|
A good friend of mine is finally approaching the finish line of a project that he has been working on for years: A 1980 Volkswagen Rabbit pickup That he has fitted a built compound turbo TDi motor into Robbed the Haldex system from an Audi TT to make it AWD With custom made 8 inch RS E52 wheels Short term next steps will be a cage that integrates the rear subframe/rear tubular arms and box flares reminiscent of old VW Golf Rally cars (and all other good 80's German cars)
|
# ? Dec 10, 2015 22:07 |
|
|
# ? Jun 5, 2024 05:12 |
|
My Rhythmic Crotch posted:this is bullshit, right? Made in dubai. Of loving course. Gonna make it an objective to go see it this christmas then.
|
# ? Dec 10, 2015 22:23 |
|
Man does the front close up of the body work look like poo poo. I don't see how that engine and all the required coolers are even going to fit in the car. Plus imagine driving and it goes from making 1000hp to 5000hp over the course of 1500 rpm. I mean, watch the videos of the P1 on street tires and that thing has major traction problems.
|
# ? Dec 10, 2015 23:17 |
|
jamal posted:Man does the front close up of the body work look like poo poo. I don't see how that engine and all the required coolers are even going to fit in the car. WONDER NO MORE!!! https://www.youtube.com/watch?v=BRyKEy54vKQ it looks like poo poo also lol at the top speed, that thing would fall apart at 200
|
# ? Dec 10, 2015 23:25 |
|
good dogge
|
# ? Dec 10, 2015 23:28 |
|
Probably faster than having your son fetch you wrenches too. "This one dad?" "No, the 9/16?" "What's 9/16? This one?" "No.. bigger than that." "This one?" *dad curses and gets up to fetch the wrench himself*
|
# ? Dec 10, 2015 23:35 |
|
xzzy posted:Probably faster than having your son fetch you wrenches too. We all started somewhere
|
# ? Dec 11, 2015 00:07 |
|
Lemme shorten that up for ya "The number written on the side" ~ kid learns a valuable life lesson that day
|
# ? Dec 11, 2015 00:11 |
|
I'm bored so here's some pictures.... Porsche 917 PA Spyder ‘1969–71 Obligatory E30 M3 [timg]http://i.imgur.com/EdNO8CP.jpg[/timg ] Badass Merc Other
|
# ? Dec 11, 2015 01:09 |
|
Is that a jet engine??
|
# ? Dec 11, 2015 04:08 |
|
Olivil posted:Is that a jet engine?? It's a turbine engine, but not a jet engine. The power turbine is hooked to a transmission and drives the wheels. Probably lifted straight out of a helicopter.
|
# ? Dec 11, 2015 04:12 |
|
NitroSpazzz posted:I'm bored so here's some pictures.... Great photos. I found higher res versions of the porsche here (just remove the resolution from the image filename) Hello new wallpapers edit: holy poo poo: Cadillac Series 61 "Le Monstre" Fayez Butts fucked around with this message at 04:47 on Dec 11, 2015 |
# ? Dec 11, 2015 04:38 |
|
Alighieri posted:WONDER NO MORE!!! Well at least we know now that the designer of the Iranian "stealth fighter" found a job.
|
# ? Dec 11, 2015 05:09 |
|
IOwnCalculus posted:We all started somewhere does that stage come before or after "hold the light"?
|
# ? Dec 11, 2015 06:37 |
|
Some work stuff I've been meaning to post: 1964 Chevrolet Bel-Air An all-stock survivor, complete with the factory 230 straight-six and 3-speed manual column shift. We're going to rebuild the front suspension and convert from manual to power-assist steering. 1967 Chevrolet Chevelle Malibu Resto-mod with a supercharged LSX. Very clean and subtle, and it ran like a beast. Finally, something kastein should enjoy: From what I was told, it's a late 1940's Willy's chassis with a late 1970's body shell. It's also has a carbureted LS3 under the hood with a 4L80 overdrive transmission, and it's only 2-wheel drive. I didn't get the chance to drive this one, that's probably a good thing.
|
# ? Dec 11, 2015 07:17 |
|
Root Bear posted:
heh
|
# ? Dec 11, 2015 07:52 |
|
Enourmo posted:heh Sand jeep, maybe? Those are often big power and RWD only.
|
# ? Dec 11, 2015 08:21 |
|
Oh I think it's great, don't get me wrong. But look at those rear tires and let yourself recognize the truth. It's a street truck.
|
# ? Dec 11, 2015 09:26 |
|
Root Bear posted:Finally, something kastein should enjoy: Hopefully this guy launches this too hard one day and flips it. It's ruined.
|
# ? Dec 11, 2015 09:35 |
|
My Rhythmic Crotch posted:this is bullshit, right? "we want to use a unique engine" *builds a siamesed LS-based V16*
|
# ? Dec 11, 2015 11:25 |
|
Alighieri posted:WONDER NO MORE!!! I don't hate this, but only because it looks like the kind of cars I drew when I was 7. If I had that level of cash though I'd want something that looked like it was out of some ridiculous cartoon like GPX Cyber Formula... ...I'd want it with the active aero so it could change from the top to bottom images too because why the gently caress not?
