what I need it to do so far for less than I was expecting to spend a few months ago, so that's all great. In particular, compared to my old Sony DN-1040, it boots up much faster so the TV has fewer opportunities to get confused and try to reroute audio through its own speakers. An interesting thing I've noticed is whenever I set up new audio equipment (new speakers, new receiver, etc), it sounds super weird for the first 30 minutes or so until my ears get used to it, and then it (subjectively) sounds the same as it's always sounded.
|
# ? Oct 31, 2021 20:01 |
|
Kind of stupid question: If I have a 4K TV would it be possible to use it with an old AV receiver (NAD Viso 5) that I have no plans to use for video since it only supports 1080i? Basically, all of my modern devices hooks up directly to the TV but the sound (including Netflix, etc. on the smart TV) will be outputted to the receiver which is powering up my speakers?
|
# ? Nov 2, 2021 11:55 |
|
I run optical audio out from my TV to my (prehistoric) Pioneer 5.1 receiver, it works great.
|
# ? Nov 2, 2021 12:25 |
|
Keep in mind that the highest quality formats that S/PDIF (whether coax or optical) can carry are uncompressed stereo and DTS surround. If you want to use the fancy new sound formats that generally accompany 4K content, you'll need a newer receiver with HDMI ARC/eARC.
|
# ? Nov 2, 2021 12:31 |
|
If it's this unit, then it doesn't look like it supports lossless streams like the DTS-HD MA or Dobly TrueHD. So nothing is lost by going with S/PDIF. https://nadelectronics.com/wp-content/uploads/2017/03/Data-Sheet-VISO-FIVE-DVD-CD-Surround-Sound-Receiver.pdf
|
# ? Nov 2, 2021 14:32 |
|
KozmoNaut posted:Keep in mind that the highest quality formats that S/PDIF (whether coax or optical) can carry are uncompressed stereo and DTS surround. If you want to use the fancy new sound formats that generally accompany 4K content, you'll need a newer receiver with HDMI ARC/eARC. Only eARC. Regular ARC is exactly the same as S/PDIF.
|
# ? Nov 2, 2021 14:59 |
|
SweetMercifulCrap! posted:Only eARC. Regular ARC is exactly the same as S/PDIF. Huh, I learned something today. I'm a two channel person and admittedly know much less about home theatre stuff. I just assumed ARC would at least do uncompressed 5.1.
|
# ? Nov 2, 2021 16:11 |
|
I'm looking to upgrade to a receiver that supports 2.1 gaming features, are Denons still the best entry level brand for this? Been a bit since I shipped for receivers so I'm not sure they still are. I'm eyeing the X1700H specifically.
|
# ? Nov 8, 2021 11:50 |
|
|
# ? Jun 6, 2024 15:28 |
|
Incessant Excess posted:I'm looking to upgrade to a receiver that supports 2.1 gaming features, are Denons still the best entry level brand for this? Been a bit since I shipped for receivers so I'm not sure they still are. I'm eyeing the X1700H specifically. Some Denons are, specifically the lower end ones [the X1700 is the best one with 3 working 2.1 ports]. The X1600 was a really good receiver so it's probably a safe choice. 2021 Onkyos too but they have basically no inventory for the rest of the year. Yamaha now has 2 lines of receivers that are almost a year old with every advanced feature "coming with an update" which means it will probably suck.
|
# ? Nov 8, 2021 16:51 |