|
# ? Dec 11, 2015 11:40 |
|
Alighieri posted:WONDER NO MORE!!! They need to get an aerodynamicist. A plow is not an aerodynamic shape. The "wing" chord appears to be flat. I feel bad for that crank. The thing must be twisting around like string cheese. First thought: someone found a sketch made by an 8 year old that had "5000 horsey power" written on it. nollij fucked around with this message at 18:12 on Dec 11, 2015 |
# ? Dec 11, 2015 18:05 |
|
This really is the best looking engine: Untitled by Jonathan Gitlin, on Flickr Took the FF to Cars and Coffee last week, this was also in attendance. The only factory supercharged Mosler apparently: Untitled by Jonathan Gitlin, on Flickr The only other car I took my phone out for was this C7.R edition: Untitled by Jonathan Gitlin, on Flickr In my defense it was very cold, but that did mean I didn't get a shot of the F40 parked next to the Mosler. Edit: yes I did, but for some reason it wasn't uploaded to Flickr 2015-12-05 08.21.18.jpg by Jonathan Gitlin, on Flickr On the FF's Costco trip, we found this in the parking lot: Untitled by Jonathan Gitlin, on Flickr drgitlin fucked around with this message at 19:22 on Dec 11, 2015 |
# ? Dec 11, 2015 19:19 |
|
Every Typhoon I've seen the past ~10 years has looked pretty worn down. Are they not considered collectibles yet or something?
|
# ? Dec 11, 2015 19:20 |
|
Root Bear posted:Finally, something kastein should enjoy: I actually enjoy almost all the cars you post, I love seeing restored/survivor cars, just not really enough to spend money on my own. That jeep though... what the gently caress. I could care less about the Willys + 70s shell + 2wd, that's fine in a street jeep (hell, the Archer Bros raced a pair of 2wd MJs in SCCA and cleaned house with them) but what the gently caress?????? Root Bear posted:carbureted LS3 That's the turd in the punch bowl right there. e: here's some pictures since I realized I was breaking the thread rules My buddy Sam's J10 that I've posted before. He just upgraded a bunch of stuff on it... built a cage for it, a ton of armor, new beadlocks, Rhino grille, etc. Full fleet (they all drive! Factory 401 Eagle edition on the left) Just after finishing it: Snow donuts: It's still got the 60 front, 60/14 rear (can't remember which), doubler, twinsticked transfer case, NV4500 trans, LQ9 6.0L Vortec, 40" tires, etc. Probably one of my favorite J truck builds ever, Mikel's 6x6 M715 build being the other contender. kastein fucked around with this message at 19:50 on Dec 11, 2015 |
# ? Dec 11, 2015 19:41 |
|
drgitlin posted:
that loving F40
|
# ? Dec 11, 2015 20:02 |
|
|
# ? Dec 11, 2015 20:31 |
|
kastein posted:That's the turd in the punch bowl right there. Yeah, I don't get it either. None of the reasons hold up. If you do it because you hate computers, you either need a computer to run the ignition or a very spendy Ford distributor adapter. If you think you're saving money, well, neither of those options are cheap, and the carb manifold for any LSx engine is also fairly spendy. If you want it to drop in with a minimum of change to the vehicle, not going to a different engine family is certainly less of a change than a LS swap. If you really just want to have the throttle body on top of your manifold instead of in front of it, you have better choices too. I realize they don't offer that much in terms of performance, especially in terms of how much they cost, but drat do I want some.
|
# ? Dec 11, 2015 20:32 |
|
xzzy posted:Every Typhoon I've seen the past ~10 years has looked pretty worn down. Are they not considered collectibles yet or something? They were cheap for awhile, and bought by rednecks who now want a mint. Also almost every body piece is $infinity to purchase, so a lot of them now look like rear end.
|
# ? Dec 11, 2015 21:13 |
|
IOwnCalculus posted:Yeah, I don't get it either. None of the reasons hold up. If you do it because you hate computers, you either need a computer to run the ignition or a very spendy Ford distributor adapter. If you think you're saving money, well, neither of those options are cheap, and the carb manifold for any LSx engine is also fairly spendy. If you want it to drop in with a minimum of change to the vehicle, not going to a different engine family is certainly less of a change than a LS swap. Fuuuuuck. They're so expensive, but god drat are they pretty.
|
# ? Dec 11, 2015 21:23 |
|
Meaty. I quite like the standard versions of these, even the 4 door is a handsome car.
|
# ? Dec 11, 2015 21:41 |
|
Saw this Mustang today. Dunno much about it. Looks nice though.
|
# ? Dec 11, 2015 23:20 |
|
Somewhat Heroic posted:A good friend of mine is finally approaching the finish line of a project that he has been working on for years: Your friend is a hero and you should buy him am account then force him to post everything. Caddys are so rad and that is one rad caddy.
|
# ? Dec 12, 2015 00:26 |
|
holocaust bloopers posted:Saw this Mustang today. Dunno much about it. Looks nice though. Yeah, '67 is basically the most attractive year.
|
# ? Dec 12, 2015 00:32 |
|
IOwnCalculus posted:
I bet they sound like Satan rising too
|
# ? Dec 12, 2015 03:09 |
|
|
# ? Dec 12, 2015 03:15 |
|
http://www.saabplanet.com/honda-n600-with-a-saab-b234-engine-and-saab-900-drivetrain/
|
# ? Dec 12, 2015 04:56 |
|
http://i.imgur.com/nN2jKCe.gifv
|
# ? Dec 12, 2015 08:07 |
|
This is loving awesome. I think Im in love.
|
# ? Dec 12, 2015 15:49 |
|
|
# ? Jun 5, 2024 05:12 |
|
Im confused about what is happening with the throttle body on that K20, it looks like a weird little box that maybe goes straight down instead of towards the driver side?
|
# ? Dec 12, 2015 16:21 |